74AC139MTCX - ON SEMICONDUCTOR

To learn more about ON Semiconductor, please visit our website at

www.onsemi.com

Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers

will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor

product management systems do not have the ability to manage part nomenclature that utilizes an underscore

(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain

device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated

device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please

email any questions regarding the system integration to Fairchild_questions@onsemi.com.

Is Now Part of

ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number

of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right

to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability

arising out of the application or use of any product or circuit, and speciﬁcally disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON

Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON

Semiconductor data sheets and/or speciﬁcations can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s

technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA

Class 3 medical devices or medical devices with a same or similar classiﬁcation in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended

or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its ofﬁcers, employees, subsidiaries, afﬁliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out

of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor

is an Equal Opportunity/Afﬁrmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

January, 2017 − Rev. 2 1Publication Order Number:

74AC139/D

74AC139, 74ACT139

Dual 1-of-4 Decoder /

Demultiplexer

General Description

The AC/ACT139 is a high−speed, dual 1−of−4 decoder/demultiplexer.

The device has two independent decoders, each accepting two inputs

and providing four mutually−exclusive active−LOW outputs. Each

decoder has an active−LOW Enable input which can be used as a data

input for a 4−output demultiplexer. Each half of the AC/ACT139 can

be used as a function generator providing all four minterms of two

variables.

Features

•ICC Reduced by 50%

•Multifunction Capability

•Two Completely Independent 1−of−4 Decoders

•Active LOW Mutually Exclusive Outputs

•Outputs Source/Sink 24 mA

•ACT139 has TTL−compatible Inputs

ORDERING CODE:

Order Number Case Number Package Description

74AC139SC 751BG 16−Lead Small Outline Integrated Circuit (SOIC), JEDEC MS−012, 0.150″ Narrow Body

74AC139SJ 565BF 16−Lead Small Outline Package (SOIC), EIAJ Type II, 5.3 mm Wide

74AC139MTC 948AH 16−Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO−153, 4.4 mm Wide

74AC139PC 648 16−Lead Plastic Dual−In−Line Package (PDIP), JEDEC MS−001, 0.300″ Wide

74ACT139SC 751BG 16−Lead Small Outline Integrated Circuit (SOIC), JEDEC MS−012, 0.150″ Narrow Body

74ACT139SJ 565BF 16−Lead Small Outline Package (SOIC), EIAJ Type II, 5.3 mm Wide

74ACT139MTC 948AH 16−Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO−153, 4.4 mm Wide

74ACT139PC 648 16−Lead Plastic Dual−In−Line Package (PDIP), JEDEC MS−001, 0.300″ Wide

NOTE: Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code.

CONNECTION DIAGRAM PIN DESCRIPTIONS

Pin Names Description

A0, A1Address Inputs

EEnable Inputs

O0–O3Outputs

www.onsemi.com

74AC139, 74ACT139

www.onsemi.com

Logic Symbol/s

IEEE/IEC

TRUTH TABLE/S

Inputs Outputs

E A0A1O0O1O2O3

H X X H H H H

L L L L H H H

L H L H L H H

L L H H H L H

L H H H H H L

H = HIGH Voltage Level

L = LOW Voltage Level

X = Immaterial

Functional Description

The AC/ACT139 is a high−speed dual 1−of−4 decoder/

demultiplexer. The device has two independent decoders,

each of which accepts two binary weighted inputs (A0–A1)

and provides four mutually exclusive active−LOW outputs

(O0–O3). Each decoder has an active−LOW enable (E).

When E is HIGH all outputs are forced HIGH. The enable

can be used as the data input for a 4−output demultiplexer

application. Each half of the AC/ACT139 generates all four

minterms of two variables. These four minterms are useful

in some applications, replacing multiple gate functions as

shown in Figure 1, and thereby reducing the number of

packages required in a logic network.

Figure 1. Gate Functions (Each Half)

Logic Diagram/s

Please note that this diagram is provided only for the

understanding of logic operations and should not be used to

estimate propagation delays.

74AC139, 74ACT139

www.onsemi.com

ABSOLUTE MAXIMUM RATINGS

Supply Voltage (VCC)−0.5 V to +7.0 V

DC Input Diode Current (IIK)

VI = −0.5 V

VI = VCC + 0.5 V −20 mA

+20 mA

DC Input Voltage (VI)−0.5 V to VCC + 0.5 V

DC Output Diode Current (IOK)

VO = −0.5 V

VO = VCC + 0.5 V −20 mA

+20 mA

DC Output Voltage (VO)−0.5 V to VCC + 0.5 V

DC Output Source or Sink Current (IO)±50 mA

DC VCC or Ground Current per Output Pin (ICC or IGND)±50 mA

Storage Temperature (TSTG)−65°C to +150°C

Junction Temperature (TJ) PDIP 140°C

Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality

should not be assumed, damage may occur and reliability may be af fected.

RECOMMENDED OPERATING CONDITIONS

Supply Voltage (VCC)

ACT 2.0 V to 6.0 V

4.5 V to 5.5 V

Input Voltage (VI)0 V to VCC

Output Voltage (VO)0 V to VCC

Operating Temperature (TA)−40°C to +85°C

Minimum Input Edge Rate (DV/Dt)

AC Devices

VIN from 30% to 70% of VCC

VCC @ 3.3 V, 4.5 V, 5.5 V

125 mV/ns

Minimum Input Edge Rate (DV/Dt)

ACT Devices

VIN from 0.8 V to 2.0 V

VCC @ 4.5 V, 5.5 V

125 mV/ns

Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond

the Recommended Operating Ranges limits may affect device reliability.

74AC139, 74ACT139

www.onsemi.com

DC ELECTRICAL CHARACTERISTICS FOR AC

Symbol Parameter VCC

(V)

TA = +25°C TA = −40°C to +85°C

Units Conditions

Typ Guaranteed Limits

VIH Minimum HIGH Level

Input Voltage 3.0 1.5 2.1 2.1 V VOUT = 0.1 V

or VCC − 0.1 V

4.5 2.25 3.15 3.15

5.5 2.75 3.85 3.85

VIL Maximum LOW Level

Input Voltage 3.0 1.5 0.9 0.9 V VOUT = 0.1 V

or VCC − 0.1 V

4.5 2.25 1.35 1.35

5.5 2.75 1.65 1.65

VOH Minimum HIGH Level

Output Voltage 3.0 2.99 2.9 2.9 VIOUT = −50 mA

4.5 4.49 4.4 4.4

5.5 5.49 5.4 5.4

3.0 2.56 2.46 V VIN = VIL or VIH

IOH = −12 mA

IOH = −24 mA

IOH = −24 mA (Note 1)

4.5 3.86 3.76

5.5 4.86 4.76

VOL Maximum LOW Level

Output Voltage 3.0 0.002 0.1 0.1 VIOUT = 50 mA

4.5 0.001 0.1 0.1

5.5 0.001 0.1 0.1

3.0 0.36 0.44 V VIN = VIL or VIH

IOL = 12 mA

IOL = 24 mA

IOL = 24 mA (Note 1)

4.5 0.36 0.44

5.5 0.36 0.44

IIN (Note 3) Maximum Input

Leakage Current 5.5 ±0.1 ±1.0 mAVI = VCC, GND

IOLD Minimum Dynamic 5.5 75 mA VOLD = 1.65 V Max

IOHD Output Current (Note 2) 5.5 −75 mA VOHD = 3.85 V Min

ICC (Note 3) Maximum Quiescent

Supply Current 5.5 4.0 40.0 mAVIN = VCC or GND

Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product

performance may not be indicated by the Electrical Characteristics if operated under different conditions.

1. All outputs loaded; thresholds on input associated with output under test.

2. Maximum test duration 2.0 ms, one output loaded at a time.

3. IIN and ICC @ 3.0 V are guaranteed to be less than or equal to the respective limit @ 5.5 V VCC.

74AC139, 74ACT139

www.onsemi.com

DC ELECTRICAL CHARACTERISTICS FOR ACT

Symbol Parameter

VCC TA = +25°C TA = −40°C to +85°C

Units Conditions

(V) Typ Guaranteed Limits

VIH Minimum HIGH Level

Input Voltage 4.5 1.5 2.0 2.0 VVOUT = 0.1 V

5.5 1.5 2.0 2.0 or VCC − 0.1 V

VIL Maximum LOW Level

Input Voltage 4.5 1.5 0.8 0.8 VVOUT = 0.1 V

5.5 1.5 0.8 0.8 or VCC − 0.1 V

VOH Minimum HIGH Level

Output Voltage 4.5 4.49 4.4 4.4 VIOUT = −50 mA

5.5 5.49 5.4 5.4

4.5 3.86 3.76 V VIN = VIL or VIH

IOH = −24 mA

IOH = −24 mA (Note 4)

5.5 4.86 4.76

VOL Maximum LOW Level

Output Voltage 4.5 0.001 0.1 0.1 VIOUT = 50 mA

5.5 0.001 0.1 0.1

4.5 0.36 0.44 V VIN = VIL or VIH

IOL = 24 mA

IOL = 24 mA (Note 4)

5.5 0.36 0.44

IIN Maximum Input

Leakage Current 5.5 ±0.1 ±1.0 mAVI = VCC, GND

ICCT Maximum

ICC/Input 5.5 0.6 1.5 mA VI = VCC − 2.1 V

IOLD Minimum Dynamic 5.5 75 mA VOLD = 1.65 V Max

IOHD Output Current (Note 5) 5.5 −75 mA VOHD = 3.85 V Min

ICC Maximum Quiescent

Supply Current 5.5 4.0 40.0 mAVIN = VCC or GND

4. All outputs loaded; thresholds on input associated with output under test.

5. Maximum test duration 2.0 ms, one output loaded at a time.

74AC139, 74ACT139

www.onsemi.com

AC ELECTRICAL CHARACTERISTICS FOR AC

Symbol Parameter

VCC

(V)

(Note 6)

TA = +25°C TA = −40°C to +85°C

Units

CL = 50 pF CL = 50 pF

Min Typ Max Min Max

tPLH Propagation Delay

An to On

3.3 4.0 8.0 11.5 3.5 13.0 ns

5.0 3.0 6.5 8.5 2.5 9.5

tPHL Propagation Delay

An to On

3.3 3.0 7.0 10.0 2.5 11.0 ns

5.0 2.5 5.5 7.5 2.0 8.5

tPLH Propagation Delay

En to On

3.3 4.5 9.5 12.0 3.5 13.0 ns

5.0 3.5 7.0 8.5 3.0 10.0

tPHL Propagation Delay

En to On

3.3 4.0 8.0 10.0 3.0 11.0 ns

5.0 2.5 6.0 7.5 2.5 8.5

6. Voltage Range 3.3 is 3.3 V ± 0.3 V.

Voltage Range 5.0 is 5.0 V ± 0.5 V.

AC ELECTRICAL CHARACTERISTICS FOR ACT

Symbol Parameter

VCC

(V)

(Note 7)

TA = +25°C TA = −40°C to +85°C

Units

CL = 50 pF CL = 50 pF

Min Typ Max Min Max

tPLH Propagation Delay

An to On5.0 1.5 6.0 8.5 1.5 9.5 ns

tPHL Propagation Delay

An to On5.0 1.5 6.0 9.5 1.5 10.5 ns

tPLH Propagation Delay

En to On5.0 2.5 7.0 10.0 2.0 11.0 ns

tPHL Propagation Delay

En to On5.0 2.0 7.0 9.5 1.5 10.5 ns

7. Voltage Range 5.0 is 5.0 V ± 0.5 V

CAPACITANCE

Symbol Parameter Typ Units Conditions

CIN Input Capacitance 4.5 pF VCC = OPEN

CPD Power Dissipation Capacitance 40.0 pF VCC = 5.0V

74AC139, 74ACT139

www.onsemi.com

PACKAGE DIMENSIONS

SOIC−16, 150 mils

CASE 751BG−01

ISSUE O

TOP VIEW

PIN#1 IDENTIFICATION

ebA1 L

SIDE VIEW END VIEW

Notes:

(1) All dimensions are in millimeters. Angles in degrees.

(2) Complies with JEDEC MS-012.

SYMBOL MIN NOM MAX

0º 8º

0.10

0.33

0.19

0.25

9.80

5.80

3.80

1.27 BSC

1.75

0.25

0.51

0.25

0.50

10.00

6.20

4.00

L0.40 1.27

1.35

9.90

6.00

3.90

74AC139, 74ACT139

www.onsemi.com

PACKAGE DIMENSIONS

SOP16

CASE 565BF

ISSUE O

74AC139, 74ACT139

www.onsemi.com

PACKAGE DIMENSIONS

TSSOP−16

CASE 948AH−01

ISSUE O

74AC139, 74ACT139

www.onsemi.com

PACKAGE DIMENSIONS

PDIP−16

CASE 648−018

ISSUE V

16 9

NOTE 8

TOP VIEW

CSEATING

PLANE

0.010 CA

SIDE VIEW M

16X

D1 e

NOTE 3

MBM

END VIEW

WITH LEADS CONSTRAINED

DIM MIN MAX

INCHES

A−−−− 0.210

A1 0.015 −−−−

b0.014 0.022

C0.008 0.014

D0.735 0.775

D1 0.005 −−−−

e0.100 BSC

E0.300 0.325

M−−−− 10

−−− 5.33

0.38 −−−

0.35 0.56

0.20 0.36

18.67 19.69

0.13 −−−

2.54 BSC

7.62 8.26

−−− 10

MIN MAX

MILLIMETERS

NOTES:

1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.

2. CONTROLLING DIMENSION: INCHES.

3. DIMENSIONS A, A1 AND L ARE MEASURED WITH THE PACK-

AGE SEATED IN JEDEC SEATING PLANE GAUGE GS−3.

4. DIMENSIONS D, D1 AND E1 DO NOT INCLUDE MOLD FLASH

OR PROTRUSIONS. MOLD FLASH OR PROTRUSIONS ARE

NOT TO EXCEED 0.10 INCH.

5. DIMENSION E IS MEASURED AT A POINT 0.015 BELOW DATUM

PLANE H WITH THE LEADS CONSTRAINED PERPENDICULAR

TO DATUM C.

6. DIMENSION eB IS MEASURED AT THE LEAD TIPS WITH THE

LEADS UNCONSTRAINED.

7. DATUM PLANE H IS COINCIDENT WITH THE BOTTOM OF THE

LEADS, WHERE THE LEADS EXIT THE BODY.

8. PACKAGE CONTOUR IS OPTIONAL (ROUNDED OR SQUARE

CORNERS).

E1 0.240 0.280 6.10 7.11

eB −−−− 0.430 −−− 10.92

0.060 TYP 1.52 TYP

A2 0.115 0.195 2.92 4.95

L0.115 0.150 2.92 3.81

°°

NOTE 5

NOTE 6

e/2

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent

coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.

ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,

regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or

specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer

application by customer ’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not

designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification

in a foreign jurisdiction or any devices intended for implantation in the human body . Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized

application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and

expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such

claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This

literature is subject to all applicable copyright laws and is not for resale in any manner.

UBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5817−1050

74AC139/D

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada

Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your loc

Sales Representative

◊