MUR160-F - DIODES INC

May, 2013 − Rev. 12

1Publication Order Number:

MUR120/D

MUR120 Series

SWITCHMODE

Power Rectifiers

MUR105, MUR110, MUR115, MUR120,

MUR130, MUR140, MUR160

The MUR120 series of SWITCHMODE power rectifiers are

designed for use in switching power supplies, inverters and as free

wheeling diodes.

Features

•Ultrafast 25, 50 and 75 Nanosecond Recovery Times

•175°C Operating Junction Temperature

•Low Forward Voltage

•Low Leakage Current

•High Temperature Glass Passivated Junction

•Reverse Voltage to 600 V

•Shipped in Plastic Bags; 1,000 per Bag

•Available Tape and Reel; 5,000 per Reel, by adding a “RL’’ Suffix to

the Part Number

•These are Pb−Free Devices*

Mechanical Characteristics:

•Case: Epoxy, Molded

•Weight: 0.4 Gram (Approximately)

•Finish: All External Surfaces Corrosion Resistant and Terminal

Leads are Readily Solderable

•Lead Temperature for Soldering Purposes:

260°C Max. for 10 Seconds

•Polarity: Cathode Indicated by Polarity Band

*For additional information on our Pb−Free strategy and soldering details, please

download the ON Semiconductor Soldering and Mounting Techniques

Reference Manual, SOLDERRM/D.

See detailed ordering and shipping information in the package

dimensions section on page 6 of this data sheet.

ORDERING INFORMATION

ULTRAFAST RECTIFIERS

1.0 AMPERE, 50 − 600 VOLTS

http://onsemi.com

MARKING DIAGRAM

A = Assembly Location

MUR1xx = Specific Device Code

Y = Year

WW = Work Week

G= Pb−Free Package

(Note: Microdot may be in either location)

MUR

1xx

YYWW G

AXIAL LEAD

CASE 59

STYLE 1

MUR120 Series

http://onsemi.com

MAXIMUM RATINGS

Rating Symbol

MUR

Unit

105 110 115 120 130 140 160

Peak Repetitive Reverse Voltage

Working Peak Reverse Voltage

DC Blocking Voltage

VRRM

VRWM

50 100 150 200 300 400 600 V

Average Rectified Forward Current

(Square Wave Mounting Method #3 Per Note 2)

IF(AV) 1.0 @ TA = 130°C1.0 @ TA = 120°C A

Nonrepetitive Peak Surge Current

(Surge applied at rated load conditions, halfwave,

single phase, 60 Hz)

IFSM 35 A

Operating Junction Temperature and Storage Temperature TJ, Tstg *65 to +175 °C

Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the

Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect

device reliability.

THERMAL CHARACTERISTICS

Characteristic Symbol Max Unit

Maximum Thermal Resistance, Junction−to−Ambient RqJA Note 2 °C/W

ELECTRICAL CHARACTERISTICS

Characteristic Symbol Value Unit

Maximum Instantaneous Forward Voltage (Note 1)

(iF = 1.0 Amp, TJ = 150°C)

(iF = 1.0 Amp, TJ = 25°C)

vF0.710

0.875

1.05

1.25

Maximum Instantaneous Reverse Current (Note 1)

(Rated DC Voltage, TJ = 150°C)

(Rated DC Voltage, TJ = 25°C)

iR50

2.0

150

5.0

Maximum Reverse Recovery Time

(IF = 1.0 A, di/dt = 50 A/ms)

(IF = 0.5 A, iR = 1.0 A, IREC = 0.25 A)

trr 35

Maximum Forward Recovery Time

(IF = 1.0 A, di/dt = 100 A/ms, IREC to 1.0 V)

tfr 25 50 ns

Typical Peak Reverse Recovery Current

(IF = 1.0 A, di/dt = 50 A/ms)

IRM 0.85 A

1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤2.0%.

MUR120 Series

http://onsemi.com

MUR105, MUR110, MUR115, MUR120

Figure 1. Typical Forward Voltage

vF, INSTANTANEOUS VOLTAGE (VOLTS)

0.3 0.60.4 0.8

3.0

0.01

0.03

0.02

0.2

0.1

2.0

0.7

0.3

0.05

0.5

5.0

, INSTANTANEOUS FORWARD CURRENT (AMPS)

1.3

VR, REVERSE VOLTAGE (VOLTS)

06040 100 120

100

0.01

0.001

1.0

TJ = 175°C

20 80 200

Figure 2. Typical Reverse Current*

IF(AV), AVERAGE FORWARD CURRENT (AMPS)

1.0

2.0

3.0

4.0

5.0

PF(AV)

0.5 1.0 1.5 2.0 2.5

TA, AMBIENT TEMPERATURE (°C)

050

2.0

1.0

3.0

5.0

4.0

250

Figure 3. Current Derating

(Mounting Method #3 Per Note 1)

Figure 4. Power Dissipation

5.0

10 20

VR, REVERSE VOLTAGE (VOLTS)

Figure 5. Typical Capacitance

0.5

0.07

1.0

7.0

1.0 1.2

100°CTJ = 175°C

25°C

160 180140

0.1

, REVERSE CURRENT ( A)

100°C

25°C

150100 200

* The curves shown are typical for the highest voltage device in the

voltage grouping. Typical reverse current for lower voltage selections

can be estimated from these same curves if VR is sufficiently below

rated VR.

C, CAPACITANCE (pF)

, AVERAGE POWER DISSIPATION (WATTS)

TJ = 25°C

, AVERAGE FORWARD CURRENT (AMPS)

F(AV)

30 40 50

7.0

TJ = 175°C

RATED VR

RqJA = 50°C/W

SQUARE WAVE

(CAPACITIVELOAD)

IPK

IAV

+20

SQUARE WAVE

5.0

0.7 0.9 1.1

MUR120 Series

http://onsemi.com

MUR130, MUR140, MUR160

Figure 6. Typical Forward Voltage

vF, INSTANTANEOUS VOLTAGE (VOLTS)

0.3 0.90.5 1.3

3.0

0.01

0.03

0.02

0.2

0.1

2.0

0.7

0.3

0.05

0.5

5.0

, INSTANTANEOUS FORWARD CURRENT (AMPS)

2.3

VR, REVERSE VOLTAGE (VOLTS)

0 200100 300 400

100

0.01

0.004

1.0

TJ = 175°C

700

Figure 7. Typical Reverse Current*

IF(AV), AVERAGE FORWARD CURRENT (AMPS)

1.0

2.0

3.0

4.0

5.0

PF(AV)

0.5 1.0 1.5 2.0 2.5

TA, AMBIENT TEMPERATURE (°C)

050

2.0

1.0

3.0

5.0

4.0

250

Figure 8. Current Derating

(Mounting Method #3 Per Note 2)

Figure 9. Power Dissipation

5.0

2.0

10 20

VR, REVERSE VOLTAGE (VOLTS)

Figure 10. Typical Capacitance

0.7

0.07

1.0

7.0

1.7 2.1

100°C

TJ = 175°C

25°C

600500

0.1

, REVERSE CURRENT ( A)

100°C

25°C

150100 200

* The curves shown are typical for the highest voltage device in the

voltage grouping. Typical reverse current for lower voltage selections

can be estimated from these same curves if VR is sufficiently below

rated VR.

C, CAPACITANCE (pF)

, AVERAGE POWER DISSIPATION (WATTS)

TJ = 25°C

, AVERAGE FORWARD CURRENT (AMPS)

F(AV)

30 40 50

3.0

7.0

TJ = 175°C

RATED VR

RqJA = 50°C/W

SQUARE WAVE

IPK

IAV

+20

SQUARE WAVE

5.0

1.1 1.5 1.9

400

0.04

4.0

0.4

(CAPACITIVE LOAD)

MUR120 Series

http://onsemi.com

Lead Length, L (in.)

Mounting

Method 1/8 1/4 1/2 Units

RqJA

65 72

80 87

°C/W

TYPICAL VALUES FOR RqJA IN STILL AIR

Data shown for thermal resistance, junction−to−ambient

(RqJA) for the mountings shown is to be used as typical

guideline values for preliminary engineering or in case the

tie point temperature cannot be measured.

NOTE 2. — AMBIENT MOUNTING DATA

MOUNTING METHOD 1

MOUNTING METHOD 2

MOUNTING METHOD 3

ÉÉÉÉÉÉÉÉÉÉÉ

L L

ÉÉÉÉÉÉÉÉÉÉÉÉ

L L

Vector Pin Mounting

ÉÉ

L = 3/8

Board Ground Plane

P.C. Board with

1−1/2 X 1−1/2 Copper Surface″″

″

MUR120 Series

http://onsemi.com

ORDERING INFORMATION

Device Marking Package Shipping†

MUR105 MUR105 Axial Lead* 1000 Units / Bag

MUR105G MUR105 Axial Lead* 1000 Units / Bag

MUR105RL MUR105 Axial Lead* 5000 Units / Tape & Reel

MUR105RLG MUR105 Axial Lead* 5000 Units / Tape & Reel

MUR110 MUR110 Axial Lead* 1000 Units / Bag

MUR110G MUR110 Axial Lead* 1000 Units / Bag

MUR110RL MUR110 Axial Lead* 5000 Units / Tape & Reel

MUR110RLG MUR110 Axial Lead* 5000 Units / Tape & Reel

MUR115 MUR115 Axial Lead* 1000 Units / Bag

MUR115G MUR115 Axial Lead* 1000 Units / Bag

MUR115RL MUR115 Axial Lead* 5000 Units / Tape & Reel

MUR115RLG MUR115 Axial Lead* 5000 Units / Tape & Reel

MUR120 MUR120 Axial Lead* 1000 Units / Bag

MUR120G MUR120 Axial Lead* 1000 Units / Bag

MUR120RL MUR120 Axial Lead* 5000 Units / Tape & Reel

MUR120RLG MUR120 Axial Lead* 5000 Units / Tape & Reel

MUR130 MUR130 Axial Lead* 1000 Units / Bag

MUR130G MUR130 Axial Lead* 1000 Units / Bag

MUR130RL MUR130 Axial Lead* 5000 Units / Tape & Reel

MUR130RLG MUR130 Axial Lead* 5000 Units / Tape & Reel

MUR140 MUR140 Axial Lead* 1000 Units / Bag

MUR140G MUR140 Axial Lead* 1000 Units / Bag

MUR140RL MUR140 Axial Lead* 5000 Units / Tape & Reel

MUR140RLG MUR140 Axial Lead* 5000 Units / Tape & Reel

MUR160 MUR160 Axial Lead* 1000 Units / Bag

MUR160G MUR160 Axial Lead* 1000 Units / Bag

MUR160RL MUR160 Axial Lead* 5000 Units / Tape & Reel

MUR160RLG MUR160 Axial Lead* 5000 Units / Tape & Reel

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

*This package is inherently Pb−Free.

MUR120 Series

http://onsemi.com

PACKAGE DIMENSIONS

DIM MIN MAX MIN MAX

MILLIMETERSINCHES

A4.10 5.200.161 0.205

B2.00 2.700.079 0.106

D0.71 0.860.028 0.034

F−−− 1.27−−− 0.050

K25.40 −−−1.000 −−−

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH.

3. ALL RULES AND NOTES ASSOCIATED WITH

JEDEC DO−41 OUTLINE SHALL APPLY

4. POLARITY DENOTED BY CATHODE BAND.

5. LEAD DIAMETER NOT CONTROLLED WITHIN F

DIMENSION.

AXIAL LEAD

CASE 59−10

ISSUE U

POLARITY INDICATOR

OPTIONAL AS NEEDED

(SEE STYLES)

STYLE 1:

PIN 1. CATHODE (POLARITY BAND)

2. ANODE

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,

copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC

reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any

particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without

limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications

and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC

does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for

surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where

personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and

its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,

any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture

of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5817−1050

MUR120/D

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

P.O. Box 5163, Denver, Colorado 80217 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada

Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your local

Sales Representative