1
Interface Connectors for CDMA Type Cellular Phones
MQ/SF178 Series
2005.12
■Features
1. Complies with the requirements of NC-R1- 18
standards
Interface configuration also complies with the
requirements for the CDMA cellular phone of KDDI
Corporation.
2. Meets the trend for common AC adapters
Two interface configurations:
·For CDMA2000 1X
·For CDMA2000 1X EV-DO
3. Low-profile and small PCB mounting space
The height of 3.9mm and depth of 6.5 mm makes it
suitable for use in miniature cellular phones.
4. Damage protection
Protective cover over the metal shell provides resistance
excessive forces encountered in consumer applications,
when mated with corresponding plug.
5. RoHS Compliance
All components and materials comply with applicable
RoHS directives.
■Application
CDMA 2000 1X or 2000 1X EV-DO cellular phone
Low profile / Small PCB mounting space
Damage protection
Two interface configurations
Metal shell Protective cover
Signal contacts Coaxial connector
1X Key 1X EV-DO Key
3.9 18.9
6
6.5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2
50m ø max.
1000 M ø
No flashover or insulation breakdown.
No electrical discontinuity of 1 µ sec. Max.
Contact resistance: 75 m ø max.
No electrical discontinuity of 1 µ sec. Max.
Contact resistance: 75 m ø max.
Mating: 29.4N max.
Un-mating: 2N min.
Contact resistance: 75 m ø max.
Contact resistance: 75 m ø max.
Insulation resistance: 1000 M ø
Contact resistance: 75 m ø max.
Insulation resistance: 1000 M ø (Dry state)
No corrosions.
100mA
250V DC (Signal)
100V DC (Coaxial)
350V AC / one minute (Signal)
100V AC / one minute (Coaxial)
Frequency: 10 to 55 Hz, single amplitude of 1.5mm, 2 hours,
3 axis.
Acceleration of 490m/s2, 11 ms duration, sine half-wave
waveform, 3 cycles in each of the 3 axis.
With corresponding connector (including coaxial connector)
10,000 cycles
Temperature : -55ç ➝+5ç to +35ç ➝+85ç ➝+5ç to +35ç
Time : 30
➝
5
➝
30
➝
5 (Minutes) 5 cycles
96 hours at temperature of 60ç and humidity of 90% to 95%
5% salt water solution at 35 ç for 48 hours
11. Contact resistance
12.
Insulation resistance
14. Vibration
15. Shock
16.
Mating/un-mating forces
17. Durability
(mating/un-mating)
18. Temperature cycle
19. Humidity
10. Salt spray
■Specifications
■Materials
Characteristic
13.
Dielectric withstanding
voltage
Specification Conditions
Insulator
Contacts
Shell
Polyamide
Copper alloy
Stainless steel
Black color
Contact area and termination area: Selective gold plated
Tin reflow plated
UL94V-0
-------------------
-------------------
Part Material Finish Remarks
Note: Includes temperature rise caused by current flow.
■Ordering information
MQ/SF178 Series (/SF: Built-in coaxial connector)
C:CDMA2000 1X keys
E:CDMA2000 1X EV-DO keys
18 :18
P:Male contact
R:Reverse
Blank :0.2 µm min. thick at contact point, gold flash on termination area
(01) :0.5 µm min thick at contact point, gold flash on termination area
Series name
Key type
Number of contacts
Type of contact
Interface orientation
Plating specifications
1
2
3
4
5
6
-- (01)
RP18EMQ / SF178
1 2 3 4 5 6
Rating Current rating
Voltage rating
0.5A (2A can be carried via 2 random contacts)
100V AC
Operating temperature range : -30ç to +80ç
Storage temperature range : -40ç to +85ç
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
3
■Receptacles
●CDMA2000 1X key type
BCoaxial circuit diagram
0.7
0.8
2-Ø0.8
(0.3)
18.9
(2-R1)
3.9
NO.1
NO.18
(2-R0.2)
15.8
(1.55)
16.7
5.5 0.5
NO.1
NO.18
(9)
(13)
(1)
G2
A
G1
●CDMA2000 1X EV-DO key type
0.7
0.8
(0.3)
18.9
(2-R1)
3.9
NO.1
NO.18
(2-R0.2)
15.8
(1.55)
16.7
5.5 0.5
NO.1NO.18
(9)
(13)
(1)
A
G2 G1
2-Ø0.8
Plug side
G1
A
G2
G3
B
G3
G1
A
G2
G3
B
G3
Plug side Receptacle side
Un-mated Mated
Receptacle side
206-2495-0
Part number CL No. Packaging RoHS
YES
MQ/SF178-C-18PR 1,000 pieces per reel
206-2496-3
Part number CL No. Packaging RoHS
MQ/SF178-E-18PR 1,000 pieces per reel YES
G1 and G2 are not connected. G1 and G2 are connected.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
4
■Mated condition (Shown for reference)
(1.5)
Outline of the receptacle
No exposed conduetive pattern
(cover with solder resist)
15
PCB edge
1.2
1.65
3
4.8
1(Land)
2.4
6.1
P=0.5
3.2
4.2
5.2
6.2
18-0.26
4-0.5
2-Ø1(Hole)
14.9
1.2
1.2(Through hole)
1.8(Land)
0.6(Through hole)
Exposed solder pads (6)
1.2(Land)
8-R0.25(Through hole)
8-R0.55(Land)
2
6
10
6-1
2
3.8
NO.1
NO.18
BRecommended PCB mounting pattern
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
5
32
28.4
14.2 1.75
(P=12)(2)(4)
(5.7)
Ø1.5
4-R0.75
(1.5)
(1.7)
Un-reeling direction
(2) (32)
(Ø13)
(Ø80)
(Ø380)
Un-reeling direction
BReceptacle Recommended Reflow Temperature Profile
BPackaging specifications
●Embossed carrier tape dimensions
●Reel dimensions
Note1: Up to 2 cycles of reflow soldering are possible under the same conditions, provided that there is a return to normal temperature
between the first and second cycle.
Note 2: The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals.
(HRS test conditions)
●Solder paste : 96.5%Sn, 3.0%Ag, 0.5%Cu
●Test Board :
Glass epoxy, 35mm ∞ 35mm ∞ 0.8mm thick
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
6The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
USA:
HIROSE ELECTRIC U.S.A., INC.
2688 Westhills Court, Simi Valley, CA 93065-6235
Phone : 1 805 522 7958
Fax : 1 805 522 3217
http://www.hiroseusa.com
UNITED KINGDOM:
HIROSE ELECTRIC UK LTD.
Crownhill Business Centre 22 Vincent Avenue
Crownhill, Milton Keynes MK8 OAB
Phone : 44 1908 305400
Fax : 44 1908 305401
http://www.hirose.co.uk
HONG KONG:
HIROSE ELECTRIC CO., LTD.
Unit 506, Energy Plaza. 92 Granville Road, Tsim Sha
Tsui East, Kowloon
Phone : 852 2803 5338
Fax : 852 2591 6560
GERMANY:
HIROSE ELECTRIC GmbH
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : 49 711 4560 02 1
Fax : 49 711 4560 02 299
http://www.hirose.de
KOREA:
HIROSE KOREA CO., LTD.
(#2NA311,Shihwa Industrial Complex),
1261-10, Jeoungwhang-Dong, Shihung-City, Kyunggi-Do
Phone : 82 31 496 7000,7124
Fax : 82 31 496 7100
http://www.hirose.co.kr
TAIWAN:
HIROSE ELECTRIC TAIWAN CO., LTD.
No.28 Lane 247 Sec. 2 Yen Ping N,Rd.Taipei
Phone : 886 2 2557 7351,7352
Fax : 886 2 2552 9851
THE NETHERLANDS:
HIROSE ELECTRIC EUROPE B.V.
Beechavenue 46,1119 PV
Schiphol-Rijk
Phone : 31 20 6557466
Fax : 31 20 6557469
http://www.hiroseeurope.com
CHINA:
HIROSE ELECTRIC TRADING(SHANGHAI) CO., LTD.
3705-6,Bund Center,222 Yan An Road(E),Shanghai 200002
Phone : 86 21 6335 2538
Fax : 86 21 6335 0767
SINGAPORE:
HIROSE ELECTRIC CO., LTD.
10 Anson Road #34-13 International Plaza 079903
Phone : 65 6324 6113
Fax : 65 6324 6123
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
®
NOTES :
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.