Memory Module Specification T E C H N O L O G Y KVR100X64C2/128 100MHz SDRAM 168-Pin PC100 DIMM Memory Module DESCRIPTION: This document describes ValueRAM's 16M x 64-bit (128MB), CAS Latency 2 (CL2) SDRAM (Synchronous DRAM) 100MHz memory module. The components on this module include sixteen 8M x 8-bit (2M x 8-bit x 4 Bank / PC100 components) SDRAM in TSOP packages. This 168-pin DIMM uses gold contact fingers and requires +3.3V. The electrical and mechanical specifications are as follows: FEATURES: CLK Cycle Time (tCC) Row Cycle Time (tRC) CLK to Output (tSAC) Single Power Supply of Power UL Rating min. = 10ns (CAS Latency = 2) / max. = 1000ns 70ns max. = 6ns (CAS Latency = 2) +3.3V (+/- .3V) 4.092 W (operating) 94 V - 0 Note: The module defined in this data sheet is one of several configurations available under this part number. While all configurations are compatible, the DRAM combination and/or the module height may vary from what is described here. However, in no configuration will the module height exceed 1.375" (34.92mm). Units : Inches (millimeters) 5.250 (133.350) R 0.079 (R 2.000) 0.175 (4.45) 0.157 0.004 (4.000 0.100 ) B A .118DIA .004 (3.000DIA .100) 0.250 (6.350) 0.350 (8.890) .450 (11.430) C 0.250 (6.350) 1.450 (36.830) 2.150 (54.61) 0.100Min (2.540Min) 0.700 (17.780) 0.118 (3.000) 1.375 (34.925) 0.387 0.062 (9.84 1.59) 0.089 (2.26) 5.014 (127.350) 0.118 (3.000) 4.550 (115.57) 0.200 Min (5.08 Min) 0.150 Max (3.81 Max) 0.050 0.0039 (1.270 0.10) Figure 1: KVR100X64C2/128 168-Pin SDRAM Module Document No. VALUERAM0059-001.C00 02/27/02