850/860 processor. The PCI 9054’s flexi-
ble, 3.3V, 5V tolerant I/O buffers com-
bined with a local bus operation up to
50MHz is ideally suited for current and
future PowerQUICC processors. The
PCI 9054 also provides support for the
MPC860 IDMA channel for movement of
data between internal MPC860 I/O and
the PCI bus. In addition, the PCI 9054
also makes use of the advanced Data
Pipe Architecture including unlimited
burst capability as shown in figure 1.
For PowerQUICC IDMA operation,
the
PCI 9054 transfers data to PCI
under the control of the IDMA hand-
shake protocol.
At the same time, the PCI 9054 Data
Pipe Architecture™ DMA can be oper-
ated bi-directionally, with the PCI 9054
as the master for both buses, to manage
transfers of data from the local bus
to the PCI bus or from the PCI bus to
the local bus. This is a prime example
of how the PCI 9054 provides superior
general purpose bus master perfor-
mance and gives the designer using the
PowerQUICC processor greater flexibility
in implementing multiple simultaneous
I/O transfers. The PCI 9054 has unlimit-
ed bursting capability which enhances
any MPC860 PowerQUICC design.
High Performance CompactPCI
Adapter Designs
Another key application for the PCI 9054
is CompactPCI adapters for telecom and
networking applications. These applica-
tions include high performance commu-
nications like WAN/LAN controller cards,
high speed modem cards, frame relay
cards, and telephony cards for telecom
switches and remote access systems.
The PCI 9054 has intergrated key
features to enable live-insertion of Hot
Swap CompactPCI adapters. The PCI
9054 PICMG 2.1 compatible Hot Swap
Friendly PCI interface includes both Hot
Swap Capable and Friendly features:
Hot Swap Capable
■
PCI specification v2.1 or better
■
Tolerant of Vcc from early power
■
Tolerant of asynchronous reset
■
Tolerant of precharge voltage
PCI Initiator
■
Type 0 and Type 1 configuration cycles
■
All PCI Memory and I/O cycles supported
■
Initiator READ prefetching
■
Burst length control—programmable
threshold pointer
■
Unaligned transfer control
■
Endian swapping
PCI Target
■
Multiple independent address spaces
■
Dynamic local bus width control
■
Target READ prefetching
■
Endian swapping
■
Local bus priority control
■
Latency timer
PCI Messaging
■
Complete messaging unit with mailbox
registers, doorbell registers
■
Queue management pointers which can
be used for message passing under the
I2O protocol or a custom protocol.
PCI 9054 PCI Applications
High performance Motorola MPC
850/860 PowerQUICC Designs
A key application for the PCI 9054 is
Motorola MPC 850/860 based adapters
for telecom and networking applications.
These applications include high perfor-
mance communications like WAN/LAN
controller cards, high speed modem cards,
frame relay cards, and networking cards
for routers and switches to name a few.
The PCI 9054 simplifies designs by pro-
viding an industry leading enhanced
direct-connect interface to the MPC
PCI 9054 I/O Accelerator
The PCI 9054, a 32-bit 33MHz Bus
Master I/O Accelerator, is the most
advanced general purpose bus master
device available. It offers a robust PCI v2.2
specification implementation enabling
burst transfers up to 132Mbytes/second.
The PCI 9054 incorporates PLX’s industry
leading Data Pipe Architecture
TM
including
DMA engines, programmable PCI
Initiator and Target data transfer modes
and PCI messaging functions.
Data Pipe Architecture™
Dual DMA Channels
■
Dual independent channels—provides
flexible prioritization scheme
■
Direct H/W control of DMA
-Demand mode DMA operation
-Block Mode or Scatter/Gather operation
-End of Transfer (EOT) signal
■
Programmable burst length including
unlimited burst
■
Shuttle mode DMA channel support
—Automatic invalidation of used
DMA descriptors
■
Unaligned transfer support
■
Supports PCI bus mastering from local
slave-only devices
■
Scatter/Gather list management
-Descriptors can be in the PCI or local
bus memory
-Allows independent scatter/gather
ring management
PCI Bus
Local Bus
ROM
PCI 9054
I/O Accelerator
MEM
PowerQUICC
MPC860
1
2
IDMA
DMA 0
DMA 1
Figure 1.
High Performance MPC860
PowerQUICC Adapter Design
1
2