SMCJ130CA - Bourns - Pdf.Support

Features

■ RoHS compliant*

■ Surface Mount SMC package

■ Standoff Voltage: 5.0 to 170 volts

■ Power Dissipation: 1500 watts

Applications

■ IEC 61000-4-2 ESD (Min. Level 4)

■ IEC 61000-4-4 EFT

■ IEC 61000-4-5 Surge

Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)

SMCJ Transient Voltage Suppressor Diode Series

*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.

Speciﬁ cations are subject to change without notice.

Customers should verify actual device performance in their speciﬁ c applications.

Parameter Symbol Value Unit

Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 1500 Watts

Peak Forward Surge Current

8.3 ms Single Half Sine Wave Superimposed on Rated Load

(JEDEC Method) (Note 3)

IFSM 200 Amps

Steady State Power Dissipation @ TL = 75 °C PM(AV) 5.0 Watts

Maximum Instantaneous Forward Voltage @ IPP = 100 A

(For Unidirectional Units Only) VF(Note 5) Volts

Operating Temperature Range TJ-55 to +150 °C

Storage Temperature Range TSTG -55 to +175 °C

1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve.

2. Thermal Resistance Junction to Lead.

3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).

4. Single Phase, Half Wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20 %.

5. VF = 3.5 V on SMCJ5.0A through SMCJ90A and VF= 5.0 V on SMCJ100A through SMCJ170A.

General Information

The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop

increasingly smaller electronic components.

Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC)

size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 170 V and Breakdown

Voltage up to 200 V. Typical fast response times are less than 1.0 ns for unidirectional devices and less than 5.0 ns for bidirectional devices

from 0 V to Minimum Breakdown Voltage.

Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the ﬂ at conﬁ guration

minimizes roll away.

How to Order

SMCJ 5.0 CA

Package

SMCJ = SMC/DO-214AB

Working Peak Reverse Voltage

5.0 = 5.0 VRWM (Volts)

Sufﬁ x

A = 5 % Tolerance Unidirectional Device

CA = 5 % Tolerance Bidirectional Device

*RoHS COMPLIANT

Asia-Paciﬁ c:

Tel: +886-2 2562-4117

Fax: +886-2 2562-4116

Europe:

Tel: +41-41 768 5555

Fax: +41-41 768 5510

The Americas:

Tel: +1-951 781-5500

Fax: +1-951 781-5700

www.bourns.com

Speciﬁ cations are subject to change without notice.

Customers should verify actual device performance in their speciﬁ c applications.

SMCJ Transient Voltage Suppressor Diode Series

Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)

Notes:

1. Sufﬁ x ‘A’ denotes a 5 % tolerance unidirectional device. 3. For bidirectional devices with a VR of 10 volts or less, the IR limit is double.

2. Sufﬁ x ‘CA’ denotes a 5 % tolerance bidirectional device. 4. For unidirectional devices with a VF max. of 3.5 V at an IF of 35 A, 0.5 Sine

Wave of 8.3 ms Pulse Width.

Unidirectional Device Bidirectional Device Breakdown Voltage

VBR (Volts)

Working

Peak

Reverse

Voltage

Maximum

Reverse

Leakage

@ VRWM

Maximum

Reverse

Voltage

@ IRSM

Maximum

Reverse

Surge

Current

Part

Number

Part

Marking

Part

Number

Part

Marking Min. Max. @ IT (mA) VRWM

(Volts) IR (μA) VRSM (Volts) IRSM (Amps)

SMCJ5.0A GDE SMCJ5.0CA BDE 6.40 7.00 10 5 1000 9.2 163

SMCJ6.0A GDG SMCJ6.0CA BDG 6.67 7.37 10 6 1000 10.3 145.6

SMCJ6.5A GDK SMCJ6.5CA BDK 7.22 7.98 10 6.5 500 11.2 133.9

SMCJ7.0A GDM SMCJ7.0CA BDM 7.78 8.60 10 7 200 12 125

SMCJ7.5A GDP SMCJ7.5CA BDP 8.33 9.21 1 7.5 100 12.9 116.3

SMCJ8.0A GDR SMCJ8.0CA BDR 8.89 9.83 1 8 50 13.6 110.3

SMCJ8.5A GDT SMCJ8.5CA BDT 9.44 10.4 1 8.5 20 14.4 104.2

SMCJ9.0A GDV SMCJ9.0CA BDV 10.0 11.1 1 9 10 15.4 97.4

SMCJ10A GDX SMCJ10CA BDX 11.1 12.3 1 10 5 17 88.2

SMCJ11A GDZ SMCJ11CA BDZ 12.2 13.5 1 11 5 18.2 82.4

SMCJ12A GEE SMCJ12CA BEE 13.3 14.7 1 12 5 19.9 75.3

SMCJ13A GEG SMCJ13CA BEG 14.4 15.9 1 13 5 21.5 69.7

SMCJ14A GEK SMCJ14CA BEK 15.6 17.2 1 14 5 23.2 64.7

SMCJ15A GEM SMCJ15CA BEM 16.7 18.5 1 15 5 24.4 61.5

SMCJ16A GEP SMCJ16CA BEP 17.8 19.7 1 16 5 26 57.7

SMCJ17A GER SMCJ17CA BER 18.9 20.9 1 17 5 27.6 53.3

SMCJ18A GET SMCJ18CA BET 20.0 22.1 1 18 5 29.2 51.4

SMCJ20A GEV SMCJ20CA BEV 22.2 24.5 1 20 5 32.4 46.3

SMCJ22A GEX SMCJ22CA BEX 24.4 26.9 1 22 5 35.5 42.2

SMCJ24A GEZ SMCJ24CA BEZ 26.7 29.5 1 24 5 38.9 38.6

SMCJ26A GFE SMCJ26CA BFE 28.9 31.9 1 26 5 42.1 35.6

SMCJ28A GFG SMCJ28CA BFG 31.1 34.4 1 28 5 45.4 33

SMCJ30A GFK SMCJ30CA BFK 33.3 36.8 1 30 5 48.4 31

SMCJ33A GFM SMCJ33CA BFM 36.7 40.6 1 33 5 53.3 28.1

SMCJ36A GFP SMCJ36CA BFP 40 44.2 1 36 5 58.1 25.8

SMCJ40A GFR SMCJ40CA BFR 44.4 49.1 1 40 5 64.5 23.3

SMCJ43A GFT SMCJ43CA BFT 47.8 52.8 1 43 5 69.4 21.6

SMCJ45A GFV SMCJ45CA BFV 50 55.3 1 45 5 72.7 20.6

SMCJ48A GFX SMCJ48CA BFX 53.3 58.9 1 48 5 77.4 19.4

SMCJ51A GFZ SMCJ51CA BFZ 56.7 62.7 1 51 5 82.4 18.2

SMCJ54A GGE SMCJ54CA BGE 60 66.3 1 54 5 87.1 17.2

SMCJ58A GGG SMCJ58CA BGG 64.4 71.2 1 58 5 93.6 16

SMCJ60A GGK SMCJ60CA BGK 66.7 73.7 1 60 5 96.8 15.5

SMCJ64A GGM SMCJ64CA BGM 71.1 78.6 1 64 5 103 14.6

SMCJ70A GGP SMCJ70CA BGP 77.8 86.0 1 70 5 113 13.3

SMCJ75A GGR SMCJ75CA BGR 83.3 92.1 1 75 5 121 12.4

SMCJ78A GGT SMCJ78CA BGT 86.7 95.8 1 78 5 126 11.4

SMCJ85A GGV SMCJ85CA BGV 94.4 104 1 85 5 137 10.4

SMCJ90A GGX SMCJ90CA BGX 100 111 1 90 5 146 10.3

SMCJ100A GGZ SMCJ100CA BGZ 111 123 1 100 5 162 9.3

SMCJ110A GHE SMCJ110CA BHE 122 135 1 110 5 177 8.4

SMCJ120A GHG SMCJ120CA BHG 133 147 1 120 5 193 7.9

SMCJ130A GHK SMCJ130CA BHK 144 159 1 130 5 209 7.2

SMCJ150A GHM SMCJ150CA BHM 167 185 1 150 5 243 6.2

SMCJ160A GHP SMCJ160CA BHP 178 197 1 160 5 259 5.8

SMCJ170A GHR SMCJ170CA BHR 189 209 1 170 5 275 5.5

Product Dimensions

Speciﬁ cations are subject to change without notice.

Customers should verify actual device performance in their speciﬁ c applications.

SMCJ Transient Voltage Suppressor Diode Series

Recommended Footprint

Physical Speciﬁ cations

Case ...........................................Molded plastic per UL Class 94V-0

Polarity....................... Cathode band indicates unidirectional device

No cathode band indicates bidirectional device

Weight ....................................................0.007 ounces / 0.21 grams

DIMENSIONS: MM

(INCHES)

F D

Dimension SMC (DO-214AB)

A6.60 - 7.11

(0.260 - 0.280)

B5.59 - 6.22

(0.220 - 0.245)

C2.92 - 3.18

(0.115 - 0.125)

D0.15 - 0.31

(0.006 - 0.112)

E7.75 - 8.13

(0.305 - 0.320)

F 0.05 - 0.20

(0.002 - 0.008)

G 2.01 - 2.62

(0.080 - 0.103)

H 0.76 - 1.52

(0.030 - 0.060)

DIMENSIONS: MM

(INCHES)

Dimension SMC (DO-214AB)

A (Max.) 4.69

(0.185)

B (Min.) 3.07

(0.121)

C (Min.) 1.52

(0.060)

Speciﬁ cations are subject to change without notice.

Customers should verify actual device performance in their speciﬁ c applications.

SMCJ Transient Voltage Suppressor Diode Series

Rating & Characteristic Curves

Pulse Derating Curve Maximum Non-Repetitive Surge Current

Pulse Waveform Typical Junction Capacitance

Pulse Rating Curve Steady State Power Derating Curve

100

050

25 75 100 150125 175 200

Ambient Temperature (

Peak Pulse Derating in Percent of

Peak Power or Current

°C)

10 x 1000 Waveform as Defined

by R.E.A.

Peak Forward Surge Current (Amps)

100

200

1 2 5 10 20 50 100

Number of Cycles at 60 Hz

Pulse Width 8.3 ms

Single Half Sine-Wave

(JEDEC Method)

100

0 1.0 2.0 3.0 4.0

T, Time (ms)

IP, Peak Pulse Current (%)

TA=25 °C

TR=10 µs

Half value= IRSM

Peak value (IRSM)

Pulse width (TP)

is defined as that point

where the peak current

decays to 50 % of IPSM.

10 x 1000 waveform

as defined by R.E.A.

Capacitance (pF)

10000

100

010 100 1000

Standoff Voltage (Volts)

1000

Bidirectional

TA = 25 °C

Unidirectional

5.0

3.0

4.0

2.0

1.0

0.0

050

25 75 100 150125 175 200

TL, Lead Temperature (°C)

RM(AV) Steady State Power Dissipation (W)

60 Hz Resistive or

Inductive Load

100

1.0

0.1

0.1 µs 1.0 µs 10 µs 10 ms

TP, Pulse Width

PP, Peak Power (KW)

100 µs 1.0 ms

5.0 mm Lead Areas

TA = 25 °C

Non-repetitive Pulse Waveform

Shown in Pulse Waveform Graph

CDDFN5-0504N - TVS/Steering Diode Array

Packaging Information

.......

....... ..............

120 °

Index Hole

10 pitches (min.)

Direction of Feed

10 pitches (min.)

End

Trailer Device Leader

Start

The product will be dispensed in tape and reel format (see diagram below).

Devices are packed in accordance with EIA standard

RS-481-A and speciﬁ cations shown here.

DIMENSIONS: MM

(INCHES)

Item Symbol SMC (DO-214AB)

Carrier Width A 7.22 ± 0.10

(0.284 - 0.004)

Carrier Length B 8.11 ± 0.10

(0.319 ± 0.004)

Carrier Depth C 2.36 ± 0.10

(0.093 ± 0.004)

Sprocket Hole d 1.55 ± 0.05

(0.061 ± 0.002)

Reel Outside Diameter D 330

(12.992)

Reel Inner Diameter D1 50.0

(1.969) MIN.

Feed Hole Diameter D2 13.0 ± 0.20

(0.512 ± 0.008)

Sprocket Hole Position E 1.75 ± 0.10

(0.069 ± 0.004)

Punch Hole Position F 7.50 ± 0.05

(0.295 ± 0.002)

Punch Hole Pitch P 4.00 ± 0.10

(0.157 ± 0.004)

Sprocket Hole Pitch P0 4.00 ± 0.10

(0.157 ± 0.004)

Embossment Center P1 2.00 ± 0.05

(0.079 ± 0.002)

Overall Tape Thickness T 0.30 ± 0.10

(0.012 ± 0.004)

Tape Width W 16.00 ± 0.20

(0.630 ± 0.008)

Reel Width W122.4

(0.882) MAX.

Quantity per Reel -- 3,000

REV. 08/12

Speciﬁ cations are subject to change without notice.

Customers should verify actual device performance in their speciﬁ c applications.

SMCJ Transient Voltage Suppressor Diode Series