www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.003/06/13
Auxiliary Contact Block
General Characteristics:
Products : Push Buttons, Selector Switches, Latching Mushroom Head Push
Buttons, Pilot Lights & Illuminated Push Buttons
Reference Standard : IEC 60947-5-1, EN 60947-5-1, IEC 337-1
Protection Degree : IP 65/IP 66 according to IEC 60947-1; NEMA4, 4X
Pollution Degree : 3
Temperature : -40°C to +70°C (Storage)
-25°C to +70°C (Working)
Vibration Resistance : Mushroom Head Push Buttons: 8g, Other Push Buttons & Pilot Lights:
15g (40 to 500Hz) conrming to IEC 68-2-6
Shock Resistance conforming to IEC 68-2-27 : Push Buttons: 70g, Mushroom Head Push Buttons: 15g,
Selector Switches: 200g
Working Position : All Working Position are Allowed
Mechanical Life : Push Buttons & Selector Switches 1 million Operations,
Emergency Mushroom Push Buttons 300,000 Operations
Contact elements Characteristics:
Rated Thermal Current Ith : 10A
Rated Insulation Voltage Ui : 500V Conforming to NF C 20-040, VDE 0110
Operating Force : Push Buttons – 1 ‘NO’ = 10N, 1 ‘NC’ = 8N
Additional Contacts – ‘NO’ = +5N, ‘NC’ = +3N
Dielectric Strength : 2.5kV for 1 minute
Insulation Resistance : 2.5MΩ min (500V DC)
Initial Contact Resistance : ≤25mΩ
Short Circuits Protection : 10A 500V, Cartridge Fuse g1 or N Conforming to IEC 337-1
Terminal Reference : Conforming to CENELEC EN 50013
Connections : On Screw to non Losable Plate Lamp sec. 2.5mm2 max. (14AWG)
Contact Operation : Self Cleaning Type, Slow Action, Positive Opening
Operation Frequency : 3,600 Operation per hour
Utilization Category : AC 15 (DC 13)
www.element14.com
www.farnell.com
www.newark.com
Page <2> V1.003/06/13
Auxiliary Contact Block
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
AC Ratings, Inductive – NEMA A600
35% Power Factor
Volts Make
Amperes VA Break
Amperes VA
Continuous
Carrying
Amperes
Resistive 75%
Power Factor
Make, Break
& Continuous
Amperes
120 60
7,200
6
720 10 10
240 30 3
480 15 1.5
600 12 1.2
DC Ratings, NEMA Type Q600
Inductive and Resistive
Volts Make & Break
(Amp)
Continuous
(Amp)
125 0.55
2.5250 0.27
600 0.1
Rated Power DC Supply
Conforming to IEC 60947-5-1 Power Broken in Watts
Load Factor: 0.5 for 1 million Operations
AC Supply (50/60Hz) Voltage 24V 48V 120V
Inductive Load 65W 48W 40W
Description Part Number
Contact Block, 1NO RB2-BE101.
Contact Block, 1NC RB2-BE102-BP
22mm Switches N/C Block RB2-BE102
22mm Switches N/O Block RB2-BE101-BP
Part Number Table
