Document Number: 23103 For technical questions, contact: ceramitesupport@vishay.com www.vishay.com
Revision: 04-Jun-09 1
AC Line Rated Disc Capacitors
Class X1, 400 VAC/Class Y2, 300 VAC
30LV Series
Vishay Cera-Mite
LO’ = 0.132" (3.4 mm) typ.
INSULATION RESISTANCE
Min. 1000 ΩF
TOLERANCE ON CAPACITANCE
± 10 %; ± 20 %
DISSIPATION FACTOR
2.0 % max. at 1 kHz; 1 V
CERAMIC DIELECTRIC
C0G, U2J, P3K, R3L (Class 1)
X7R, Y5U (Class 2)
CATEGORY TEMPERATURE RANGE
- 25 °C to + 125 °C
CLIMATIC CATEGORY ACC. TO EN60068-1
25/125/21
OPERATING TEMPERATURE RANGE
- 30 °C to + 125 °C
FEATURES
•Worldwide safety agency recognition
Underwriters laboratories - UL1414 and UL1283
Canadian standards association - CSA 22.2
European EN132400 to IEC 60384-14 second
edition
•Complete range of capacitance values
•Radial leads
•Compliant to RoHS directive 2002/95/EC
APPLICATIONS
•Required in AC Power Supply and Filter Applications
•Specific Industry Requirements
DESIGN
The capacitors consist of a ceramic disc of which both sides
are silver-plated. Connection leads are made of tinned
copper having a diameter of 0.032" (0.81 mm) or 0.025"
(0.64 mm). The capacitors may be supplied with radial
kinked or straight leads having a lead spacing of 0.375"
(9.5 mm) or 0.250" (6.4 mm). The standard tolerance is
± 20 %. Coating is made of flame retardant epoxy resin in
accordance with “UL 94 V-0.”
CAPACITANCE RANGE
10 pF to 0.015 µF
RATED VOLTAGE
IEC 60384-14.2: (Y2): 300 VAC, 50 Hz
IEC 60384-14.2: (X1): 400 VAC, 50 Hz
UL 1414: 250 VAC, 60 Hz
UL 1283: 250 VAC, 60 Hz
CSA 22.2 No.1: 250 VAC, 60 Hz
CSA 22.2 No.8: 400 VAC, 60 Hz
DIELECTRIC STRENGTH BETWEEN LEADS
Component test:
2500 VAC, 50 Hz, 2 s
As repeated test admissible only once with:
2250 VAC, 50 Hz, 2 s
Random sampling test (destructive test):
2500 VAC, 50 Hz, 60 s
DIELECTRIC STRENGTH OF BODY
INSULATION
2300 VAC, 50 Hz, 60 s (destructive test)
0.125"
max. (3.2 mm)
Tinned Copper Leads
1.250" min.
(32 mm)
T
max.
LS
LO
D
max. ∅
30LV Series
Vishay Cera-Mite AC Line Rated Disc Capacitors
Class X1, 400 VAC/Class Y2, 300 VAC
www.vishay.com For technical questions, contact: ceramitesupport@vishay.com Document Number: 23103
2Revision: 04-Jun-09
Notes
1. Alternate lead spacings of 7.5 mm and 10 mm are available bulk or tape and reel on request.
2. European required minimum lead clearance (prevents use of inside crimp) 0.118" (3 mm)
3. Type 30 LVS15 not available with UL 1414 recognition.
TAPE AND REEL OPTIONS
• To specify tape and reel, add two letter suffix to the ordering code (for details of the packaging code see general section of the
catalog)
Optional 3-leaded Style
An optional 3-leaded construction is available. It consists of a single capacitor with the two outside leads attached to one
electrode, and the center lead attached to the electrode. Used in feed-thru or line-to-ground applications, it allows a short ground
lead for enhanced high frequency performance.
ORDERING INFORMATION, CERAMIC X1/Y2 CAPACITORS 30LV
C
(pF)
TOL.
(%)
D
DIAMETER
INCH (mm)
T
THICKNESS
INCH (mm)
WIRE SIZE LS
LEAD SPACE
INCH (mm)
ORDERING
CODE
AWG INCH (mm)
C0G
10 ± 10 % 0.330 (8.4) 0.185 (4.7) 22 0.025 (0.64) 0.250 (6.4) 30LVQ10-R
U2J
15 ± 10 % 0.330 (8.4) 0.200 (5.1) 22 0.025 (0.64) 0.250 (6.4) 30LVQ15-R
P3K
22 ± 10 % 0.330 (8.4) 0.180 (4.6) 22 0.025 (0.64) 0.250 (6.4) 30LVQ22-R
R3L
33 ± 10 % 0.330 (8.4) 0.190 (4.8) 22 0.025 (0.64) 0.250 (6.4) 30LVQ33-R
47 ± 10 % 0.330 (8.4) 0.170 (4.3) 22 0.025 (0.64) 0.250 (6.4) 30LVQ47-R
S3L
68 ± 10 % 0.330 (8.4) 0.175 (4.4) 22 0.025 (0.64) 0.250 (6.4) 30LVQ68-R
X7R
100
± 10 %
0.330 (8.4) 0.180 (4.6)
22 0.025 (0.64) 0.250 (6.4)
30LVT10-R
150 0.330 (8.4) 0.180 (4.6) 30LVT15-R
220 0.330 (8.4) 0.195 (5.0) 30LVT22-R
330 0.330 (8.4) 0.195 (5.0) 30LVT33-R
470 0.330 (8.4) 0.180 (4.6) 30LVT47-R
560 0.330 (8.4) 0.200 (5.1) 30LVT56-R
680 0.330 (8.4) 0.180 (4.6) 30LVTT68-R
1000 0.365 (9.3) 0.185 (4.7) 30LVTD10-R
1500 0.460 (11.7) 0.180 (4.6) 30LVTD15-R
Y5U
680
± 20 %
0.330 (8.4) 0.220 (5.6)
22 0.025 (0.64) 0.250 (6.4)
30LVT68-R
1000 0.330 (8.4) 0.215 (5.5) 30LVD10-R
1500 0.330 (8.4) 0.195 (5.0) 30LVD15-R
2000 0.400 (10.2) 0.210 (5.3) 30LVD20-R
2200 0.400 (10.2) 0.200 (5.1) 30LVD22-R
2700 0.430 (10.9) 0.200 (5.1) 30LVD27-R
2800 0.430 (10.9) 0.200 (5.1) 30LVD28-R
3000 0.460 (11.7) 0.205 (5.2) 30LVD30-R
3200 0.460 (11.7) 0.200 (5.1) 30LVD32-R
3300 0.460 (11.7) 0.195 (5.0) 30LVD33-R
3900 0.490 (12.4) 0.200 (5.1) 30LVD39-R
4000 0.530 (13.5) 0.210 (5.3) 30LVD40-R
4700 0.620 (15.7) 0.220 (5.6)
20 0.032 (0.81) 0.375 (9.5)
30LVD47-R
5000 0.620 (15.7) 0.215 (5.5) 30LVD50-R
5500 0.560 (14.2) 0.195 (5.0) 30LVD55-R
5600 0.560 (14.2) 0.195 (5.0) 30LVD56-R
6800 0.680 (17.3) 0.205 (5.2) 30LVD68-R
8000 0.680 (17.3) 0.195 (5.0) 30LVD80-R
9000 0.720 (18.3) 0.200 (5.1) 30LVD90-R
0.010 µF 0.790 (20.1) 0.190 (4.8) 30LVS10-R
0.015 µF 0.900 (22.9) 0.200 (5.1) 30LVS15-R
1.250" min. (32 mm)
4 mm max.
D
max.
T
LS
b
a
G
a
G
b
c
Document Number: 23103 For technical questions, contact: ceramitesupport@vishay.com www.vishay.com
Revision: 04-Jun-09 3
30LV Series
AC Line Rated Disc Capacitors
Class X1, 400 VAC/Class Y2, 300 VAC Vishay Cera-Mite
LEAKAGE CURRENT VS. VOLTAGE
(TYPICAL)
INSERTION LOSS VS. FREQUENCY
(TYPICAL)
0
10
20
30
40
50
60
70
80
90
100
0 500 1000 1500 2000 2500
AC Voltage (V) RMS
Leakage Current (mA) RMS
30LVQ10-R
30LVQ68-R
30LVQ47-R
30LVQ33-R
30LVQ22-R
30LVQ15-R
0
0.5
1
1.5
2
0 500 1000 1500 2000 2500
AC Voltage (V) RMS
Leakage Current (mA) RMS
30LVT33- R
30LVT15- R
30LVTD10-R
30LVTT68-R
30LVT56- R
30LVT47- R
30LVT10- R
30LVT15- R
30LVT22- R
0
0.5
1
1.5
2
0 500 1000 1500 2000 2500
AC Voltage (V) RMS
Leakage Current (mA) RMS
30LVD33-R
30LVT68-R
30LVD10-R
30LVD15-R
30LVD20-R
30LVD22-R
30LVD27-R
30LVD28-R
30LVD30-R
30LVD32-R
0
2
4
6
8
10
0 500 1000 1500 2000 2500
AC Voltage (V) RMS
Leakage Current (mA) RMS
30LVD55- R
30LVT56- R
30LVD68-R
30LVD80-R
30LVD90- R
30LVS10-R
30LVD50- R
30LVD47- R
30LVDS15-R
Frequency (MHz)
Insertion Loss (dB)
10 100 1000
100
30LVQ68-R
30LVQ47-R
30LVQ33-R
30LVQ10-R
30LVQ15-R
30LVQ22-R
10
20
30
40
50
1
Frequency (MHz)
Insertion Loss (dB)
10 100 1000
100
30LVTD15-R
30LVTD10-R
30LVTT68-R
30LVT56-R
30LVT10-R
30LVT15-R
30LVT22-R
30LVT33-R
30LVT47-R
10
20
30
40
50
1
Frequency (MHz)
Insertion Loss (dB)
110 100
10
20
30
40
50
100
30LVD33-R
30LVD32-R
30LVD30-R
30LVD28-R
30LVD27-R
30LVT68-R
30LVD10-R
30LVD15-R
30LVD20-R
30LVD22-R
Fre
q
uenc
y
(
MHz
)
Insertion Loss (dB)
0.1 1 100
10
20
30
40
50
100
30LVS15-R
30LVS10-R
30LVD90-R
30LVD80-R
30LVD68-R
30LVD39-R
30LVD40-R
30LVD47-R
30LVD50-R
30LVD55-R
30LVD56-R
10
30LV Series
Vishay Cera-Mite AC Line Rated Disc Capacitors
Class X1, 400 VAC/Class Y2, 300 VAC
www.vishay.com For technical questions, contact: ceramitesupport@vishay.com Document Number: 23103
4Revision: 04-Jun-09
Note 1
UL1414 Across-The-Line, Antenna Coupling, and Line-By-Pass Capacitors:
• Across-The-Line - A capacitor connected either across a supply circuit or between one side of a supply circuit and a conductive part that may
be connected to earth ground.
• Antenna-Coupling - A capacitor connected from an antenna terminal to circuits within an appliance.
• Line-By-Pass - A capacitor connected between one side of a supply circuit and an accessible conductive part
Note 2
IEC 60384-14 Subclass Y Capacitors:
• A capacitor of a type suitable for use in situations where failure of the capacitor could lead to danger of electric shock.
• Class Y capacitors are divided into sub- classes based on type of insulation bridged and voltage ranges.
• For definitions of basic, supplementary, double and reinforced insulation, see IEC Publication 536.
• Subclass Y capacitors may be used in applications which require a Subclass X rating.
Note 3
IEC 60384-14 Subclass X Capacitors:
• A capacitor of a type suitable for use in situations where failure of the capacitor in situations where failure of the capacitor would not lead to
danger of electric shock.
• Class X capacitors are divided into subclasses according to the peak impulse test voltage superimposed on the main voltage
APPROVALS
IEC 60384 - 14/2nd Issue (1993) incl. Am.1 (1995) - Safety Tests
EN132400 (1994) - Safety Tests
That approval together with CB Test Certificate substitutes the national approval of the following nations:
Belgium France Italy Austria China Japan Spain
Denmark Greece Luxembourg Portugal Singapore Poland United Kingdom
Germany Ireland Netherlands Sweden Slovenia Hungaria Czech Republic
Finland Iceland Norway Switzerland Korea Israel
Y2 Capacitor: CB-Test Certificate: DE 1-19455 10 pF... 0.015 µF 300 VAC
X1 Capacitor: CB-Test Certificate: DE 1-19455 10 pF... 0.015 µF 400 VAC
UNDERWRITERS LABORATORIES INC.
UL 1414 Across-the-line, Antenna-coupling and Line-by-pass component 10 pF... 0.010 µF
Agency File/License E99264 V2S2 250 VAC
UL 1283 EMI Filters 10 pF... 0.015 µF
Agency File/License E99264 V2S2 250 VAC
CANADIAN STANDARDS ASSOCIATION
CSA C22.2 Across-the-line, Isolation capacitor 10 pF... 0.015 µF
No. 1 Agency File/License LR 62016-12 250 VAC
No. 8 Line-to-ground capacitor 10 pF... 0.015 µF
Agency File/License LR 62016-12 400 VAC
MARKING
100K
30LV
Y2 300 ~
X1 400 ~
CM
125 °C
Sample
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
