Document Number: 89319 For technical questions within your region, please contact one of the following: www.vishay.com
Revision: 21-Sep-10 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1
Dual Common-Cathode High-Voltage Schottky Rectifier
MBRF2090CT, MBRF20100CT
Vishay General Semiconductor
New Product
FEATURES
• Trench MOS Schottky technology
• Low power losses, high efficiency
• Low forward voltage drop
• High forward surge capabilty
• High frequency operation
• Solder bath temperature 275 °C max. 10 s, per
JESD 22-B106
• Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
•Halogen-free according to IEC 61249-2-21 definition
TYPICAL APPLICATIONS
For use in high frequency rectifier of switching mode power
supplies, freewheeling diodes, DC/DC converters or polarity
protection application.
MECHANICAL DATA
Case: ITO-220AB
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS compliant, and
commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
PRIMARY CHARACTERISTICS
IF(AV) 2 x 10 A
VRRM 90 V, 100 V
IFSM 150 A
VF at IF = 10 A 0.65 V
TJ max. 150 °C
PIN 1 PIN 2
PIN 3
TMBS ®
ITO-220AB
123
MBRF2090CT
MBRF20100CT
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER SYMBOL MBRF2090CT MBRF20100CT UNIT
Maximum repetitive peak reverse voltage VRRM 90 100 V
Working peak reverse voltage VRWM 90 100 V
Maximum DC blocking voltage VDC 90 100 V
Maximum average forward rectified current
at TC = 133 °C
total device
IF(AV)
20
A
per diode 10
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load IFSM 150 A
Voltage rating of change (rated VR) dV/dt 10 000 V/μs
Operating junction and storage temperature range TJ, TSTG - 65 to + 150 °C
Isolation voltage from termal to heatsink t = 1 min VAC 1500 V
www.vishay.com For technical questions within your region, please contact one of the following: Document Number: 89319
2DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 21-Sep-10
MBRF2090CT, MBRF20100CT
Vishay General Semiconductor
New Product
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width ≤ 40 ms
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetititve Peak Forward Surge
Current Per Diode
ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT
Maximum instantaneous forward voltage per diode
IF = 10 A
TC = 25 °C
VF (1)
0.80
V
TC = 125 °C
0.65
IF = 20 A 0.75
Maximum reverse current per diode
at working peak reverse voltage
TJ = 25 °C
IR (2) 100 μA
TJ = 100 °C 6.0 mA
THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER SYMBOL MBRF UNIT
Typical thermal resistance per diode RθJC 3.5 °C/W
ORDERING INFORMATION (Example)
PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE
ITO-220AB MBRF20100CT-M3/4W 1.75 4W 50/tube Tube
0
4
8
12
20
050 100 150
16
Case Temperature (°C)
Average Forward Current (A)
Resistive or Inductive Load
40
60
100
80
140
120
160
1 10010
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
Number of Cycles at 60 Hz
Peak Forward Surge Current (A)
Document Number: 89319 For technical questions within your region, please contact one of the following: www.vishay.com
Revision: 21-Sep-10 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3
MBRF2090CT, MBRF20100CT
Vishay General Semiconductor
New Product
Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode
Fig. 4 - Typical Reverse Characteristics Per Diode
Fig. 5 - Typical Junction Capacitanc Per Diode
Fig. 6 - Typical Transient Thermal Impedance Per Diode
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
0 0.20.1 0.5 1.00.40.3
1
100
10
0.01
0.1
0.6 0.7 0.8 0.9
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
TJ = 150 °C
TJ = 125 °C
TJ = 25 °C
Percent of Rated Peak Reverse Voltage (%)
Instantaneous Reverse Current (mA)
2010 10040 60 80
1
10
0.01
0.1
100
0.001
30 50 70 90
TJ = 150 °C
TJ = 125 °C
TJ = 25 °C
1 10 100
1000
10 000
10
100
Reverse Voltage (V)
Junction Capacitance (pF)
TJ = 25 °C
f = 1 MHz
Vsig = 50 mVp-p
0.1 101 100
1
10
0.001
0.1
t - Pulse Duration (s)
Transient Thermal Impedance (°C/W)
Junction to Case
0.01
ITO-220AB
0.076 (1.93) REF.
45° REF.
PIN
321
0.404 (10.26)
0.384 (9.75)
0.076 (1.93) REF.
0.600 (15.24)
0.580 (14.73)
0.560 (14.22)
0.530 (13.46)
0.057 (1.45)
0.045 (1.14)
0.057 (1.45)
0.045 (1.14)
0.191 (4.85)
0.171 (4.35)
0.671 (17.04)
0.651 (16.54)
0.035 (0.89)
0.025 (0.64)
0.205 (5.21)
0.195 (4.95)
0.025 (0.64)
0.015 (0.38)
0.105 (2.67)
0.095 (2.41)
0.028 (0.71)
0.020 (0.51)
0.110 (2.79)
0.100 (2.54)
7° REF.
0.135 (3.43) DIA.
0.122 (3.08) DIA.
0.110 (2.79)
0.100 (2.54)
0.190 (4.83)
0.170 (4.32)
7° REF.
7° REF.
0.140 (3.56) DIA.
0.125 (3.17) DIA.
0.350 (8.89)
0.330 (8.38)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
