IDT | THE ANALOG + DIGITAL COMPANY 4HSERIESMEMSPRODUCTBRIEF
Integrated Device Te chnology
The Analog and Digital Company™
2
MEMS Oscillators: 4H Series
POWERMANAGEMENT|ANALOG&RF|INTERFACE&CONNECTIVITY| TIMING&SYNCHRONIZATION |MEMORY&LOGIC|DATACONVERSION
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters
of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied
warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT’s products are not intended for use in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably
expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners. © Copyright 2013. All rights reserved. PB_MEMS4H_REVB0613
PACKAGEOUTLINEANDDIMENSIONS
TECHNICALSUPPORT
EMAIL: MEMS_Support@idt.com WEBSITE: www.idt.com/go/MEMS
PARTORDERINGGUIDELINE
0.65 ±0.05 0.85 ±0.05
0.0 – 0.05
0.203 Ref.
Pin#1 ID
Chamfer
0.30x45°
1.175 Bsc
3225
SMD
5032
SMD
7050
SMD
3.20
2.50
3.2
5.0
5.0
0.64
1.27
1.00
7.0
0.65 ±0.05
0.91
1.30 Pin #1 ID
R 0.45°
1.50
2.54
0.85
0.85
0.20
FEATURES
• DifferentialSMAoutput
• Standardbananaplugpowerconnectors
• Availableinstandard3225,5032and7050
size packages
• Selectableoutputterminationforboth
LVDS and LVPECL
• SwitchcontrolforOutputEnable(OE)
MEMSOSCILLATOR
EVALUATIONBOARD
7.0 x 5.0 mm
5.0 x 3.2 mm
3.2 x 2.5 mm