Emboss Tape LEX CONNECTOR 2.5mm pitch/For LED Lamp/Disconnectable Crimp style connectors * Low profile and space saving design Mounting height at connector mounting side: 1.2mm * Secure locking mechanism * Mechanism for preventing wrong insertion * Halogen-free and RoHS compliant Specifications ------------------- Considering about luminescence property of LED package, this LEX connector is designed as low profile bottom type connector for LED lighting equipment, and achieves the space saving at the connector mounting side. In consideration of connector mating operation, secure lock and mechanism for preventing wrong insertion are provided. With the assumption that the load may be applied to the soldering part when mating the connector, the strength of soldering part after mounting the connector on PCB has been largely improved. * Current rating: 3 A AC, DC (AWG #22) * Voltage rating: 300 V AC, DC * Temperature range: -55C to +105C (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 10 m max. After environmental tests/ 20 m max. * Insulation resistance: 1,000 M min. * Withstanding voltage: 1,700 VAC/minute * Applicable wire: Conductor size/ AWG #30 to #22 Insulation O.D./ 0.7 to 1.3 mm * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. * Compliant with RoHS. Standards ---------------------- 0 Recognized E60389 1Certified LR20812 PC board layout and Assembly layout 0.05 A 1.2 Connector outline +0.1 0 2.5 0.03 +0.1 0 (2.55) (7.5) (0.25) 3.2 +0.1 0 0.10.05 3.7 +0.1 0 1.6 1.1 4x0.2 PC board edge 0.15 B +0.1 0 0.05 1.95 +0.1 0 Circuits 2 4 Note: 1. The above figure is the figure viewed from the connector mounting side. Note: 2. Tolerances are non-cumulative: 0.05 mm for all centers. The dimensions above should serve as a guideline. Contact JST for details. 1 Dimensions (mm) A B 7.5 9.0 14.0 LEX CONNECTOR Contact Model No. SSFH-001T-P0.5 SSFH-002T-P0.5 Q'ty/ reel 0.130.33 2622 0.951.3 15,000 0.050.13 3026 0.7 1.25 15,000 5.1 Material and Finish 2.2 0.5 Applicable wire AWG# Insulation O.D. (mm) mm2 2.5 1 Copper alloy, tin-plated (reflow treatment) 1.2 1.3 RoHS compliance Contact Crimping machine Crimp applicator SSFH-001T-P0.5 AP-K2N SSFH-002T-P0.5 AP-K2N MKS-L Applicator Dies MKS-L Crimp applicator with dies MK/SSFH-001-05 APLMK SSFH001-05 MK/SSFH-002-05 APLMK SSFH002-05 Housing 6.75 Model No. 2 LEXR-02V-S(HF) LEXR-04V-S(HF) 4 A Dimensions (mm) A B Circuits Q'ty/ bag - 7.0 2,000 7.5 12.0 1,000 2.5 2.9 2.35 Material Glass-filled PA 66, UL94V-0, natural I HJST A RoHS compliance B Shrouded header A 2.5 Circuits Model No. 2 EM02B-LEXSS-TF(HF) EM04B-LEXSS-TF(HF) Q'ty/ reel - 8.8 12.5 1,600 7.5 13.8 17.5 1,600 1.2 4 Dimensions (mm) A B C Material and Finish 5.1 Press pin: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Housing: PA 9T, UL94V-0, natural Solder tab: Copper alloy, copper-undercoated, tin-plated (reflow treatment) 3.5 5.55 1.4 B RoHS compliance Note: The products listed above are supplied on embossed-tape. C 2