Antennas
Baluns
Capacitors - Low Loss
Couplers
Combiners
Diplexers
Filters - Notch, BP, LP
Inductors
IPC’s (Integrated Passive Components)
Modules
90 Hybrids
Substrates
High Frequency
Ceramic Solutions
RoHS
Compliance
2011 Edition
2
www.johansontechnology.com
4001 CALLE TECATE, CAMARILLO, CALIFORNIA 93012 • TEL (805) 389-1166 • FAX (805) 389-1821
3
www.johansontechnology.com
CONTENTS
Prototyping Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
JTISoft® Capacitor & Inductor Modeling Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Multi-Layer High-Q Capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-15
Monolithic Ceramic Chip Inductors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-19
Wire Wound Ceramic Chip Inductors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-22
Integrated Passive Component Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Antennas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Band Pass Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-28
High Pass Filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
EMI Filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Low Pass Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-29
Directional Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-31
Baluns & Balun Filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-33
Diplexers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33-34
Integrated Passive Component Case Size Drawings . . . . . . . . . . . . . . . . . . . . . . 35-36
Custom LTCC Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
LASERtrim® RF Tuning Capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-41
Broadband Single Layer Capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42-43
Single Layer Microwave Capacitors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44-49
Custom Thin Film Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-51
Technical Notes List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Chip Capacitor Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Chip Inductor & Wirewound Inductor Packaging Information . . . . . . . . . . . . . . . . . . . . . . 54
Additional application notes may be found on our web site.
The mission of the Johanson companies is to
translate our customer needs into quality electronic
components, produced in factories that are models
of excellence, supported by innovative service. With
over 20 years of experience, Johanson Technology
can provide both standard and custom technology
solutions tailored to your specific RF/Microwave
applications. Our software design tools, library
of more than 20 dielectric materials and various
metal systems, and our thin-film and thick-film
manufacturing capabilities enable us to produce
components that are ideally suited to your specific
needs.
Johanson Technology’s ISO 9001 Certified design and
manufacturing operations are located in Camarillo,
California. Our quality minded management system
utilizes the latest in computerized SPC systems
and continuous improvement programs focused
on increased product reliability, manufacturing
through-put, and production yields. Our broad
experience, applications support, software libraries,
and responsive service enhance our ability to drive
down your total cost of procurement and speed your
time to market.
Johanson Technology, Inc. reserves the right to make design and price changes without notice. All sales are subject to the
terms and conditions printed on the back side of our sales order acknowledgment forms including a limited warranty and
remedies for non-conforming goods or defective goods. We will be pleased to provide a copy of these terms and conditions
for your review.
Your Technology Partner
4
www.johansontechnology.com
4
www.johansontechnology.com
RF Ceramic Component Proto-Typing Kits
Capacitor and Inductor Design Kits
0201 L-Series Capacitors & Ceramic Inductors (Values {pF or nH} & tolerances)
P/N : L/C-201DL
50 PCS. EA. MLCC (pF): 0.3 B, 0.5 B, 0.7 B, 0.9 B, 1.0 B, 1.2 B, 1.5 B, 1.8 B, 2.2 B, 2.7 B, 3.0 B, 3.3 B, 3.6 B, 3.9 B, 4.3 B, 4.7 B, 5.1 C, 5.6 C, 6.8 C, 8.2 C, 9.1 C, 10 J, 12
J, 15 J, 18 J, 22 J, 27 J, 33 J
50 PCS. EA. MLCI (nH): 0.6 C, 0.8 C, 1.0 S, 1.2 S, 1.5 S, 1.8 S, 2.2 S, 2.4 S, 2.7 S, 3.0 S, 3.3 S, 3.7 S, 3.9 S, 4.7 S, 5.1 S, 5.6 S, 6.8 J, 8.2 J, 10 J, 12 J, 13 J, 15 J, 18 J, 20 J,
22 J, 27 J, 33 J, 39 J
0402 S-Series Capacitors & Ceramic Inductors (Values {pF or nH} & tolerances)
P/N : L/C-402DS
50 PCS. EA. MLCC (pF): 0.2 B, 0.3 B, 0.5 B, 0.7 B, 0.9 B, 1.0 B, 1.2 B, 1.5 B, 1.8 B, 2.0 B, 2.2 B, 2.4 B, 2.7 B, 3.0 B, 3.6 B, 4.3 B, 4.7 B, 5.6 C, 6.8 C, 7.5 C, 8.2 C, 9.1 C, 10
J, 12 J, 15 J, 22 J, 27 J, 30 J
50 PCS. EA. MLCI (nH): 1.0 S, 1.2 S, 1.5 S, 1.8 S, 2.2 S, 2.4 S, 2.7 S, 3.0 S, 3.3 S, 3.9 S, 4.3 S, 4.7 S, 5.1 S, 5.6 S, 6.8 J, 7.5 J, 8.2 J, 10 J, 12 J, 15 J, 18 J, 22 J, 27 J, 33 J,
39 J, 47 J, 68 J, 100 J
0603 S-Series Capacitors & Ceramic Inductors (Values {pF or nH} & tolerances)
P/N : L/C-603DS
50 PCS. EA. MLCC (pF): 0.3 B, 0.5 B, 0.8 B, 1.0 B, 1.2 B, 1.5 B, 1.8 B, 2.2 B, 2.7 B, 3.3 B, 3.6 B, 3.9 B, 4.7 B, 5.6 C, 6.8 C, 8.2 C, 10 J, 12 J, 15 J, 18 J, 20 J, 24 J, 27 J, 33
J, 39 J, 47 J, 68 J, 82 J
50 PCS. EA. MLCI (nH): 1.0 S, 1.5 S, 1.8 S, 2.2 S, 2.7 S, 3.3 S, 3.9 S, 4.7 S, 5.6 S, 6.8 J, 8.2 J, 10 J, 12 J, 15 J, 18 J, 22 J, 27 J, 33 J, 39 J, 47 J, 56 J, 68 J, 82 J, 100 J, 120
J, 150 J, 180 J, 220 J
0805 S-Series Capacitors & WireWound High Q Chip Inductors (Values {pF or nH} & tolerances)
P/N : L/C-805DS
50 PCS. EA. MLCC (pF): 4.7 B, 5.6 C, 6.8 C, 7.5 C, 8.2 C, 9.1 C, 10 J, 12 J, 15 J, 18 J, 20 J, 22 J, 24 J, 27 J, 30 J, 33 J, 36 J, 39 J, 43 J, 47 J, 56 J, 68 J, 82 J, 100 J, 120 J,
150 J, 180 J, 220 J
20 PCS. EA. (nH): 2.7 C, 3.9 C, 5.6 C, 6.8 J, 8.2 J, 12 J, 16 J, 20 J, 27 J, 33 J, 39 J, 47 J, 56 J, 68 J, 82 J, 100 J, 120 J, 150 J, 180 J, 220 J, 270 J, 330 J, 390 J, 560 J, 1000
J, 2200 J, 6800 J, 10000 J
Tuning Capacitor Kits
0201 L-Series Capacitors (Values {pF} & tolerances)
P/N: S201TL
50 PCS. EACH (pF): 0.2 A, 0.3 A, 0.4 A, 0.5 B, 0.6 B, 0.7 B, 0.8 B, 0.9 B, 1.0 B, 1.1 B, 1.2 B, 1.3 B, 1.5 B, 1.8 B, 2.0 B, 2.2 B, 2.4 B, 2.7 B, 3.0 B, 3.3 B, 3.6 B, 3.9 B, 4.3 B,
4.7 B, 5.1 C, 5.6 C, 6.2 C, 6.8 C
0402 S-Series Capacitors (Values {pF} & tolerances)
P/N: S402TS
50 PCS. EACH (pF): 0.2 A, 0.3 A, 0.4 A, 0.5 B, 0.6 B, 0.7 B, 0.8 B, 0.9 B, 1.0 B, 1.1 B, 1.2 B, 1.3 B, 1.5 B, 1.8 B, 2.0 B, 2.2 B, 2.4 B, 2.7 B, 3.0 B, 3.3 B, 3.6 B, 3.9 B, 4.3 B,
4.7 B, 5.1 C, 5.6 C, 6.2 C, 6.8 C
0603 S-Series Capacitors (Values {pF} & tolerances)
P/N: S603TS
50 PCS. EACH (pF): 0.2 B, 0.3 B, 0.4 B, 0.5 B, 0.6 B, 0.7 B, 0.8 B, 0.9 B, 1.0 B, 1.1 B, 1.2 B, 1.3 B, 1.5 B, 1.8 B, 2.0 B, 2.2 B, 2.4 B, 2.7 B, 3.0 B, 3.3 B, 3.6 B, 3.9 B, 4.3 B,
4.7 B, 5.1 C, 5.6 C, 6.2 C, 6.8 C
0805 S-Series Capacitors (Values {pF} & tolerances)
P/N: S805TS
50 PCS. EACH (pF): 0.3 B, 0.5 B, 0.7 B, 0.9 B, 1.0 B, 1.1 B, 1.2 B, 1.3 B, 1.5 B, 1.8 B, 2.0 B, 2.2 B, 2.4 B, 2.7 B, 3.0 B, 3.3 B, 3.6 B, 3.9 B, 4.3 B, 4.7 B, 5.1 C, 5.6 C, 6.2 C,
6.8 C, 7.5 C, 8.2 C, 9.1 C, 10 J
1111 E-Series Capacitors (Values {pF} & tolerances)
P/N: S111TVE
10 PCS. EACH (pF): 0.5 B, 0.6 B, 0.7 B, 0.8 B, 0.9 B, 1.0 B, 1.1 B, 1.2 B, 1.3 B, 1.5 B, 2.0 B, 2.2 B, 2.4 B, 2.7 B, 3.0 B, 3.3 B, 3.6 B, 3.9 B, 4.3 B, 4.7 B, 5.1 C, 5.6 C, 6.2 C,
6.8 C, 7.5 C, 8.2 C, 9.1 C, 10 J
Non-Magnetic Capacitor Tuning Kit
EIA 1111 S42E-Series Capacitors (Values {pF} & tolerances) Non-Magnetic
P/N: S111TUE
10 PCS. EACH (pF): 0.5 B, 0.6 B, 0.7 B, 0.8 B, 0.9 B, 1.0 B, 1.0 B, 1.1 B, 1.2 B, 1.3 B, 1.5 B, 2.0 B, 2.2 B, 2.4 B, 2.7 B, 3.0 B, 3.3 B, 3.6 B, 3.9 B 4.3 B, 4.7 B, 5.1 C, 5.6 C,
6.2 C, 6.8 C, 7.5 C, 8.2 C, 9.1 C, 10 J
Non-Magnetic Capacitor Designer Kit
EIA 1111 S42E-Series Capacitors (Values {pF} & tolerances) Non-Magnetic
P/N: S111DUE
10 PCS. EACH (pF): 1.0 B 3.9 B, 4.7 B, 6.8 C, 7.5 C, 8.2 C, 9.1 C, 10 J, 12 J, 15 J, 18 J, 20 J, 27 J, 33 J, 47 J, 56 J, 68 J, 82 J, 100 J, 120 J, 150 J, 180 J, 220 J, 270 J, 390
J, 470 J, 560 K, 1000 K
Johanson Technology’s engineering prototype kits provide RF designers with a broad selection
of high frequency ceramic components. Each kit contains a selection of components as well as
the latest product data on Johanson’s full line of “High Frequency Ceramic Solutions”. List price
is $100.00 each, but price may be waived for qualified high volume applications.
The selections
listed below represents typical kit contents. Johanson reserves the right to make limited value/tolerance
substitutions when necessary. Please advise any critical values at time of order.
5
www.johansontechnology.comwww.johansontechnology.com
Tuning Capacitor Kits
0402 WireWound High Q Chip Inductors (Values {nH} & tolerances)
P/N: L402W
20 PCS. EACH (nH): 1.0 C, 1.8 C, 2.0 C, 2.7 C, 3.3 C, 3.9 C, 4.7 C, 5.6 C, 6.8 J, 7.5 J, 8.2 J, 9.0 J, 10 J, 12 J, 15 J, 18 J, 20 J, 22 J, 24 J, 27 J, 30 J, 33 J, 39 J, 47 J, 56 J,
82 J, 100 J, 120 J
0603 WireWound High Q Chip Inductors (Values {nH} & tolerances)
P/N: L603W
20 PCS. EACH (nH): 1.6 C, 1.8 C, 2.0 C, 3.9 C, 4.7 C, 5.1 C, 5.6 C, 6.8 J, 7.5 J, 8.2 J, 10 J, 12 J, 15 J, 18 J, 22 J, 27 J, 33 J, 39 J, 47 J, 56 J, 68 J, 72 J, 82 J, 100 J, 150 J,
180 J, 270 J, 330 J
0805 WireWound High Q Chip Inductors (Values {nH} & tolerances)
P/N: L805W
20 PCS. EACH (nH): 2.7 C, 3.9 C, 5.6 C, 6.8 J, 8.2 J, 12 J, 16 J, 20 J, 27 J, 33 J, 39 J, 47 J, 56 J, 68 J, 82 J, 100 J, 120 J, 150 J, 180 J, 220 J, 270 J, 330 J, 390 J, 560 J,
1000 J, 2200 J, 6800 J, 10000 J
its
0201 L-Series Capacitors (Values {pF} & tolerances)
P/N: S201DL
50 PCS. EACH (pF): 0.3 B, 0.5 B, 0.7 B, 0.9 B, 1.0 B, 1.2 B, 1.5 B, 1.8 B, 2.2 B, 2.7 B, 3.0 B, 3.3 B, 3.6 B, 3.9 B, 4.3 B, 4.7 B, 5.1 C, 5.6 C, 6.8 C, 8.2 C, 9.1 C, 10 J, 12 J,
15 J, 18 J, 22 J, 27 J, 33 J
0201 Inductors (Values {nH} & tolerances)
P/N: L201DC
50 PCS. EACH (nH): 0.6 C, 0.8 C, 1.0 S, 1.2 S, 1.5 S, 1.8 S, 2.2 S, 2.4 S, 2.7 S, 3.0 S, 3.3 S, 3.7 S, 3.9 S, 4.7 S, 5.1 S, 5.6 S, 6.8 J, 8.2 J, 10 J, 12 J, 13 J, 15 J, 18 J, 20 J,
22 J, 27 J, 33 J, 39 J
0402 S-Series Capacitors (Values {pF} & tolerances)
P/N: S402DS
50 PCS. EACH (pF): 0.2 B, 0.3 B, 0.5 B, 0.7 B, 0.9 B, 1.0 B, 1.2 B, 1.5 B, 1.8 B, 2.0 B, 2.2 B, 2.4 B, 2.7 B, 3.0 B, 3.6 B, 4.3 B, 4.7 B, 5.6 C, 6.8 C, 7.5 C, 8.2 C, 9.1 C, 10 J,
12 J, 15 J, 22 J, 27 J, 30 J
0402 Inductors (Values {nH} & tolerances)
P/N: L402DC
50 PCS. EACH (nH): 1.0 S, 1.2 S, 1.5 S, 1.8 S, 2.2 S, 2.4 S, 2.7 S, 3.0 S, 3.3 S, 3.9 S, 4.3 S, 4.7 S, 5.1 S, 5.6 S, 6.8 J, 7.5 J, 8.2 J, 10 J, 12 J, 15 J, 18 J, 22 J, 27 J, 33 J, 39
J, 47 J, 68 J, 100 J
0603 S-Series Capacitors (Values {pF} & tolerances)
P/N: S603DS
50 PCS. EACH (pF): 0.3 B, 0.5 B, 0.8 B, 1.0 B, 1.2 B, 1.5 B, 1.8 B, 2.2 B, 2.7 B, 3.3 B, 3.6 B, 3.9 B, 4.7 B, 5.6 C, 6.8 C, 8.2 C, 10 J, 12 J, 15 J, 18 J, 20 J, 24 J, 27 J, 33 J,
39 J, 47 J, 68 J, 82 J
0603 Inductors (Values {nH} & tolerances)
P/N: L603DC
50 PCS. EACH (nH): 1.0 S, 1.5 S, 1.8 S, 2.2 S, 2.7 S, 3.3 S, 3.9 S, 4.7 S, 5.6 S, 6.8 J, 8.2 J, 10 J, 12 J, 15 J, 18 J, 22 J, 27 J, 33 J, 39 J, 47 J, 56 J, 68 J, 82 J, 100 J, 120 J,
150 J, 180 J, 220 J
0805 S-Series Capacitors (Values {pF} & tolerances)
P/N: S805DS
50 PCS. EACH (pF): 4.7 B, 5.6 C, 6.8 C, 7.5 C, 8.2 C, 9.1 C, 10 J, 12 J, 15 J, 18 J, 20 J, 22 J, 24 J, 27 J, 30 J, 33 J, 36 J, 39 J, 43 J, 47 J, 56 J, 68 J, 82 J, 100 J, 120 J,
150 J, 180 J, 220 J
1111 E-Series Capacitors (Values {pF} & tolerances)
P/N: S111DVE
10 PCS. EACH (pF): 1.0 B, 3.9 B, 4.7 B, 6.8 C, 7.5 C, 8.2 C, 9.1 C, 10 J, 12 J, 15 J, 18 J, 20 J, 27 J, 33 J, 47 J, 56 J, 68 J, 82 J, 100 K, 120 K, 150 K, 180 K, 220 K, 270 K,
390 K, 470 K, 560 K, 1000 K
(Individual) Capacitor, Inductor Designer Kits
2.45GHz Designer Kit for WLAN, Bluetooth, Zigbee, ISM and 802.11
0402 S-Series Capacitors, 0402 Inductors & 2.45 GHz RF Components
P/N: 2450L/C402D
6 PCS. EA. BAND PASS FILTERS: 2450BP07A100 , 2450BP15B100
6 PCS. EA. CHIP ANTENNA: 2450AT18A100, 2450AT18B100, 2450AT42A100, 2450AT42B100, 2450AT43A100 , 2450AT43B100, 2450AT45A100
6 PCS. EA. LOW PASS FILTER: 2450LP14A100, 2450LP14B100, 2450LP15A050 6 PCS. EA. HIGH PASS FILTER: 2450HP14A100
6 PCS. EA. BALUN: 2450BL14C050, 2450BL14C100, 2450BL15B050, 2450BL15B100, 2450BL15B200
6 PCS. EA. FILTER BALUN: 2450FB15A050, 2450FB39A050 6 PCS. EA. DIPLEXER: 2450DP15A5512, 2450DP15D5400
50 PCS. EA. MLCC (pF): 0.3 B. 0.5 B. 1.0 B, 1.5 B, 1.8 B, 2.2 B, 2.7 B, 3.3 B, 3.9 B, 4.7 B, 5.6 C, 6.8 C, 8.2 C, 10 J
50 PCS. EA. MLCI (nH): 1.0 S,1.5 S, 1.8 S, 2.2 S, 2.7 S, 3.3 S, 4.7 S, 5.6 S, 6.8 J, 8.2 J, 10 J, 15 J, 18 J, 27 J
0603 S-Series Capacitors, 0603 Inductors & 2.45 GHz RF Components
P/N: 2450L/C603D
6 PCS. EA. BAND PASS FILTERS: 2450BP07A100 , 2450BP15B100
6 PCS. EA. CHIP ANTENNA: 2450AT18A100, 2450AT18B100, 2450AT42A100, 2450AT42B100, 2450AT43A100, 2450AT43B100, 2450AT45A100
6 PCS. EA. LOW PASS FILTER: 2450LP14A100, 2450LP14B100, 2450LP15A050 6 PCS. EA. HIGH PASS FILTER: 2450HP14A100
6 PCS. EA. BALUN: 2450BL14C050, 2450BL14C100, 2450BL15B050, 2450BL15B100, 2450BL15B200
6 PCS. EA. FILTER BALUN: 2450FB15A050, 2450FB39A050 6 PCS. EA. DIPLEXER: 2450DP15A5512, 2450DP15D5400
50 PCS. EA. MLCC (pF): 0.3 B, 0.5 B, 1.0 B, 1.5 B, 1.8 B, 2.2 B, 2.7 B, 3.3 B, 3.9 B, 4.7 C, 5.6 C, 6.8 C, 8.2 C, 10 J
50 P CS. EA. MLCI (nH): 1.0 S, 1.5 S, 1.8 S, 2.2 S, 2.7 S, 3.3 S, 4.7 S, 5.6 S, 6.8 J, 8.2 J, 10 J, 15 J, 18 J, 27 J
Single Layer Capacitor Kits
Broadband Single Layer Capacitors
P/N: GBBL
10 PCS. EACH: V01A151MT, V02A471MT, V02A102MT, V03A102MT, V04A182MT
WireWound Inductor Kits
6
www.johansontechnology.comwww.johansontechnology.com
JTISOFT
®
CAPACITOR & INDUCTOR MODELING SOFTWARE
JTIsoft® consists of two advanced design simulation software programs which offer component modeling from 1 MHz to 20 GHz. MLCsoft® provides S-
Parameter and SPICE modeling data for six different size high frequency multi-layer ceramic capacitors (MLCCs) chip sizes while MLIsoft® provides S-Parameter
and SPICE modeling on four different size high frequency multi-layer ceramic inductors (MLCIs). The main interface screen displays electrical parameters such
as SRF, PRF1, PRF2, ESR, Q, Ceff, Leff, Rdc, and Idc which are updated dynamically as chip size, value, and frequency parameters are varied by the user. The
complete part number is also dynamically displayed for ordering accuracy.
Both programs also provide highly detailed graphical plots of device performance over a user specified frequency range. The chart displays are instantly updated
as the user makes component or frequency changes. Smith chart displays of both impedance and S11/S22 are available as point plots, line plots, and line-point
plots. Traditional X-Y graphs are available for parameters of S21 and S11 both phase and magnitude, Impedance magnitude, as well as Q, ESR and effective
capacitance. Display formats include standard, log Y, and log/log. Chart may be exported in BMP or Metafile format. Numerical S-Parameter data may be
displayed and exported as an .S2P format file.
5.5GHz Designer Kit for WLAN, Bluetooth, ISM and 802.11
0402 S-Series Capacitors, 0402 Inductors & RF Components
P/N: 5500L/C402D
6 PCS. EA. BAND PASS FILTERS: 5515BP15C1020, 5515BP15B725, 5515BP15B730, 5515BP15C975, 5487BP15B675, 5487BP15C675
6 PCS. EA. CHIP ANTENNA: 2450AD46A5400, 5250AT43A200, 5400AT18A1000, 5775AT43A100 6 PCS. EA. LOW PASS FILTER 5515LP15A730
6 PCS. EA. BALUN: 5400BL15B050, 5400BL15B100, 5400BL15K050, 5512BL15B100, 5800BL15B100
6 PCS. EA. DIPLEXER: 2450DP15A5512, 2450DP15B5512, 2450DP15D5400, 2450DP15E5400
50 PCS. EA. MLCC (pF): 0.3 B, 0.5 B, 0.8 B, 1.0 B, 1.2 B, 1.5 B, 1.8 B, 2.0 B, 2.2 B, 2.7 B, 3.3 B, 3.9 B, 4.7 B, 5.6 C
50 PCS. EA. MLCI (nH): 1.0 S, 1.5 S, 1.8 S, 2.2 S, 2.7 S, 3.3 S, 3.9 S, 4.7 S, 5.6 S, 6.8 J, 8.2 J, 10 J, 12 J, 15 J
0603 S-Series Capacitors, 0603 Inductors & RF Components
P/N: 5500L/C603D
6 PCS. EA. BAND PASS FILTERS: 5515BP15C1020, 5515BP15B725, 5515BP15B730, 5515BP15C975, 5487BP15B675, 5487BP15C675
6 PCS. EA. CHIP ANTENNA: 2450AD46A5400, 5250AT43A200, 5400AT18A1000, 5775AT43A100 6 PCS. EA. LOW PASS FILTER 5515LP15A730
6 PCS. EA. BALUN: 5400BL15B050, 5400BL15B100, 5400BL15K050, 5512BL15B100, 5800BL15B100
6 PCS. EA. DIPLEXER: 2450DP15A5512, 2450DP15B5512, 2450DP15D5400, 2450DP15E5400
50 PCS. EA. MLCC (pF): 0.3 B, 0.5 B, 0.8 B,1.0 B, 1.2 B,1.5 B, 1.8 B, 2.0 B, 2.2 B, 2.7 B, 3.3 B, 3.9 B, 4.7 B, 5.6 C
50 PCS. EA. MLCI (nH): 1.0 S, 1.5 S, 1.8 S, 2.2 S, 2.7 S, 3.3 S, 3.9 S, 4.7 S, 5.6 S, 6.8 J, 8.2 J, 10 J, 12 J, 15 J
JTIsoft® is available for download from our web site.
Designer Kit for WiMAX & UWB
0402 S-Series Capacitors, 0402 Inductors & RF Components
P/N: WUWBL/C402D
6 PCS. EA. CHIP ANTENNA: 2500AT44M0400, 3100AT51A7200 6 PCS. EA. LOW PASS FILTER 3550LP14A300
6 PCS. EA. BAND PASS FILTERS: 2500BP15M400, 3600BP15M600, 4000BP15U1800, 5130BP18U4060
6 PCS. EA. BALUN: 2500BL14M050, 2450BL14M100, 3600BL14M050, 3600BL14M100, 4000BL14U100
6 PCS. EA. FILTER BALUN: 2345FB39A0050, 2595FB39A0050, 3500FB39A0050
50 PCS. EA. MLCC (pF): 0.3 B. 0.5 B. 1.0 B, 1.5 B, 1.8 B, 2.2 B, 2.7 B, 3.3 B, 3.9 B, 4.7 B, 5.6 C, 6.8 C, 8.2 C, 10 J
50 PCS. EA. MLCI (nH): 1.0 S,1.5 S, 1.8 S, 2.2 S, 2.7 S, 3.3 S, 4.7 S, 5.6 S, 6.8 J, 8.2 J, 10 J, 15 J, 18 J, 27 J
0603 S-Series Capacitors, 0603 Inductors & RF Components
P/N: WUWBL/C603D
6 PCS. EA. CHIP ANTENNA: 2500AT44M0400, 3100AT51A7200 6 PCS. EA. LOW PASS FILTER 3550LP14A300
6 PCS. EA. BAND PASS FILTERS: 2500BP15M400, 3600BP15M600, 4000BP15U1800, 5130BP18U4060
6 PCS. EA. BALUN: 2500BL14M050, 2450BL14M100, 3600BL14M050, 3600BL14M100, 4000BL14U100
6 PCS. EA. FILTER BALUN: 2345FB39A0050, 2595FB39A0050, 3500FB39A0050
50 PCS. EA. MLCC (pF): 0.3 B. 0.5 B. 1.0 B, 1.5 B, 1.8 B, 2.2 B, 2.7 B, 3.3 B, 3.9 B, 4.7 B, 5.6 C, 6.8 C, 8.2 C, 10 J
50 PCS. EA. MLCI (nH): 1.0 S,1.5 S, 1.8 S, 2.2 S, 2.7 S, 3.3 S, 4.7 S, 5.6 S, 6.8 J, 8.2 J, 10 J, 15 J, 18 J, 27 J
Standard Termination for all kits - 100% Sn. Consult Factory for other termination options
7
www.johansontechnology.com
These lines of multilayer capacitors have been developed for
High-Q and microwave applications.
•
The S-Series (R03S, R07S, R14S, R15S) capacitors give an
ultra-high Q performance, and exhibit NP0 temperature char-
acteristics.
•
The L-Series (R05L) capacitors give mid-high Q performance,
and exhibit NP0 temperature characteristics.
•
The E-Series (S42E, S48E, S58E) capacitors give excellent
high-Q performance from HF to Microwave frequencies.
Typical uses are high voltage, high current applications. They
are offered in chip (Ni barrier or Non-Magnetic Pt.-Ag) or in
Non-Magnetic leaded form.
•
The W-Series (R05W) capacitors offer a large capacitance
value in an ultra-small 0201 package size. These exhibit a X7R
temperature characteristic.
•
RoHS compliance is standard for all unleaded parts (see
termination options box).
MULTI-LAYER HIGH-Q CAPACITORS
HOW TO ORDER
Part Number written: 252S48E470KV4E
VOLTAGE (DC)
6R3 = 6.3 V
160 = 16 V
250 = 25 V
500 = 50 V
201 = 200 V
251 = 250 V
501 = 500 V
102 = 1000 V
152 = 1500 V
202 = 2000 V
252 = 2500 V
362 = 3600 V
502 = 5000 V
722 = 7200 V
252
CASE SIZE
R03 (01005)
R05 (0201)
R07 (0402)
R14 (0603)
R15 (0805)
S42 (1111)
S48 (2525)
S58 (3838)
S48 470
TOLERANCE
A = ± 0.05 pF
B = ± 0.10 pF
C = ± 0.25 pF
D = ± 0.50 pF
F = ±1 %
G = ±2%
J = ±5%
K = ± 10%
For tolerance
availability, see chart.
K
MARKING
3 = Cap Code
& Tolerance
4 = No Marking
6 = EIA Code
(Marking on
0805 and
larger only)
4
TERMINATION
Nickel Barrier
V = Ni/Sn (Green)
T = Ni/SnPb
G = Ni/Au (Green)
Non-Mag*
U = Cu/Sn (Green)
C = Cu/SnPb
Leaded (All Non-Mag)*
1 = Microstrip
2 = Axial Ribbon
3 = Axial Wire
4 = Radial Ribbon
5 = Radial Wire
V
CAPACITANCE (pF)
1st two digits are
signifi cant; third digit
denotes number of
zeros, R = decimal.
100 = 10 pF
101 = 100 pF
PACKAGING
S = Bulk
W = Waffle Pack
01005 - 0603
Y = Paper 5” Reel
T = Paper 7” Reel
*R = Paper 13” Reel
0805 - 3838
Z = Embossed 5” Reel
E = Embossed 7” Reel
*U = Embossed 13” Reel
Tape specifications
conform to EIA RS481
E
DIELECTRIC
S = Ultra High Q NPO
L = High Q NPO
E = Ultra High Q NPO,
High Voltage, High Power,
W= X7R
E
T
H
•
u
a
•
a
•
h
T
a
N
•
“*” - Not available for all MLCC - Call factory for info.
8
www.johansontechnology.com
Miniature Size - Portable Electronics RF Power Applications
01005
(R03S)
0201 (R05) 0402
(R07S)
0603
(R14S)
0805
(R15S)
1111
(S42E)
2525**
(S48E)
3838**
(S58E)
NPO
(R05L) X7R*
(R05W)
Capacitance Voltage
pF Code
0.1 0R1
A
B
C
D
0.2 0R2 16 V 25 V 50/200 V 250 V 500V 1000V
0.3 0R3 16 V 25 V 50/200 V 250 V 250 V 500V 1000V
0.4 0R4 16 V 25 V 50/200 V 250 V 250 V 500V 1000V
0.5 0R5 16 V 25 V 50/200 V 250 V 250 V 500V 1000V
0.6 0R6 16 V 25 V 50/200 V 250 V 250 V 500V 1000V
0.7 0R7 16 V 25 V 50/200 V 250 V 250 V 500V 1000V
0.8 0R8 16 V 25 V 50/200 V 250 V 250 V 500V 1000V
0.9 0R9 16 V 25 V 50/200 V 250 V 250 V 500V 1000V
1.0 1R0 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
1.1 1R1 16 V 25 V 50/200 V 250 V 250 V 500V 1000V
1.2 1R2 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
1.3 1R3 16 V 25 V 50/200 V 250 V 250 V 500V 1000V
1.4 1R4 16 V 25 V 50/200 V 250 V 250 V 500V 1000V
1.5 1R5 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
1.6 1R6 16 V 25 V 50/200 V 250 V 250 V 500V 1000V
1.7 1R7 16 V 25 V 50/200 V 250 V 250 V 500V 1000V
1.8 1R8 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
1.9 1R9 16 V 25 V 50/200 V 250 V 250 V 500V 1000V
2.0 2R0 16 V 25 V 50/200 V 250 V 250 V 500V 1000V
2.1 2R1 16 V 25 V 50/200 V 250 V 250 V 500V 1000V
2.2 2R2 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
2.4 2R4 16 V 25 V 50/200 V 250 V 250 V 500V 1000V
2.7 2R7 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
3.0 3R0 16 V 25 V 50 V 250 V 250 V 500V 1000V
3.3 3R3 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
3.6 3R6 16 V 25 V 50 V 250 V 250 V 500V 1000V
3.9 3R9 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
4.3 4R3 16 V 25 V 50 V 250 V 250 V 500V 1000V
4.7 4R7 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
5.1 5R1 B
C
D
16 V 25 V 50 V 250 V 250 V 500V 1000V
5.6 5R6 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
6.2 6R2 16 V 25 V 50 V 250 V 250 V 500V 1000V
6.8 6R8 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
7.5 7R5 16 V 25 V 50 V 250 V 250 V 500V 1000V
8.2 8R2 16 V 25 V 50 V 250 V 250 V 500V 1000V
9.1 9R1 16 V 25 V 50 V 250 V 250 V 500V 1000V
10 100
F
G
J
K
16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
11 110 16 V 25 V 50 V 250 V 250 V
12 120 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
13 130 16 V 25 V 50 V 250 V 250 V 500V 1000V
15 150 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
16 160 16 V 25 V 50 V 250 V 250 V 500V 1000V
18 180 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
20 200 25 V 50 V 250 V 250 V 500V 1000V
22 220 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
24 240 25 V 50 V 250 V 250 V 500V 1000V
27 270 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
30 300 25 V 50 V 250 V 250 V 500V 1000V
33 330 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
LOW ESR / HIGH-Q CAPACITOR SELECTION CHART
EIA Size
Cap. Value
* The R05W parts, which are X7R, can only be provided with “K” tolerance.
Consult factory for Non-Standard values.
9
www.johansontechnology.com
Miniature Size - Portable Electronics RF Power Applications
01005
(R03S)
0201 (R05) 0402
(R07S)
0603
(R14S)
0805
(R15S)
1111
(S42E)
2525**
(S48E)
3838**
(S58E)
NPO
(R05L) X7R*
(R05W)
Capacitance Toler-
ance Voltage
pF Code
36 360
F
G
J
K
25 V 250 V 250 V 500V 1000V
39 390 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
43 430 25 V 250 V 250 V 500V 1000V
47 470 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
51 510 25 V 250 V 250 V 500V 1000V
56 560 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
62 620 25 V 250 V 250 V 500V 1000V
68 680 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
75 750 25 V 250 V 250 V 500V 1000V
82 820 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
91 910 25 V 250 V 250 V 500V 1000V
100 101 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V
110 111 16 V 250 V 500V
120 121 250 V 500V 2500V 3600V 5000V
130 131 250 V 500V
150 151 250 V 500V 2500V 3600V 5000V
160 161 250 V 500V
180 181 250 V 500V 2500V 3600V 5000V
200 201 250 V 500V
220 221 16 V 250 V 500V 2500V 3600V
240 241 500V
270 271 500V 2500V 3600V
300 301 500V
330 331 500V 1500V 3600V
360 361 500V
390 391 500V 1500V 3600V
430 431
G
J
K
500V
470 471 16 V 500V 1500V 2500V
510 511 500V
560 561 500V 1000V 2500V
620 621 500V
680 681 16 V 50V 1000V 2500V
750 751 50V
820 821 16 V 50V 1000V 1000V
910 911 50V
1000 102 10 V 50V 1000V 1000V
1200 122 1000V 1000V
1500 152 500V 1000V
1800 182 500V 1000V
2200 222 10 V 300V 1000V
2700 272 300V 500V
3300 332 500V
3900 392 500V
4700 472 10 V 500V
5100 512 500V
10000 103 6.3 V
LOW ESR / HIGH-Q CAPACITOR SELECTION CHART
EIA Size
Cap. Value
* The R05W parts, which are X7R, can only be provided with “K” tolerance.
Consult factory for Non-Standard values.
10
www.johansontechnology.comwww.johansontechnology.com
MECHANICAL & ENVIRONMENTAL CHARACTERISTICS
SPECIFICATION
TEST PARAMETERS
SOLDERABILITY:
Solder coverage ≥ 90% of metalized areas Preheat chip to 120°-150°C for 60 sec., dip terminals in rosin flux
No termination degradation then dip in Sn62 solder @ 240°±5°C for 5±1 sec
RESISTANCE TO
No mechanical damage Preheat device to 80°-100°C for 60 sec.
SOLDERING HEAT:
Capacitance change: ±2.5% or 0.25pF followed by 150°-180°C for 60 sec.
Q>500 I.R. >10 G Ohms Dip in 260°±5°C solder for 10±1 sec.
Breakdown voltage: 2.5 x WVDC Measure after 24±2 hour cooling period
TERMINAL
Termination should not pull off. Linear pull force* exerted on axial leads soldered to each terminal.
ADHESION:
Ceramic should remain undamaged. *0402 ≥ 2.0lbs, 0603 ≥ 2.0lbs (min.)
PCB DEFLECTION:
No mechanical damage. Glass epoxy PCB: 0.5 mm deflection
Capacitance change: 2% or 0.5pF Max
LIFE TEST:
No mechanical damage Applied voltage: 200% rated voltage, 50 mA max.
Capacitance change: ±3.0% or 0.3 pF Temperature: 125°±3°C
Q>500 I.R. >1 G Ohms Test time: 1000+48-0 hours
Breakdown voltage: 2.5 x WVDC
THERMAL CYCLE:
No mechanical damage. 5 cycles of: 30±3 minutes @ -55°+0/-3°C,
Capacitance change: ±2.5% or 0.25pF 2-3 min. @ 25°C, 30±3 min. @ +125°+3/-0°C,
Q>2000 I.R. >10 G Ohms 2-3 min. @ 25°C
Breakdown voltage: 2.5 x WVDC Measure after 24±2 hour cooling period
HUMIDITY,
No mechanical damage. Relative humidity: 90-95%
STEADY STATE:
Capacitance change: ±5.0% or 0.50pF max. Temperature: 40°±2°C
Q>300 I.R. ≥ 1 G-Ohm Test time: 500 +12/-0 Hours
Breakdown voltage: 2.5 x WVDC Measure after 24±2 hour cooling period
HUMIDITY,
No mechanical damage. Applied voltage: 1.5 VDC, 50 mA max.
LOW VOLTAGE:
Capacitance change: ±5.0% or 0.50pF max. Relative humidity: 85±2% Temperature: 40°±2°C
Q>300 I.R. = 1 G-Ohm min. Test time: 240 +12/-0 Hours
Breakdown voltage: 2.5 x WVDC Measure after 24±2 hour cooling period
VIBRATION:
No mechanical damage.
Capacitance change: ±2.5% or 0.25pF Cycle performed for 2 hours in each of three perpendicular directions
Q>1000 I.R. ≥ 10 G-Ohm Frequency range 10Hz to 55 Hz to 10 Hz traversed
Breakdown voltage: 2.5 x WVDC in 1 minute. Harmonic motion amplitude: 1.5mm
DIELECTRIC CHARACTERISTICS NPO X7R
0 ± 30ppm /°C, -55 to 125°C
Q
>1,000 @ 1 MHz, Typical 10,000
>10 GΩ @ 25°C,WVDC;
125°C IR is 10% of 25°C rating
2.5 X WVDC Min., 25°C, 50 mA max
1MHz ±50kHz, 1.0±0.2 VRMS, 25°C
Size 01005: 0.2 - 10 pF
Size 0201: 0.2 - 100 pF
Size 0402: 0.2 - 33 pF
Size 0603: 0.2 - 100 pF
Size 0805: 0.3 - 220 pF
Size 1111: 0.2 - 1000 pF
Size 2525: 1.0 - 2700 pF
Size 3838: 1.0 - 5100 pF
± 15%, -55 to 125°C
16VDC DF
≤ 3.5% @ 1 KHz, 25°C
10VDC DF
≤ 5.0% @ 1 KHz, 25°C
>500 ΩF* or 10 GΩ* @ 25°C,WVDC;
125°C IR is 10% of 25°C rating
* whichever is less
2.5 X WVDC Min., 25°C, 50 mA max
1KHz ±50Hz, 1.0±0.2 VRMS, 25°C
100 - 10,000 pF
TEMPERATURE COEFFICIENT:
QUALITY FACTOR / DF:
INSULATION RESISTANCE:
DIELECTRIC STRENGTH:
TEST PARAMETERS:
AVAILABLE CAPACITANCE:
11
www.johansontechnology.comwww.johansontechnology.com
Size Units Length Width Thickness End Band
01005 In
.016 ±.001 .008 ±.001 .008 ±.001 .006 Max.
(0402) mm
(0.40 ±0.03) (0.20 ±0.03) (0.20 ±0.03) (0.15 Max.)
0201 In
.024 ±.001 .012 ±.001 .012 ±.001 .008 Max.
(0603) mm
(0.60 ±0.03) (0.30 ±0.03) (0.30 ±0.03) (0.20 Max.)
0402 In
.040 ±.004 .020 ±.004 .020 ±.004 .010 ±.006
(1005) mm
(1.02 ±0.1) (0.51 ±0.1) (0.51 ±0.1) (0.25 ±.15)
0603 In
.062 ±.006 .032 ±.006 .030 +.005/-.003 .014 ±.006
(1608) mm
(1.57 ±0.15) (0.81 ±0.15) (0.76 +.13-.08) (0.35 ±.15)
0805 In
.080 ±.008 .050 ±.008 .040 ±.006 .020 ±.010
(2012) mm
(2.03 ±0.20) (1.27 ±0.20) (1.02 ±.15) (0.50 ±.25)
MECHANICAL CHARACTERISTICS
12
www.johansontechnology.com
Lead Size Units L Tol W Tol T (max) E/B (typ) LL(min) X Tol e Tol
1
S42E In 0.135 +/- .015 0.110 +/- .020 0.120 0.015 0.25 0.093 +/-0.005 0.004 +/- 0.001
mm 3.43 +/- 0.38 2.79 +/- 0.51 3.05 0.38 6.35 2.36 +/- 0.13 0.102 +/- 0.025
S48E In 0.245 +/- 0.025 0.250 +/- 0.015 0.160 0.025 0.50 0.240 +/- 0.005 0.004 +/- 0.001
mm 6.22 +/- 0.64 6.35 +/-0.38 3.81 0.63 12.7 6.10 +/- 0.13 0.102 +/- 0.025
S58E In 0.38 +0.035 / - 0.010 0.38 +/- 0.010 0.170 0.04 MAX. 0.750 0.35 +/- 0.010 0.010 +/- 0.005
mm 9.65 +0.89 / -0.25 9.65 +/- 0.25 4.32 1.02 MAX. 19.05 8.89 +/- 0.25 0.25 +/- 0.13
2
S42E In 0.135 +/- .015 0.110 +/- .020 0.102 0.015 0.25 0.093 +/-0.005 0.004 +/- 0.001
mm 3.43 +/- 0.38 2.79 +/- 0.51 2.59 0.38 6.35 2.36 +/- 0.13 0.102 +/- 0.025
S48E In 0.245 +/- 0.025 0.250 +/- 0.015 0.160 0.025 0.50 0.240 +/- 0.005 0.004 +/- 0.001
mm 6.22 +/- 0.64 6.35 +/-0.38 3.81 0.63 12.7 6.10 +/- 0.13 0.102 +/- 0.025
S58E In 0.38 +0.035 / - 0.010 0.38 +/- 0.010 0.170 0.04 MAX. 0.750 0.35 +/- 0.010 0.010 +/- 0.005
mm 9.65 +0.89 / -0.25 9.65 +/- 0.25 4.32 1.02 MAX. 19.05 8.89 +/- 0.25 0.25 +/- 0.13
3S42E S48E
S58E
In 0.145 +/- .020 0.110 +/- .015 0.102 0.50 #26 AWG, .016 (.406) dia. nominal
mm 3.68 +/- 0.51 2.79 +/- 0.38 2.59 12.70
4S42E S48E
S58E
In 0.135 +/- .015 0.110 +/- .015 0.102 0.25 0.093 +/-0.005 0.004 +/- 0.001
mm 3.43 +/- 0.38 2.79 +/- 0.38 2.59 6.35 2.36 +/- 0.13 0.102 +/- 0.025
5S42E S48E
S58E
In 0.145 +/- .020 0.110 +/- .015 0.102 0.50 #26 AWG, .016 (.406) dia. nominal
mm 3.68 +/- 0.51 2.79 +/- 0.38 2.59 12.70
Termination Size Units L Tol W Tol T E / B Tol
V, T
U,C
S42E In 0.110 +.020 -.010 0.110 +/- .015 0.102 Max. 0.015 Typ. +/- 0.008
mm 2.79 +0.51 -0.25 2.79 +/- 0.38 2.59 Max. 0.38 Typ. +/- 0.20
S48E In 0.230 +.025 -.010 0.250 +/- .015 0.150 Max. 0.025 Typ.
mm 5.84 +0.63 -0.25 6.35 +/- 0.38 3.81 Max. 0.63 Typ.
S58E In 0.380 +.015 -.010 0.380 +/- .010 0.170 Max. 0.025 Typ.
mm 9.65 +0.38 -0.25 9.65 +/- 0.25 4.32 Max. 0.63 Typ.
For all E-Series Models:
OPERATING TEMP. :
-55 to +125°C
INSULATION RESISTANCE:
>1000 ΩF or >10 GΩ,
whichever is less
@ 25°C WVDC
TEMPERATURE COEFFICIENT:
0 ± 30ppm /°C, -55 to 125°C
DISSIPATION FACTOR (TYP.):
< 0.05% @ 1 MHz
E-SERIES TERMINATIONS AND LEADS
Unleaded Termination Codes “V” (Ni/Sn),
“T” (Ni/SnPb), “U” (Cu/Sn non-mag), “C”
(Cu/SnPb non-mag)
Microstrip Ribbon Leads (Non-Magnetic),
Termination Code “1”
Axial Ribbon Leads (Non-Magnetic), Ter-
mination Code “2”
Axial Wire Leads (Non-Magnetic),
Termination Code “3”
Radial Ribbon Leads (Non-Magnetic),
Termination Code “4”
Radial Wire Leads (Non-Magnetic),
Termination Code “5”
L
E/B
T
W
,
E
T
7
LLLL
8
,
E
T
7
LLLL
8
4
,
,,
7
4
,
,,
E
X
,,
X
7
7
4
,
,,
13
www.johansontechnology.com
0.5
1.0
10.0
25.0
Frequency (GHz)
Capacitance (pF)
0.1 110 100 200
R05/0201
R07/0402
R14/0603
R15/0805
Typical Series Resonant Frequency (Series Mounted)
0.01
0.1
1
0500 1000 1500 2000 2500
ESR (Ohms)
Frequency (MHz)
0.5 pF
1.2 pF
3.3 pF
5.6 pF
8.2 pF
22 pF
ESR vs Frequency: 0201/R05L
1
10
100
1000
10000
0500 1000 1500 2000 2500
Q
Frequency (MHz)
0.5 pF
1.2 pF
3.3 pF
5.6 pF
8.2 pF
22 pF
Q vs Frequency: 0201/R05L
0.01
0.1
1
0.5 1 10 50
ESR (Ohms)
Capacitance (pF)
150-250MHz
900-1000MHz
1900-2000MHz
2100-2250MHz
ESR vs Capacitance: 0201/R05L
Q vs Capacitance: 0201/R05L
RF CHARACTERISTICS - L-SERIES
SERIES RESONANCE CHART
14
www.johansontechnology.com
Measurements performed on a Boonton 34A Resonant Coaxial Line and represent typical capacitor performance.
H
0.01
0.1
1
0 500 1000 1500 2000 2500
ESR (Ohms)
Frequency (MHz)
3.3 pF
10 pF
15 pF
33 pF
47 pF
Equivalent Series Resistance: 0603/R14S
1
10
100
1000
10000
0 500 1000 1500 2000 2500
Q
Frequency (MHz)
3.3 pF
10 pF
15 pF
33 pF
47 pF
Q Factor: 0603/R14S
0.01
0.1
1
0 500 1000 1500 2000 2500
ESR (Ohms)
Frequency (MHz)
0.5 pF
1.2 pF
4.7 pF
8.2 pF
10 pF
15 pF
Equivalent Series Resistance: 0402/R07S
1
10
100
1000
10000
0 500 1000 1500 2000 2500
Q
Frequency (MHz)
0.5 pF
1.2 pF
4.7 pF
8.2 pF
10 pF
15 pF
Q Factor: 0402/R07S
S-SERIES RF CHARACTERISTICS VERSUS FREQUENCY
1
10
100
1000
10000
0 500 1000 1500 2000 2500
Q
4.7pF 15pF 47pF
100pF 220pF
Fre quency (MHz)
Q Factor: 0805/R15S
0.01
0.1
1
0 500 1000 1500 2000 2500
ESR (Ohms)
4.7 pF 15 pF 47 pF 100 pF 220pF
Frequency (Mhz)
Equivalent Series Resistance: 0805/R15S
15
www.johansontechnology.com
S-SERIES RF CHARACTERISITCS VERSUS CAPACITANCE
0.01
0.1
1
11050
ESR (Ohms)
Capacitance (pF)
150-250MHz
900-1000MHz
1900-2000MHz
2100-2250MHz
Equivalent Series Resistance: 0603/R14S
1
10
100
1000
10000
11050
Q
Capacitance (pF)
150-250MHz
900-1000MHz
1900-2000MHz
2100-2250MHz
Q Factor: 0603/R14S
0.01
0.1
1
0.5 1 10
ESR (Ohms)
Capacitance (pF)
150-250MHz
900-1000MHz
1900-2000MHz
2100-2250MHz
Equivalent Series Resistance: 0402/R07S
1
10
100
1000
10000
0.5 1 10 20
Q
Capacitance (pF)
150-250MHz
900-1000MHz
1900-2000MHz 2100-2250MHz
Q Factor: 0402/R07S
0.01
0.1
1
1101001000
150-250MHz 900-1000MHz 1900-2000MHz 2100-2250MHz
ESR (Ohms)
Capacitance (pF)
Equivalent Series Resistance: 0805/R15S
1
10
100
1000
10000
1 10 100 1000
150-250MHz 900-1000MHz
1900-2000MHz 2100-2250MHz
ESR (Ohms)
Capacitance (pF)
Q Factor: 0805/R15S
Measurements performed on a Boonton 34A Resonant Coaxial Line and represent typical capacitor performance.
16
www.johansontechnology.com
S42E SERIES RF CHARACTERISTICS VERSUS FREQUENCY
S42E SERIES RF CHARACTERISTICS VERSUS CAPACITANCE
0.01
0.1
1
0 200 400 600 800 1000 1200 1400
ESR (Ohms)
1.5pF 3.9pF 9.1pF 15pF 27pF
82pF
&REQUENCY-(Z
Equivalent Series Resistance: 1111/S42E
S42E Equivalent Series Resistance vs Capacitance, Typical
S42E SRF (Series Mount), Typical
S42E Q vs. Capacitance, Typical
Q Factor: 1111/S42E
0.01
0.1
1
1 10 100 1000
Capaci t a nce ( pF)
ESR (Ohms )
140 - 250 M H z
350 - 750 M H z 600 - 1200 M Hz
1
10
100
1000
1 10 100 1000
Q
140 - 250 M H z
350 - 750 M H z 600 - 1200 MH z
10000
Capacitance ( pF)
)zH
G(
y
cneu
qer
F
JTI S42E SRF
10
1
0.1 110 100 1000
Capaci t a nce ( pF)
1
10
100
1000
10000
0 200 400 600 800 1000 1200 1400
Fre quency (MHz)
Q
1.5pF 3.9pF 9.1pF 15pF 27pF
82pF
17
www.johansontechnology.comwww.johansontechnology.com
JTI S48E GRAPHICAL DATA
As measured on a 8720C VNA, using a Shunt-
Through fi xture, and using the S11 magnitude dip
to determine the SRF
0.1
1
10
11 0 100 1000
SRF (Shunt Mount), S48E, Typical (Preliminary)
Capacitance (pF)
JTI S48E SRF
Frequency (GHz)
0.1
1
10
100
1 10 100 1000 10000
Current Rating vs. Capacitance, S48E, Typical (Preliminary)
Capacitance (pF)
Current Rating (amps)
30 MHz
64 MHz
128 MHz
As measured on a 4287A LCR meter, using a
16092A fi xture
As measured on a 4287A LCR meter, using a
16092A fi xture
Solid traces show voltage limited current (Vrms)
Dotted traces show power dissipation limited
current (Based on 4 Watts Power Dissipation, and
125 degrees C case temp.)
0.010
0.100
1 10 100 1000 10000
S48E ESR vs. Capacitance, Typical (Preliminary)
ESR (ohms)
ESR vs. C @ 64 MHz
ESR vs. C @ 128 MHz
Capacitance (pF)
100
1000
10000
100000
1000 1 10 100 10000
Q
10
S48E Q vs. Capacitance, Typical (Preliminary)
Capacitance (pF)
Q vs C @ 64 MHz
Q vs C @ 128 MHz
18
www.johansontechnology.comwww.johansontechnology.com
High frequency multi-layer chip inductors feature a monolithic body
made of low loss ceramic and high conductivity metal electrodes to
achieve optimal high frequency performance.
These RF chip inductors are compact in size and feature lead-free tin
plated nickel barrier terminations and tape and reel packaging which
makes them ideal for small size/high volume wireless applications.
Polarity Half-Marked Inductors (0201 only)
RF CERAMIC CHIP INDUCTORS
APPLICATIONS & FEATURES
• CELL/PCS Modules • Wireless LAN
• Broadband Components • RFID
• RF Tranceivers
• RoHS Compliant (Standard, “V” Code)
• Sn/Pb Terminations Optional (“T” Code)
HOW TO ORDER
Part number written: L-07C10NJV6T
DEVICE
Inductor
L-
SIZE
05 = 0201
07 = 0402
14 = 0603
07
TYPE
B = Polarity
Half-Marked
(all 0201)
C = 0402 and
0603 (see
“Marking”)
C
VALUE
See Table
10N
TOLERANCE
C = ± 0.2 nH ≤ 1.0 nH
S = ± 0.3 nH 1.0 to 5.6 nH
J = ± 5% 6.8 nH and above
K = ± 10% 3.3 nH and above
J
MARKING
4 = No Marking
(all 0603)
6 = Orientation
Mark
(all 0201 and 0402*)
6
TERMINATION
V =
Ni/Sn
T = Ni / SnPb
V
TAPE & REEL
Size Code Tape Reel Qty
0201 T Paper 7” 15,000
0402 T Paper 7” 10,000
0603 T Paper 7” 4,000
T
PRODUCT RANGE SUMMARY
EIA SIZE (mm) SIZE CODE L RANGE Q FACTOR (Min.) SRF (Typ.) TEMPERATURE
0201 (0603) L-05 0.6 - 39 nH 4 (100 MHz) >21 GHz (1.0 nH) -40°C to +100°C
0402 (1005) L-07 1.0 - 120 nH 8 (100 MHz) >21 GHz (1.0 nH) -40°C to +100°C
0603 (1608) L-14 1.0 - 220 nH 12 (100 MHz) >23 GHz (1.0 nH) -40°C to +100°C
MECHANICAL CHARACTERISTICS
0201 (0603)
Inches mm
.024 ±.001” (0.6 ±0.03)
.012 ±.001” (0.3 ±0.03)
.012 ±.001” (0.3 ±0.03)
.006 ±.002” (0.15 ±0.05)
0402 (1005)
Inches mm
.039 ±.004” (1.00 ±.10)
.020 ±.004” (0.50 ±.10)
.020 ±.004” (0.50 ±.10)
.009 ±.004” (0.23 ±.10)
0603 (1608)
Inches mm
.063 ±.006” (1.60 ±.15)
.031 ±.006” (0.80 ±.15)
.031 ±.006” (0.80 ±.15)
.012 ±.008” (0.30 ±.20)
Length
Width
Thickness
End Band
L
W
T
E/B
P
l
i
t
H
l
f
M
k
d
I
d
t
(
02
01
l
)
*Please note that all 0402 inductors (L-07C) have orientation full marking only.
Orientation Full Marking (all 0402)
19
www.johansontechnology.com
RF CHIP INDUCTOR SELECTION CHART
0201
(L-05)
0402
(L-07)
0603
(L-14)
Inductance Toler-
ance
nH Code
0.6 0N6
C
S
300 mA
0.7 0N7 300 mA
0.8 0N8 300 mA
0.9 0N9 300 mA
1.0 1N0 300 mA 300 mA 300 mA (S only)
1.2 1N2 300 mA 300 mA (S only) 300 mA (S only)
1.3 1N3 300 mA
1.5 1N5 300 mA 300 mA (S only) 300 mA (S only)
1.8 1N8
S
300 mA 300 mA 300 mA
1.9 1N9 300 mA 300 mA
2.0 2N0 300 mA 300 mA
2.2 2N2 300 mA 300 mA 300 mA
2.3 2N3 300 mA
2.4 2N4 300 mA 300 mA
2.5 2N5 300 mA
2.7 2N7 300 mA 300 mA 300 mA
3.0 3N0
K
S
300 mA 300 mA
3.3 3N3 300 mA 300 mA 300 mA
3.6 3N6 300 mA 300 mA
3.7 3N7 300 mA
3.9 3N9 300 mA 300 mA 300 mA
4.3 4N3 300 mA
4.7 4N7 300 mA 300 mA 300 mA
5.1 5N1 300 mA 300 mA
5.6 5N6 300 mA 300 mA 300 mA
6.2 6N2 300 mA
6.8 6N8
J
K
250 mA 250 mA 300 mA
7.5 7N5 250 mA
8.2 8N2 250 mA 250 mA 300 mA
10 10N 250 mA 250 mA 300 mA
12 12N 250 mA 250 mA 300 mA
13 13N 250 mA 250 mA
15 15N 250 mA 250 mA 300 mA
18 18N 200 mA 200 mA 300 mA
20 20N 200 mA 200 mA
22 22N 200 mA 200 mA 300 mA
23 23N 200 mA
27 27N 200 mA 200 mA 300 mA
33 33N 200 mA 200 mA 300 mA
39 39N 200 mA 150 mA 300 mA
43 43N 150 mA
47 47N 150 mA 300 mA
56 56N 150 mA 300 mA
68 68N 100 mA 300 mA
82 82N 100 mA 300 mA
100 R10 100 mA 300 mA
120 R12 100 mA 300 mA
150 R15 300 mA
180 R18 300 mA
220 R22 300 mA
270 R27
330 R33
390 R39
420 R42
560 R56
680 R68
EIA Size
Inductor
Value
Consult factory for Non-Standard values.
See web page for Chip Inductor Product Detail Summary by part number
20
www.johansontechnology.comwww.johansontechnology.com
1.0
10
100
500
0.01 0.1 1.0 10
47N
27N
15N
6N8
3N3
1N5
INDUCTANCE VS FREQUENCY: SIZE 0402
Frequency (GHz)
Inductance (nH)
0
20
40
60
80
100
0.01 0.1 1.0 10
1N5
3N3
6N8
15N
47N
27N
Q VS FREQUENCY: SIZE 0402
Frequency (GHz)
Q
RF CHARACTERISTICS CHARACTERISTICS (TYPICAL)
1
10
100
1000
0.01 0.1 1 10
Frequency (GHz)
Inductance (nH)
1N5
3N3
6N8
10N
22N
33N
INDUCTANCE VS FREQUENCY: SIZE 0201
1.0
10
100
1000
0.01 0.1 1.0 10
R10
56N
27N
12N
4N7
2N2
INDUCTANCE VS FREQUENCY: SIZE 0603
Frequency (GHz)
Inductance (nH)
0
20
40
60
80
100
0.01 0.1 1.0 10
2N2
4N7
12N
27N
R10
56N
Q VS FREQUENCY: SIZE 0603
Q
Frequency (GHz)
Q VS FREQUENCY: SIZE 0201
21
www.johansontechnology.comwww.johansontechnology.com
These high frequency High-Q chip inductors feature a
monolithic body made of low loss ceramic wound with wire to
achieve optimal high frequency performance.
These RF chip inductors are compact in size and are provided on
tape and reel packaging which makes them ideal for high volume RF
applications. They feature a nickel barrier with a top plating of gold
for the ceramic core types (all 0402, all 0603, and most 0805 types),
and with a top plating of 100% tin for the ferrite core types (0805
size, 470 nH and higher). Most inductance values between those
listed are available on request.
RF WIREWOUND CHIP INDUCTORS
APPLICATIONS
• CELL/PCS Modules • Wireless LAN
• Broadband Components • RFID
• RF Tranceivers • Cordless Phone
• Cable Modem • Computer Peripherals
• Bluetooth • ASDL
HOW TO ORDER
Example Part Number:
L-07W4N3SV4T is: 0402 Wirewound, 4.3 nanohenry, +/- 0.3 nH tolerance, Ni / Au termination, No Marking, Paper tape on a 7” reel.
* See selection chart on the following pages for available tolerances of each value.
DEVICE
Inductor
L-
SIZE
07 = 0402
14 = 0603
15 = 0805
07
TYPE
W = Wirewound on
Ceramic Core
F = Wirewound on
Ferrite Core
W
VALUE
See Table
4N3
TOLERANCE*
C = ± 0.2 nH
S = ± 0.3 nH
G = ± 2%
J = ± 5%
K = ± 10%
S
MARKING
4 = No Marking
4
TAPE & REEL
Size Code Tape Reel Qty
0402 T Paper 7” 10,000
0603 E Embossed 7” 3,000
0805 E Embossed 7” 2,000
T
TERMINATION
V =
Ni / Au for “W”types,
and V = Ni / 100% Sn for
“F” types
V
MECHANICAL CHARACTERISTICS
L
WT
S
0402 (1005)
Inches mm
.039 ±.004” (1.00 ±.10)
.022 ±.004” (0.55 ±.10)
.020 ±.004” (0.50 ±.10)
.008 ±.004” (0.20 ±.10)
Length
Width
Thickness
End Band
0805 (2012)
Inches mm
.079 ±.008” (2.00 ±.20)
.049 ±.008” (1.25 ±.20)
.047 ±.008” (1.20 ±.20)
.016 ±.004” (0.40 ±.10)
0603 (1608)
Inches mm
.063 ±.008” (1.60 ±.20)
.041 ±.008” (1.05 ±.20)
.041 ±.008” (1.05 ±.20)
.014 ±.004” (0.35 ±.10)
PRODUCT RANGE SUMMARY
EIA SIZE (mm) SIZE CODE L RANGE Q FACTOR (Typ.) SRF (Typ.) TEMPERATURE
0402 (1005) L-07 1.0 - 120 nH 55 (900 MHz) >11 GHz (1.0 nH) -40°C to + 125°C
0603 (1608) L-14 2.0 - 470 nH 60 (900 MHz) >13 GHz (2.0 nH) -40°C to + 125°C
0805 (2012) L-15 2.2 - 10,000 nH 60 (500 MHz) >11 GHz (2.2 nH) -40°C to + 125°C*
*-40 deg. C to +85 deg. C for ferrite core types
22
www.johansontechnology.com
RF WIREWOUND CHIP INDUCTOR SELECTION CHART
See web page for WireWound Inductor Product Detail
Summary by part number
0402
(L-07)
0603
(L-14)
0805
(L-15)
Core
Type
Inductance Toler-
ance
Rated
Current
Toler-
ance
Rated
Current
Toler-
ance
Rated
Current
nH Code
1.0 1N0 C, S 1360 mA
CERAMIC CORE
1.2 1N2 C, S 1300 mA
1.6 1N6 C, S 700 mA
1.8 1N8 C, S 1040 mA C, S 700 mA
1.9 1N9 C, S 1040 mA
2.0 2N0 C, S 1040 mA C, S 700 mA
2.2 2N2 C, S 960 mA C, S 800 mA
2.4 2N4 C, S 790 mA
2.6 2N6 C, S 640 mA
2.7 2N7 C, S 640 mA C, S 800 mA
3.3 3N3 C, J, K 840 mA C, S 700 mA C, S 800 mA
3.6 3N6 C, J, K 840 mA C, S 700 mA
3.9 3N9 C, J, K 840 mA C, S 700 mA C, S 600 mA
4.3 4N3 C, J, K 700 mA C, S 700 mA
4.7 4N7 C, J, K 640 mA C, S 700 mA C, S 600 mA
5.1 5N1 C, J, K 800 mA C, J, K 700 mA
5.6 5N6 C, J, K 760 mA C, J, K 700 mA C, J, K 600 mA
6.2 6N2 C, J, K 760 mA
6.8 6N8 C, J, K 680 mA C, J, K 700 mA C, J, K 600 mA
7.5 7N5 C, J, K 680 mA C, J, K 700 mA
8.2 8N2 C, J, K 680 mA C, J, K 700 mA C, G, J, K 600 mA
8.7 8N7 C, J, K 480 mA G, J, K 700 mA
9.0 9N0 C, J, K 680 mA
9.5 9N5 C, J, K 680 mA
10 10N G, J, K 480 mA G, J, K 700 mA G, J, K 600 mA
11 11N G, J, K 640 mA G, J, K 700 mA
12 12N G, J, K 640 mA G, J, K 700 mA G, J, K 600 mA
13 13N G, J, K 560 mA
15 15N G, J, K 560 mA G, J, K 700 mA G, J, K 600 mA
16 16N G, J, K 560 mA G, J, K 600 mA
18 18N G, J, K 420 mA G, J, K 700 mA G, J, K 600 mA
19 19N G, J, K 480 mA
20 20N G, J, K 420 mA G, J, K 600 mA
22 22N G, J, K 400 mA G, J, K 700 mA G, J, K 600 mA
23 23N G, J, K 400 mA
24 24N G, J, K 400 mA
27 27N G, J, K 400 mA G, J, K 600 mA G, J, K 600 mA
30 30N G, J, K 400 mA
33 33N G, J, K 400 mA G, J, K 600 mA G, J, K 500 mA
36 36N G, J, K 320 mA
39 39N G, J, K 320 mA G, J, K 600 mA G, J, K 500 mA
40 40N G, J, K 320 mA
43 43N G, J, K 100 mA
47 47N G, J, K 100 mA G, J, K 600 mA G, J, K 500 mA
51 51N J, K 100 mA G, J, K 600 mA
56 56N J, K 100 mA G, J, K 600 mA G, J, K 500 mA
68 68N J, K 100 mA G, J, K 600 mA G, J, K 500 mA
72 72N G, J, K 400 mA
82 82N J, K 100 mA G, J, K 400 mA G, J, K 500 mA
100 R10 J, K 100 mA G, J, K 400 mA G, J, K 500 mA
110 R11 J, K 100 mA
120 R12 J, K 100 mA G, J, K 300 mA G, J, K 500 mA
150 R15 G, J, K 280 mA G, J, K 400 mA
180 R18 G, J, K 240 mA G, J, K 400 mA
220 R22 G, J, K 200 mA G, J, K 400 mA
270 R27 G, J, K 170 mA G, J, K 350 mA
EIA Size
Inductor
Value
0402
(L-07)
0603
(L-14)
0805
(L-15)
Core
Type
Inductance Toler-
ance
Rated
Current
Toler-
ance
Rated
Current
Toler-
ance
Rated
Current
nH Code
330 R33 J, K 150 mA G, J, K 300 mA Ceramic
390 R39 J, K 100 mA G, J, K 210 mA
470 R47 J, K 500 mA
FERRITE CORE
560 R56 J, K 450 mA
680 R68 J, K 400 mA
820 R82 J, K 300 mA
1000 1R0 J, K 180 mA
1200 1R2 J, K 150 mA
1500 1R5 J, K 130 mA
1800 1R8 J, K 120 mA
2200 2R2 J, K 110 mA
2700 2R7 J, K 100 mA
3300 3R3 J, K 210 mA
3900 3R9 J, K 200 mA
4700 4R7 J, K 180 mA
5600 5R6 J, K 160 mA
6800 6R8 J, K 130 mA
8200 8R2 J, K 120 mA
10000 10R J, K 80 mA
Consult factory for Non-Standard values.
EIA Size
Inductor
Value
23
www.johansontechnology.comwww.johansontechnology.com
RF CHARACTERISTICS CHARACTERISTICS (TYPICAL)
Q vs Frequency for 0402 Size
0
20
40
60
80
100
120
140
160
180
100 1000 10000
Frequency (MHz)
Q
2.2 nH 3.3 nH
5.6 nH 8.2 nH
15 nH 36 nH
L vs Frequency for 0402 Size
0
10
20
30
40
50
60
100 1000 10000
Frequency (MHz)
Inductance (nH)
2.2 nH 3.3 nH
5.6 nH 8.2 nH
15 nH 36 nH
Q vs Frequency for 0603 Size
0
20
40
60
80
100
120
100 1000 10000
Frequency (MHz)
Q
2.0 nH 10 nH
22 nH 100 nH
180 nH
L vs Frequency for 0603 Size
0
50
100
150
200
250
300
350
400
100 1000 10000
Frequency (MHz)
Inductance (nH)
2.0nH
10 nH
22 nH
100 nH
180 nH
0
10
20
30
40
50
60
70
80
90
100 1000 10000
Q
Fre quency (MHz)
2.7nH 27.0nH
100nH 270nH
470nH 680nH
Q vs Frequency for 0805 Size
0
200
400
600
800
1000
1200
1400
100 1000 10000
Frequency (MHz)
Inductance ( nH)
2.7nH 27.0nH
100nH 270nH
470nH 680nH
L vs Frequency for 0805 Size
24
www.johansontechnology.comwww.johansontechnology.com
INTEGRATED PASSIVE COMPONENTS
BALUN
BALUN
DIPLEXER
BP FILTER BP FILTER BP FILTER
LP FILTERCOUPLER
A
NTENNA
DIVIDER
DEMOD.
MOD.PA
LNA
VCO
KEY FEATURES
• Custom Solutions
• LTCC Based Designs
• Low Insertion Loss
• Miniature Size / Low Profile
• Temperature Stable
• Surface Mount
• RoHS Compliant, Standard, Use No Suffix
SUPPORTED APPLICATION BANDS
• Wireless LAN, Bluetooth, Home RF • 2.4 GHz & 5.5 GHz ISM Band • GPS
• GSM/EDGE/GPRS/DCS/PCS/WCDMA • Zigbee • UNII
• WiMAX 802.16 d/e • MIMO • UWB
Johanson Technology has developed a line of small,
highly reliable RF ceramic components manufactured with
a proprietary LTCC (low temperature co-fired ceramic)
process. These components operate over several bands
from 900MHz to 6 GHz covering Cellular, DECT, WLAN,
Bluetooth, 802.11 (a,b and g) and GPS applications.
In addition to the array of listed components we can
support custom solutions for high volume applications with
design flexibility and short development times. Contact us
today with your specific technical requirements.
25
www.johansontechnology.com
CERAMIC CHIP ANTENNAS
Part
Number
Frequency
(MHz) Peak Gain Ave. Gain Return Loss
(min) Case Size
0433AT62A0020 423 - 443 -4 dBi typ. (XZ-total) -4 dBi typ. (XZ-total) 9.5 dB See Spec Sheet
0783AT43A0008 779 - 787 -2.0 dBi typ. (XZ-total) -5.0 dBi typ. (XZ-total) 9.5 dB 43-1
0868AT43A0020 858 - 878 -1.0 dBi typ (XZ-total) -4.0 dBi typ (XZ-total) 9.5 dB 43-1
0920AT50A080 880 - 960 -0.7 dBi typ (XZ-V) -2.6 dBi typ (XZ-V) 8.5 dB 50
0915AT43A0042 894 - 936 -1.0 dBi typ (XZ-total) -4.0 dBi typ (XZ-total) 8.5 dB 43-1
0915AT43A0026 902 - 928 -1.0 dBi typ (XZ-total) -4.0 dBi typ (XZ-total) 8.5 dB 43-1
0953AT43A0006 950 - 956 -1.0 dBi typ.(XZ-total) -1.0 dBi typ.(XZ-total) 9.5 dB 43-1
1575AM55B0001 1575.42 ± 5 MHz 1.3 dBi typ (YZ-total) -0.7 dBi typ (YZ-total) 9.5 dB See Spec Sheet
1575AT43A0040 1555 - 1595 - 1.5 dBi typ (XZ-V) -2.5 dBi typ (XZ-V) 9.5 dB 43-1
1575AT47A0040_ 1555 - 1595 -1.0 dBi typ (XZ-V) -3.0 dBi typ (XZ-V) 9.5 dB 47-1
1575AT54A0010 1570 - 1580 1.3 dBi typ (YZ-Total) -0.7 dBi typ (YZ-Total) 9.5 dB See Spec Sheet
1600AT45A0040 1580 - 1620 0.0 dBi typ (XZ-Total) -1.0 dBi typ (XZ-Total) 9.5 dB 45-1
2000AT18A0075 1965 - 2040 0.3 dBi typ (XZ-V) -3 dBi typ (XZ-V) 9.5 dB 18-4
2450AT18A100 2400 - 2500 0.5 dBi typ (XZ-V) -0.5 dBi typ (XZ-V) 9.5 dB 18-4
2450AT18A0150 2375 - 2525 0.5 dBi typ (XZ-V) -0.5 dBi typ (XZ-V) 9.5 dB 18-4
2450AT18B100 2400 - 2500 0.5 dBi typ (XZ-V) -0.5 dBi typ (XZ-V) 9.5 dB 18-4
2450AT18D0100 2400 - 2500 1.5 dBi typ.(XZ-V) -1.0 dBi typ.(XZ-V) 6.0 dB 18-5
2450AT42A100 2400 - 2500 0 dBi typ (XZ-V) -1 dBi typ (XZ-V) 9.5 dB 42-1
2450AT42B100 2400 - 2500 0 dBi typ (XZ-V) -1.5 dBi typ (XZ-V) 9.5 dB 42-1
2450AT42D0100 2400 - 2500 0.5 dBi typ (XZ-total) -2.0 dBi typ (XZ-V) 6.0 dB 42-1
2450AT43A100 2400 - 2500 2.0 dBi typ (XZ-V) 0.5 dBi typ (XZ-V) 9.5 dB 43-1
2450AT43B100 2400 - 2500 1.3 dBi typ (XZ-V) -0.5 dBi typ (XZ-V) 9.5 dB 43-2
2450AT43D100 2400 - 2500 -0.5 dBi typ -3.6 dBi typ 9.5 dB See Spec Sheet
2450AT43F0100 2400 - 2500 2.1 dBi typ (XZ-total) 1.0 dBi typ (XZ-total) --- See Spec Sheet
2450AT43H0100 2400 - 2500 2.1 dBi typ. (XZ-V) 1.0 dBi typ. (XZ-V) 9.5 dB See Spec Sheet
2450AT45A100_ 2400 - 2500 3.0 dBi typ (XZ-V) 1.0 dBi typ (XZ-V) 9.5 dB 45-1
2450AD46A5388 LB: 2400 - 2500
HB: 4900 - 5875 1.0 dBi typ (XZ-V)
-1.5 dBi typ (YZ-V) -2.5 dBi typ (XZ-V)
-2.5 dBi typ (YZ-V) 8.5 dB
8.5 dB See Spec Sheet
2450AD46A5400
(Dual Band) LB: 2400 - 2500
HB: 4900 - 5900 1.0 dBi typ (XZ-V)
-1.5 dBi typ (XZ-V) -2.5 dBi typ (YZ-V)
-2.5 dBi typ (YZ-V) 8.5 dB
8.5 dB 46-1
2500AT43A0100 2450 - 2550 0.6 dBi typ (YZ-total) -2.1 dBi typ (XZ-total) 3.0 dB 43-1
2500AT44M0400 2300 - 2700 2.5 dBi typ 0.5 dBi typ 9.5 dB 44-2
2500AT52M3555
WiMax (Tri-Band)
2300 - 2690
3300 - 3900
5150 - 5875
2.0 dBi typ
2.0 dBi typ
2.0 dBi typ
-2.0 dBi typ
-4.0 dBi typ
-3.0 dBi typ
8.5 dB
9.5 dB
9.5 dB See Spec Sheet
2600AT44A0600 2300 - 2900 2.0 dBi 0.0 dBi typ. 9.5 dB 42-2
2650AT43A0100 2600 - 2700 0.5 dBi typ (YZ-total) -1.7 dBi typ (XZ-total) 3.0 dB 50
3100AT51A7200 3100 - 10300 1.5 dBi typ -3.5 dBi typ 9.5 dB 51-1
4000AT44A1800 3100 - 4900 2.7 dBi typ -3.5 dBi typ 7.4 dB See Spec Sheet
5250AT43A200_ 5150 - 5350 3.6 dBi typ (XZ-V) -2.3 dBi typ (XZ-V) 9.5 dB 43-1
5400AT18A1000 4900 - 5900 2.0 dBi typ (XZ-V) -2.5 dBi typ (XZ-V) 8.5 dB 18-4
5500AT18A0725 5150 - 5875 2.0 dBi typ. (XZ-V) -2.5 dBi typ. (XZ-V) 9.5 dB 18-4
5775AT43A100_ 5725 - 5825 3.9 dBi typ (XZ-V) -1.5 dBi typ (XZ-V) 9.5 dB 43-1
Basic case size drawings for above part numbers are located on pages 39-40.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
26
www.johansontechnology.com
ANTENNA MODULES
Part
Number
Center Freq.
(MHz)
Peak Gain Ave. Gain Return Loss
(min)
Case Size
1575AM55B0001 1575.42 ± 5 MHz 1.3 dBi typ. (YZ-total) -0.7 dBi typ. (YZ-total) 9.5 dB See Spec Sheet
Basic case size drawings for above part numbers are located on pages 39-40.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
BAND-PASS FILTERS: 2.45 GHZ
Part
Number
Frequency
(MHz)
Insertion
Loss (max.)
Attenuation
(min)
Return
Loss (min)
Ripple
(typical)
Case Size
2450BP07A0100 2400 - 2500 2.5 dB
25 dB @ 824 - 960 MHz
25 dB @ 1710 - 1910 MHz
25 dB @ 4800 - 5000 MHz
15 dB @ 7200 - 7500 MHz
9.5 dB - 07-1
2450BP14D0100 2400 - 2500 1.7 dB
30 dB @ 880 - 915 MHz
30 dB @ 1710 - 1785 MHz
25 dB @ 1850 - 1910 MHz
25 dB @ 4800 - 5000 MHz
15 dB @ 7200 - 7500 MHz
9.5 dB - 14-1
2450BP14E0100 2400 - 2500 2.5 dB
35 dB @ 824 - 960 MHz
38 dB @ 1710 - 1910 MHz
25 dB @ 4800 - 5000 MHz
20 dB @ 7200 - 7500 MHz
9.5 dB - 14-1
2450BP15B100 2400 - 2500 2.2 dB
25 @ 1200 - 1300 MHz
10 @ 2000 MHz
12 @ 3000 MHz
30 @ 3600 - 3800 MHz
34 @ 4800 - 5000 MHz
9.5 dB - 15-3A
2450BP15C100 2400 - 2500 2.2 dB
30 dB @ 1200 - 1300 MHz
15 dB @ 2000 MHz
25 dB @ 3000 MHz
20 dB @ 3600 - 3800 MHz
20 dB @ 4800 - 5000 MHz
9.5 dB - 15-3B
2450BP15D100 2400 - 2500 2.6 dB
30 dB @ 880 - 1990 MHz
20 dB @ 2110 - 2170 MHz
30 dB @ 4800 - 5000 MHz
20 dB @ 7200 - 7500 MHz
9.5 dB - 15-1F
2450BP15E0100 2400 - 2500 1.5 dB
30 dB @ 880 - 915 MHz
30 dB @ 1710 - 1785 MHz
25 dB @ 1850 - 1910 MHz
25 dB @ 4800 - 5000 MHz
15 dB @ 7200 - 7500 MHz
9.5 dB - 15-3C
2450BP15F0100 2400 - 2500 2.5 dB
35 dB @ 824 - 960 MHz
38 dB @ 1710 - 1910 MHz
25 dB @ 4800 - 5000 MHz
20 dB @ 7200 - 7500 MHz
9.5 dB - 15-1G
2450BP15G0100 2400 - 2500 2.0 dB
30 dB @ 824 - 960 MHz
28 dB @ 1710 - 1910 MHz
20 dB @ 1910 - 1990 MHz
30 dB @ 4800 - 5000 MHz
20 dB @ 7200 - 7500 MHz
9.5 dB - 15-1G
2450BP15H0100 2400 - 2500 1.5 max.@ 25°C
1.8 max.
@ -40 - 85°C
25 dB @ 1200 - 1300 MHz
10 dB @ 2000 MHz
12 dB @ 3000 MHz
30 dB @ 3600 - 3800 MH
34 dB @ 4800 - 5000 MHz
9.5 dB - 15-3C
27
www.johansontechnology.com
Basic case size drawings for above part numbers are located on pages 39-40.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
BAND-PASS FILTERS: 2.45 GHZ
Part
Number
Frequency
(MHz)
Insertion
Loss (max.)
Attenuation
(min)
Return
Loss (min)
Ripple
(typical)
Case
Size
2450BP15J0100 2400 - 2500
2.0 max.@ 25°C
2.5 max.@
-40 - 85°C
25 dB @ 746 - 764 MHz
30 dB @ 824 - 849 MHz
26 dB @ 869 - 960 MHz
28 dB @ 1570 - 1580 MHz
23 dB @ 1710 - 1785 MHz
30 dB @ 1850 ~ 1910MHz
30 dB @ 1930 - 1990 MHz
30 dB @ 2110 - 2170 MHz
15 dB @ 3300 - 3800 MHz
20 dB @ 4800 - 5000MHz
20 dB @ 7200 - 7500 MHz
9.5 dB 15-3C
2450BP15N0100 2400 - 2500 2.2 dB
25dB @ 1200 - 1300MHz
10dB @ 2000MHz
12dB @ 3000MHz
26dB @ 3400 - 3600MHz
30dB @ 3600 - 3800 MHz
34dB @ 4800 - 5000MHz
9.5 dB - See Spec
Sheet
2450BP15P0100 2400 - 2500 1.3 dB 26dB @ 3400 - 3600 MHz
20dB @ 4800 - 5000 MHz 9.5 dB - See Spec
Sheet
2450BP18C100C 2400 - 2500 2.5 dB
40 dB @ 900-928 MHz
30 dB @ 1200 - 1800 MHz
25 dB @ 2100 MHz
35 dB @ 4800 - 5000 MHz
40 dB @ 7200 - 7500 MHz
9.5 dB 0.7 dB 18-3A
2450BP18C100E 2400 - 2500 2.5 dB
40 dB @ 1200 - 1800 MHz
25 dB @ 2100 MHz
35 dB @ 4800 - 5000 MHz
25 dB @ 7200 - 7500 MHz
9.5 dB 0.7 dB 18-1
2450BP39C100A 2400 - 2500 2.5 dB 42 dB @ 1710 - 1990 MHz
30 dB @ 2100 MHz
30 dB @ 4800 - 5000 MHz 9.5 dB 0.7 dB 39-1B
2450BP39C100B 2400 - 2500 1.8 dB 30 dB @ 1710 - 1780 MHz
25 dB @ 1850 - 1910 MHz
25 dB @ 4800 - 5000 MHz 9.5 dB 0.7 dB 39-1B
2450BP39C100C 2400 - 2500 1.5 dB
30 dB @ 800 - 915 MHz
30 dB @ 1710 - 1785 MHz
25 dB @ 1850 - 1910 MHz
25 dB @ 4800 - 5000 MHz
15 dB @ 7200 - 7500 MHz
9.5 dB - 39-1B
2450BP39C100D 2450 ± 50 2.2 dB
30 dB @ 880 - 915MHz
30 dB @ 1710 - 1785MHz
25 dB @ 1850 - 1910MHz
25 dB @ 2100MHz
25 dB @ 4800 - 5000MHz
15 dB @ 7200 - 7500MHz
9.5 dB - 39-1D
2450BP39D100B 2400 - 2500 2.5 dB
35 dB @ 880 - 915 MHz
18 dB @ 1710 - 1990 MHz
12 dB @ 2100 MHz
35 dB @ 3200 MHz
22 dB @ 4800 - 5000 MHz
22 dB @ 7200 - 7500 MHz
9.5 dB - 39-1B
2450BP39D100C 2400 - 2500 1.2 dB
30 dB @ 880 - 915 MHz
30 dB @ 1710 - 1785 MHz
25 dB @ 1850 - 1910 MHz
25 dB @ 4800 - 5000 MHz
15 dB @ 7200 - 7500 MHz
9.5 dB - 39-1B
28
www.johansontechnology.com
BAND-PASS FILTERS: 5.5 GHZ
Part
Number
Frequency
(MHz)
Insertion
Loss (max.)
Attenuation
(min)
Return
Loss (min)
Ripple
(typical)
Case Size
5400BP39A0100 4900 - 5900 3.5 dB 24 dB @ 3800 - 4500 MHz
20 dB @ 6300 - 7100 MHz 8.5 dB - See Spec Sheet
5487BP15B675 5150 - 5825 1.8 dB 35 dB @ 2570 - 2900 MHz
22 dB @ 10300 - 11600 MHz
30 dB @ 15450 - 17470 MHz 9.5 dB 0.7 dB 15-1B
5487BP15C675 5150 - 5825 1.8 dB 35 dB @ 2570 - 2900 MHz
27 dB @ 10300 - 11650 MHz
20 dB @ 15450 - 17475 MHz 9.5 dB 0.7 dB 15-1B
5515BP15B725 5150 - 5875 1.5 dB 30 dB @ 3500 MHz 9.5 dB - 15-3B
5515BP15B730 5150 - 5875 2.8 dB 30 dB @ 0.5-4.0 GHz
25 dB @ 10.3-11.8 GHz
20 dB @ 4.6 GHz 9.5 dB 0.7 dB 15-1B
5515BP15B975 4900 - 5875 1.5 dB 30 dB @ 3500 MHz 9.5 dB - 15-3B
5515BP15C725 5150 - 5875 2.0 dB 30 dB @ 500 - 4000 MHz
20 dB @ 4600 MHz
15 dB @ 10300 - 11800 MHz 9.5 dB - 15-3
5515BP15C975 4900 - 5875 1.8 dB 30 dB @ 500 - 4000MHz
20 dB @ 4200MHz
15 dB @ 9800 - 11750MHz 8.5 dB - 15-3B
5515BP15C1020 4900 - 5920 1.5 dB 30 dB @ 3500 MHz 9.5 dB - 15-3B
BAND-PASS FILTERS: 2.45 GHZ
Part
Number
Frequency
(MHz)
Insertion
Loss (max.)
Attenuation
(min)
Return
Loss (min)
Ripple
(typical)
Case
Size
2450BP39D100E 2400 - 2500 1.2 dB
30 @ 880 - 915 MHz
30 @ 1710 - 1785 MHz
25 @ 1850 - 1910 MHz
2 @ 2700 MHz
25 @ 4800 - 5000 MHz
15 @ 7200 - 7500 MHz
9.5 dB - 39-1
2450BP39F100A 2400 - 2500 2.4 dB
45 dB @ 880 - 915 MHz
48 dB @ 1710 - 1990 MHz
20 dB @ 2110 - 2170 MHz
30 dB @ 4800 - 5000 MHz
36 dB @ 7200 - 7500 MHz
9.5 dB - 39-1B
2450BP41D100A 2400 - 2500 2.3 dB
40 dB @ 1200 - 1800 GHz
30 dB @ 2100 GHz
12 dB @ 2200 GHz
35 dB @ 4800 - 5000 GHz
9.5 dB - See Spec
Sheet
2450BP41D100B 2400 - 2500 1.3 dB
30 dB @ 880 - 915 MHz
30 dB @ 1710 - 1785 MHz
20 dB @ 1850 - 1910 MHz
25 dB @ 4800 - 5000 MHz
20 dB @ 7200 - 7500 MHz
9.5 dB 0.7 See Spec
Sheet
2450LP15B050 2400 - 2500 0.5 dB 32 dB @ 2 x fo
30 dB @ 3 x fo
30 dB @ 4 x fo 10.9 dB - See Spec
Sheet
2500BP15M400 2300 - 2700 2.0 dB 15 dB @ 100 - 1800 MHz
20 dB @ 3400 - 11700 MHz 9.5 dB - 39-1
Basic case size drawings for above part numbers are located on pages 39-40.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
29
www.johansontechnology.com
Basic case size drawings for above part numbers are located on pages 39-40.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
BAND-PASS FILTERS: OTHER
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
Attenuation
(min)
Return Loss
(min)
Ripple
(typical)
Case
Size
1200BP44A575 950 - 1525 2.8 dB 25 dB @ 100 - 480 MHz
25 dB @ 1900 - 3050 MHz 7.0 dB - 44-1
1810BP07B200 1700 - 1900 1.8 dB 20 dB @ 855-955 (Prelim.)
10 dB @ 2565-2865 (Prelim.) TBD - 07-1
1906BP18A027 1893 - 1920 1.5 dB
38 dB @ 1405 - 1440 MHz
10 dB @ 1649 - 1680 MHz
24 dB @ 3786 - 3840 MHz
20 dB @ 5679 - 5760 MHz
9.5 dB - 18-1
1906BP18C027 1893 - 1920 3.0 dB 40 dB @ 1427 - 1454 MHz
35 dB @ 1660 - 1687 MHz
15 dB @ 2126 - 2153 MHz 9.5 dB - See Spec
Sheet
1906BP39B027 1893 - 1920 2.8 dB 40 dB @ 1660 MHz
12 dB @ 2139 MHz 9.5 dB - See Spec
Sheet
2593BP44B186 2500 - 2686 2.0 dB 40 dB @ 1870 - 2056 MHz 9.5 dB - 44-1
2598BP39A0205 2495 - 2700 3.0 dB 12 dB @ 2039 - 2244 MHz
24 dB @ 2951 - 3156 MHz
12 dB @ 4990 - 5400 MHz 9.5 dB - See Spec
Sheet
2600BP14M0200 2500 - 2700
2.2 dB max @
25°C
2.5 dB max @
-40 - 85°C
30 dB @ 806 - 915MHz
30 dB @ 1710 - 1785MHz
30 dB @ 1850 - 1910MHz
30 dB @ 1920 - 1980MHz
13 dB @ 3300 - 3900MHz
20 dB @ 4900 - 5900MHz
9.5 dB - See Spec
Sheet
3480BP39A0140 3410 - 3550 4.0 dB 30 dB @ < 2540 MHz
14 dB @ 4020 MHz
34 dB @ 5150 - 5350 MHz 10 dB - See Spec
Sheet
3600BP14M0600 3300 - 3700
1.8 dB max @
25°C
2.0 dB max @
-40 - 85°C
30 dB @ 806 - 915MHz
30 dB @ 1710 - 1785MHz
30 dB @ 1850 - 1910MHz
30 dB @ 1920 - 1980MHz
31 dB @ 2400 - 2500MHz
18 dB @ 4900 - 5900MHz
12 dB - See Spec
Sheet
3600BP15M600 3300 - 3900 1.8 dB 15 dB @ 100 - 2600 MHz
9 dB @ 4400 MHz
20 dB @ 6000 - 9900 MHz 9.5 dB - 15-3B
3960BP39A1584 3168 - 4752 2.5 dB 30 dB @ 2400 - 2500 MHz
12 dB @ 5150 MHz
25 dB @ 5950 MHz 9.5 dB - See Spec
Sheet
4000BP15U1800 3100 - 4900 2.0 dB 25 dB @ 1.75 GHz
13 dB @ 2.10 GHz 8.5 dB - 15-2B
4000NF39A6550 3200 - 4800 3.0 dB 14 dB @ 5150 - 5350 MHz 7.0 dB - See Spec
Sheet
4020BP39A0160 3940 - 4100 4.0 dB
34 dB @ < 2540 MHz
14 dB @ 3480 MHz
14 dB @ 4560 MHz
34 dB @ 5150 - 5350 MHz
20.8 dB - See Spec
Sheet
4560BP39A0180 4470 - 4650 2.97 dB
48.3 dB @ < 2540 MHz
19.1 dB @ 4020 MHz
19 dB @ 5150 - 5350 MHz
35.9 dB @ 5725 - 7000 MHz
17.5 dB - See Spec
Sheet
30
www.johansontechnology.com
HIGH-PASS FILTERS
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
Attenuation
(min)
Return Loss
(min)
Case Size
1900HP41B500 1650 - 2150 2.0 dB (Prelim) 27 dB @ 950 - 1450 MHz (Prelim) 8.5 dB 41-1
1900HP41C0500 1650 - 2150 2.0 dB 27 dB @ 950 - 1450 MHz 8.5 dB 41-1
2450HP14A100 2400 - 2500 1.0 dB 9 dB @ 824 - 960 MHz
20 dB @ 1917 MHz 9.5 dB 14-1B
2450HP15A100 2400 - 2500 0.85 dB 25 dB @ 875 - 920 MHz
20 dB @ 1705 - 1790 MHz
19 dB @ 1845 - 1915 MHz 9.5 dB See Spec
Sheet
3550HP15A0500 3300 - 3800
0.6 dB max. @
25°C
0.8 dB max. @ -40-
85°C
40 dB @ 1710-1910 MHz 9.5 dB See Spec
Sheet
5200HP15A4200 3100 - 7300 2.5 dB 30 dB @ < 2540 MHz
12 dB @ 2800 MHz 9.5 dB See Spec
Sheet
NOTCH FILTER
Part
Number
Frequency Range
(max)
Insertion
Loss (max)
Attenuation
(min)
Return Loss
(min)
Case Size
4000NF39A6550 3.0 dB @ 3200-4800 MHz 3.0 @ 5900-7200 MHz 30 dB @ 950 - 1450 MHz 8.5 dB 41-1
EMI FILTER
Part
Number
No. of
Sections
Cutoff
Freq (MHz)
Attenuation
(min)
Case Size
0400FA15A0400 4 400 20 dB @ 800 - 1000 MHz See Spec Sheet
Basic case size drawings for above part numbers are located on pages 39-40.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
31
www.johansontechnology.com
Basic case size drawings for above part numbers are located on pages 39-40.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
LOW-PASS FILTERS
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
Attenuation
(min)
Return Loss
(min)
Case Size
0500LP15A500 0 - 500 0.7 dB 9 dB @ 824 - 960 MHz
25 dB @ 1710 - 1990 MHz
25 dB @ 2400 - 4000 MHz 9.5 dB See Spec Sheet
0868LP15A020 858 - 878 0.5 dB 30 dB @ 2 x Fo
40 dB @ 3 x Fo 14.0 dB 15-1
0869LD14C1810 824 - 915
1710 - 1910 0.6 dB
0.6 dB 25 dB @ 2 x Fo - 18 dB @ 3 x Fo
22 dB @ 2 x Fo - 20 dB @ 3 x Fo 9.5 dB 14-1
0869LD14D1810 824 - 915
1710 - 1910 0.6 dB
0.6 dB
25 dB @ 1648-1830 - 25 dB
@ 3420-3820
25 dB @ 2472 - 2745 - 25 dB
@ 5130-5730
14 dB 14-1
0869LP14A090 824 - 915 0.6 dB 20 dB @ 2xFo
15 dB @ 3xFo 10.9 dB 14-1A
0892LP07A136 824 - 960 0.7 dB 18 dB @ 1648 - 1920 MHz
25 dB @ 2472 - 2880 MHz
25 dB @ 3296 - 3840 MHz 9.5 dB See Spec Sheet
0898LP18A035 880 - 915 0.6 dB 30 dB @ 2xFo
18 dB @ 3xFo 10.9 dB 18-2
0915LP15A026 902 - 928 0.65 dB 25 dB @ 2xFo
25 dB @ 3xFo 9.5 dB 15-2
0915LP15B026 902 - 928 0.5 dB 30 dB @ 2xFo
30 dB @ 3xFo 14.0 dB 15-2A
1175LP15A0550 900 - 1450 2.5 dB 25 dB @ 1650 - 2200 MHz 9.5 dB 15-2
1200LP41B0500 950 - 1450 2.0 dB 24 dB @ 1650-2150 (+25°C) 8.5 dB See Spec Sheet
1200LP41C0500 950 - 1450 2.0 dB 24 dB @ 1650-2150 (+25°C) 8.5 dB See Spec Sheet
1748LP18A075 1710 - 1785 0.6 dB 30 dB @ 3500 MHz
20 dB @ 5240 MHz 10.9 dB 18-2
1810LP07A200 1710 - 1910 0.5 dB 20 dB @ 2xFo
20 dB @ 3xFo 10.9 dB 07-1
1810LP07B200 1710 - 1910 0.6 dB 26 dB @ 3420 - 3570 MHz
21 dB @ 3700 - 3820 MHz
21 dB @ 5130 - 5730 MHz 9.5 dB 07-1
1810LP14A200 1710 - 1910 0.6 dB 30 dB @ 3420 - 3570 MHz
25 dB @ 3700 - 3820 MHz
20 dB @ 5130 - 5730 MHz
11.7 dB 14-1A
1880LP14A060 1850 - 1910 0.6 dB 27 dB @ 2xFo
19 dB @ 3xFo 11.7 dB 14-1A
2400LP18A0200 2300 - 2500 0.6 dB 27 dB @ 2 x Fo
18 dB @ 3 x Fo 10.9 dB See Spec Sheet
2450LP07A0100 2400 - 2500
0.45 dB max
@ 25°C
0.55 dB max
@ -40-85°C
21 dB @ 4800 - 5000 MHz
21 dB @ 7200 - 7500 MHz 11.7 dB 07-1
2450LP14A100 2400 - 2500 0.5 dB 25 dB @ 2xFo
18 dB @ 3xFo 14.0 dB 14-1A
2450LP14B100 2400 - 2500 0.5 dB 35 dB @ 2xFo
25 dB @ 3xFo 14.0 dB 14-1A
32
www.johansontechnology.com
Basic case size drawings for above part numbers are located on pages 39-40.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
DIRECTIONAL COUPLERS
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
Return Loss
(min)
Coupling
(dB)
Isolation
(min.)
Case Size
0450CP14A0040 430 - 470 0.2 dB 20.8 dB 27.5 ± 2.0 dB 45.0 dB 14-1
0848CP14A075 810 - 885 0.25 dB 15.6 dB 20.3 ± 1.0 dB 28.0 dB 14-1
0869CP14A090 824 - 915 0.3 dB 15.6 dB 17 ± 1.0 dB 26.0 dB 14-1
0898CP14A035 880 - 915 0.28 dB 15.6 dB 18 ± 1.0 dB 26.0 dB 14-1
0898CP14B035 880 - 915 0.25 dB 15.6 dB 20 ± 1.0 dB 28.0 dB 14-1
0898CP15A035 880 - 915 0.50 dB 14.0 dB 20 ± 1.0 dB 25.0 dB 15-1
0967CP14A024 955 - 979 0.50 dB 15.6 dB 12.5 ± 1.0 dB 19.0 dB 14-1
1575CH15A0030 1560 - 1590 3.3 ± 0.5 dB max. 10.0 dB 16.0 dB 15-1
1747CP14A075 1710 - 1785 0.44 dB 15.6 dB 14.5 ± 1.0 dB 25.0 dB 14-1
1748CP15A075 1710 - 1785 0.50 dB 14.0 dB 20 ± 1.0 dB 25.0 dB 15-1
1810CP14A200 1710 - 1910 0.30 dB 15.6 dB 20 ± 1.0 dB 25.0 dB 14-1
2450CP14A100 2400 - 2500 0.74 dB TBD dB 10 ± 1.0 dB 22.0 dB 14-1
2450CP14B100 2400 - 2500 0.34 dB TBD dB 17.65 ± 1.0 dB 25.0 dB 14-1
2600CF15A0200 2500 - 2700 1.0 dB 16.0 dB 20 ± 1.0 dB 29.0 dB 15-1
LOW-PASS FILTERS
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
Attenuation
(min)
Return Loss
(min)
Case Size
2450LP15A050 2400 - 2500 0.5 dB 27 dB @ 2xFo
25 dB @ 3xFo 10.9 dB 15-2
2450LP15B050 2400 - 2500 0.5 dB 32 dB @ 2 x Fo
30 dB @ 3 x Fo
30 dB @ 4 x Fo 10.9 dB 15-2
2500LP14A0400 2300 - 2700 0.55 dB 35 dB @ 2 x Fo
25 dB @ 3 x Fo 11.7 dB 14-1
2500LP14B0400 2300 - 2700 0.62 dB 27 dB @ 2 x Fo
25 dB @ 3 x Fo 14.0 dB 14-1
3550LP14A300 3400 - 3700 0.65 dB 25 dB @ 3xFo 14.0 dB 14-1
5515LP15A730 5150 - 5875 0.5 dB 25 dB @ 2xFo
18 dB @ 3xFo 10.9 dB 15-2
DUAL LOW PASS FILTER
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
Attenuation (min)
2xFo 3xFo
Return Loss
(min)
Case Size
0869LD14C1810 824 - 915
1710 - 1910 0.6 dB
0.6 dB 25 dB 18 dB
22 dB 20 dB 9.5 dB 14-1
33
www.johansontechnology.com
DIRECTIONAL COUPLER - DUAL BAND, SINGLE PATH
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
Return Loss
(min)
Coupling
(dB)
Isolation
(min.)
Case Size
0869CP14B1050 B1) 824 - 915
B2) 999 - 1102 0.4 dB
0.6 dB 15.5 dB
15.5 dB 14.2 ± 1.0
12.7 ± 1.0 23.0 dB
22.0 dB 14-1
0869CD14B1810 B1) 824 - 915
B2) 1710 - 1910 0.4 dB
0.4 dB 14.0 dB
14.0 dB 19.5 ± 1.0
19.5 ± 1.0 30.0 dB
30.0 dB 14-1
Basic case size drawings for above part numbers are located on pages 39-40.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
DIRECTIONAL COUPLER - DUAL BAND, DUAL PATH
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
Return Loss
(min)
Coupling
(dB)
Isolation
(min.)
Case
Size
0869CD14A1810 B1) 824 - 915
B2) 1710 - 1910
0.40 dB
0.40 dB -19.5 ± 1.0
19.5 ± 1.0
B1 In > Term: 30.0 dB
B2 In > Term: 30.0 dB 14-1
0898CD15B1748 B1) 880 - 915
B2)1710 - 1785
0.40 dB
0.40 dB
10.9 dB
10.9 dB
19.2 ± 1.0
19.2 ± 1.0
B1 In > B2 Out: 35.0 dB
B1 In > B2 In: 25.0 dB
B1 Out > B2 In: 25.0 dB
B1 In > Term: 23.0 dB
B2 In > Term: 23.0 dB
15-2
0898CD15C1748 B1) 880-915
B2) 1710-1785
0.35 dB
0.45 dB
10.9 dB
10.9 dB
19.2 ± 1.0
14.0 ± 1.5
B1 In > B2 Out: 35.0 dB
B1 In > B2 In: 24.0 dB
B1 Out > B2 In: 24.0 dB
B1 In > Term: 24.0 dB
B2 In > Term: 24.0 dB
15-2
0898CD15D1748 B1) 1710-1785
B2) 880-915
0.50 dB
0.35 dB
14.0 dB
14.0 dB
14.0 ± 1.5
19.2 ± 1.0
B1 In > B2 Out: 25.5 dB
B1 In > B2 In: 21.0 dB
B1 Out > B2 In: 22.0 dB
B1 In > Term: 17.0 dB
B2 In > Term: 24.0 dB
15-2
DIRECTIONAL COUPLER WITH LOW PASS FILTER
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
Return
Loss (min)
Coupling
(dB)
Isolation
(min.)
Attenuation (min.)
2 x Fo 3 x Fo
Case
Size
0898CF15A035_ 880 - 915 0.7 dB 14 dB 20 ± 1.0 25.0 dB 22.0 dB 17.0 dB 15-1
0910CF15B0100 860 - 960 1.2 dB 20 dB 10 ± 1.0 30.0 dB
27 dB @ 2 x Fo
30 dB @ 3 x Fo
30 dB @ 4 x Fo
30 dB @ 5 x Fo
See Spec
Sheet
1748CF15A075_ 1710 - 1785 0.5 dB 14 dB 20 ± 1.0 25.0 dB 22.0 dB 15-1
2450CF15A0100 2400 - 2500 0.8 dB 20 dB 15 ± 1.0 22.0 dB 20.0 dB 15-1
5300CF15A0950 4900 - 5850 0.8 dB 20 dB 15 ± 1.0 22.0 dB 20.0 dB 15-1
34
www.johansontechnology.com
Basic case size drawings for above part numbers are located on pages 39-40.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
CERAMIC CHIP BALUNS
Part
Number
Frequency
(MHz)
Impedance
Unbal./Bal.
Insertion
Loss (max)
Return Loss
(min)
Phase
Difference
Amplitude
Difference (max)
Case
Size
0430BL15A0100 400 - 460 50/100 1.0 dB 9.5 dB 180°±10° 2.0 dB 15-1
0465BL15B100 460 - 470 50/100 1.0 dB 9.5 dB 180°±10° 1.5 dB 15-1A
0896BL14B050 851 - 941 50/50 1.5 dB 9.5 dB 180°±10° 0.7 dB 14-1A
0866BL15C200 800 - 900 50/200 1.2 dB 9.5 dB 180°±10° 1.0 dB 15-1E
0900BL15C050 800 - 1000 50/50 1.2 dB 9.5 dB 180°±10° 2.0 dB 15-1D
0900BL18B100 800 - 1000 50/100 1.0 dB 9.5 dB 180°±10° 2.0 dB 18-1
0900BL18B200 800 - 1000 50/200 1.0 dB 9.5 dB 180°±10° 2.0 dB 18-1
0900BL15A100 900 - 1000 50/100 1.2 dB 9.5 dB 180°±10° 2.0 dB 15-1
0917BL18B100 889 - 945 50/100 1.0 dB 9.5 dB 180°±10° 2.0 dB 18-1
1450BL15A200 1400 - 1500 50/200 1.0 dB 9.5 dB 180°±10° 2.0 dB 15-1C
1472BL15B0100 1452 - 1492 50/100 1.0 dB 9.5 dB 180°±10° 2.0 dB 15-1A
1600BL15B050 1500 - 1700 50/50 1.0 dB 9.5 dB 180°±10° 2.0 dB 15-1B
1600BL15B100 1500 - 1700 50/100 1.0 dB 9.5 dB 180°±10° 2.0 dB 15-1B
1800BL18B200 1700 - 1900 50/200 0.8 dB 9.5 dB 180°±10° 2.0 dB 18-1
1850BL15B050 1700 - 2000 50/50 1.0 dB 9.5 dB 180°±10° 2.0 dB 15-1B
1850BL15B100 1700 - 2000 50/100 1.0 dB 9.5 dB 180°±10° 2.0 dB 15-1B
1850BL15B200 1700 - 2000 50/200 1.0 dB 9.5 dB 180°±10° 2.0 dB 15-1B
2100BL18B200 2000 - 2200 50/200 0.8 dB 9.5 dB 180°±10° 2.0 dB 18-1
2100BL15A100 2100 - 2200 50/100 1.0 dB 9.5 dB 180°±10° 2.0 dB 15-1
2450BL07A0100 2400 - 2500 50/100 1.3 dB 9.5 dB 180°±10° 2.0 dB See Spec
Sheet
2450BL14B050 2400 - 2500 50/50 1.5 dB 9.5 dB 180°±10° 2.0 dB 14-1A
2450BL14B100 2400 - 2500 50/100 1.3 dB 9.5 dB 180°±10° 2.0 dB 14-1A
2450BL14C050 2400 - 2500 50/50 1.2 dB 9.5 dB 180°±10° 2.0 dB 14-1A
2450BL14C100 2400 - 2500 50/100 1.2 dB 9.5 dB 180°±10° 1.5 dB 14-1A
2450BL14B200 2400 - 2500 50/200 1.2 dB 9.5 dB 180°±10° 2.0 dB 14-1A
2450BL14C200 2400 - 2500 50/200 1.3 dB 9.5 dB 180°±10° 2.0 dB 14-1A
2450BL15B050 2400 - 2500 50/50 1.0 dB 9.5 dB 180°±10° 2.0 dB 15-1C
2450BL15B100 2400 - 2500 50/100 1.0 dB 9.5 dB 180°±10° 2.0 dB 15-1C
2450BL15B150 2400 - 2500 50/150 1.0 dB 9.5 dB 180°±10° 2.0 dB 15-1A
2450BL15B200 2400 - 2500 50/200 1.0 dB 9.5 dB 180°±10° 2.0 dB 15-1C
2450BL15K050 2400 - 2500 50/50 1.2 dB 9.5 dB 180°±10° 2.0 dB 15-1C
2450BL15K100 2400 - 2500 50/100 1.0 dB 9.5 dB 180°±10° 2.0 dB 15-1C
2500BL14M050 2300 - 2700 50/50 1.2 dB 9.5 dB 180°±15° 1.5 dB 14-1A
2500BL14M100 2300 - 2700 50/100 1.2 dB 9.5 dB 180°±15° 1.5 dB 14-1A
DIRECTIONAL COUPLER - SPLITTER, 3
dB
HYBRID
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
Return Loss
(min)
Isolation
(min.)
Case Size
0880CH15A060 850 - 910 3.3 ± 0.5 dB 14.0 dB 20.0 dB 15-4
1472CH15A050 1452 - 1492 3.3 ± 0.5 dB 14.0 dB 16.0 dB 15-4
1950CH15A100 1900 - 2000 3.3 ± 0.5 dB 14.0 dB 16.0 dB 15-4
2450CH15A0100 2400 - 2500 3.3 ± 0.5 dB 14.0 dB 15.0 dB 15-4
35
www.johansontechnology.com
Basic case size drawings for above part numbers are located on pages 39-40.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
CERAMIC CHIP BALUNS, DUAL BAND
Part
Number
Frequency
(MHz)
Impedance
Unbal./Bal.
Insertion
Loss (max)
Return Loss
(min)
Phase
Difference
Case Size
0918BD41B050 B1: 900 - 940
B2: 1850 - 1920 50/50
50/50 1.2 dB
1.7 dB 8.5 dB
8.5 dB 180°±10°
180°±10° 41-2
0918BD41D050 B1: 900 - 940
B2: 1850 - 1920 50/50
50/50 1.2 dB
1.7 dB 8.5 dB
8.5 dB - See Spec Sheet
BALUNS / MATCHING NETWORKS; SPECIFIC CHIPSET APPLICATIONS
Part
Number
Frequency
(MHz)
Unbalanced
Impedance
Differential
Balanced Imp.
Insertion
Loss (max)
Return
Loss (min)
Phase
Difference
0896BM15A0001 863 - 928 50 Conj match to T.I. CC11XX and
CC430 1.5 dB 9.5 dB 180°±10°
0896FB15A0100 863 - 928 50 Conj match to AT86RF212 1.5 dB 9.5 dB 180°±10°
0953BM15A0001 950 - 956 50 Conj. match to T.I. CC11XX 2.1 dB 9.5 dB 180°±10°
2450BM15B0009 2400 - 2500 50 Conj match to ZIC2410 1.5 dB 9.5 dB 180°±10°
2450FB15K0002 2400 - 2500 50 Conj match to CSR BC03,
BC04(16-j40) 3 dB 9.54 dB 180°±10°
2450FB15K0003 2400 - 2500 50 Conj match to CSR BC03,
BC04(20-j50) 3 dB 9.54 dB 180°±10°
2450FB15K0004 2400 - 2500 50 Conj match to CSR BC03, BC04 3.2 dB 9.5 dB 180°±10°
CERAMIC CHIP BALUNS
Part
Number
Frequency
(MHz)
Impedance
Unbal./Bal.
Insertion
Loss (max)
Return Loss
(min)
Phase
Difference
Amplitude
Difference (max)
Case
Size
3600BL14M050 3300 - 3900 50/50 1.2 dB 9.5 dB 180°±15° 1.5 dB 14-1A
3600BL14M100 3300 - 3900 50/100 1.2 dB 9.5 dB 180°±15° 1.5 dB 14-1A
3700BL15B050 3400 - 4000 50/50 1.2 dB 9.5 dB 180°±25° 2.0 dB 15-1C
3700BL15B100 3400 - 4000 50/100 1.0 dB 9.5 dB 180°±20° 1.0 dB 15-1C
3700BL15B200 3400 - 4000 50/200 1.2 dB 9.5 dB 180°±20° 1.0 dB 15-1A
4000BL14U100 3100 - 4800 50/100 1.2 dB 9.5 dB 180°±20° 1.5 dB 14-1A
5425BL07A0200 4900 - 5950 50/200 1.2 dB 9.5 dB 180°±15° 2.0 dB 07-1
5250BL14B100 5150 - 5350 50/100 1.0 dB 9.5 dB 180°±15° 1.5 dB 14-1A
5250BL15B100 5150 - 5350 50/100 1.2 dB 9.5 dB 180°±10° 2.0 dB 15-1C
5325BL15B050 5150 - 5500 50/50 1.0 dB 9.5 dB 180°±10° 2.0 dB 15-1C
5388BL15B100 4900 - 5875 50/100 1.0 dB 9.5 dB 180°±10° 2.0 dB 15-1
5400BL14B100 4900 - 5875 50/100 1.0 dB 9.5 dB 180°±10° 1.5 dB 14-1A
5400BL15B050 4900 - 5900 50/50 1.0 dB 9.5 dB 180°±10° 2.0 dB 15-1
5400BL15B100 4900 - 5900 50/100 1.0 dB 9.5 dB 180°±10° 2.0 dB 15-1C
5400BL15B200 4900 - 5875 50/200 1.0 dB 9.5 dB 180°±10° 2.0 dB 15-1B
5400BL15K050 4900 - 5875 50/50 1.2 dB 8.5 dB 180°±10° 2.0 dB 15-1A
5500BL15U0100 3000 - 8000 50/100 1.8 dB 9.5 dB 180°±20° 2.0 dB 15-1A
5512BL15B100 5150 - 5875 50/100 1.0 dB 11.7 dB 180°±10° 2.0 dB 15-1C
5512BL15B100_V 5150 - 5875 50/100 1.0 dB 9.5 dB 180°±10° 2.0 dB 15-1
5800BL15B100 5725 - 5875 50/100 1.0 dB 9.5 dB 180°±8° 0.75 dB 15-1C
7128BL14A0100 6072 - 8184 50/100 1.0 dB 9.5 dB 180°±15° 1.5 dB 14-1
36
www.johansontechnology.com
CERAMIC CHIP BALUN FILTER
Part
Number
Frequency
(MHz)
Impedance
Unbal./Bal.
Insertion
Loss (max)
Return Loss
(min)
Phase
Difference
Case Size
0783FB15A0100 779 - 787 50/100 1.5 dB 9.5 dB 180°±15° 15-1
0892FB15A0100 863 - 928 50/100 1.5 dB 11.7 dB 180°±15° 15-1
0896FB15A0100 868 - 915 50/100 1.5 dB 11.7 dB 180°±15° 15-1E
2345FB16A0100 2300 - 2390 50/100 2.8 dB 9.5 dB 180°±10° 15-1
2345FB39A0050 2300 - 2390 50/50 3.2 dB 11.7 dB 180°±10° 39-4B
2450FB14K0001 2400 - 2500 50 / 28+j64 3.5 dB 9.5 dB 180°±10° 14-1A
2450FB15A0100 2400 - 2500 50/100 1.5 dB 9.5 dB 180°±10 15-1
2450FB15K0001 2400 - 2500 50 / 16+j40 3.8 dB 9.5 dB 180°±10° 15-1
2450FB15K0002 2400 - 2500 50 / 16+j40 3.0 dB 9.54 dB 180°±10° 15-1
2450FB15K0003 2400 - 2500 50 / 20+j50 3.0 dB 9.5 dB 180°±10° 15-1
2450FB15K0004 2400 - 2500 50 / 28+j64 3.2 dB 9.5 dB 180°±10° 15-1
2450FB15A050 2400 - 2500 50/50 1.5 dB 9.5 dB 180°±10° 15-1
2450FB15M0001 2400 - 2500
50 / Conjugate match
(20+j60) to MTK &
BC05 Chipset
3.0 dB 9.5 dB 180°±15° 15-1
2450FB39A050 2400 - 2500 50/50 2.0 dB 9.5 dB 180°±10° 39-2
2450FB39A0150 2400 - 2500 50/150 2.5 dB 9.5 dB 180°±10° 39-2
2450FB39B100 2400 - 2500 50/100 2.0 dB 9.5 dB 180°±10° 39-2
2450FB39K001 2400 - 2500 50 / 22+j100 3.0 dB 9.5 dB 180°± 8° See Spec Sheet
2595FB39A0050 2500 - 2690 50/50 3.2 dB 11.73 dB 180°± 10° See Spec Sheet
2450FB39C100 2400 - 2500 50/100 3.0 dB 9.5 dB 180°± 8° See Spec Sheet
2500FB16A0400 2300 - 2690 50/50+2.4nH 3.8 dB 9.5 dB 180°± 10° See Spec Sheet
2595FB16A0100 2300 - 2690 50/100 2.5 dB 9.5 dB 180°± 10° See Spec Sheet
3500FB16A0100 3400 - 3600 50/100 2.7 dB 9.5 dB 180°± 10° See Spec Sheet
3500FB39A0050 3400 - 3600 50/50 2.9 dB 9.5 dB 180°± 12° See Spec Sheet
BALUNS / MATCHING NETWORKS; SPECIFIC CHIPSET APPLICATIONS
Part
Number
Frequency
(MHz)
Unbalanced
Impedance
Differential
Balanced Imp.
Insertion
Loss (max)
Return
Loss (min)
Phase
Difference
2450FB15K0005 2400 - 2500 50 Conj match to BC series of CSR 3.5 dB 9.5 dB 180°±10°
2450FB15K0008 2400 - 2500 50 Conj match to BC series of CSR 3.5 dB 9.5 dB 180°±10°
2450FB15L0001 2400 - 2500 50 Imp. match to AT86RF230/231
& ATmega128RFA1 1.5 dB 9.5 dB 180°±10°
2450FB15M0001 2400 - 2500 50 Conj match to MTK
and BC05 chipsets 3.0 dB 9.5 dB 180°±15°
2450BM14A0002 2400 - 2500 50 Conj match to nRF24L01/
nRF24L01 2.0 dB 9.5 dB 160°±15°
2450BM15A0006 2400 - 2500 50 Conj match to STLC2690 3.5 dB 14 dB 180°±10°
2450BM15A0001 2400 - 2500 50 Conj match to T.I.
Chipsets CC2430 and CC2480 1.0 dB 10.0 dB 180°±15°
2450BM15B0003 2400 - 2500 50 Conj match to T.I. Chipset 2500 2.2 dB 10.0 dB 180°±12°
2450BM15B0002 2400 - 2500 50 Conjugate match to TI Chipset
2520 1.5 dB 10.0 dB 180°±15°
2450BM15A0002 2400 - 2500 50 Conjugate match to T.I. CC253X
and CC2540 1.5 dB 10.0 dB 180°±15°
Basic case size drawings for above part numbers are located on pages 39-40.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
37
www.johansontechnology.com
CERAMIC CHIP DIPLEXERS - LPF / HPF
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
Attenuation
Low Band
Attenuation
High Band
Return Loss
(min)
0859DP18A1920_ 824 - 894
1850 - 1990
0.75 dB
0.55 dB 20 dB min 20 dB min 12 dB
0859DP18B1920 824 - 894
1850 - 1990
0.6 dB
0.65 dB 20 dB min 20 dB min 12 dB
0892DP14A1850_ 824 - 960
1710 - 1990
0.5 dB
0.8 dB 15 dB min 25 dB min 12 dB
0892DP14B1850 824 - 960
1710 - 1990
0.6 dB
0.9 dB 15 dB min 20 dB min 9.5 dB
0892DP15A1940
824 - 960 0.7 dB
16 min. @
1648 - 1830 MHz
22 min. @
2472 - 2745 MHz
15 min. @
3300 - 3680 MHz
12 min. @
4100 - 4600 MHz
15 min. @
4920 - 5520 MHz
15 min. @
5740 - 6440 MHz
15 min. @
6560 - 7360 MHz
18 min. @
3420 - 3820 MHz
20 min. @
5130 - 5730 MHz
15 min. @
6800 -7680 MHz
18 min. @
3420 - 3820 MHz
20 min. @
5130 - 5730 MHz
15 min. @
6800 - 7680 MHz
15 dB
1710 - 1990 0.8 dB
0892DP15D1940
824 - 960 0.7 dB
16 min. @
1648 - 1830 MHz
22 min. @
2472 - 2745 MHz
15 min. @
3300 - 3680 MHz
12 min. @
4100 - 4600 MHz
15 min. @
4920 - 5520 MHz
15 min. @
5740 - 6440 MHz
15 min. @
6560 - 7360 MHz
18 min. @
3420 - 3820 MHz
20 min. @
5130 - 5730 MHz
15 min. @
6800 -7680 MHz
18 min. @
3420 - 3820 MHz
20 min. @
5130 - 5730 MHz
15 min. @
6800 - 7680 MHz
15 dB
1710 - 1990 0.8 dB
0920DP18A1795_ 880 - 960
1710 - 1880
0.75 dB
0.55 dB 20 dB min 20 dB min 12 dB
0967DP18A1795_ 954 - 980
1710 - 1880
0.75 dB
0.55 dB 20 dB min. 20 dB min. 12 dB
2400DP39A5425 2300 - 2500
4900 - 5950
1.8 dB
1.5 dB 20 dB min 20 dB min 9.5 dB
2450DP15A5512 2400 - 2500
5150 - 5875
0.70 dB
0.90 dB 20 dB min 15 dB min 9.5 dB
2450DP15B5512 2400 - 2500
5150 - 5875
0.70 dB
0.90 dB 20 dB min 15 dB min 9.5 dB
Basic case size drawings for above part numbers are located on pages 39-40.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
38
www.johansontechnology.com
CERAMIC CHIP DIPLEXERS - LPF / BPF
Part
Number
Frequency
(MHz)
Insertion
Loss (max)
Attenuation
Low Band
Attenuation
High Band
Return Loss
(min)
0892DP15B1850 824 - 960
1710 - 1990
1.3 dB
1.35 dB
16 dB min @
1628 - 1830 MHz
30 dB min @
2472 - 2745 MHz
27 dB min @
3296 - 4575 MHz
18 dB min @
824 - 960 MHz
20 dB min @
3420 - 3820 MHz
27 dB min @
5130 - 5730 MHz
9.5 dB
2450DP15D5400 2400 - 2500
4900 - 5875
0.7 dB
1.4 dB
20 dB min. @
4.8 - 6.0 GHz
20 dB min. @
7.2 - 7.5 GHz
19 dB min @
1.8 - 2.5 GHz
20 dB min. @
10.3 - 10.7 GHz
9.5 dB
2450DP15E5400 2400 - 2500
4900 - 5900
0.7 dB
1.6 dB
20 dB min @
4.8 - 6.0 GHz
17 dB min @
1.8 - 2.5 GHz
20 dB min @
7.2 - 7.5 GHz
20 dB typ. @
10.3 - 10.7 GHz
9.5 dB
2450DP15F5400 2400 - 2500
4900 - 5900
0.7 dB
1.0 dB
18 dB min @
4.8 - 6.0 GHz
19 dB min @
1.8 - 2.5 GHz
18 dB min @
7.2 - 7.5 GHz
25 dB typ. @
10.3 - 10.7 GHz
9.5 dB
2450DP15G5400 2400 - 2500
4900 - 5900
0.7 dB
1.0 dB
18 dB min @
4.8 - 6.0 GHz
19 dB min @
1.8 - 2.5 GHz
18 dB min @
7.2 - 7.5 GHz
25 dB typ. @
10.3 - 10.7 GHz
9.5 dB
2450DP15H5400 2400 - 2500
4900 - 5900
0.7 dB
1.0 dB
18 dB min @
4.8 - 6.0 GHz
19 dB min @
1.8 - 2.5 GHz
18 dB min @
7.2 - 7.5 GHz
25 dB typ. @
10.3 - 10.7 GHz
9.5 dB
2450DP15J5400 2400 - 2500
4900 - 5900
0.7 dB
1.0 dB
18 dB min @
4.8 - 6.0 GHz
19 dB min @
1.8 - 2.5 GHz
18 dB min @
7.2 - 7.5 GHz
25 dB typ. @
10.3 - 10.7 GHz
9.5 dB
Basic case size drawings for above part numbers are located on pages 39-40.
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
CERAMIC CHIP DIPLEXERS - BPF / NF
Part
Number
Frequency
(MHz)
Insertion
Loss
Attenuation Case
Size
0500DP44A1215
950 - 1450 3.6 max. (25°C) 30.0 min. @ 200 - 750MHz
See Spec
Sheet
3.9 max. (-40 - +85°C) 30.0 min. @ 1650 - 2150MHz
200 - 750 2.0 max. (25°C)
30.0 min. @ 950 - 1450MHz
2.3 max. (-40 - +85°C)
1650 - 2150 3.5 max. (25°C)
3.8 max. (-40 - +85°C)
CERAMIC CHIP DIPLEXERS - BPF / NF
Part
Number
Frequency
(MHz)
Insertion
Loss
Attenuation Low
Band
Attenuation High
Band
Return
Loss
1407DP15A2450
824 - 960 0.6 dB
15 min. @
2400 - 2500 MHz
20 min. @
824 - 1990 MHz
9.5 dB min.
1710 - 1880 1.0 dB 9.5 dB min.
1990 1.5 dB -
2400 - 2500 2.0 dB 9.5 dB min.
39
www.johansontechnology.com
Case 46-1
.335 In.
(8.5 mm)
0.63 In.
(1.6 mm)
.047 In.
(1.2 mm)
(Top)
(Side)
(Bottom)
Case 45-1
.374 In.
(9.5 mm)
.079 In.
(2.0 mm)
.047 In.
(1.2 mm)
(Top)
(Bottom)
(End)
Case 47-1
.394 In.
(10.0 mm)
.118 In.
(3.0 mm)
.030 In.
(0.77 mm)
(Top)
(Bottom)
(End)
Case 43-1
.276 In .
(7.0 mm)
.079 In .
(2.0 mm)
.047 In
.
(1.2 mm)
(T op)
( Bottom)
( End)
Case 18-4
.063 In.
(1.6 mm)
.126 In.
(3.2 mm)
.051 In.
(1.3 mm)
Case 50
.433 In .
(11.0mm)
.201 In .
(5.1 mm)
.059 In.
(1.5 mm)
(Top) (End)
.079 In .
(2.0 mm) (Top)
.197 In
.
mm) (5.0
(Side)
Th.
Case 42-1
.079 In.
(2.0 mm) (Top)
.197 In.
mm)(5.0
(Bottom)
.079 In.
mm)(2.0
.079 In.
(2.0 mm)
(End)
Case 42-2
Case 44-1
.299 In.
(7.6mm)
.138 In.
(3.5 mm)
.051 In.
(1.3 mm)
(Top) (End)
.276 In.
(7.0 mm)
.079 In.
(2.0 mm) .079 In.
(2.0 mm)
(Top)
(Bottom)
(End)
Case 43-2
.098 In.
(2.5 mm)
.079 In
(2.0 mm)
(Top) (End)
.236 In
(6.0 mm)
Case 43-3
.315 In.
(8.0 mm)
.039 In.
(1.0 mm) (T op)
.039 In
(1.0 mm)
Case 44-2
Case 51-1
.394 In
(10.0 mm)
.236 In .
(6.0 mm)
.047 In.
(1.2 mm)
(T op) (End)
Case 07-1 (EIA 0402/ 1005)
.020 In.
(0.50 mm)
.039 In.
(1.0 mm)
.015 In.
(.38 mm)
Case 14-1 (EIA 0603/ 1608)
.031 In.
(0.80 mm)
.063 In.
(1.6 mm)
Th.
14-1A Th = 0.60 mm
14-1B Th = 0.55 mm
14-1C Th = 0.35 mm .031 In.
(0.80 mm)
.063 In.
(1.6 mm)
.022 In.
(0.55 mm)
Case 14-2
ANTENNAS
IPC EXCEPT ANTENNA
.022 In.
(0.55 mm)
42-1A Th = 1.10 mm
42-1B Th = 3.00 mm
40
www.johansontechnology.com
Detailed specifications and performance curves for the RF Ceramic Component line are located on our website.
Case 39-1 (2520)
.098 In.
(2.5 mm)
.079 In.
(2.0 mm)
Th.
Case 41-1 (EIA 1210 / 3225)
.126 In.
(3.2 mm)
.098 In.
(2.5 mm)
.059 In.
(1.5 mm)
Case 18-2 (EIA 1206 / 3216)
.064 In.
(1.6 mm)
.126 In.
(3.2 mm)
.034 In.
(.85 mm)
Case 18-3 (EIA 1206 / 3216)
.063 In.
(1.6 mm)
.126 In.
(3.2 mm)
.
0
51
In .
1
(
1
.
3
mm
3
Th.
18-3A Th = .034 (.85 mm)
18-3B Th = .061 (1.3 mm)
18-3C Th = .022 (0.55 mm)
.061 In.
(1.55 mm)
.080 In.
(2.03 mm)
Th.
Case 15-4 (EIA 0805 / 2012)
.098 In.
(2.5 mm)
.126 In.
(3.2 mm)
.059 In.
(1.5 mm)
Case 41-2 (EIA 1210 / 3225)
Case 18-1 (EIA 1206 / 3216)
.064 In.
(1.6 mm)
.126 In.
(3.2 mm)
.034 In.
(.85 mm)
Case 39-2 (2520)
.098 In.
(2.5 mm)
.079 In.
(2.0 mm)
Th.
Case 15-1 (EIA 0805 / 2012)
.049 In.
(1.25 mm)
.079 In.
(2.0 mm)
Th.
15-1A Th = 0.95 mm
15-1B Th = 0.90 mm
15-1C Th = 0.85 mm
15-1D Th = 0.80 mm
15-1E Th = 0.70 mm
15-1F Th = 0.60 mm
15-1G Th = 0.55 mm
15-1H Th = 0.45 mm
Case 15-2 (EIA 0805 / 2012)
.049 In.
(1.25 mm)
.079 In.
(2.0 mm)
Th.
15-2A Th = 0.85 mm
15-2B Th = 0.70 mm
15-2C Th = 0.98 mm
15-2D Th = 0.40 mm
Case 15-3 (EIA 0805 / 2012)
.049 In.
(1.25 mm)
.079 In.
(2.0 mm)
Th.
15-3A Th = 0.95 mm
15-3B Th = 0.65 mm
15-3C Th = 0.55 mm
39-3A Th = .85 mm
39-3B Th = .75 mm
39-3C Th = .70 mm
Case 39-3 (2520)
.098 In.
(2.5 mm)
.079 In.
(2.0 mm)
Th.
39-4A Th = 1.2 mm
39-4B Th = 1.1 mm
Case 39-4 (2520)
Case 18-4 (EIA 1206 / 3216)
.063 In.
(1.6 mm)
.126 In.
(3.2 mm)
.035 In.
(.90 mm)
IPC EXCEPT ANTENNA
15-4A Th = 0.98 mm
15-4B Th = 0.70 mm
39-1A Th = 1.10 mm
39-1B Th = 0.95 mm
39-1C Th = 0.70 mm
39-1D Th = 0.90 mm 39-2A Th = 1.2 mm
39-2B Th = 1.1 mm
.098 In.
(2.5 mm)
.079 In.
(2.0 mm)
Th.
41
www.johansontechnology.comwww.johansontechnology.com
CUSTOM LTCC MODULE FOUNDRY SERVICE
Johanson Technology has the capability to produce a wide range of application specific components for
wireless communication such as Diplexer Switch, VCO, PA and highly integrated RF modules using LTCC (Low
Temperature Co-fired Ceramic) technology. We offer extensive expertise using an internally developed LTCC
tape system.
LTCC Tape Characteristics JTI
Dielectric Constant (@ 3GHz) 7.5
Dielectric Loss (@ 3GHz) 0.33%
TCE (25-300°C) (ppm/°C) 4.7
Design Rules Standard (mm) Advanced (mm)
(A) Via Hole Dia 0.125, 0.180 0.06 (min.)
(B) Via Cover Dot Dia ≥ Via + 0.03 ≥ Via + 0.02
(C) Via Center Spacing ≥ 0.20 (for 0.07 via) ≥ 0.18 (for 0.05 via)
(D) Via Cover Dot Edge to Line Edge > 0.10 > 0.08
(E) Line Width ≥ 0.10 ≥ 0.05
(F) Line to Line Spacing ≥ 0.10 ≥ 0.08
(G) Line Center Spacing ≥ 0.18 ≥ 0.13
(H) Outside Edge to Via Center ≥ 0.15 ≥ 0.135
(I) Line Over Outside Edge for Cutting > 0.05 > 0.05
(J) Outside Edge to Line Clearance > 0.10 > 0.10
(M) Buried Ground Plane Spacing 0.10 0.10
(N) Feed Thru Spacing 0.15 0.10
Substrate Thickness 0.5 to 1.6 0.3 to 2.4
Number of Layers Up to 20 Up to 30
42
www.johansontechnology.comwww.johansontechnology.com
LASERtrim® tuning capacitors are laser adjustable monolithic ceramic surface mount devices for precise
functional tuning of RF circuits. LASERtrims® have the high reliability expected of conventional multi-layer chip
capacitors and do not experience capacitance drift, flux entrapment and other reliability concerns associated
with mechanical trimmers. Excellent post-trim Q and ESR performance are exhibited at frequencies of
100 - 2000 MHz. Offered in chip sizes 0603 to 1210 with nickel barrier terminations and tape and reel packaging,
LASERtrims® are compatible with high volume SMT auto-placement and reflow techniques. These high quality,
drift-free devices are ideally suited for functional tuning applications in oscillator, filter, and antenna circuits in a
variety of wireless RF products.
Initial capacitance has a tolerance of + 25% - 0%. Trim ranges are approximate and vary with laser settings and trim pattern.
Custom LASERtrims® with features and performance tailored for specific applications are available.
MODEL SELECTION
LASERt i
®
ti it l djtb
LASERTRIM
®
SMT TUNER CAPACITORS
KEY FEATURES
• RoHS Compliant Parts Available
• Automates Functional Tuning
• High Resolution, High Accuracy Tuning Capability
• Highly Stable and Reliable After Adjustment
• Small, Standard SMD Chip Sizes
• Lower Placement Cost vs Mechanical
APPLICATIONS
• Portable Cellular Products • Wireless LAN
• Cable Modems • RFID
• Wireless Transceivers • Custom Applications
CAPACITANCE QUALITY FACTOR
RoHS P/N EIACase Size Initial Tuning Range 200 MHz 900 MHz
500L14N6R0XG4 0603 6.0 pF 6.0 - 1.00 pF > 40 ---
500L14N100XG4 0603 10.0 pF 10.0 - 2.00 pF > 125 ---
500L14N120XG4 0603 12.0 pF 12.0 - 2.00 pF > 125 ---
500L15M6R0XG4 0805 6.0 pF 6.0 - 1.00 pF > 300 > 35
500L15N100XG4 0805 10.0 pF 10.0 - 1.20 pF > 75 ---
500L15N200XG4 0805 20.0 pF 20.0 - 1.50 pF > 50 ---
500L18S2R0XG4 1206 2.0 pF 2.0 - 0.50 pF > 600 > 100
500L18M3R0XG4 1206 3.0 pF 3.0 - 1.0 pF > 500 ---
500L18M4R0XG4 1206 4.0 pF 4.0 - 1.00 pF > 500 ---
500L18M6R5XG4 1206 6.5 pF 6.5 - 1.20 pF > 300 > 40
500L18N100XG4 1206 10.0 pF 10.0 - 2.00 pF > 125 ---
500L41S2R5XG4 1210 2.5 pF 2.5 - 0.50 pF > 600 > 125
500L41S3R2XG4 1210 3.2 pF 3.2 - 0.50 pF > 450 > 125
500L41M7R0XG4 1210 7.0 pF 7.0 - 1.50 pF > 400 ---
101L41M7R0XG4 1210 7.0 pF 7.0 - 1.50 pF > 400 ---
500L41M120XG4 1210 12.0 pF 12.0 - 2.00 pF > 200 > 25
500L41N210XG4 1210 21.0 pF 21.0 - 3.00 pF > 75 ---
43
www.johansontechnology.comwww.johansontechnology.com
VISION SYSTEM
CONTROLLER
LASER BEAM
STIMULUS
POWER SUPPLY &
SIGNAL GENERATOR
CIRCUIT
(VCO, BAND PASS FILTER
MEASUREMENT
(SPECTRUM ANALYZER,
FREQUENCY COUNTER,
LASER STATION
LASERtrim® tuning capacitors are used to provide
functional RF circuitry tuning. The tuning is normally
performed at a laser station integrated into the
automated assembly line at a point beyond any
operations that may significantly alter the circuit’s RF
characteristics. Tuning is performed by a computer
controlled YAG laser beam which removes or “trims”
the top electrode material of the LASERtrim® thereby
decreasing it’s capacitance. Circuit parameters such
as frequency or voltage are monitored during tuning
and fed back to the laser controller achieving extremely
precise results. Typical capacitance change in relation
to the amount of electrode removal is shown in the
graphs below.
Surface Electrode
End Terminations
Gold Plating Nickel Electrode Ceramic
U.S. PATENT 5264983
Surface Electrode
End Terminations
Gold Plating Nickel Electrode Ceramic
Sectional Diagram: Sizes L14 & L15 Sectional Diagram: Sizes L18 & L41
TUNING DESCRIPTION
Typical Series Resonant Frequency
1
10
0 5 10 15 20 2
5
ESR (Ohms)
Fre
q
uenc
y
(
MHz
)
L15N100
L18C2R0
L18L6R5
L41N210
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Residual Capacitance
Electrode Area Removed
L41 CAP L18 CAP
Trimming Effect on Capacitance
44
www.johansontechnology.comwww.johansontechnology.com




   
1
&REQUENCY-(Z
4RIMP&
4RIMP&
4RIMP&
4RIMP&
490)#!,15!,)49&!#4/2,#2 490)#!,%32,#2


   
%32/HMS
&REQUENCY-(Z
4RIMP&
4RIMP&
4RIMP&
4RIMP&
490)#!,%32 ,.


   
%32/HMS
&REQUENCY-(Z
4RIMP&
4RIMP&
4RIMP&
4RIMP&



   
1
&REQUENCY-(Z
4RIMP&
4RIMP&
4RIMP&
4RIMP&
490)#!,15!,)49&!#4/2 ,.
490)#!,%32 ,,2


   
%32/HMS
&REQUENCY-(Z
P&
P&
P&
P&



   
1
&REQUENCY-(Z
P&
P&
P&
P&
490)#!,15!,)49&!#4/2 ,,2
LASERTRIM® TYPICAL RF CHARACTERISTICS
For L41 size electrical characteristics and graphs, please contact the factory.
45
www.johansontechnology.comwww.johansontechnology.com
L
E/B
T
W
E/B*
x
y
4500
VOLTAGE
Standard Voltage:
500 = 50 V
MARKING
Part marking not
available this series
DIELECTRIC
L = NPO
C = HI-Q NPO
N, M = RoHS
NPO
S = RoHS Hi-Q
NPO
210
PRE-TRIM CAPACITANCE
1st two digits are significant; third
digit denotes number of zeros, R =
decimal point
.
2R0 = 2.0 pF
210 = 21 pF
G
TERMINATION
G = Gold flashed
X
TOLERANCE
Initial
capacitance
tolerance is
+25% -0%
L41
CASE SIZE
See Chart
ELECTRICAL CHARACTERISTICS
WORKING VOLTAGE:
50 Volts DC
TEMPERATURE COEFFICIENT:
0 ± 30ppm /°C, -55 to 125°C
DISSIPATION FACTOR:
.001 (0.1%) max, 25°C
INSULATION RESISTANCE:
> 10 GΩ @ 25°C,WVDC;
125°C IR is 10% of 25°C rating.
DIELECTRIC STRENGTH:
2.5 X WVDC, 25°C, 50 mA max
TEST PARAMETERS:
1MHz ±50kHz, 1.0±0.2 VRMS, 25°C
ENVIRONMENTAL:
Meets the mechanical & environmental
characteristics as given for the JTI S-
Series capacitors (see second page of
S-Series specification sheet), except
terminal adhesion for all sizes is > 2.0 lbs.
-1.0%
-0.5%
0.0%
0.5%
1.0%
-55 -30 -5 20 45 70 95 120
Capacitance Change
Temperature (°C)
MECHANICAL CHARACTERISTICS
HOW TO ORDER
L14 (EIA 0603)
Inches (mm)
.058 ±.008 (1.47 ±.20)
.032 ±.008 (0.81 ±.20)
.025 MAX (0.64 MAX)
.004 MIN (0.10 MIN)
.005 MAX (0.13 MAX)
.012 MAX
(0.30 MAX)
L15 (EIA 0805)
Inches (mm)
.080 ±.008 (2.00 ±.20)
.050 ±.008 (1.27 ±.20)
.025 ±.005 (0.64 ±.13)
.004 MIN (0.10 MIN )
.005 MIN (0.13 MIN )
N/A (L14 Only)
L18 (EIA 1206)
Inches (mm)
.122 ±.008 (3.09 ±.20)
.060 ±.008 (1.52 ±.20)
.025 ±.005 (0.64 ±.13)
.004 MIN (0.10 MIN )
.005 MIN (0.13 MIN )
N/A (L14 Only)
L41 (EIA 1210)
Inches (mm)
.130 ±.008 (3.30 ±.20)
.100 ±.008 (2.54 ±.20)
.025 ±.005 (0.64 ±.13)
.004 MIN (0.10 MIN )
.005 MIN (0.13 MIN )
N/A (L14 Only)
SIZE
L
W
T
x & y
E/B
E/B*
Top View Side View Bottom View
N
TAPE MODIFIER
Tape Tape Reel
Code Type Size
T Paper 7”
R Paper 13”
Tape specs. per EIA RS481.
T
46
www.johansontechnology.comwww.johansontechnology.com
DIELECTRIC CHARACTERISTICS
B
-80%
-60%
-40%
-20%
0%
20%
40%
-55 -35 -15 5 25 45 65 85 105 125
Capacitance Change
Temperature (°C)
Y (+22% -82%)
GBBL (±15%)
GBBL-SLC TEMPERATURE COEFFICIENT
TEMPERATURE COEFFICIENT:
±15%, -55 to 125°C
VOLTAGE RATING:
16 -
50 VDC
DISSIPATION FACTOR:
.025 (2.5%) max
AVAILABLE CAPACITANCE
: 68 pF - 0.01 µF
DIELECTRIC STRENGTH:
2.5 X WVDC Min., 50 mA max
TEST PARAMETERS:
1kHz ±50Hz, 1.0±0.2 VRMS, 25°C
INSULATION RESISTANCE:
1,000 MΩ Typ.
GBBL BROADBAND SINGLE LAYER CAPACITORS
KEY FEATURES
• GBBL Dielectric Yields High Volumetric Efficiency
• Stable Temperature Coefficient: ±15% Max (-55°C to 125°C)
• Reduced Microphonics
• Offered With or Without Borders
• Thin Film TiW/Au or TiW/Ni/Au Electrodes
• RoHS
Johanson Technology’s new “GBBL” microwave capacitor features high capacitance per case size without sacrificing
the temperature stability associated with high dielectric constant materials. GBBL capacitors feature a proprietary
X7R composition which is manufactured by a two step, atmospheric controlled sintering process. The resulting micro-
structure is composed of a conducting titanate ceramic grain in contact with an insulating Grain Boundary Barrier
Layer (GBBL). The insulating boundary layer acts as a very thin dielectric. The process control of the boundary
thickness, in conjunction with the conductive grain size, provides the cumulative effect of a very high, yet stable,
dielectric constant.
GBBL TYPICAL
Conductive
Electrode
Insulating
Grains
Conductive
Grain Region
Insulating Grain
Boundary Only
Custom sizes are available - Consult Factory.
47
www.johansontechnology.com
www.johansontechnology.com
BORDER U V, B U V, B U V, B U V, B U V, B U V, B
SIZE 01 02 03 04 05 06
W In .015 ±.005 .025 ±.005 .035 ±.005 .050 ±.010 .070 ±.010 .090 ±.010
(mm) (0.38 ±.13) (0.64 ±.13) (0.89 ±.13) (1.27 ±.25) (1.78 ±.25) (2.29 ±.25)
L In .015 ±.005 .025 ±.005 .035 ±.005 .050 ±.010 .070 ±.010 .090 ±.010
(mm) (0.38 ±.13) (0.64 ±.13) (0.89 ±.13) (1.27 ±.25) (1.78 ±.25) (2.29 ±.25)
T In .007 ± .002 .007 ± .002 .007 ± .002 .007 ± .002 .007 ± .002 .007 ± .002
(mm) (0.18 ± .05) (0.18 ± .05) (0.18 ± .05) (0.18 ± .05) (0.18 ± .05) (0.18 ± .05)
B In n/a .002±.001” n/a .002±.001” n/a .002±.001” n/a .002±.001” n/a .002±.001” n/a .002±.001”
(mm) (0.05±.03) (0.05±.03) (0.05±.03) (0.05±.03) (0.05±.03) (0.05±.03)
50V
50V
25V
25V
16V
16V
50V
50V
50V
50V
50V
25V
25V
16V
16V
16V
50V
50V
50V
50V
50V
25V
16V
16V
16V
50V
50V
50V
25V
25V
16V
16V
16V
16V
50V
50V
50V
25V
25V
16V
16V
16V
16V
50V
50V
25V
25V
16V
16V
16V
50V
50V
25V
25V
16V
16V
50V
50V
25V
25V
16V
16V
50V
50V
25V
16V
16V
16V
50V
50V
25V
25V
16V
16V
16V
50V
50V
25V
25V
16V
16V
50V
50V
25V
25V
16V
16V
Capacitance
pF Code
SIZE & CAPACITANCE SELECTION
MARKING
4 = No mark
TERMINATION
N = TiW/Ni/Au
T = TiW/Au
PACKAGING
G = Gel-Pak
R = 6” Ring
S = Vial Pack / Bulk
W = Conductive
Waffle Trays
VOLTAGE
CODE
500 = 50 V
250 = 25 V
160 = 16 V
250
CASE SIZE
See
Size Chart
02
CAPACITANCE
1st two digits are
significant; third digit
denotes number of
zeros.
101 = 100 pF
471 = 470 pF
122 = 1200 pF
471
TOLERANCE
K = ± 10%
M = ± 20%
Z = + 20%
-80%
K N 4
DIELECTRIC
A = GBBL
Dielelectric
A
HOW TO ORDER GBBL-SLCS
BORDER STYLE
U = No Border
V = Dual Border
B = Single Border
V W
75
82
100
120
150
220
270
330
390
470
560
680
750
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6300
7500
8200
.01
750
820
101
121
151
221
271
331
391
471
561
681
751
821
102
122
152
182
222
272
332
392
472
562
632
752
822
103
Border Style “U” Configuration Border Style “V” & “B” Configuration
U01 V01
B01
U02 V02
B02
U03 V03
B03
U04 V04
B04
U05 V05
B05
U06 V06
B06
T
W
L
Top View
Side View Style U
T
W
L
w’
B
Top View Side View Style V
T
w’
Side View Style B
48
www.johansontechnology.comwww.johansontechnology.com
DIELECTRIC CHARACTERISTICS
SLC MICROWAVE / MILLIMETERWAVE CAPACITORS
KEY FEATURES
• Ceramic SLC Low Profile Devices Exhibit Very
High-Q / Low Insertion Loss, SRFs to 50 GHz
• Thin Film Gold Electrodes Provide Superior Wire
Bonding & Die Attach Performance
• Four SLC Device Types to Fit Many Applications:
Standard (Die) SLCs Border SLCs
Bar SLC Arrays Custom SLC Products
• RoHS - Available on all dielectrics
• Custom sizes are available - please consult factory
APPLICATIONS
• Microwave Integrated Components
• GaAs Integrated Circuits
• RF/Microwave Components
• DC Block, Bypass, Tuning
DIELECTRIC TEMPERATURE TEMPERATURE DISSIPATION INSULATION TEST AVAILABLE
CODE CONSTANT (K) COEFFICIENT RANGE FACTOR / FREQ. RESISTANCE COND. TOLERANCES
C 23 0 ± 30 ppm -55°C to +125°C < 0.15%/1MHz > 1000 GΩ 1 B,C,D ( A, <2pF)
K 37 0 ± 30 ppm -55°C to +125°C < 0.15%/1MHz > 1000 GΩ 1 B,C,D ( A, <2pF)
N 80 0 ± 30 ppm -55°C to +125°C < 0.15%/1MHz > 1000 GΩ 1 B,C,D ( A, <2pF)
(F - K, >10 pF)
U 120 -750 ± 120 ppm -55°C to +125°C < 0.25%/1MHz > 1000 GΩ 1 J,K (B-D)
V 160 -1500 ± 300 ppm -55°C to +125°C < 0.25%/1MHz > 1000 GΩ 1 J,K (B-D)
R 280 -2200 ± 500 ppm -55°C to +125°C < 0.25%/1MHz > 1000 GΩ 1 J,K (B-D)
L 350 -3300 ± 500 ppm -55°C to +125°C < 1.50%/1MHz > 1000 GΩ 1 J,K,M (B-D)
D 600 ± 10% -55°C to +125°C < 2.50%/1KHz > 100 GΩ 2 K,M
B 1200 ± 10% -55°C to +125°C < 2.50%/1KHz > 100 GΩ 2 K,M
W 2000 ± 10% -55°C to +125°C < 2.50%/1KHz > 100 GΩ 2 K,M
X 2700 ± 10% -55°C to +125°C < 2.50%/1KHz > 100 GΩ 2 K,M
T 4000 ± 15% -55°C to +125°C < 2.50%/1KHz > 100 GΩ 2 K,M
Z 8000 +22% -56% +10°C to +85°C < 4.00%/1KHz > 10 GΩ 2 M,Z
Y 12000 +22% -82% -30°C to +85°C < 4.00%/1KHz > 10 GΩ 2 M,Z
VOLTAGE RATINGS:
50 &100 WVDC
DIELECTRIC STRENGTH:
2.5 x WVDC min, 25°C, 50 mA max
TEST CONDITIONS:
1) All Values: 1.0±0.2 VRMS @1MHZ, 25°C
2) Values ≤100pF: Cond.1; Values >100pF: 1.0±0.2 VRMS @1KHZ, 25°C
49
www.johansontechnology.comwww.johansontechnology.com
Recessed SLC electrode borders help prevent shorting from conductive epoxy squeeze-up and aid visual
recognition equipment. The V-Series SLCs feature dual borders (top & bottom) while the B-Series SLCs feature
a single border (top-only.)
V-SERIES & B-SERIES CAPACITANCE SELECTION
V-SERIES & B-SERIES BORDER SLC CAPACITORS
V-SERIES & B-SERIES MECHANICAL CHARACTERISTICS
SIZE V10 V12 V15 V20 V25 V30 V40 V50
W&L ±.001” .010 .012 .015 .020 .025 .030 .040 .050
(mm) (0.25) (0.30) (0.38) (0.51) (0.64) (0.76) (1.02) (1.27)
w’ NOM. .007 .008 .011 .016 .020 .026 .036 .044
(mm) (0.17) (0.20) (0.28) (0.41) (0.51) (0.66) (0.91) (1.12)
B ±.001” .001* .001* .002 .002 .002 .002 .002 .003
(mm) (0.025)* (0.025)* (0.051) (0.051) (0.051) (0.051) (0.051) (0.076)
T ±.002” NOM. 0.004” ~ 0.008”
(mm) (NOM. 0.10 ~ 0.20)
*Min Border 0.0005” Contact factory for other sizes, values or configurations
CAP. V10 V12 V15 V20 V25 V30 V40 V50
CODE VALUE 100V 100V 100V 100V 100V 100V 100V 100V
0R1 0.1 pF C C C
0R2 0.2 pF N K C C
0R3 0.3 pF N N K C C
0R4 0.4 pF V N N K C
0R5 0.5 pF V N N K C C
0R6 0.6 pF V V N K K C
0R7 0.7 pF V V V N K C
0R8 0.8 pF R V V N K C
0R9 0.9 pF R V V N K C C
1R0 1.0 pF R V V N K K C
1R1 1.1 pF R R V N N K C
1R2 1.2 pF L R V N N K C
1R3 1.3 pF L R R N N K C
1R4 1.4 pF L R R N N K C C
1R5 1.5 pF L R R V N K C C
1R6 1.6 pF D R R V N K K C
1R7 1.7 pF D R R V N K K C
1R8 1.8 pF D L R V N K K C
1R9 1.9 pF D L L V N N K C
2R0 2.0 pF D L L V N N K C
2R1 2.1 pF D L L V N N K C
2R2 2.2 pF D L L V V N K C
2R4 2.4 pF D L L V V N K K
2R7 2.7 pF D D L V V N K K
3R0 3.0 pF B D D L V N K K
3R3 3.3 pF B D D L V N N K
3R6 3.6 pF B D D L V N N K
3R9 3.9 pF B D D L V V N K
4R3 4.3 pF B D D L R V N K
4R7 4.7 pF B B D L R V N K
5R1 5.1 pF B B D L R V N K
5R6 5.6 pF B B B L R V N N
6R2 6.2 pF W B B D R V V N
6R8 6.8 pF W B B D R V V N
CAP. V10 V12 V15 V20 V25 V30 V40 V50
CODE VALUE 100V 100V 100V 100V 100V 100V 100V 100V
6R8 6.8 pF W B B D R V V N
7R5 7.5 pF W B B D L R V N
8R2 8.2 pF W W B D L R V N
9R1 9.1 pF W W B D D R V N
100 10 pF X W W D D L V V
120 12 pF X W W B D L R V
150 15 pF T X W B D L R V
180 18 pF T X X B D D R R
200 20 pF T T X B B D L R
220 22 pF Z T X B B D L R
270 27 pF Z T T W B D D L
330 33 pF Y Z T W B B D L
390 39 pF Y Z Z X W B D L
470 47 pF Y Z Z X W B D D
500 50 pF Y Y Z X W B D D
510 51 pF Y Y Z T X B D D
560 56 pF Y Y Z T X B B D
680 68 pF Y Y T X W B D
820 82 pF Y Y Z T W B D
101 100 pF Y Z T X W B
121 120 pF Z T X W B
151 150 pF Y Z T X W
181 180 pF Y Z T T W
201 200 pF Y Z T T X
221 220 pF Y Y Z T X
271 270 pF Y Z T X
331 330 pF Y Y Z T
391 390 pF Y Z T
471 470 pF Y Z T
561 560 pF Y Y Z
681 680 pF Y Z
821 820 pF Y
102 1000 pF Y
122 1200 pF Y
Color breaks used to highlight changes in dielectric material, letters indicate the specific material.
T
W
L
w’
B
Top View Side View Style V
T
w’
Side View Style B
50
www.johansontechnology.comwww.johansontechnology.com
U-SERIES STANDARD SINGLE LAYER CAPACITORS
W
L
Top View
Color breaks used to highlight changes in dielectric material, letters indicate the specific material
SIZE U10 U12 U15 U20 U25 U30 U35 U50 U70 U90
W +.001” .010 .012 .015 .020 .025 .030 .035 .050 .070 .090
(mm) -.003” (0.25) (0.30) (0.38) (0.51) (0.64) (0.76) (0.89) (1.27) (1.78) (2.29)
L MAX. .012 .015 .020 .025 .030 .035 .040 .060 .080 .100
(mm) (0.30) (0.38) (0.51) (0.64) (0.76) (0.89) (1.02) (1.52) (2.03) (2.54)
T ±.002” NOM. 0.004” ~ 0.008”
(mm) (NOM. 0.10 ~ 0.20)
CAPACITANCE
U10 U12 U15 U20 U25 U30 U35 U50 U70 U90
CAPACITANCE
CODE VALUE
50V 50V 50V 100 V 50V 100 V 50V 100 V 50V 100 V 50V 100V 100V 100V 100V
CODE VALUE
0R1 0.1 pF C 0R1 0.1 pF
0R2 0.2 pF K C C 0R2 0.2 pF
0R3 0.3 pF N K C K C 0R3 0.3 pF
0R4 0.4 pF N N K K C C C 0R4 0.4 pF
0R5 0.5 pF U N K N C K C 0R5 0.5 pF
0R6 0.6 pF V N K N C K C C C 0R6 0.6 pF
0R7 0.7 pF V N N N K K C K C C 0R7 0.7 pF
0R8 0.8 pF V U N N K N C K C C 0R8 0.8 pF
0R9 0.9 pF R V N U K N C K C C C 0R9 0.9 pF
1R0 1.0 pF R V N U K N K K C K C C 1R0 1.0 pF
1R1 1.1 pF R V N V K N K K C K C C C 1R1 1.1 pF
1R2 1.2 pF R V N V N N K N C K C C C 1R2 1.2 pF
1R3 1.3 pF R V N V N N K N C K C K C 1R3 1.3 pF
1R4 1.4 pF L V U V N N K N K K C K C 1R4 1.4 pF
1R5 1.5 pF L V U V N N K N K K C K C 1R5 1.5 pF
1R6 1.6 pF L R U V N U K N K N C K C 1R6 1.6 pF
1R7 1.7 pF L R U V N U K N K N C K C 1R7 1.7 pF
1R8 1.8 pF L R U R N U N N K N K K C 1R8 1.8 pF
1R9 1.9 pF L R V R N U N N K N K K C 1R9 1.9 pF
2R0 2.0 pF D R V R N U N N K N K K K 2R0 2.0 pF
2R1 2.1 pF D L V R N V N N K N K K K C 2R1 2.1 pF
2R2 2.2 pF D L V R U V N U K N K N K C 2R2 2.2 pF
2R4 2.4 pF D L V R U V N U K N K N K C 2R4 2.4 pF
2R7 2.7 pF D L R L U V N U N N K N K C C 2R7 2.7 pF
3R0 3.0 pF D L R L U V N U N N K N K C C 3R0 3.0 pF
3R3 3.3 pF D L R L V R N V N U K N K C C 3R3 3.3 pF
3R6 3.6 pF D D R L V R U V N U K N K C C 3R6 3.6 pF
3R9 3.9 pF B D R L V R U V N U N N N C C 3R9 3.9 pF
4R3 4.3 pF B D R D V R U V N V N N N C C 4R3 4.3 pF
4R7 4.7 pF B D L D R R U R N V N N N K C 4R7 4.7 pF
5R1 5.1 pF B D L D R R V R U V N U N K C 5R1 5.1 pF
5R6 5.6 pF B D L D R L V R U V N U N K K 5R6 5.6 pF
6R2 6.2 pF B D D D R L V R U V N V N K K 6R2 6.2 pF
6R8 6.8 pF B B D D R L R R V R N V N K K 6R8 6.8 pF
7R5 7.5 pF W B D D R D R L V R U V N K K 7R5 7.5 pF
8R2 8.2 pF W B D B L D R L V R U V N N K 8R2 8.2 pF
9R1 9.1 pF W B D B L D R L V R U R N N N 9R1 9.1 pF
100 10 pF X B D B L D R L R L V R V N N 100 10 pF
Side View Style U
Contact factory for other sizes, values or configurations
51
www.johansontechnology.comwww.johansontechnology.com
U SERIES SLC CAPACITANCE SELECTION (CONT.)
HOW TO ORDER U, V, & B SERIES
MARKING
4 = No marking
Available
CHIP STYLE
U = Standard SLC
B = Single Border SLC
V = Dual Border SLC
VOLTAGE
CODE
500 = 50 V
101 = 100 V
500
CASE SIZE
See
Mechanical
Characteristics
15
CAPACITANCE
1st two digits are
significant; third digit
denotes number of
zeros, R denotes
decimal point.
R05 = .05 pF
2R0 = 2.0 pF
210 = 21 pF
101 = 100 pF
1R0
TOLERANCE
**A = ± 0.05 pF
*B = ± 0.10 pF
*C = ± 0.25 pF
*D = ± 0.50 pF
F = ± 1%
G = ± 2%
J = ± 5%
K = ± 10%
M = ± 20%
*Values < 10 pF
**Values ≤ 2 pF
B
TERMINATION
N = TiW/Ni/Au
T = TiW/Au
T 4
DIELECTRIC
See
Dielectric
Selection
NU
PACKAGING
G = Gel-Pak
R = 6” Ring
S = Vial Pack / Bulk
W = Conductive
Waffle Trays
Consult factory for
special packaging or
quantity per package
requests.
W
Color breaks used to highlight changes in dielectric material, letters indicate the specific material
NOTE: The “U” series thick-film terminated SLC’s are fully supported and orders may be placed using legacy part numbers.
These parts are identified by alpha case size code and contain termination codes “G” or “9” i.e. 500UDDB200JG4W.
CAPACITANCE
U10 U12 U15 U20 U25 U30 U35 U50 U70 U90
CAPACITANCE
CODE VALUE
50V 50V 50V 100 V 50V 100 V 50V 100 V 50V 100 V 50V 100V 100V 100V 100V
CODE VALUE
100 10 pF X B D B L D R L R L V R V N N 100 10 pF
120 12 pF X W B B D D L D R L V R V N N 120 12 pF
150 15 pF T W B W D B L D R L R L V N N 150 15 pF
180 18 pF T W B W D B D D L D R L V V N 180 18 pF
200 20 pF T X W W D B D D L D R D R V N 200 20 pF
220 22 pF T X W X B B D B L D R D R V N 220 22 pF
270 27 pF Z T W X B W D B D D L D R V U 270 27 pF
330 33 pF Z T X T B W B B D B L D L R U 330 33 pF
390 39 pF Z T X T W X B W D B D B L R V 390 39 pF
470 47 pF Y Z T T W X B W D B D B D R V 470 47 pF
500 50 pF Y Z T Z W X B W B B D B D R V 500 50 pF
510 51 pF Y Z T Z W X B W B B D B D R R 510 51 pF
560 56 pF Y Z T Z X T B X B W D B D R R 560 56 pF
680 68 pF Z Z Z X T W X B W B W D L R 680 68 pF
820 82 pF Y Z Y T Z W T B X B X B D R 820 82 pF
101 100 pF Y Z Y T Z X T W X B X B D L 101 100 pF
121 120 pF Y Y T Z T T W T W X B D D 121 120 pF
151 150 pF Y Z Y T Z X T W X B B D 151 150 pF
181 180 pF Y Z Y T Z T T W T W B D 181 180 pF
201 200 pF Z Y Z Z T Z X T W B B 201 200 pF
221 220 pF Y Y Z Z T Z X T W B B 221 220 pF
271 270 pF Y Z Y T Z T Z X W B 271 270 pF
331 330 pF Y Y Y Z Z T Z X W W 331 330 pF
391 390 pF Y Z Y T Z T X W 391 390 pF
471 470 pF Y Z Y Z Y T X W 471 470 pF
561 560 pF Y Y Z Y T T X 561 560 pF
681 680 pF Y Z Y Z T X 681 680 pF
821 820 pF Y Z T X 821 820 pF
102 1000 pF Y Z T T 102 1000 pF
122 1200 pF Y Z T 122 1200 pF
152 1500 pF Y Y Z 152 1500 pF
182 1800 pF Y Z 182 1800 pF
202 2000 pF Y Z 202 2000 pF
252 2500 pF Y Y 252 2500 pF
402 4000 pF Y 402 4000 pF
52
www.johansontechnology.comwww.johansontechnology.com
SLC TEMPERATURE CHARACTERISTICS
-15%
-10%
-5%
0%
5%
10%
-55 -35 -15 5 25 45 65 85 105 125
Capacitance Change
Temperature (°C)
T (± 15%)
D (± 10%)
B (± 10%)
W (±10%)
X (± 10%)
3
-40%
-30%
-20%
-10%
0%
10%
20%
30%
40%
-55 -35 -15 5 25 45 65 85 105 125
Capacitance Change
Temperature (°C)
L (-3300±500ppm)
R (-2200±500ppm)
V (-1500±300ppm)
U (-750±100ppm)
C, K, N (0ppm)
53
www.johansontechnology.comwww.johansontechnology.com
METALLIZATION TYPE
TiW/Au (Titanium-Tungsten/Gold) TiW/Ni/Au (Titanium-Tungsten/Nickel/Gold)
TERMINATION CODE
T N
ATTACHMENT
Wire / Ribbon Bonding Pb/Sn or Au/Sn Soldering
COMPATIBILITY
Silver or Gold Conductive Epoxy Au/Sn Eutectic Preform
Au/Ge or Au/Si Eutectic Preform Moderate High Temp. Resistance (325°C)
Excellent High Temperature Long term high temperature may cause Ni
Resistance (400°C) diffusion and wire bond problems on Au/Ge
Unsuitable for Pb/Sn or Au/Sn Soldering
SLC thick-film terminations ( legacy codes “G” and “9”) are still supported. Contact the factory for compatibility information.
BOND STRENGTH:
Exceeds MIL-S-883, Meth. 2011
SHEAR STRENGTH:
Exceeds MIL-S-883, Meth. 2019
SOLDER HEAT RESISTANCE:
MIL-S-202, Meth. 210-C, (260±5°C, 5 sec.)
SOLDERABILITY:
MIL-S-202, Meth. 208, (245±5°C, 5 sec.)
SHOCK:
MIL-S-202, Meth. 213-I, (100g, 6 msec.)
THERMAL SHOCK:
MIL-S-202, Meth. 107, A, (-55 to +125°C)
VIBRATION:
MIL-S-202, Meth. 204-G, (30g, 10-2000 Hz)
BURN-IN/LIFE TEST:
MIL-S-202, Meth. 108, A/F
LOW VOLTAGE HUMIDITY:
Mil-C-49464, Para. 3.17
BAROMETRIC PRESSURE:
MIL-S-202, Meth. 105, B
IMMERSION/SALT SPRAY:
MIL-S-202, Meth. 104, B
MOISTURE RESISTANCE:
MIL-S-202, Meth. 106
ENVIRONMENTAL CHARACTERISTICS FOR GBBL / SLC
METALLIZATION CHARACTERISTICS FOR GBBL / SLC
J
J
-100%
-80%
-60%
-40%
-20%
0%
-35 -25 -15 -5 5 15 25 35 45 55 65 75 85
Capacitance Change
Temperature (°C)
Y (+22% -82%)
Z (+22% -56%)
SLC TEMPERATURE CHARACTERISTICS
54
www.johansontechnology.comwww.johansontechnology.com
CUSTOM SUBSTRATES & THIN FILM PRODUCTS
Johanson Technology offers a wide range
of dielectrics for use in application specific
environments. These materials are available
both lapped and “as fired” condition as well
as metalized and non-metalized substrates.
Standard substrate sizes range from 0.50” x
0.50” to 1.50” x 1.50”, with larger sizes available
with special order . Dielectrics are available from
0.005” to 0.050” thick.
Metalized substrates may also be patterned to
customer specifications by chemical etching, abrasive
etching, or pattern plating. Please contact the factory
for other types of metallization configurations other than
a continuous top / bottom plating. Other termination
material thicknesses are available upon request.
METALIZATION CODE
TiW / Au T
TiW / Ni / Au N
TiW / Ni / Sn V
TaN / TiW / Au R
TiW / Ni / Cu / Ni / Au C
80Au / 20 Sn E
Non-Metallized X
SUBSTRATE
MATERIAL
MATERIAL
CODE KTEMPERATURE
COEFFICIENT
OPERATING
TEMPERATURE
DISSIPATION
FACTOR
ALN * F 8.8 170 W/M deg K (Th. Cond.) -55 to +125 deg. C
Alumina * G 9.9 P120 +/- 30 ppm / deg C -55 to +125 deg. C
Titanate Based C 23 0 +/- 30 ppm / deg C -55 to +125 deg. C < 0.15% @ 1 MHz
Titanate Based K 37 0 +/- 30 ppm / deg C -55 to +125 deg. C < 0.15% @ 1 MHz
Titanate Based N 80 0 +/- 30 ppm / deg C -55 to +125 deg. C < 0.15% @ 1 MHz
Titanate Based U 120 -750 +/- 120 ppm / deg C -55 to +125 deg. C < 0.25% @ 1 MHz
Titanate Based V 160 -1500 +/- 300 ppm / deg C -55 to +125 deg. C < 0.25% @ 1 MHz
Titanate Based R 280 -750 +/- 120 ppm / deg C -55 to +125 deg. C < 0.25% @ 1 MHz
Titanate Based L 350 -750 +/- 120 ppm / deg C -55 to +125 deg. C < 1.50% @ 1 MHz
Titanate Based D 600 +/- 10% (-55 to +125 C) -55 to +125 deg. C < 2.50% @ 1 kHz
Titanate Based B 1200 +/- 10% (-55 to +125 C) -55 to +125 deg. C < 2.50% @ 1 kHz
Titanate Based W 2000 +/- 10% (-55 to +125 C) -55 to +125 deg. C < 2.50% @ 1 kHz
Titanate Based X 2700 +/- 15% (-55 to +125 C) -55 to +125 deg. C < 2.50% @ 1 kHz
Titanate Based T 4000 +/- 15% (-55 to +125 C) -55 to +125 deg. C < 2.50% @ 1 kHz
Titanate Based Z 8000 +22/-56% (+10 to +85 C) -55 to +125 deg. C < 4.00% @ 1 kHz
Titanate Based Y 12000 +22/-82% (-30 to +85 C) -55 to +125 deg. C < 4.00% @ 1 kHz
Note: When metallization is requested on
both top and bottom sides, the metallization
will wrap around the sides as a standard
unless otherwise specified.
55
www.johansontechnology.com
HOW TO ORDER
PART TYPE
M = Substrate
500 12
VOLTAGE CODE
1st two digits are
significant; third digit
denotes number of
zeros, R denotes
decimal point.
6R0 = 6VDCW
250 = 25 VDCW
101 = 100 VDCW
501 = 500 VDCW
102 = 1000 VDCW
502 = 5000 VDCW
045 G S TTM
NON-STANDARD CODE
Defines non-standard
product marking, lead-
ing, testing, dielectric,
cust, code, non-std. thk.,
L, W, endband & size
codes,etc...
AA
SIZE CODES
Use size codes
for dimension
CODE DIM.
M10 = 1.0” x 1.0”
M12 = 1.2” x 1.2”
M15 = 1.5” x 1.5”
M20 = 2.0” x 2.0”
etc...
DIELECTRIC CODE
A = NPO/COG
B = BX/X7R
C = NPO
D = BX
F = ALUMINUM/
NITRIDE
G = ALUMINA
K = NPO
L = NEG TC
N = NPO
Q = P90/Hi Q
R = NEG TC
T = X7R
U = NEG TC
V = NEG TC
W = X7R
X = X7R
Y = Y5V
Z = Z5U
GS = Back side
metalization code
X = Unterminated
9 = Thick film
G = Thick film + Au
H = Thick film + Ni-Au
T = Thin Film TiW-AU
N = Thin Film TiW-NI-AU
R = TaN-TiW-Au
V = TiW-Ni-Sn
E = 80Au/20Sn
C = TiW-Ni-Cu-Ni-Au
S = Special
METALIZATION
A or Blank = Not applicable
S = Seed layer gold only
P = 100 micro” min. std
X = Special
Leave R and T blank if both
sides have the same type
metalization.
If metalization types are
different, then back side is
scribed with an X.
RT = Top side
metalization code
X = Unterminated
9 = Thick film
G = Thick film + Au
H = Thick film + Ni-Au
T = Thin Film TiW-AU
N = Thin Film TiW-NI-AU
R = TaN-TiW-Au
V = TiW-Ni-Sn
E = 80Au/20Sn
C = TiW-Ni-Cu-Ni-Au
S = Special
Blank = Both Sides are the
Same
THICKNESS
CODE
Thickness in mils
3rd digit is the
decimal point
eg: 050 = 5.0 mils
eg: 065 = 6.5 mils
eg: 128 = 12.8 mils
METALIZATION
A or Blank = Not applicable
S = Seed layer gold only
P = 100 micro” min. std
X = Special
Use blank in the S column
instead of “A” only if it the
last character in the part#
R ***
*** - ASTERISK
Required (place
holders)
K
THICKNESS
TOLERANCE
CODE
A = ± 0.5 mil
B = ± 1.0 mil
C = ± 2.0 mil
J = ± 5.0 %
K = ± 10.0 %
L = ± 15.0 %
M = ± 20.0 %
X = Special
--
T
WL
Optional Metallization,
Top, Bottom, or Both Sides
FLATNESS (Standard): 1 mil per 100 mils.
Please contact the factory for other flatness
options.
NOTE: The thickness specified in the JTI
part number is the thickness of the dielectric
material not including the termination
materials.
NOTE: The standard thickness of the Nickel
barrier (if used) is 10 - 20 microinches
(for non-bordered parts) and is 20 - 50
microinches (for bordered parts), and the
thickness of the Gold is 100 microinches
minimum. Other termination material
thicknesses are available upon request.
56
www.johansontechnology.com
TECHNICAL NOTES
GENERAL
•
RoHS Compliance
•
Storage and Solderability Checklist
RF CAPACITORS AND INDUCTORS
•
Q & ESR Explained
•
SRF & PRF for RF Capacitors
•
Measuring S-Parameters of High-Q Caps
•
S-Parameter Accuracy
•
Capacitor Mounting & S-Parameters
•
Capacitor RF Current & Power
•
Trimming Characteristics of LASERtrim® Chip Caps
•
Dishal Bandpass Filter Tuning Using LASERtrim® Chip Caps
•
Reference Oscillator Tuning Using LASERtrim® Chip Caps
•
High Frequency Inductor Modeling Utilizing MLISoft®
•
Soldering Requirements for Chip Capacitor, Chip Inductor, and Wirewound Inductor
RF COMPONENTS
•
Chip Antenna Layout Considerations for 802.11 Applications
•
Chip Balun: Defi nitions & Measurement Methodology
•
RF Antenna Tape & Reel Packaging
•
RF Component Tape & Reel Packaging
•
Soldering requirements for RFCC
The following technical notes are available for viewing on our website at
www.johansontechnology.com/technicalnotes/
57
www.johansontechnology.comwww.johansontechnology.com
Johanson capacitors are available taped per EIA standard 481. Tape options include 5”, 7” and 13” diameter reels.
Johanson uses high quality, dust free, punched 8mm paper tape and plastic embossed 8mm tape for thicker MLCs.
Quantity per reel ranges are listed in the tables below and are dependent on chip thickness.
Emb
.
1.97 min.
(50.0) .510±.020
(13±0.5)
.079±.020
(2.0±0.5)
7.0±.079
(178±2.0)
13.0±.079
(330±2.0)
or
.083±.020
(21±0.5)
.33+.059-0.0
(8.4+1.5-0.0)
.488+.078-0.0
(12.4+2.0-0.0)
or
CHIP CAPACITOR PACKAGING INFORMATION
5” DIA. REEL SIZE 7” DIA. REEL SIZE 13” DIA. REEL SIZE
REEL
QUANTITY
TAPE
TYPE
TAPE
CODE
REEL
QUANTITY
TAPE
TYPE
TAPE
CODE
REEL
QUANTITY
TAPE
TYPE
TAPE
CODE
TYPE / SIZE
R03 / 01005 20,000 Paper Y 30,000 Paper T N/A N/A N/A
R05 / 0201 500 Paper Y 15,000 Paper T N/A N/A N/A
R07 / 0402 500 Paper Y 10,000 Paper T N/A N/A N/A
R14 / 0603 500 Paper Y 4,000 Paper T 10,000 Paper R
R15 / 0805 500 Embossed Z 4,000 Embossed E 10,000 Embossed U
S42 / 1111 500 Embossed Z 2,000 Embossed E 10,000 Embossed U
S48 / 2525 N/A 250 Embossed E 1,000 Embossed U
S58 / 3838 N/A 250 Embossed E 1,000 Embossed U
LASERtrim® (All) 500 Paper Y 4.5-5.0K Paper T 15,000 Paper R
SUBSTRATES – DEPENDS ON SIZE, TYPICAL IS 10/BOX CAP ARRAYS - 100/TRAY
SINGLE LAYER CAPACITORS - UP TO 50 MIL, 400/WAFFLE PACK; > 50 MIL, 100/WAFFLE PACK
SLC’S CAN ALSO BE MOUNTED ON GRIP RINGS, RING FRAMES, AND SURFTAPE
CUSTOM PACKAGING AND QUANTITIES ARE AVAILABLE, CONTACT THE FACTORY FOR OPTIONS
PLEASE VISIT OUR WEB SITE FOR RF CERAMIC COMPONENT PACKAGING INFORMATION.
58
www.johansontechnology.com
CHIP INDUCTOR PACKAGING INFORMATION
WIREWOUND INDUCTOR PACKAGING INFORMATION
Tape Dimensions (Unit: mm)
TYPE A A’ B C D T
L-05 2.0±0.05 4.0±0.1 0.38±0.02 0.68±0.02 2.0±0.05 Max. 0.44
L-07 2.0±0.1 4.0±0.1 0.6±0.1 1.1±0.1 2.0±0.1 Max. 1.0
L-14 4.0±0.1 4.0±0.1 1.0±0.1 1.8±0.1 2.0±0.1 Max 1.3
L-15 4.0±0.1 4.0±0.1 1.6±0.1 2.4±0.1 2.0±0.1 Max 1.3
T
C
D
BA
A’
0.2 ± 0.05
8.0 ± 0.2
3.5 ± 0.1
1.75 ± 0.1
F1.5 +0.1/-0.0
Reel Dimensions (Unit: mm)
7” DIA. REEL SIZE
TYPE / SIZE REEL QUANTITY TAPE TYPE TAPE CODE
L-05 / 0201 15, 000 Paper T
L-07 / 0402 10,000 Paper T
L-14 / 0603 4,000 Paper T
L-15 / 0805 4,000 Embossed E D:13.0±0.3
2.0±0.5
178±2.0
60±0.5
11.4±1.0
9±0.3
1.2±0.2
D:21.8±0.8
B
A
F
4.0
2.0
8.0
3.5
1.75
K
T
Ø1.5
Tape Dimensions Dimensions (unit: m/m)
TYPE A B F K T W
L-07 0.70 1.20 2.00 - 0.70 8.00
L-14 1.25 1.80 4.00 1.10 0.20 8.00
L-15 1.42 2.26 4.00 1.30 0.20 8.00
Reel Dimensions
1.0
W
F60
F17
7” DIA. REEL SIZE
TYPE / SIZE REEL QUANTITY TAPE TYPE TAPE CODE
L-07 / 0402 10,000 Paper T
L-14 / 0603 3,000 Embossed E
L-15 / 0805 2,000 Embossed E
59
www.johansontechnology.com
ADVANCED MONOLYTHIC CERAMICS
OLEAN, NEW YORK
www.amccaps.com
Y1 & Y2 Safety
Certified Capacitors
High Voltage
Ceramic Capacitors
JOHANSON DIELECTRICS, INC.
SYLMAR, CALIFORNIA
www.johansondielectrics.com
X2Y®
EMI Filter Capacitors
Tanceram®
Ceramic Capacitors
Radial Leaded
High Voltage MLCCs
Switchmode
Ceramic Capacitors
Ceramic Planar
Array Filters
High Temperature
Radial Leaded MLCCs
Your Technology Partner
UNITED STATES:
HEADQUARTERS
4001 Calle Tecate,
Camarillo, California 93012
TEL (805) 389 1166 • FAX (805) 389 1821
http://www.johansontechnology.com
EUROPE:
JOHANSON EUROPE, LTD.
Flackwell Heath,
Bucks, England HP10 9NR
TEL +44 1628 531154 • FAX +44 1628 532703
eurosales@johansontechnology.com
HONG KONG:
JOHANSON HONG KONG, LTD.
Unit E, 11/F., Phase 1 Kaiser Estate
41 Man Yue St., Hunghom
Kowloon, Hong Kong
TEL +852 2334 6310 • FAX +852 2334 8858
asiasales@johansontechnology.com
Typical Product Applications:
WiFi, WiMax, UWB, Bluetooth, Zigbee, GPS, WCDMA/GSM/GPRS & custom
BALUN
LP FILTER
COUPLER DIPLEXER
BP FILTER
BALUN
BP FILTER
DEMOD
VCO
DIVIDER
MOD.
ANTENNA
(DIVERSITY)
CO
UPLER
D
IPLEXE
R
CHIP & WIREWOUND
INDUCTORS
HIGH CV &
LOW ESR CAPACITORS
B
PA
LNA
BALUN FILTER
LTCC MODULE
TAIWAN:
JOHANSON HONG KONG, LTD. TAIWAN OFFICE
10/F., No.380, Sec. 1, Keelung Road,
Taipei, Taiwan (R.O.C.)
TEL +886 2 8786 1012 • FAX +886 2 8786 1011
asiasales@johansontechnology.com
SHENZHEN:
JOHANSON TRADING (SHENZHEN) CO., LTD.
Unit 107, Block 2, 1001 Honghua Road,
Futian Free Trade Zone, Shenzhen, PRC 518038
TEL +86 755 8348 4609 • FAX +86 755 8348 4613
asiasales@johansontechnology.com