DSSK 16-01A DSSK 16-01AS IFAV = 2x8 A VRRM = 100 V VF = 0.63 V Power Schottky Rectifier with common cathode VRSM V 100 100 VRRM TO-220 AB (A-Type) Type V 100 100 A DSSK 16-01A DSSK 16-01AS C A C A A TO-263 AB (AS-Type) C (TAB) A C (TAB) A A = Anode, C = Cathode , TAB = Cathode Symbol Conditions Maximum Ratings IFRMS IFAV IFAV TC = 165C; rectangular, d = 0.5 TC = 165C; rectangular, d = 0.5; per device IFSM 35 8 16 A A A TVJ = 45C; tp = 10 ms (50 Hz), sine 120 A EAS IAS = 5 A; L = 100 H; TVJ = 25C; non repetitive 1.3 mJ IAR VA =1.5 * VRRM typ.; f=10 kHz; repetitive 0.8 A 5000 V/s -55...+175 175 -55...+150 C C C 90 W 0.4...0.6 Nm 2 g (dv/dt)cr TVJ TVJM Tstg Ptot TC = 25C Md mounting torque (Version A only) Weight typical Features * * * * * International standard package Very low VF Extremely low switching losses Low IRM-values Epoxy meets UL 94V-0 Applications * Rectifiers in switch mode power supplies (SMPS) * Free wheeling diode in low voltage converters Advantages * High reliability circuit operation * Low voltage peaks for reduced protection circuits * Low noise switching * Low losses Dimensions see Outlines.pdf Symbol Conditions Characteristic Values typ. max. IR VR = VRRM; TVJ = 25C VR = VRRM; TVJ = 125C VF IF = 8 A; IF = 8 A; IF = 16 A; TVJ = 125C TVJ = 25C TVJ = 125C RthJC RthCH(Version A only) 0.5 0.3 2.5 mA mA 0.63 0.81 0.75 V V V 1.7 K/W K/W IXYS reserves the right to change limits, Conditions and dimensions. (c) 2005 IXYS All rights reserved 515 Pulse test: Pulse Width = 5 ms, Duty Cycle < 2.0 % Data according to IEC 60747 and per diode unless otherwise specified. 1-2 DSSK 16-01A DSSK 16-01AS 20 10 A mA T =175C VJ 10 pF 1 IR IF 1000 CT 150C 125C 0.1 100C TVJ = 175C 150C 125C 25C 0.01 75C 50C 0.001 1 0.0 100 25C 0.2 0.4 0.6 0.8 V 1.0 0 20 40 60 40 A 35 60 80 V 100 VR A IFSM 25 d=0.5 DC 20 d= DC 0.5 0.33 0.25 0.17 0.08 20 15 15 10 10 5 5 0 0 0 40 80 120 TC 160C Fig. 4 Avg. forward current IF(AV) vs. case temperature TC ZthJC 40 Fig. 3 Typ. junction capacitance CT versus reverse voltage VR Fig. 2 Typ. reverse current IR versus reverse voltage P(AV) 25 K/W 20 35 W 30 30 IF(AV) 1 0 80 V 100 VR VF Fig. 1 Max. forward voltage drop characteristics TVJ= 25C 10 0.0001 0 5 10 15 20 25 IF(AV) 30 A s tP Fig. 5 Forward power loss characteristics D=0.5 0.33 0.25 0.17 0.08 0.1 Single Pulse (Thermal Resistance) DSSK 16-01A 0.01 0.0001 0.001 0.01 0.1 1 s Note: All curves are per Diode 10 t IXYS reserves the right to change limits, Conditions and dimensions. (c) 2005 IXYS All rights reserved 515 Fig. 6 Transient thermal impedance junction to case at various duty cycles 2-2