39D
www.vishay.com Vishay Sprague
Revision: 29-Sep-16 1Document Number: 42036
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Aluminum Capacitors
+85 °C, Powerlytic™ Electrolytics
FEATURES
• Designed for applications requiring greatest
possible capacitance in small physical case
sizes
• Supplement original Type 36D can-type capacitors,
offering lower capacitance values in smaller sizes with
axial leads
• Welds at all critical anode and cathode terminals eliminate
riveted or pressure connections to assure freedom from
open circuits even when operated in the microvolt or
millivolt signal range
• Improved molded phenolic and seals
• Pressure-sensitive safety vent
• Service life of 10 years or more in normal circuit
applications
• Capacitors listed have outer plastic-film insulation. For
bare case, change last character of part number from
6 to 0 and subtract 0.062" [1.575 mm] from diameter and
0.125" [3.175 mm] from length
• Axial lead
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DIMENSIONS AND AVAILABLE FORMS
QUICK REFERENCE DATA
DESCRIPTION VALUE
Operating temperature -20 °C to +85 °C
Tolerance on CR:
3 WVDC to 75 WVDC
100 WVDC to 450 WVDC
+75 %, -10 %
+50 %, -10 %
Dissipation Factor:
3 WVDC and 6 WVDC 230 %
10 WVDC and 15 WVDC 150 %
25 WVDC and 30 WVDC 60 %
40 WVDC and 50 WVDC 45 %
75 WVDC and 100 WVDC 30 %
150 WVDC to 450 WVDC 18 %
Ripple current
20 to 3140 maximum amperes rms at
120 Hz and +85 °C, depending upon
capacitance
Useful life at 85 °C 500 h
DC leakage current
(after 5 min charge)
k = 6.0 at +25 °C;
k = 36.0 at +85 °C
I in μA, C in μF, V in Volts
Available
DIMENSIONS in inches [millimeters]
CASE
CODE
DL
CASE
CODE
DL
CASE
CODE
DL
± 0.020 [0.51] ± 0.062 [1.58] ± 0.020 [0.51] ± 0.062 [1.58] ± 0.020 [0.51] ± 0.062 [1.58]
EE 0.510 [13.0] 1.141 [29.0] GJ 0.760 [19.3] 1.641 [41.7] JE 1.010 [25.7] 1.141 [29.0]
EJ 0.510 [13.0] 1.641 [41.7] GL 0.760 [19.3] 2.141 [54.4] JJ 1.010 [25.7] 1.641 [41.7]
EL 0.510 [13.0] 2.141 [54.4] GP 0.760 [19.3] 2.641 [67.1] JL 1.010 [25.7] 2.141 [54.4]
FE 0.635 [16.1] 1.141 [29.0] HE 0.885 [22.5] 1.141 [29.0] JP 1.010 [25.7] 2.641 [67.1]
FJ 0.635 [16.1] 1.641 [41.7] HJ 0.885 [22.5] 1.641 [41.7] JS 1.010 [25.7] 3.141 [79.8]
FL 0.635 [16.1] 2.141 [54.4] HL 0.885 [22.5] 2.141 [54.4] JT 1.010 [25.7] 3.641 [92.5]
FP 0.635 [16.1] 2.641 [67.1] HP 0.885 [22.5] 2.641 [67.1] - - -
GE 0.760 [19.3] 1.141 [29.0] HS 0.885 [22.5] 3.141 [79.8] - - -
Tinned copper leads
No. 20 AWG (0.032" [0.813] Dia.) for D = 0.510" [13.0] and D = 0.635" [16.1]
No. 18 AWG (0.040" [1.016] Dia.) for D = 0.760" [19.3] and up
L
PVC sleeve
2.50
[63.50]
min.
D
C
L
2.50
[63.50]
min.