TVS Diodes
©2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 06/10/19
Surface Mount – 5000W > 5.0SMDJ series
AGENCY AGENCY FILE NUMBER
E230531
The 8.0SMDJ series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
TVS components are ideal for the protection of I/O
Interfaces, VCC bus and other vulnerable circuits used in
Telecom, Computer, Industrial and Consumer electronic
applications.
Applications
Features
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Agency Recognitions
• For surface mounted
applications to optimize
board space
• Low profile package
• Typical failure mode is
short from over-specified
voltage or current
• Whisker test is conducted
based on JEDEC
JESD201A per its table 4a
and 4c
• IEC-61000-4-2 ESD
30kV(Air), 30kV (Contact)
• ESD protection of data
lines in accordance with
IEC 61000-4-2
• EFT protection of data
lines in accordance with
IEC 61000-4-4
• Built-in strain relief
• Glass passivated chip
junction
• 8kW peak pulse power
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
• Fast response time:
typically less than 1.0ps
from 0V to VBR min
• Excellent clamping
capability
• compact size with high
power density in DO-
214AB Package
• Low incremental surge
resistance
• Typical IR less than 5μA
when VBR min>22V
• High temperature reflow
soldering guaranteed:
260°C/40sec
• VBR @ TJ= VBR@25°C
x (1+αT x (TJ - 25))
(αT:Temperature
Coefficient, typical value
is 0.1%)
• UL Recognized compound
meeting flammability
rating V-0
• Meet MSL level1, per
J-STD-020, LF maximun
peak of 260°C
• Matte tin lead–free plated
• Halogen free and RoHS
compliant
• Pb-free E3 means 2nd level
interconnect is Pb-free
and the terminal finish
material is tin(Sn) (IPC/
JEDEC J-STD-609A.01)
Parameter Symbol Value Unit
Peak Pulse Power Dissipation at
TL=25OC by 10/1000μs Waveform
(Fig.2)(Note 1), (Note 2) PPPM 8000 W
Power Dissipation on Infinite Heat
Sink at TL=50OCPD6.5 W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3) IFSM 300 A
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
Only VF5.0 V
Operating Temperature Range TJ-65 to 150 °C
Storage Temperature Range TSTG -65 to 175 °C
Typical Thermal Resistance Junction
to Lead RθJL 15 °C/W
Typical Thermal Resistance Junction
to Ambient RθJA 75 °C/W
Notes:
1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3.
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
component only,duty cycle=4 per minute maximum.
Description
8.0SMDJ Series
Functional Diagram
Bi-directional
Uni-directional
Cathode Anode
Uni-directional
Bi-directional
RoHS
Pb
e3
8000W > 8.0SMDJ series
TVS Diodes
©2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 06/10/19
Surface Mount – 5000W > 5.0SMDJ series
Electrical Characteristics (TA=25°C unless otherwise noted)
For bidirectional type having VR of 20 volts and less, the IR limit is double.
8000W > 8.0SMDJ series
Part
Number
(Uni)
Part
Number
(Bi)
Marking
Reverse
Stand off
Voltage
VR
(Volts)
Breakdown
Voltage VBR
(Volts) @ IT
Test
Current
IT
(mA)
Maximum
Clamping
Voltage VC
@ Ipp
(10/1000μs
)
(V)
Maximum
Peak Pulse
Current Ipp
(10/1000μs)
(A)
Maximum
Clamping
Voltage VC
@ Ipp
(8/20μs)
(V)
Maximum
Peak Pulse
Current Ipp
(8/20μs)
(A)
Maximum
Reverse
Leakage IR
@ VR
(µA)
Agency
Approval
UNI BI MIN MAX
8.0SMDJ12A 8.0SMDJ12CA 8PEP 8BEP 12 13.3 14.7 10 19.9 402.1 25.7 2613.7 800 X
8.0SMDJ13A 8.0SMDJ13CA 8PEQ 8BEQ 13 14.4 15.9 10 21.5 372.1 27.8 2418.7 500 X
8.0SMDJ14A 8.0SMDJ14CA 8PER 8BER 14 15.6 17. 2 10 23.2 344.9 30.0 2241.9 200 X
8.0SMDJ15A 8.0SMDJ15CA 8PES 8BES 15 16.7 18.5 1 24.4 327.9 31.5 2131.4 100 X
8.0SMDJ16A 8.0SMDJ16CA 8PET 8BET 16 1 7. 8 19.7 1 26.0 307.7 33.6 2000.1 50 X
8.0SMDJ17A 8.0SMDJ17CA 8PEU 8BEU 17 18.9 20.9 1 27.6 290.0 35.7 1885.0 20 X
8.0SMDJ18A 8.0SMDJ18CA 8PEV 8BEV 18 20.0 22.1 1 29.2 274.0 37.7 1781.0 10 X
8.0SMDJ20A 8.0SMDJ20CA 8PEW 8BEW 20 22.2 24.5 1 32.4 247.0 41.9 1605.5 5 X
8.0SMDJ22A 8.0SMDJ22CA 8PEX 8BEX 22 24.4 26.9 1 35.5 225.4 45.9 1464.8 5 X
8.0SMDJ24A 8.0SMDJ24CA 8PEZ 8BEZ 24 26.7 29.5 1 38.9 205.7 50.3 1336.8 5 X
8.0SMDJ26A 8.0SMDJ26CA 8PFE 8BFE 26 28.9 31.9 1 42.1 190.1 54.4 1235.7 5 X
8.0SMDJ28A 8.0SMDJ28CA 8PFG 8BFG 28 31.1 34.4 1 45.4 176.2 58.7 1145.4 5 X
8.0SMDJ30A 8.0SMDJ30CA 8PFK 8BFK 30 33.3 36.8 1 48.4 165.3 62.5 1074.5 5 X
8.0SMDJ33A 8.0SMDJ33CA 8PFM 8BFM 33 36.7 40.6 1 53.3 150.1 68.9 975.7 5 X
8.0SMDJ36A 8.0SMDJ36CA 8PFP 8BFP 36 40.0 44.2 1 58.1 137.8 75.1 895.7 5 X
8.0SMDJ40A 8.0SMDJ40CA 8PFR 8BFR 40 44.4 49.1 1 64.5 124.1 83.3 806.7 5 X
8.0SMDJ43A 8.0SMDJ43CA 8PFT 8BFT 43 47.8 52.8 1 69.4 115.3 89.7 749.5 5 X
8.0SMDJ45A 8.0SMDJ45CA 8PFV 8BFV 45 50.0 55.3 1 72.7 110.1 93.9 715.7 5 X
8.0SMDJ48A 8.0SMDJ48CA 8PFX 8BFX 48 53.3 58.9 1 77.4 103.4 100.0 671.8 5 X
8.0SMDJ51A 8.0SMDJ51CA 8PFZ 8BFZ 51 56.7 62.7 1 82.4 97.1 106.5 631.2 5 X
8.0SMDJ54A 8.0SMDJ54CA 8PGE 8BGE 54 60.0 66.3 1 87.1 92.0 112.5 598.0 5 X
8.0SMDJ58A 8.0SMDJ58CA 8PGG 8BGG 58 64.4 71.2 1 93.6 85.5 120.9 555.8 5 X
8.0SMDJ60A 8.0SMDJ60CA 8PGK 8BGK 60 66.7 73.7 1 96.8 82.7 125.1 537.2 5 X
8.0SMDJ64A 8.0SMDJ64CA 8PGM 8BGM 64 71.1 78.6 1 103.0 77.7 133.1 504.9 5 X
8.0SMDJ70A 8.0SMDJ70CA 8PGP 8BGB 70 77.8 86.0 1 113.0 71.0 146.0 461.5 5 X
8.0SMDJ75A 8.0SMDJ75CA 8PGR 8BGR 75 83.3 92.1 1 121.0 66.2 156.3 430.3 5 X
8.0SMDJ78A 8.0SMDJ78CA 8PGT 8BGT 78 86.7 95.8 1 126.0 63.5 162.8 412.8 5 X
8.0SMDJ85A 8.0SMDJ85CA 8PGV 8BGV 85 94.4 104.0 1 137.0 58.4 177.0 379.6 5 X
8.0SMDJ90A 8.0SMDJ90CA 8PGX 8BGX 90 100.0 111.0 1 146.0 55.0 188.6 357.5 5 X
8.0SMDJ100A 8.0SMDJ100CA 8PGZ 8BGZ 100 111.0 123.0 1 162.0 49.4 209.3 321.1 5 X
8.0SMDJ110A 8.0SMDJ110CA 8PHE 8BHE 110 122.0 135.0 1 177.0 45.2 228.7 293.8 5 X
TVS Diodes
©2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 06/10/19
Surface Mount – 5000W > 5.0SMDJ series
I-V Curve Characteristics
Voltage Transients
Time
Voltage Across TVS
Current Through TVS
Voltage or Current
Figure 1 - TVS Transients Clamping Waveform
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)
Figure 2 - Peak Pulse Power Rating
1
10
100
1000
0.01 0.11 10
t
d
-Pulse Width (ms)
P
PPM
-Peak Pulse Power (KW)
0.001
8kW at 10/1000
µs, 25°C
TJ initial = Tamb
Vc VBR VR
IR
IT
Ipp
V
Uni-directional
VF
I
Vc V
BR
V
R
I
R
I
T
I
pp
V
Vc
V
BR
V
R
I
pp
I
R
I
T
Bi-directional
I
PPPM Peak Pulse Power Dissipation -- Max power dissipation
VR Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation
VBR Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT)
VC Clamping Voltage -- Peak voltage measured across the TVS at a specified IPPM (peak impulse current)
IR Reverse Leakage Current -- Current measured at VR
VF Forward Voltage Drop for Uni-directional
continues on next page.
8000W > 8.0SMDJ series
TVS Diodes
©2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 06/10/19
Surface Mount – 5000W > 5.0SMDJ series
IPPM- Peak Pulse Current, % IRSM
0
0
50
100
150
1.0 2.0 3.0 4.0
tr=10µsec
Peak Value
IPPM
IPPM
2
TJ=25°C
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of IPPM
10/1000µsec. Waveform
as defined by R.E.A
td
t-Time (ms)
Half Value
IPPM ( )
Cj(pF)
V
BR
- Reverse Breakdown Voltage(V)
1
10
100
1000
10000
100000
10 100 1000
Uni-direconal V=0V
Bi-direconal V=0V
Uni/Bi-direconal V=
V
R
Figure 4 - Pulse Waveform
Figure 5 - Typical Junction Capacitance
0
50
100
150
200
250
300
350
11
01
00
IFSM - Peak Forward Surve Current(A)
Number of cycle at 60 Hz
Figure 7 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
Ratings and Characteristic Curves (TA=25°C unless otherwise noted) (Continued)
Figure 3 - Peak Pulse Power Derating Curve
0
20
40
60
80
100
0255075100 125 175
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage %
150
TJ - Initial Junction Temperature (ºC)
0.001
0.01
0.1
1
10
100
0.0001 0.0010.010.1 110100 1000
Transient Thermal Impedance (°C/W)
T
P
- Pulse Duraon (s)
Figure 6 - Typical Transient Thermal Impedance
VF
-Peak Forward Current(A)
-Peak Forward Voltage(V)
0.01
0.1
1.0
10.0
100.0
01234567
8
V
F
Figure 8 - Peak Forward Voltage Drop vs Peak Forward
Current (Typical Values)
8000W > 8.0SMDJ series
TVS Diodes
©2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 06/10/19
Surface Mount – 5000W > 5.0SMDJ series
Physical Specifications
Weight 0.011 ounce ,0.3 grams
Case JEDEC DO214AB. Molded plastic body
over glass passivated junction
Polarity Color band denotes positive end (cathode)
except Bidirectional.
Terminal Matte Tin-plated leads, Solderable per
JESD22-B102
Dimensions
Dimensions Inches Millimeters
Min Max Min Max
A 0.114 0.126 2.900 3.200
B 0.260 0.280 6.600 7. 110
C 0.220 0.245 5.590 6.220
D 0.079 0.103 2.060 2.620
E 0.030 0.060 0.760 1.520
F - 0.008 - 0.203
G 0.305 0.320 7.750 8.130
H 0.006 0.012 0.152 0.305
I 0.129 - 3.300 -
J 0.094 - 2.400 -
K - 0.165 - 4.200
L 0.094 - 2.400 -
Soldering Parameters
Temperature (T)
Time (t)
Ts(min)
Ts(max)
TL
TP
ts
Preheat
tL
tp
Ramp-up Critical Zone
TL to TP
Ramp-down
t 25˚C to Peak
25˚C
Reflow Condition Lead–free assembly
Pre Heat
- Temperature Min (Ts(min)) 150°C
- Temperature Max (Ts(max)) 200°C
- Time (min to max) (ts) 60 – 180 secs
Average ramp up rate (Liquidus Temp (TA)
to peak 3°C/second max
TS(max) to TA - Ramp-up Rate 3°C/second max
Reflow - Temperature (TL) (Liquidus) 217°C
- Time (min to max) (tL) 60 – 150 seconds
Peak Temperature (TP) 260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)20 – 40 seconds
Ramp-down Rate 6°C/second max
Time 25°C to peak Temperature (TP) 8 minutes Max.
Do not exceed 260°C
I
L
K
J
Environmental Specifications
High Temp. Storage JESD22-A103
HTRB JESD22-A108
Temperature Cycling JESD22-A104
MSL JEDEC-J-STD-020, Level 1
H3TRB JESD22-A101
RSH JESD22-A111
DO-214AB (SMC J-Bend)
B
F
G
H
E
C
D
A
Cathode Band
(for Uni-directional products only)
8000W > 8.0SMDJ series
TVS Diodes
©2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 06/10/19
Surface Mount – 5000W > 5.0SMDJ series
Part Numbering System
Packaging Options
Part Marking System
VR
VOLTAGE
BI-DIRECTIONAL
5%
VBR
VOLTAGE TOLERANCE
SERIES
8.0SMDJ XXX CA
Tape and Reel Specification
Part number Component
Package Quantity Packaging
Option Packaging
Specification
8.0SMDJxxxXX DO-214AB 3000 Tape & Reel - 16mm tape/13” reel EIA STD RS-481
8.0SMDJxxxXX-T7 DO-214AB 500 Tape & Reel – 16mm tape/7” reel EIA STD RS-481
0.63
(16.0)
0.315
(8.0)
0.157
(4.0)
0.65
(16.4)
0.80 (20.2)
Arbor Hole Dia.
Optional
7” 7.0 (187)
13” 13.0 (330) Dimensions are in inches
(and millimeters).
Direction of Feed
0.059 DIA
(1.5) Cover tape
Cathode
F
XXX
YMXXX
Marking Code
Trace Code Marking
Y:Year Code
M: Month Code
XXX: Lot Code
Littelfuse Logo
Cathode Band
(for Uni-directional products only)
8000W > 8.0SMDJ series
Disclaimer Noce - Informaon furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and
test each product selected for their own applicaons. Lielfuse products are not designed for, and may not be used in, all applicaons.
Read complete Disclaimer Noce at hp://www.lielfuse.com/disclaimer-electronics.