http://www.tracopower.com Page 1 of 3
DC/DC Converters
TES 5 Series, 5 Watt
Features
◆ Compact low profile SMD package
◆ Wide 2:1 input voltage range
◆ I/O isolation 1500VDC
◆ Operating temp. range
–40°C to +85°C max.
◆ Short circuit protection
◆ Remote On/Off
◆ High accuracy of pin co-planarity
◆ Lead free design – RoHS compliant
◆ 3-years product warranty The TES-5 series is a new range of high performance 5W dc-dc converter modules
in low profile SMD package with compact dimensions of only
33.4 x 20.6 x 10.2 mm.
The 18 available models feature wide 2:1 input voltage range and tightly regulated
output voltage. High efficiency allows operating temperatures up to 71°C at full
load.
Further features are built-in EMI-filter to meet EN 55022,class A and FCC, level A
without additional components and remote On/Off control. The products are qua-
lified for soldering in a high temperature lead-free reflow solder process. Typical
applications for these converters are battery powered equipment, instrumentation,
communication systems and industrial controls.
Ordercode Input voltage range Output voltage Output current max. Efficiency typ.
TES 5-1210 3.3 VDC 1200 mA 76 %
TES 5-1211 5 VDC 1000 mA 80 %
TES 5-1212 12 VDC 420 mA 83 %
TES 5-1213 9 – 18 VDC 15 VDC 335 mA 83 %
TES 5-1221 (12 VDC nominal) ±5 VDC ±500 mA 80 %
TES 5-1222 ±12 VDC ±210 mA 83 %
TES 5-1223 ±15 VDC ±165 mA 83 %
TES 5-2410 3.3 VDC 1200 mA 78 %
TES 5-2411 5 VDC 1000 mA 82 %
TES 5-2412 12 VDC 420 mA 85 %
TES 5-2413 18 – 36 VDC 15 VDC 335 mA 85 %
TES 5-2421 (24 VDC nominal) ±5 VDC ±500 mA 82 %
TES 5-2422 ±12 VDC ±210 mA 85 %
TES 5-2423 ±15 VDC ±165 mA 85 %
TES 5-4810 3.3 VDC 1200 mA 78 %
TES 5-4811 5 VDC 1000 mA 82 %
TES 5-4812 12 VDC 420 mA 85 %
TES 5-4813 36 – 75 VDC 15 VDC 335 mA 85 %
TES 5-4821 (48 VDC nominal) ±5 VDC ±500 mA 82 %
TES 5-4822 ±12 VDC ±210 mA 85 %
TES 5-4823 ±15 VDC ±165 mA 85 %
Models
UL 60950-1
C B
Scheme
http://www.tracopower.com Page 2 of 3
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications
Input current no load 12 Vin models 20 mA
24 Vin models 5 mA
48 Vin models 3 mA
Input current full load 12 Vin models 500 mA typ.
24 Vin models 250 mA typ.
48 Vin models 125 mA typ.
Start-up voltage / 12 Vin models 8 VDC / 7 VDC typ.
under voltage shut down 24 Vin models 16 VDC / 15 VDC typ.
48 Vin models 33 VDC / 31 VDC typ.
Surge voltage (1 sec. max.) 12 Vin models 25 V max.
24 Vin models 50 V max.
48 Vin models 100 V max.
Reverse voltage protection 1.0 A max.
Conducted noise (input) EN 55022 level A, FCC part 15, class A
Output Specifications
Voltage set accuracy ±1 %
Regulation – Input variation Vin min. to Vin max. 0.3 % max.
– Load variation 20 – 100 % single output models 1 % max.
dual output models balanced load 2 % max.
Ripple and noise (20 MHz Bandwidth) 85 mVpk-pk max.
Temperature coefficient ±0.02 %/°C
Output current limitation >115 % of Iout max., constant current
Short circuit protection indefinite, automatic recovery
Capacitive load single output models 680 µF max.
dual output models 100 µF max. (each output)
General Specifications
Temperature ranges – Operating –40°C to +85°C
– Case temperature +100°C max.
– Storage –40°C to +125°C
Derating 3.5 %/K above 70°C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >1 Mio. h
Isolation voltage (60sec.) – Input/Output 1’500 VDC
Isolation capacitance – Input/Output 650 pF typ.
Isolation resistance – Input/Output (500 VDC) >1‘000 MOhm
Switching frequency 260 kHz typ.
Safety standards UL 60950-1 , IEC/EN 60950-1
Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Remote On/Off – On: 2.5 ... 5.5 VDC or open circuit
– Off: -0.7 ... 0.8 VDC
or short circuit pin 1 and 2(/3)
– Off idle current: 10 mA
DC/DC Converters
TES 5 Series 5 Watt
Page 3 of 3
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Physical Specifications
Casing material non conductive plastic
Weight 14 g (0.55oz)
Moisture sensivity level (MSL) level 2 as per J-STD-020D.1 (to find at:
www.jedec.org - free registration required)
Outline Dimensions
Pin Single Dual
1Remote On/Off Remote On/Off
2–Vin (GND) –Vin (GND)
3–Vin (GND) –Vin (GND)
9No con. Common
10 No con. No con.
11 No con. –Vout
12 No con. No con.
13 No con. No con.
14 +Vout +Vout
15 No con. No con.
16 –Vout Common
22 +Vin (Vcc) +Vin (Vcc)
23 +Vin (Vcc) +Vin (Vcc)
24 No con. No con.
Pin-Out
Pin Patterns:
DC/DC Converters
TES 5 Series 5 Watt
Rev. July 13, 2018
1
24 13
12
Seating
Plane
S
Detail A
Detail A
22.6
(0.81)
25.6
10.2
33.4
2.7
(0.11)
15.24
(0.6)
0.15
(0.006)
1.5
(0.06)
20.6
(1.31)
(0.40)
0.4
(0.016)
2.54
(0.1)
(0.89)
(1.01)
Top View
1.5
(0.06)
0.15
Dimensions in [mm], () = Inch
Tolerances ±0.25 (±0.02)
Pin pich tolerances ±0.13 (±0.005)
1.7
(0.07)
3.1
(0.12)
27.0
(1.06)
2.7
(0.11)
2 x 2.54
(2 x 0.1)
15.24
(0.6)
3 x 2.54
(3 x 0.1)
Supporting documents: www.tracopower.com/overview/tes5
