Manganese Lithium Rechargeable Batteries (ML Series) TAB CONFIGURATIONS Tab Type Model No. With Insulation Wrap Without Insulation Wrap Nominal Configuration Diagram No. Voltage (V) Capacity (mAh) 1 3 1.2 3 2.3 ML414S1 /F9D ML421S1 Contact Panasonic for details on available tab configurations. ML612S 2 3 2.6 ML614S 3 3 3.4 ML616S 4 3 2.9 ML621S /F9D 5 3 5.0 ML920S /F9F 6 3 11.0 ML1220 /F1A /F9D 7 3 17.0 ML1220 /V1A /F9D 8 3 17.0 ML1220 /F1B /F9D 9 3 17.0 ML2020 /V1A 10 3 45.0 ML2020 /G1A 11 3 45.0 ML2020 /H1C 12 3 45.0 1Contact Panasonic for the latest information on these models. Notes: A) To ensure proper electrical contact, it is recommended that rechargeable coin cell batteries be used with tabs for PC Board mounting. Please consult Panasonic before planning a design that will use bare coin cells without tabs (e.g. using a holder). B) Please contact Panasonic for requests on custom tab configurations. Minimum order requirements may apply. LITHIUM HANDBOOK AUGUST 2003 This information is generally descriptive only and is not intended to make or imply any representation, guarantee or warranty with respect to any cells and batteries. Cell and battery designs/specifications are subject to modification without notice. Contact Panasonic for the latest information. ML Series Tab Configurations DIMENSIONS / MM Model No. Dimensions/mm 1 Model No. Dimensions/mm 6.8 +0 -0.15 2 Max 4.8 1.55 0.15 1.65 0.5 0.2 0.15 0.05 1.5 2 0.7 Max. 1.25 0.1 0.05 Max 1.8 0.5 + 0.5 0.1 0.15 0.05 1.5 Pre-soldered Pre-soldered +0 9.5 max 12.80.5 ML920S/F9D 2.1 2.15 - + 2.6 0.45 6 6 6 MAX. 9.9 ML621S/F9D *1 2 0.7 Datum Line (Both _ and + terminals) *1: allowance: 05.mm (Difference between + terminal and _ terminal) 1.55 6.8 - 0.15 5 (2.6) (0.45) Max. 9.9 _ ML616S/F9D 0.15 0.05 2.2 0.5 1.85 0.15 2 0.5 + 2 ML614S/F9F 6.8 +0 -0.15 4 2.6 0.5 6 9.4 (0.35) 1.9 Max (6) 6.8 Max 3 2 0.5 + 0.5 0.1 2 0.5 0.45 2.6 0.5 _ ML612S/F9D 1.5 0.5 Pre-soldered (6) 2.2 0.05 1.6 0.5 ML414S/F9D Max. 9.9 Max 1.45 (3.3) 0.15 0.5 2.350.5 8 12.5 0.3 4.5 0.2 2.75 ML1220/V1A 6.25 1.5 15.25 14 ML1220/F1A 0.15 + + 1.5 0.1 _ 0.15 0.05 2.45 0.9 .75 0.1 _ 2 0.75 2 Insulation Wrap (lavender) 2 0.45 2.6 0.5 Insulation Wrap (lavender) 2.6 2.6 1 12.50.3 3.5 0.3 7 0.15 2.7max 1.5 0.5 2.05 0.5 2.00.5 3.5 0.3 1.50.7 LITHIUM HANDBOOK AUGUST 2003 This information is generally descriptive only and is not intended to make or imply any representation, guarantee or warranty with respect to any cells and batteries. Cell and battery designs/specifications are subject to modification without notice. Contact Panasonic for the latest information. ML Series Tab Configurations DIMENSIONS / MM ML2020/V1A 5 0.75 0.2 + 0.2 0.1 2.5 1 12 4 0.2 ML2020/H1C 0.75 0.2 Insulation Wrap (lavender) 20.5 1 3.0 0.6 2.7 0.3 + 0.75 0.2 20.5 1 4.7 1 ML2020/G1A 2 4 0.2 Insulation Wrap (Lavender) 20 0.3 2.7 10.2 0.5 20 0.3 2.6 0.5 0.2 0.75 1.8 4.55 0.2 0.1 1.8 0.2 1.7 0.3 0.15 0.05 3.5 0.3 11 4 2.7 0.3 3.8 0.5 Insulation Wrap (lavender) 2 2.9 200.3 2 0.75 0.1 _ 3.5 0.3 + 3.5 0.3 3 1 +0 4-1.5 ML1220/F1B 10 Insulation Wrap (lavender) 2 2.6 0.3 1.7 0.3 12.5 0.3 4.5 0.2 Dimensions/mm 21 9 Model No. 1.5 Dimensions/mm 1.5 0.5 Model No. Pre-soldered 5.08 0.7 10.16 0.2 Pre-soldered LITHIUM HANDBOOK AUGUST 2003 This information is generally descriptive only and is not intended to make or imply any representation, guarantee or warranty with respect to any cells and batteries. Cell and battery designs/specifications are subject to modification without notice. Contact Panasonic for the latest information.