SpeedTouch 610v - Alcatel

600

SERIES

SpeedTouch™

610 / 610i / 610s / 610v

Business routers

The safe way to do business

Built for excellence

Flexible solution

Specially designed for SMEs and SOHOs, the SpeedTouch 610

offers plenty of possibilities. With easy installation,

an embedded firewall, IP VPN and remote management

tools, the SpeedTouch 610 is a highly cost-effective and secure

option. Beyond the small business market, the SpeedTouch

610 series is the ideal solution for connecting regional and

branch offices back to HQ. Home users and telecommuters

will also appreciate its unique features, including a fail-proof

setup wizard.

Security

Everyone knows about hackers and the dangers they can pose to

business. SpeedTouch 610 routers have a built-in firewall that denies

all unauthorized access.

End-users, equipment retailers or ISPs can configure this powerful

firewall for a broad range of security policies and requirements.

Attacks are stopped in the router, and a log of attempted breaches

of security is kept for audit purposes. The SpeedTouch 610 keeps

you safe from security violations.

Remote sites can be securely connected at low cost with PKI as

standard. With a PPP-client, firewall, and IP VPN client all embedded

in the router, the SpeedTouch 610 Series is the low-maintenance option.

Easy installation

The SpeedTouch 610 routers are incredibly easy to install and use.

Thanks to the integrated PPP-client, there is no software to be

installed on your PC. The setup wizard guides you through

the configuration to give you a secure teleworking solution.

Plug the router into a DSL line and you’re ready to surf via PC,

laptop, or LAN. Secure remote management is also possible using

standard tools such as SNMP, Syslog, Telnet, and SNTP.

Reduced cost

Operating a helpdesk is a costly business. With the SpeedTouch 610

routers, this cost is drastically reduced. As there is no need to install

software, OS upgrades are trouble-free and the PC environment

remains stable.

Reliability

Business-critical applications need to be available 24/7. This frequently

means that servers (BASs) are duplicated with automatic switchover

at time of failure. The SpeedTouch 610 series allows connection to

two servers with two PVCs.

The SpeedTouch 610 series has a full range of network interfaces:

ADSL over POTS, ADSL over ISDN, SHDSL, symmetric and

asymmetric VDSL.

Security

• NAT/PAT

- RFC 1631 / 3022 network address translation (NAT) /

port address translation (PAT)

- Static NAPT entries

- Zero-config incoming netmeeting / H.323 support via ILS

snooping

- Support for default server

• Embedded firewall

- Packet filter firewall, capable of filtering all information available

in the IP packet header:

• Source and destination interface, IP address and port

• TCP incoming / outgoing connections, TCP header

(syn / ack / urg)

• PINGs, ICMP type and code number, type of service,

protocol

• Arbitrary bytes in the packet header

• Logging of intrusions to webpage and to syslog

• IP VPN features

- IPsec (RFC 2401 / 2407)

- Key distribution:

• Public key infrastructure (RFC 2459, ITU-T Q.817) with

X.509 digital certificates

• On-line PKI enrollment: CEP (certificate enrollment

protocol) interoperable with Entrust, VeriSign, Netscape

and Baltimore CAs

• Off-line PKI enrollment: PKCS#10 "Certification Request

Syntax Standard" and PKCS#7 "Cryptographic Message

Syntax Standard", compatible with Entrust, VeriSign,

Netscape, RSA Security (RSAS) and Xcert

• Shared secrets

- Tunnel set-up

• ISAKMP, IKE / Oakley (RFC 2408 / 2409 / 2412)

• LDAP (RFC 1777) and HTTP interface for certificate

revocation list retrieval - ITU-T X.509v2

• Xauth authentication: PAP and CHAP

- Tunnel mode

• IPsec authentication header (AH - RFC 2402) and

encapsulating security payload header (ESP - RFC 2406)

• IPsec IP payload compression (IPCOMP - RFC2393(bis)):

Stac(TM) LZS (RFC 1974 / 2395), deflate / zlib

- Encryption

• AES Rijndael, DES (RFC 2405, FIPS-46-2, FIPS-74, FIPS-81),

3DES, RC5 (RFC 2040), Blowfish, CAST, DES40,

null encryption (RFC 2410), perfect forward secrecy (PFS),

ESP CBC-mode cipher algorithms (RFC 2451)

- Hashing

• HMAC, MD5 (RFC 2403), SHA1 (RFC 2404),

SHA2 available as option (under SW key)

Easy installation and

management features

• Fail-proof setup wizard on CD ROM, customizable per operator

• Fully configurable via user-friendly web-based GUI (HTTP)

• Command line interface over serial port (EIA / TIA-232)

and over Telnet

• CLI fully available both in menu-mode and in text-mode

• SNMPv1 (RFC 1157): MIB II (RFC 1213), traps MIB

(RFC 1215), bridge MIB (RFC 1493), ADSL MIB (RFC 2662) /

SHDSL MIB, Ethernet MIB (RFC 2665), interface MIB

(RFC 2863), IPsec MIB

• Logging of events (alarms, warnings, operator sessions,...) on

webpage and to standard syslog-server

• Time synchronisation SNTPv1 (RFC 868), SNTPv2

(RFC 1119), SNTPv3 (RFC 1305) and SNTPv4 (RFC 2030)

• Windows XP "uPNP": presentation and discovery

• Remote and host software download capability

(web / HTTP, FTP)

• Configuration and software back-up and restore

• Storage of two software images, for fail-safe remote

software upgrade and easy software roll-back

• Reset to ISP-specific defaults and to generic factory defaults

• DHCP server and client (RFC 2131 / 2132), BOOTP client

(RFC 951 / 1542), DHCP-to-PPP spoofing, multiple DHCP pools

• DNS server and relay

Data Features

• Basic features

- Up to 30 simultaneous PVCs, allowing multiple simultaneous

destinations

- ATM QoS per PVC: CBR, VBR-nrt, UBR, with upstream

traffic shaping per VP / VC

- Service monitoring through ITU-T I.610 F4/F5 loopback,

alarms (AIS / RDI) and continuity checks

- RFC 1483 / 2684 multiprotocol encapsulation over AAL5 / ATM:

both LLC / SNAP and VC-based multiplexing supported

- Platform independent

• Bridging features

- Multiport (up to 10 PVCs) self-learning transparent bridge

per IEEE 802.1D for LAN interconnect

- Remote bridge ports are isolated from each other

- Wirespeed bridging performance (over 160,000 pps)

• ‘Dial-up networking’ features (PPP Relay)

- RFC 2364 point-to-point protocol over ATM via

PPPoA-to-PPTP relaying

- Multiple PPTP tunnels per end user allowing simultaneous

VPN connections between multiple hosts and destinations

• Encapsulations

- IP over ATM (IPoA):

• RFC 1483 / 2684 routed encapsulation

• Support for IP unnumbered and for multiple IP addresses

• "True" RFC 1577 / 2225 classical IP over ATM

encapsulation: supports the ATMARP and InATMARP

protocol, based on RFC 1293

- IP over Ethernet (IPoE):

• RFC 1483 / 2684 MAC encapsulated routing encapsulation

(RFC 1483 / 2684 bridged)

• Support for IP unnumbered and for multiple IP addresses

- Embedded PPP clients:

• RFC 2364 PPP over ATM encapsulation

• RFC 2516 PPP over Ethernet encapsulation

• Terminates multiple PPP sessions per RFC 1661

• Dial-up networking user GUI allowing PPP session setup

with service provider

• Session concept, PAP (RFC 1334), CHAP (RFC 1994 / 2484)

and MS-CHAP (RFC 2443) authentication

• Auto configuration IPCP (RFC 1331 / 1877)

• Dial-in, dial-on-demand and always-on PPP modes

• DHCP-to-PPP spoofing

• IPCP subnet mask option: Internet access for multiple

PCs on a single PPP session without NAT / PAT

(using multiple IP addresses)

• IP routing

- Multi-port (up to 20 PVCs) router

- Static routing

- Automatic routes (PPP, LAN)

- Source and destination routing

- Dynamic routing RIPv1 (RFC 1058) and RIPv2 (RFC 1723 / 2453),

configurable per interface - allows BAS redundancy

- Classless inter-domain routing (CIDR - RFC 1518 / 1519):

subnetting, supernetting (RFC 1338), variable length

subnet masks (VLSM - RFC 1009); support for 31-bit

prefixes (RFC 3021)

- Support for RFC 826 address resolution protocol;

proxy ARP (RFC 826) using configurable ARP table

- Wirespeed routing performance

Physical layer

ADSL-over-POTS

ADSL-over-ISDN

SHDSL

VDSL

Product

SpeedTouch 610

SpeedTouch 610i

SpeedTouch 610s

SpeedTouch 610v

Bandwidth

Up to 8.192 Mb/s

downstream and

832 kb/s upstream

Up to 2.304 Mb /s

(2-wire mode) or

4.608 Mb/s (4-wire

mode) downstream

and upstream

Up to 23 Mb/s

downstream and

4 Mb/s upstream

(asymmetrical bandplan)

or up to 13 Mb/s

downstream and

upstream (symmetrical

bandplan)

Standards

• ANSI issue 2 - ANSI T1.413i2

• Full rate - G.dmt ITU-

TG.992.1 Annex A

• ADSL lite - G.lite ITU-T G.992.2

• ETSI - ETSI ETR 006

• Full rate - G.dmt ITU-

T G.992.1 Annex A

• Germany - UR2

• SHDSL standard ITU-

TG.991.2 (G.shdsl):

symmetric PSDs and asymmetric

PSDs in line with annex A

(ANSI) and annex B (ETSI)

• Hand-shake procedure

ITU-T G.994.1 (G.hs),

including automatic annex

selection and rate adaptive mode

• Standard DMT VDSL: ETSI TS

101 270-1 & -2; ANSI

T1E1.4/2001-009R5 and -

013R2; ITU-T G.vdsl.f

Notes

• Multi-mode hand-shake -

ITU-T G.994.1 (G.hs)

• Complete embedded operations

channel (EOC) implementation

• Dying gasp (allows to distinguish

cable cut and CPE power outage)

• Wetting current (annex A and B),

including metallic termination

(annex A)

• Complete embedded operations

channel (EOC) implementation:

performance monitoring

(bit errors, signal-to-noise ratio,

loop-attenuation, ..), status reporting,

remote loopback, remote inventory

• Dying gasp (allows to distinguish

cable cut and CPE power outage)

• Supports band plans 997, 998

and Fx with same hardware.

• Excellent throughput performance,

with aggregate (up + down) rates

of 58 Mb/s over 350 m, 29 Mb/s

over 1000 m and 14.5 Mb/s over

1500 m

Hardware specifications

Modem specifications

Approved for connection to all major network operators. (Please contact your service provider for details.)

• WAN interfaces

- DSL line RJ-11

- Pin 3 / 4 for ADSL, 2-wire SHDSL and

VDSL (pin 2 / 5 via adaptor)

- Pin 3 / 4 and 2 / 5 for 4-wire SHDSL

• LAN interfaces – switch variants

- 4-port 10 / 100BaseT auto-detect Ethernet switch

IEEE 802.3 (RJ-45), half- / full-duplex with auto-MDI / MDI-X

- Available on SpeedTouch 610, 610i, 610s and 610v

• LAN interfaces – ATMF variants

- 10 / 100BaseT auto-detect Ethernet (RJ-45), half- / full-duplex

- 25.6 Mb/s ATM forum interface (RJ-45)

- Available on SpeedTouch 610, 610i and 610s

• Serial interface

- RS232 - EIA / TIA-232

• Physical specifications

- Height: 3.5 cm (1.38 in.)

- Width: 21.0 cm (8.27 in.)

- Depth: 18.5 cm (7.29 in.)

• Operating environment

- Temperature: 0° to 40° C (32° to 105° F)

- Humidity: 20% to 80%

• Power requirements

- AC voltage: 100 to 120 V AC, 220 to 240 V AC

- Frequency: 50 / 60 Hz

- Power consumption: 9 W maximum

SpeedTouch™

610 / 610i / 610s / 610v

Business routers

Package contents

• SpeedTouch 610 or 610i or 610s or 610v

• Safety guidelines

• Power unit and cables (DSL & Ethernet)

• Quick installation guide

• User’s guide

• CD with setup wizard and application notes

• In-line filters (for ADSL only)

For more information: www.speedtouchdsl.com

Printed in EU. 3CL 00371 00028 TQZCA

All trademarks are owned by their respective owners.

Product specifications subject to change without prior notice.

Small business

Internet

Firewall & VPN Firewall & VPN Corporate Telecommuter

Home-worker