MCP Indoor Call Point Range
MCP1 - Resistor & Clean Contact Model (Red Versions)
Product Benefits
• Unique 'Plug & Play' installation concept
• Total 'Flex-Ability' in the choice of
operating element
• Anti-Tamper facility
• Enhanced aesthetics
• Fully approved to the latest standards
• Backward compatibility
Product Overview
Installation efficiency, flexibility and full compliance with the latest standards are at the heart of the
new MCP Indoor Call Point range.
Installation time and ultimately cost, are of paramount importance to any fire or security installer. The
MCP range directly reflects this need by providing a unique 'plug and play' concept designed
specifically to reduce installation time. All new MCP products utilise a special terminal block, where
all initial installation cabling is terminated. This terminal block is then simply connected to the back
of the MCP. Simple, but effective with no re-termination required and no time wasted.
Through new standards and legislation, both break glass and re-settable operating elements can now
be used within a manual call point. To provide you with the greatest 'flex-ability', the new MCP range
can be configured as either a break glass or re-settable unit by simply changing from one element to
another. No other additional parts or alternative products need to be ordered.
All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal
removal of the product lid will result in the call point operating and the system going in to alarm.
Full compliance with the latest standards is essential and the new MCP indoor call point range is fully
approved to the latest EN54-11 standard.
The MCP1A product version is supplied with both a resistor and normally open clean contact electrical
options. These options are easily utilised by simply connecting the terminal block to the required
connection in the back of the MCP1 product. A variety of resistor versions are available, with both
470Ωand 680Ωoffered as standard. However, other resistor types can be provided upon request.
The MCP1B product version allows for connection to 'Savwire' systems.
PRODUCT DATASHEET
Product Approvals
Pending
166b/39 & 166b/40
Electrical Specification
Connection Details: See Figure .1
Max: 30VDC
Cable Termination: 0.5-2.5mm2
Environmental Specification
Humidity: 0-95% non-condensing
Operating Temperature: -400C to +550C
Storage Temperature: -400C to +550C
Ingress Protection (IP) Rating: IP24D
Mechanical Specification
Material: PC/ABS
Weight: 110g Flush/160g Surface
Colour: Red, Ral 3001
Ordering Information
Model Electrical Configuration Operating Mounting Markings
Element
Stock
MUS1A-R470FG-01 470Ohm Resistor & N\O 24VDC Glass Flush EN54-11
MUS1A-R470FF-01 470Ohm Resistor & N\O 24VDC Flexible Flush EN54-11
MUS1A-R680FG-01 680Ohm Resistor & N\O 24VDC Glass Flush EN54-11
MUS1A-R470SG-01 470Ohm Resistor & N\O 24VDC Glass Surface EN54-11
MUS1A-R470SF-01 470Ohm Resistor & N\O 24VDC Flexible Surface EN54-11
MUS1A-R680SG-01 680Ohm Resistor & N\O 24VDC Glass Surface EN54-11
MUS1B-R470SG01 470Ohm Resistor & N\O 24VDC (Savwire) Glass Surface EN54-11
Non-Stock
MCP1A-R680FF-01 680Ohm Resistor & N\O 24VDC Flexible Flush EN54-11
MCP1B-R470FG-01 470Ohm Resistor & N\O 24VDC (Savwire) Glass Flush EN54-11
MCP1B-R470FF-01 470Ohm Resistor & N\O 24VDC (Savwire) Flexible Flush EN54-11
MCP1A-R680SF-01 680Ohm Resistor & N\O 24VDC Flexible Surface EN54-11
MCP1B-R470FG-01 470Ohm Resistor & N\O 24VDC (Savwire) Glass Surface EN54-11
MCP1B-R470FF-01 470Ohm Resistor & N\O 24VDC (Savwire) Flexible Surface EN54-11
N\O = Normally Open Contact
Accessories
Code Description
SC070 Pack Of Ten Test Keys
KG1 x 5 Pack Of five Glass Elements
PS210 Flexible Operating Element
PS200 Plain Hinged Cover
SC071 Pack Of Ten Terminal Blocks
Document Ref.
LIT:MCP1
Rev. No. 01
E. & O.E.
KAC Alarm Company Limited,
15-19 Trescott Road, Smallwood,
Redditch, England B98 7AH.
T: +44 (0) 1527 406655,
F: +44 (0) 1527 406677,
E: sales@kac.co.uk
W: www.kac.co.uk
PRODUCT DATASHEET
MUS1A-R MCP1B-X
Figure .1