ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously improving our
products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by
contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate
asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents.
100000 02/02 Revised © 2002 ADC Telecommunications, Inc. All Rights Reserved An Equal Opportunity Employer
Web Site: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-946-3292
For a complete listing of ADC's global sales office locations, please refer to our web site.
Network Cards
Model AV323/AV324 450 ft. / 137 m range
1-port/4-port DS3 Card Redundant APS port
Dual coax BNC connectors
Model AV311 OC-3 6,561 ft. / 2 km range
Multimode Module
Model AV312 OC-3 49,212 ft. / 15 km range
Single-mode Module
Model AV313 OC-3 131,233 ft. / 40 km range
Single-mode Module
All OC-3 Modules Dual SC connectors
Redundant APS port
ATM PVC and SVC support per ATM UNI 3.1 & 4.0 signaling, ITU Q.2931
signaling, and APS requirement per Bellcore TR-NWT-000253
Virtual circuit (VC) and virtual path (VP) switching, VP tunneling
4,096 VPI and 24,000 VCI
Support of CBR, VBR-rt, VBR-nrt and UBR traffic types
Selective discarding of cells according to CLP
Early, partial packet discard
Intelligent dynamic buffering architecture with per VP/VC queuing
Traffic management per VC basis
Full support for usage parameter control (UPC) and connection admission
(CAC) requirements
Management Cards
Model AV210 Network Single-slot master SNMP agent, chassis maintenance and alarm service card
Management Module Hierarchical master/subagent structure
Supports and backs up subagents for each subscriber or network card
Supports numerous public and private MIBs
300 MIPS RISC processor
32MB of RAM
EE-PROM (flash) for redundant configuration info
Built-in DHCP, DNS, TFTP and HTTP servers
Optional 10/100BASE-T line interface
In-band or out-of-band communications
Supports local alarms interface and local craft interface
Model AV220 Network LAN Network Port: 10/100Base-T Ethernet Port (Avidia chassis)
Management Module Console Port: RS-232 DB-9 Craft Port (management card)
ATM xDSL or Frame Ports: 96 WAN ports
Embedded HTTP agent
Embedded SNMP Master agent
Clocking: cell bus A and cell bus B
Bridging/Routing: RFC 2684
ATM connection features: 96 ports per card, maximum 254 VPC’s/VCC’s per card
Model AV355 ATM connection features: 8 ports per card, maximum 4094 VPC’s/VCC’s per card,
Combined T1 maximum 255 VPC per port, maximum 992 VCC per port
Management Module UNI support: ATM Forum UNI 3.1 signaling (SVC)
DS1 Mangement Interface Features: ATM in-band mgmt support
SNMP-based network management system support
IMA: one IMA group-up to eight ports in one group
up to four IMA groups- two ports per group
Model AV353 ATM connection features: 8 ports per card, maximum 4094 VPC’s/VCC’s per card,
Combined E1 maximum 255 VPC per port, maximum 992 VCC per port
Management Module UNI support: ATM Forum UNI 3.1 signaling (SVC)
E1 Mangement Interface Features: ATM in-band mgmt support
SNMP-based network management system support
IMA: up to four IMA groups- two ports per group