18-038/RSGHBHC1-S03/2T - EVERLIGHT ELECTRONICS

LifecyclePhase:

Revision : 5

Expired Period: Forever

Release Date:2013-08-23 13:15:42.0

SMD 

18-038/RSGHBHC1-S03/2T

Features

Package in 8mm tape on 7〞diameter reel

Compatible with automatic placement equipment

Compatible with infrared and vapor phase reflow

Solder process

Full-color type

Pb-free

Component solderable surface finish is Gold

Component weight is 1.0 mg

RoHS compliant

Description

The 18-038 SMD LED is much smaller than lead frame type components, thus enable

smaller board size, higher packing density, reduced storage space and finally smaller equipment to

be obtained.

Moreover, with its black PCB, the 18-038 possess an ideal solution for high-contract and

high

-resolution indoor signage display.

Applications

Indoor signage display applications

Indoor decorating and entertainment design

Flat backlight for LCD, switch and symbol

Indicator and backlighting for all consumer electronics

LifecyclePhase:

Revision : 5

Expired Period: Forever

Release Date:2013-08-23 13:15:42.0

DATASHEET

SMD

18-038/RSGHBHC1-S03/2T

Device Selection Guide

Chip Materials Emitted Color Resin Color

AlGaInP Brilliant Red

InGaN Brilliant Green Water Clear

InGaN Brilliant Blue

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Unit

Reverse Voltage VR5V

Forward Current IF

RS:25

GH:20

BH:20

Peak Forward Current

(Duty 1/10 @1KHz) IFP

RS:60

GH:50

BH:50

Power Dissipation Pd

RS:60

GH:70

BH:70

Junction Temperature Tj100 ℃

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40 ~ +90 ℃

ESD

(Classification acc. AEC

Q101)

ESDHBM

R:2000

G:150

B:150

Soldering Temperature Tsol

Reflow Soldering : 260 ℃ for 10 sec.

Hand Soldering : 350 ℃ for 3 sec.

LifecyclePhase:

Revision : 5

Expired Period: Forever

Release Date:2013-08-23 13:15:42.0

DATASHEET

SMD

18-038/RSGHBHC1-S03/2T

Electro-Optical Characteristics (Ta=25℃)

Parameter

Symbol

Min. Typ. Max. Unit Condition

RS 75.0 ----- 226.0

GH 160.0 ----- 398.0

Luminous Intensity Iv

BH 40.0 ----- 144.0

mcd IF=20mA

Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA

RS 632

GH 518

Peak Wavelength Λp

-----

468

----- nm IF=20mA

RS 619.0 631.0

GH 519.0 531.0

Dominant Wavelength Λd

BH 462.0

-----

475.0

nm IF=20mA

RS 20

GH 25

Spectrum Radiation

Bandwidth Δλ

-----

----- nm IF=20mA

RS 1.7 2.0 2.35

GH 2.7 3.3 3.7

Forward Voltage VF

BH 2.7 3.3 3.7

V IF=20mA

Reverse Current IR----- ----- 10 μA VR=5V

Note:

1. Tolerance of Luminous Intensity: ±10%

2. Tolerance of Dominant Wavelength: ±1nm

3. Tolerance of Forward Voltage: ±0.1V

LifecyclePhase:

Revision : 5

Expired Period: Forever

Release Date:2013-08-23 13:15:42.0

DATASHEET

SMD

18-038/RSGHBHC1-S03/2T

Floating Bin(RS)

Bin Range of Luminous Intensity

Bin Code Min. Max. Unit Condition

RA 75 90

RB 90 108

RC 108 130

RD 130 156

RE 156 188

RF 188 226

mcd IF =20mA

Bin Range of Dominant Wavelength

Bin Code Min. Max. Unit Condition

R1 619.0 622.0

R2 622.0 625.0

R3 625.0 628.0

R4 628.0 631.0

nm IF =20mA

Bin Range of Dominant Voltage

Bin Code Min. Max. Unit Condition

R1 1.7 2.35 v IF =20mA

Note:

1.Tolerance of Luminous Intensity: ±10%

2.Tolerance of Dominant Wavelength: ±1nm

3. Tolerance of Forward Voltage: ±0.1V

LifecyclePhase:

Revision : 5

Expired Period: Forever

Release Date:2013-08-23 13:15:42.0

DATASHEET

SMD

18-038/RSGHBHC1-S03/2T

Floating Bin(GH)

Bin Range of Luminous Intensity

Bin Code Min. Max. Unit Condition

GA 160 192

GB 192 230

GC 230 276

GD 276 332

GE 332 398

mcd IF =20mA

Bin Range of Dominant Wavelength

Bin Code Min. Max. Unit Condition

G1 519.0 522.0

G2 522.0 525.0

G3 525.0 528.0

G4 528.0 531.0

nm IF =20mA

Bin Range of Dominant Voltage

Bin Code Min. Max. Unit Condition

G1 2.7 3.7 v IF =20mA

Note:

1.Tolerance of Luminous Intensity: ±10%

2.Tolerance of Dominant Wavelength: ±1nm

3. Tolerance of Forward Voltage: ±0.1V

LifecyclePhase:

Revision : 5

Expired Period: Forever

Release Date:2013-08-23 13:15:42.0

DATASHEET

SMD

18-038/RSGHBHC1-S03/2T

Floating Bin(BH)

Bin Range of Luminous Intensity

Bin Code Min. Max. Unit Condition

BA 40 58

BB 58 70

BC 70 84

BD 84 100

BE 100 120

BF 120 144

mcd IF =20mA

Bin Range of Dominant Wavelength

Bin Code Min. Max. Unit Condition

B1 462.0 465.0

B2 465.0 468.0

B3 468.0 471.0

B4 471.0 474.0

B5 474.0 475.0

nm IF =20mA

Bin Range of Dominant Voltage

Bin Code Min. Max. Unit Condition

B1 2.7 3.7 v IF =20mA

Note:

1.Tolerance of Luminous Intensity: ±10%

2.Tolerance of Dominant Wavelength: ±1nm

3. Tolerance of Forward Voltage: ±0.1V

LifecyclePhase:

Revision : 5

Expired Period: Forever

Release Date:2013-08-23 13:15:42.0

DATASHEET

SMD

18-038/RSGHBHC1-S03/2T

Typical Electro-Optical Characteristics Curves

Radiation Diagram Ta=25°C

80°

0.20.5 0.10.3

90°

0.4 0.6

10°

0.7

0.8

1.0

0.9

0°

50°

70°

60°

40°

30°

20°

100 Ta=25°C

Relative luminous intensity (%)

Wavelength λ (nm)

Spectrum Distribution

400 550

450 500 600 650 700

RED

GREEN

BLUE

Forward Voltage V (V)

Forward Current I (mA)

Forward Voltage

Ta=25°C

Forward Current vs.

2.8

2.0

1.6 2.4 4.23.43.0 3.8

RED GREEN

BLUE

Forward Current Derating Curve

Forward Current I (mA)

20 60 10080

Relative luminous intensity

RED

GREEN

BLUE

Ambient Temperature vs.

Ambient Temperature Ta (°C)

Total Power Dissipation

100

150

(mW)

200

250

20 60 10085

Total Power Dissipation

Ambient Temperature Ta (°C)

Total Power Dissipation

100

150

(mW)

200

250

20 60 10085

RED

GREEN

BLUE

Ambient Temperature vs.

Power Dissipation

LifecyclePhase:

Revision : 5

Expired Period: Forever

Release Date:2013-08-23 13:15:42.0

DATASHEET

SMD

18-038/RSGHBHC1-S03/2T

Package Dimension

Note: Tolerances unless mentioned ±0.1mm. Unit = mm

LifecyclePhase:

Revision : 5

Expired Period: Forever

Release Date:2013-08-23 13:15:42.0

DATASHEET

SMD

18-038/RSGHBHC1-S03/2T

Moisture Resistant Packing Materials

Label Explanation

‧CPN: Customer’s Product Number

P/N: Product Number

‧

QTY: Packing Quantity‧

CAT: Luminous Intensity Rank‧

HUE: Dom. Wavelength Rank‧

REF: Forward Voltage Rank‧

LOT No:‧Lot Number

Reel Dimensions

LifecyclePhase:

Revision : 5

Expired Period: Forever

Release Date:2013-08-23 13:15:42.0

DATASHEET

SMD

18-038/RSGHBHC1-S03/2T

Carrier Tape Dimensions:

Minimum packing amount is 2000 pcs per reel

Note: Tolerances unless mentioned ±0.1mm. Unit = mm

Moisture Resistant Packing Process

Aluminum moistue-proof bag LabelDesiccant

Label

Note: Tolerances unless mentioned ±0.1mm. Unit = mm

LifecyclePhase:

Revision : 5

Expired Period: Forever

Release Date:2013-08-23 13:15:42.0

DATASHEET

SMD

18-038/RSGHBHC1-S03/2T

Precautions for Use

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will cause big current

change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 168Hrs under 30℃ or less and 60% RH or

less.If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

Pre-heating

150~200°C

60~120sec.

3°C/sec.Max.

Above 217°C

60~150sec.

260°C Max.

10sec. Max.

6°C/sec.Max.

Above255°C

30sec.Max.

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals,

and do soldering of each terminal. Be careful because the damage of the product is often started

at the time of the hand solder.

LifecyclePhase:

Revision : 5

Expired Period: Forever

Release Date:2013-08-23 13:15:42.0

DATASHEET

SMD

18-038/RSGHBHC1-S03/2T

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable,

a double-head soldering iron should be used (as below figure). It should be confirmed beforehand

whether the characteristics of the LEDs will or will not be damaged by repairing.

6.Directions for use

The LEDs should be operated with forward bias. The driving circuit must be designed so that

the LEDs are not subjected to forward or reverse voltage while it is off. If reverse voltage is

continuously applied to the LEDs, It may cause migration resulting in LED damage.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2685-6688

Office: No 6-8, Zhonghua Rd., Shulin Dist., Fax: 886-2-2685-6699

New Taipei City 23860, Taiwan, R.O.C http://www.everlight.com