MMSZ4xxxET1G Series, SZMMSZ4xxxET1G Series Zener Voltage Regulators 500 mW SOD-123 Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD-123 package. These devices provide a convenient alternative to the leadless 34-package style. http://onsemi.com Features 500 mW Rating on FR-4 or FR-5 Board Wide Zener Reverse Voltage Range - 1.8 V to 43 V Package Designed for Optimal Automated Board Assembly Small Package Size for High Density Applications ESD Rating of Class 3 (> 16 kV) per Human Body Model Peak Power - 225 W (8 x 20 ms) AEC-Q101 Qualified and PPAP Capable SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements Pb-Free Packages are Available* SOD-123 CASE 425 STYLE 1 1 Cathode MARKING DIAGRAM Mechanical Characteristics: CASE: Void-free, transfer-molded, thermosetting plastic case FINISH: Corrosion resistant finish, easily solderable MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 260C for 10 Seconds xxx M G G (Note: Microdot may be in either location) MAXIMUM RATINGS Symbol Max Unit Peak Power Dissipation @ 20 ms (Note 1) @ TL 25C Ppk 225 W Total Power Dissipation on FR-5 Board, (Note 2) @ TL = 75C Derated above 75C PD 500 6.7 mW mW/C Thermal Resistance, (Note 3) Junction-to-Ambient RqJA Thermal Resistance, (Note 3) Junction-to-Lead RqJL Junction and Storage Temperature Range 1 xxx = Device Code (Refer to page 2) M = Date Code G = Pb-Free Package POLARITY: Cathode indicated by polarity band FLAMMABILITY RATING: UL 94 V-0 Rating 2 Anode TJ, Tstg ORDERING INFORMATION Package Shipping MMSZ4xxxET1G SOD-123 (Pb-Free) 3,000 / Tape & Reel SZMMSZ4xxxET1G SOD-123 (Pb-Free) 3,000 / Tape & Reel MMSZ4xxxET3G SOD-123 (Pb-Free) 10,000 / Tape & Reel Device C/W 340 C/W 150 -55 to +150 C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Nonrepetitive current pulse per Figure 11. 2. FR-5 = 3.5 x 1.5 inches, using the minimum recommended footprint. 3. Thermal Resistance measurement obtained via infrared Scan Method. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. DEVICE MARKING INFORMATION See specific marking information in the device marking column of the Electrical Characteristics table on page 2 of this data sheet. *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. Semiconductor Components Industries, LLC, 2012 January, 2012 - Rev. 6 1 Publication Order Number: MMSZ4678ET1/D MMSZ4xxxET1G Series, SZMMSZ4xxxET1G Series ELECTRICAL CHARACTERISTICS (TA = 25C unless I otherwise noted, VF = 0.95 V Max. @ IF = 10 mA) Symbol IF Parameter VZ Reverse Zener Voltage @ IZT IZT Reverse Current IR Reverse Leakage Current @ VR VR Reverse Voltage IF Forward Current VF Forward Voltage @ IF VZ VR V IR VF IZT Zener Voltage Regulator ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA) Zener Voltage (Note 1) VZ (V) Leakage Current @ IZT IR @ VR Device Marking Min Nom Max mA mA V MMSZ4680ET1G CF8 2.09 2.2 2.31 50 4 1 MMSZ4684ET1G CG3 3.13 3.3 3.47 50 7.5 1.5 MMSZ4688ET1G CG7 4.47 4.7 4.94 50 10 3 MMSZ4689ET1G CG8 4.85 5.1 5.36 50 10 3 MMSZ4690ET1G CG9 5.32 5.6 5.88 50 10 4 MMSZ4691ET1G CH1 5.89 6.2 6.51 50 10 5 MMSZ4692ET1G CH2 6.46 6.8 7.14 50 10 5.1 MMSZ4693ET1G CH3 7.13 7.5 7.88 50 10 5.7 MMSZ4697ET1G CH7 9.50 10 10.50 50 1 7.6 MMSZ4699ET1G CH9 11.40 12 12.60 50 0.05 9.1 MMSZ4701ET1G CJ2 13.3 14 14.7 50 0.05 10.6 MMSZ4702ET1G CJ3 14.25 15 15.75 50 0.05 11.4 MMSZ4703ET1G CJ4 15.20 16 16.80 50 0.05 12.1 MMSZ4705ET1G CJ6 17.10 18 18.90 50 0.05 13.6 MMSZ4709ET1G CK1 22.80 24 25.20 50 0.01 18.2 MMSZ4711ET1G CK3 25.65 27 28.35 50 0.01 20.4 MMSZ4717ET1G CK9 40.85 43 45.15 50 0.01 32.6 Device* 1. Nominal Zener voltage is measured with the device junction in thermal equilibrium at TL = 30C 1C. *Include SZ-prefix devices where applicable. http://onsemi.com 2 MMSZ4xxxET1G Series, SZMMSZ4xxxET1G Series 8 100 7 VZ, TEMPERATURE COEFFICIENT (mV/C) VZ, TEMPERATURE COEFFICIENT (mV/C) TYPICAL CHARACTERISTICS TYPICAL TC VALUES 6 5 4 VZ @ IZT 3 2 1 0 -1 -2 -3 2 3 4 5 6 7 8 9 10 11 10 10 VZ, NOMINAL ZENER VOLTAGE (V) Figure 1. Temperature Coefficients (Temperature Range - 55C to +150C) Figure 2. Temperature Coefficients (Temperature Range - 55C to +150C) 1000 1.0 PD versus TL 0.8 0.6 100 PD versus TA 0.4 0.2 0 25 50 75 100 T, TEMPERATURE (C) RECTANGULAR WAVEFORM, TA = 25C 125 10 1 150 0.1 Figure 3. Steady State Power Derating 1 1000 1000 TJ = 25C IZ(AC) = 0.1 IZ(DC) f = 1 kHz IF, FORWARD CURRENT (mA) IZ = 1 mA 100 75 V (MMSZ5267BT1G) 91 V (MMSZ5270BT1G) 100 5 mA 20 mA 10 10 150C 1 10 100 PW, PULSE WIDTH (ms) Figure 4. Maximum Nonrepetitive Surge Power 1000 Z ZT, DYNAMIC IMPEDANCE ( ) 100 VZ, NOMINAL ZENER VOLTAGE (V) Ppk , PEAK SURGE POWER (WATTS) PD, POWER DISSIPATION (WATTS) VZ @ IZT 1 12 1.2 0 TYPICAL TC VALUES 1 10 VZ, NOMINAL ZENER VOLTAGE 100 1 0.4 Figure 5. Effect of Zener Voltage on Zener Impedance 0.5 75C 25C 0C 0.6 0.7 0.8 0.9 1.0 VF, FORWARD VOLTAGE (V) Figure 6. Typical Forward Voltage http://onsemi.com 3 1.1 1.2 MMSZ4xxxET1G Series, SZMMSZ4xxxET1G Series TYPICAL CHARACTERISTICS 1000 1000 C, CAPACITANCE (pF) 0 V BIAS 1 V BIAS I R , LEAKAGE CURRENT ( m A) TA = 25C 100 BIAS AT 50% OF VZ NOM 10 1 1 10 VZ, NOMINAL ZENER VOLTAGE (V) 100 100 10 1 +150C 0.1 0.01 0.001 + 25C 0.0001 -55C 0.00001 0 10 Figure 7. Typical Capacitance Figure 8. Typical Leakage Current I Z, ZENER CURRENT (mA) TA = 25C 10 1 0.1 0 2 4 6 8 VZ, ZENER VOLTAGE (V) 10 TA = 25C 10 1 0.1 0.01 12 100 30 50 70 VZ, ZENER VOLTAGE (V) PEAK VALUE IRSM @ 8 ms tr 90 10 PULSE WIDTH (tP) IS DEFINED AS THAT POINT WHERE THE PEAK CURRENT DECAY = 8 ms 80 70 60 50 HALF VALUE IRSM/2 @ 20 ms 40 30 tP 20 10 0 0 90 Figure 10. Zener Voltage versus Zener Current (12 V to 91 V) Figure 9. Zener Voltage versus Zener Current (VZ Up to 12 V) % OF PEAK PULSE CURRENT I Z, ZENER CURRENT (mA) 80 100 100 0.01 20 30 40 50 60 70 VZ, NOMINAL ZENER VOLTAGE (V) 20 40 60 t, TIME (ms) Figure 11. 8 20 ms Pulse Waveform http://onsemi.com 4 80 90 MMSZ4xxxET1G Series, SZMMSZ4xxxET1G Series PACKAGE DIMENSIONS SOD-123 CASE 425-04 ISSUE G D A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. A1 AAAA AAAA 1 HE DIM A A1 b c D E HE L q E 2 MIN 0.037 0.000 0.020 --0.055 0.100 0.140 0.010 0 INCHES NOM 0.046 0.002 0.024 --0.063 0.106 0.145 ----- MAX 0.053 0.004 0.028 0.006 0.071 0.112 0.152 --10 STYLE 1: PIN 1. CATHODE 2. ANODE q L b MILLIMETERS MIN NOM MAX 0.94 1.17 1.35 0.00 0.05 0.10 0.51 0.61 0.71 ----0.15 1.40 1.60 1.80 2.54 2.69 2.84 3.56 3.68 3.86 ----0.25 --10 0 C SOLDERING FOOTPRINT* EE EE EE 0.91 0.036 2.36 0.093 4.19 0.165 EE EE EE SCALE 10:1 1.22 0.048 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MMSZ4678ET1/D