MCC 2SA1162 2SA1162-O 2SA1162-Y 2SA1162-GR omponents 20736 Marilla Street Chatsworth !"# $ % !"# TM Micro Commercial Components Features * * * * Capable of 0.15Watts of Power Dissipation. Collector-current: 0.15A Collector-base Voltage: -50V Operating and storage junction temperature range: -55 to +150 x Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 and MSL Rating 1 PNP Silicon Plastic-Encapsulate Transistor SOT-23 A D C O Electrical Characteristics @ 25 C Unless Otherwise Specified Symbol Parameter Min Max Units -50 --- Vdc -50 --- Vdc -5 --- Vdc --- -0.1 uAdc --- -0.1 uAdc 70 400 --- --- -0.3 Vdc 80 --- MHz --- 7 pF --- 10 dB C B OFF CHARACTERISTICS V(BR)CEO V(BR)CBO V(BR)EBO ICBO IEBO Collector-Emitter Breakdown Voltage (IC=-1mAdc, IB=0) Collector-Base Breakdown Voltage (IC=-100uAdc, IE=0) Emitter-Base Breakdown Voltage (IE=-100uAdc, IC=0) Collector Cutoff Current (VCB=-50Vdc, IE=0) Emitter Cutoff Current (VEB=-5.0Vdc, IC=0) VCE(sat) DC Current Gain (IC=-2.0mAdc, VCE=-6.0Vdc) Collector-Emitter Saturation Voltage (IC=-100mAdc, IB=-10mAdc) SMALL-SIGNAL CHARACTERISTICS fT Cob NF Transistor Frequency (IC=-1.0mAdc, VCE=-10Vdcz) Collector Output Capacitance (VCB=-10Vdc, IE=0, f=1MHz) Noise Figure (VCE=-6Vdc, IC=0.1mA, f=1KHz, Rg=10K) H G O 70-140 SO J DIMENSIONS DIM A B C D E F G H J K INCHES MIN .110 .083 .047 .035 .070 .018 .0005 .035 .003 .015 Y 120-240 SY GR 200-400 SG MAX .120 .098 .055 .041 .081 .024 .0039 .044 .007 .020 MM MIN 2.80 2.10 1.20 .89 1.78 .45 .013 .89 .085 .37 MAX 3.04 2.64 1.40 1.03 2.05 .60 .100 1.12 .180 .51 NOTE Suggested Solder Pad Layout CLASSIFICATION OF HFE (1) Rank Range Marking E E K ON CHARACTERISTICS hFE B F .031 .800 .035 .900 .079 2.000 inches mm .037 .950 .037 .950 www.mccsemi.com 1 of 2 Revision: 5 2008/01/01 MCC TM Micro Commercial Components Ordering Information Device Packing (Part Number)-TP Tape&Reel;3Kpcs/Reel ***IMPORTANT NOTICE*** Micro Commercial Components Corp . reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***APPLICATIONS DISCLAIMER*** Products offer by Micro Commercial Components Corp . are not intended for use in Medical, Aerospace or Military Applications. www.mccsemi.com Revision: 5 2 of 2 2008/01/01