“Engineered for life” is a registered trademark
of ITT Industries.©2005. All other trademarks
or registered trademarks are property of their
respective owners. All data subject to change
without notice.
CAB 05-Sept
www.ittcannon.com
Connector Product Locations
With manufacturing facilities, sales representatives and distributors located
worldwide, please visit our website at www.ittcannon.com for a complete listing and to
find the office nearest you.
GERMANY
Cannonstrasse 1
Weinstadt, 71384
phone: 49.7151.699.0
fax: 49.7151.699.217
HONG KONG
Unit 901 & 912, West Tower
Shun Tak Center
168-200 Connaught Road
Central
phone: 852.2732.2720
fax: 852.2732.2919
ITALY
Via Pietro Panzeri 10
Milano, 20123
phone: 39.2.58180.1
fax: 39.2.8372036
UK
Jays Close, Viables Estate
Basingstoke, RG22 4BA
phone: 44.1256.311200
fax: 44.1256.323356
USA
666 East Dyer Road
Santa Ana, CA 92705
toll free: 1.800.854.3028
phone: 1.714.557.4700
fax: 1.714.628.2142
2www.ittcannon.com
Table of Contents
Introduction . . . . . . . . . . . . . . . . . .3
Technical Data . . . . . . . . . . . . . . . . .4-5
Mounting Dimensions . . . . . . . . . . .6-7
How to Order . . . . . . . . . . . . . . . . .8
Contact Arrangements . . . . . . . . . .10
Connector Dimensions . . . . . . . . . . .28
Coupling Dimensions . . . . . . . . . . . .43
Accessories . . . . . . . . . . . . . . . . . . .44
Contacts . . . . . . . . . . . . . . . . . . . . .50
Product Safety Information . . . . . . .54
Harsh Environments
Cannon MIL-DTL-38999
High density contact arrangements,
corrosion-resistant shells, rear release crimp
snap-in contacts, operates under severe high
temperature vibration testing.
In addition to our CA Bayonet series, we also offer these connectivity solutions:
Cannon Trident
Versatile range of electrical connectors based
on a standard contact design. Options include;
industrial grade, harsh environment and
shielded circulars.
Interconnect Technologies & Solutions
For over 90 years, ITT has been developing innovative solutions for harsh environment applications. We have a proven
track record of demonstrating our expertise and commitment to the industrial industry, offering the broadest portfolio
of interconnect products.
Our interconnect range include sealed circulars, plastic and metal shell bayonet coupling circulars, miniature metal shell
circulars, PC board header connectors and sensor and direct device connectors. ITT is also a systems supplier, providing
value-added module and harness assemblies.
Environmentally Sealed
Cannon KPT / KPSE
Environmentally sealed miniature circular connectors
available in two versions: KPT (solder contact) and KPSE
(high performance crimp contact). Intermateable and
intermountable with all MIL-C-26482 connectors and is
available with many materials, finishes and
configurations.
ITT logo blocks and the composite ITT logo are registered
trademark of ITT Industries. ©2005
Introduction
Cannon CA-Bayonet series was designed in accordance with
the VG95234 specification. This versatile and highly reliable
connector series is an improvement on the well established
MIL-C-5015 series. CA-Bayonet has a proven bayonet coupling
design that offers exceptional vibration protected sealing
against fluids, and easy connection/disconnection.
Initially designed for aircraft and airborne applications, these
rugged connectors are used in the electrical equipment of
trucks, off-road vehicles, ships, earth-moving equipment,
telecommunications and others.
Connectors in accordance with VG95234 are interchangeable
with the corresponding MIL-C-5015 connectors. Both connector
lines feature the same shell dimensions and contacts layouts.
However, due to the different coupling systems (MIL-C-5015
threaded coupling, VG95234 bayonet coupling) they are not
intermateable.
Advantages
– rugged shell design
– environmental
– bayonet coupling for easy mating and unmating
– vibration proof
– waterproof up to 1 bar (35 feet of water)
Cannon has the complete VG95234 program available and, in
addition, many other types which exceed the requirements of
VG95234 and MIL-C-5015.
www.ittcannon.com
Cannon VG/CA-Bayonet
Attention:
Metal shell connectors which may be touched are not
suitable for mains power. See page 54 for Product Safety
Information, para. 5.
* European Community “Old Car” directive (2000/53/EG)
* European Community Waste Electrical and Electronic Equipment (WEEE)
2000/0158
* European Community restrictions of use of certain hazardous substances
in WEEE (ROS) (2000/0159)
Pin contact Pin insulator Barrel
Sealing ring End ring
Grommet
Bayonet
coupling nut
Shell Socket insulator
Socket contact Endbell
3
Connector Design
Due to the rugged shell made of an aluminium alloy, these
connectors withstand most severe conditions. Olive drab
chromate coating over cadmium plating protects the surface of
the shell.
Cannon offers zinc cobalt plating as an alternative to customers
who refuse cadmium plating and also as a general
improvement of the zinc plating.
The insulators are made of high quality polychloroprene and
withstand temperatures from -67°/+257°F (-55/125°C). This
material is self-extinguishing, resistant against hydraulic fluids,
jet fuel, diesel fuel, gasolines, lubricants, brake and fire
extinguisher fluids.
The contacts are made of copper alloy plated with a hard silver
finish guarantee at least 500 mating cycles.
All solder contacts feature a special passivation to comply with
ROHS requirements. The crimp contacts allow highly reliable
crimping with wires according to TL 6145-009, TL 6145-011
and MIL-W-5086 when using the recommended tools accord-
ing to VG95234. Crimp contacts can be exchanged at least five
times due to the contact retention.
The insulators are made of high quality polychloroprene and
withstand temperatures from -67°/+257°F (-55/125°C). This
material is self-extinguishing, resistant against hydraulic fluids,
The bayonet design allows fast and easy coupling and
uncoupling. An audible control by metallic sound and visual
control by colour-marked snap-in position offer additional
coupling security.
VG connectors are basically designed for single wire harnessing.
For full environmental sealing each conductor is sealed
completely within the grommet. Under certain conditions,
jacketed cables can be used for the shell styles E, G, M and N.
4www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Electrical Data
Contact rating at 68 °F (+20 °C)
Contact size max. current
A
10 8
16S/15S 22
16/15 22
12/25 41
8/60/100 74
4/160 135
0/500 245
Current rating
depending on ambient temperature
Contact resistance
(Millivolt test)
The contact resistance has to be tested according to VG95234
part 2, test no. 5.10.1 and VG 95210, part 37. The measuring
points are indicated in the illustration.
Operating voltage and connector usage
Connectors in equipments must not be separated or mated
under load when used per specifications.
As according to specification the connectors are suitable for an
operating voltage of 50 V (see Product Safety Information).
However, this is only valid, when the connectors are freely
accessible during operation and consequently might be
touchable. When the connectors will be operated with line
voltage, please contact ITT Customer Service.
Contact size Max. contact
resistance
metric AWG mΩ
10 – 12
15S/15 16S/16 6
25 12 3
60/100 8 1
160 4 0,5
500 0 0,2
Insulation resistance
Acc. to VG95319, part 2, test no. 5.12 and VG95210, part 32,
test condition B
Standard insulator material > 1000 MΩ
FKM insulator material (upon request) > 5000 MΩ
Test voltage
Acc. to VG95319, part 2, test no. 5.13 and VG 95210, part 31
Test voltage for service rating:
Service rating Test voltage Vrms
Instruments 1050
A1600
B4000
D2500
E3000
Air and creepage paths (min.)
Voltage class Instr. A D E
Air and creepage paths mm 0,7 1,1 2,8 4,8
Cannon VG/CA-Bayonet
5
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Mechanical Features
Ambient temperature
Standard insulator material
–55°/125°C (–67/257°F)
FKM insulator material*
–30°/200°C (–22/392°F)
Safety provisions**
IP 67 acc. to DIN 40 050
(1 bar pressure after 12 hrs.)
Vibration test
200 m/s2at 10 to 2000 Hz
Mating cycles
500 min.
Separating force per contact.
The corresponding separating force has to be measured
according to VG95319, part 2, test no. 5.7. using the required
test gage.
Contact size Separating force min.
metric AWG N Gage
10 – 0,3 G 0,99
15S/15 16S/16 1,0 G 1,56
25 12 1,5 G 2,36
60/100 8 3,0 G 3,58
160 4 4,0 G 5,69
500 0 8,5 G 9,04
Gage
(see also VG 95234, Part 1)
Coupling torque
The allowable coupling torques have to be tested under full
bundle conditions of the connectors to VG95319, part 2, test no.
5.8.2.
Shell Allowable coupling torque
size closing and opening Opening
Nm max. Nm min.
10SL 1,7 0,15
12S 2,5 0,23
14S 3,6 0,35
16S/16 5,5 0,46
18 8 0,58
20 9 0,7
22 11 0,8
24 14 0,8
28 17 0,92
32 19 1,03
36 23 1,03
Contact retention
The contact retention has to be tested according to VG95319,
part 2, test no. 5.4. Test force direction = Mating direction.
Contact Test force
size AWG N
10 – 30
15S/15 16S/16 35
25 12 55
60/100 8 80
160 4 90
500 0 95
Materials
Shell Aluminum alloy
Standard finish Olive drab chromate coating over
cadmium plating
Alternative finish Zinc cobalt (see page 9 –
Modification)
Insulator Polychloroprene (Standard)
and grommets FKM (High temperature)*
Contacts Copper alloy
Standard finish Hard silver
Special finish A176 nickel and hard gold plating
** upon request
** Longitudinal sealing: The connector is not sealed against fluids entering
through the cable, as the sealing lips of the single wire sealing are pressing
against the jacket of the individual cables.
Gage Contact diameter d L
+0,01 –1
G 0,99 0,99 7
G 1,56 1,56 9
G 2,36 2,36 12
G 3,58 3,58 13
G 5,69 5,69 13
G 9,04 9,04 13
6www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Mounting Holes
Mounting holes for wall mounting receptacles style A, B1, B2,
C1, C2, J1, J2, N1 and N2 acc. to VG95234, or CA 3100E/F/R-B
and CA 3102 E-B.
Shell ø d1H12 ø d2H13 e screws to be used
size Style A Style B1, B2 Style Style ±0,15 A, B2, C2, J2, B1, C1, J1, N
CA 3102E-B C1, C2, J1, J2 A, B2, C2, B1, C1, J1, N1 N2 CA 3100E, F
N1, N2 J2, N2
CA 3100E, F, R-B CA-B CA 3100E, F, R-B CA-B-Mod. 05
TBF-B/-05 Mod-05
10SL 16,4 18,5 3,4 4,5 18,2 M3...DIN 85 M4...DIN 84
12S 16,4 21,7 3,4 4,5 20,6 M3...DIN 85 M4...DIN 84
14S 19,7 24,9 3,4 4,5 23,0 M3...DIN 85 M4...DIN 84
16S 22,9 27,7 3,4 4,5 24,6 M3...DIN 85 M4...DIN 84
16 22,9 27,7 3,4 4,5 24,6 M3...DIN 85 M4...DIN 84
18 26,1 31,1 3,4 4,5 27,0 M3...DIN 85 M4...DIN 84
20 29,5 34,5 3,4 4,5 29,4 M3...DIN 85 M4...DIN 84
22 32,7 37,8 3,4 4,5 31,8 M3...DIN 85 M4...DIN 84
24 36,0 41,3 3,9 4,5 34,9 M3,5...DIN 85 M4...DIN 84
28 42,0 47,1 3,9 5,5 39,7 M3,5...DIN 85 M5...DIN 84
32 48,3 53,8 4,5 5,5 44,5 M4...DIN 85 M5...DIN 84
36 54,6 60,0 4,5 5,5 49,2 M4...DIN 85 M5...DIN 84
* When used with safety elements the max. outer diameter must not exceed the outer diameter of the screw head.
Harnessing
VG95234 connectors are designed for single wire harnessing.
Full sealing will be guaranteed only by using wires in accordance
with MIL-W-5086, LN 9251 (for AWG) and TL 6145-009 and TL
6145-011 (for metric wires). All other wires have to conform to
wire and insulation diameters with the data given in the follow-
ing table:
Contact size Crimp- and solder contacts Insulation Ø
AWG metric AWG metric AWG metric
mm mm2mm
– 10 – 0,75-1,0 – 1,45-2,5
16S/15S 16/15 16 0,75-1,5 1,6-2,8 1,60-2,8
12 25 12 2,5 2,9-3,5 2,9-3,5
– 60 – 6,0 – 3,5-4,9
8 100 8 10,0 4,2-5,8 5,5-6,5
4 160 4 16,0 6,2-9,0 7,1-9,0
0 500 0 50,0 10,5-13,0 10,5-13,0
Wire Stripping
Either mechanical or hot stripping can be used. Prevent
conductor or insulator damage. For solder contacts, conductors
have to be pretinned.
Note: Do not twist conductors used with crimp contacts. Do not
touch uninsulated conductors before crimping. Twisting of
conductors and grease or lubricants on the wires cause poor crimp
quality.
Contact size Stripping length
AWG metric mm
– 10 4,0 + 0,4
16S/15S 16/15 6,0 + 0,5
12 25 6,0 + 0,5
8 60/100 11,0 + 0,8 – 0,4
4 160 11,0 + 0,8 – 0,4
0 500 13,0 + 0,8 – 0,4
Shell L1 L2 L3 L4 L5 L6
Size (D) (G/M) (G/M) R1
min. min. min. min. +10 mm max. max.
10SL 70 70 70 65 75 8,0 3,5
12S 70 75 75 70 80 8,0 3,5
14S 70 75 75 70 80 8,0 3,5
16S 70 90 80 80 90 8,0 3,5
16 80 100 90 90 100 6,5 3,5
18 90 100 90 90 100 8,0 3,5
20 90 100 95 100 110 8,0 3,5
22 90 100 95 100 110 8,0 3,5
24 110 120 105 110 120 8,0 5,0
28 110 120 105 110 120 9,0 5,0
32 110 180 115 120 130 9,0 6,0
36 110 190 120 130 140 9,0 6,0
Cannon VG/CA-Bayonet
7
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Separating and Mounting Dimensions
When using connectors according to VG 95234 the below mentioned installation dimensions have to be met.
Connector style D
or
CA3106E-B and
CA3106F-B
CA3106F-B-13/-14/-15
Connector style G, M, R1
or
CA3106E-B-02/-03/-06
CA3106E-B-13/-14/-15 and
CA3106E-B-32
with shrink boot, straight,
acc. VG95343
Connector style E, E1 and K
or
CA3108E/F-B and
CA3108F-B-13/-14/-15
Connector style G, M, R1
or
CA3106E-B-02/-03/-06
CA3106E-B-32
with shrink boot 90°
acc. to VG 95343
8www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
How to order
VG Order reference
VG 95234 A – 32 – 6 S 1 N
Series
Shell style
Dash
Shell size
Contact arrangement
Contact type
Contact termination
Insulator position
Explanation
Series VG 95234
Shell style J1, J2, N1, N2, S1, U1, U2 – wall
mounting receptacle
F – cable connection plug
A, B1, B2 – box mounting receptacle
C1, C2 – bulkhead receptacle
D, G, H, L, M, R1 – straight plug
E, E1, K – plug 90°
Shell size 10SL, 14S, 16S, 16, 18, 20, 22,
24, 28, 32 and 36
Contact arrangement see page 10
Contact type P – Pin contact
S – Socket contact
Contact termination without identification –
contacts for metric wire sizes
identification 1* –
contact for AWG wire sizes
Insulator position see page 24
Accessories acc. to VG
Dummy receptacles VG95234 BOD
Gaskets, front mount VG95234 DA
Gaskets, rear mount VG95234 DH
Protecting caps VG95234 KR
Protecting caps VG95234 KB
Cabel caps VG95234 KK
Bushing VG95234 KT
* Only valid for layout within the VG95234.
Layout list permitting identification 1:
Layout Page Number
22-2 15
24- 11 16
24-12 17
28-22 19
32-1 19
32-6 20
36-3 21
36-5 21
36-6 21
How to order
Cannon Order reference
CA 3106 E 18 – 1 S X B – ***
Series
Shell style
Class
Shell size
Contact arrangement
Contact type
Insulator position
Connectors with bayonet coupling
Dash
Modification
Explanation
Series CA – Circular connectors with bayonet
coupling
Shell style 3100 – Wall mounting receptacle
3101 – Cable connecting plug
3102 – Box mounting receptacle
3105 – Dummy receptacle for front and
panel mounting
3106 – Plug, straight
3108 – Plug, 90°
TBF – Bulkhead receptacle
Class
E – environmental with resilient
insulators and endbell with clamp
and bushing
F – environmental with resilient
insulator and endbell for flex tube
R – environmental with resilient
insulator and shortened light-weight
endbell without cable clamp
Shell size 10SL, 12S, 14S, 16S, 16, 18, 20,
22, 24, 28, 32 and 36
Contact
arrangement see page 10
Contact type P – Pin
S – Socket
PS – one side pin, one side socket
(only for TBF)
Insulator position Besides the normal position further insulator
positions are possible for Cannon connectors
(see page 24) to prevent mismating.
Polarization is achieved by turning the pin
contact insulator clockwise towards the
shell, the socket insulator, however, in
opposite clockwise direction.
This information refers to the mating side of
the contact insulator.
For special insert alternations of standard
inserts see page 25.
Modification see next page
Cannon VG/CA-Bayonet
9
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Modification 01 – metric crimp contacts
(only for CA......-B) 02 – adapter for heat shrink boots
AWG crimp contacts
03 – adapter for heat shrink boots,
metric contacts
04 – rear mount, thread in flange,
metric crimp contacts
05 – trear mount, through holes in flange,
(CA3100, CA 3102,
CA 20, TBF)
06 – shrink boot adapter, thread holes
in flange, solder pot contacts
08 – angular endbell, through holes in
flange (for CA3100 only)
09 – angular endbell, through holes in
flange (for CA3100 only)
13 – shielded version, solder contacts
14 – shielded version, metric crimp con-
tacts
15 – shielded version, AWG crimp contacts
41 – shielded version, heat shrink boot
adapter
32 – endbell for shielded system cable acc.
MTV 6145-005
109 – F80, rear mount, thread holes in
flange (for CA3100 only)
111 – rear mount, thread holes (CA3102
only), solder contacts
F80 – AWG crimp contacts
A232 – Zinc cobalt black
A233 – Zinc cobalt green
F42 – less grommet and backshell
F0 – less contacts, contacts to be
ordered separately
see pages 51– 52
Important!
When connectors are requested according to VG 95234
modification, e.g. with another finish, with other contact arrange-
ments and solder contacts, they are to be ordered only with the ITT
Cannon order reference.
Connectors acc. to VG95234 are generally available with insert po-
sitions X and Y only.
VG order reference with modification is not possible.
With Spring Washer and Friction Ring
These connectors feature a spring washer and a friction ring
under the coupling nut.
Advantage Vibrations are being compensated
Ordering example according performance class insert
„W“ after Class E, F or R
CA06EW – connector with spring washer, endbell
with cable and bushing
CA06FW – connector with spring washer, endbell
for flex tube
CA06RW – connector with spring washer and short
endbell
CA08EW/FW – connector with spring washer and
90° endbell
The connectors acc. to VG95234 are generally delivered with
spring washer.
Other Shell Styles
CA3100E-B-02/03/06 – adapter for heat shrink boot
CA3100F-B-08/09 – 90° endbell for flex tube
CA3100E-B-08/09 – 90° endbell, cable clamp and bushing
CA06PG-B – PG adapter
CA3101F-B-08/09 – 90° endbell flex tube
CA02L-B – receptacle with pcb solder contacts
CA20L-B – rear mount receptacle with pcb solder
contacts
CA07A-B – jam nut receptacle
CA00EP-B-TL – TINEL-LOCK adapter
CA06EW-B-TLXX – TINEL-LOCK adapter
No. Contact arrangement Service Insulator position Position Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA N V W X Y Z including contacts
pin socket
310SL-3 10SL-3 – 0––––– – – 6 9
15S 16S A
210SL-4 10SL-4
15S 16S A 0––––– – – 4 6
212S-3
– 16S A 0 100 70 145 215 290 – – 4 6
112S-4
– 16S D 0––––– 3 110 3 4,5
412SA10
– 16S Instr. 0 ––––– 3 110 6 8
8 250
314S-1
– 16S A 0––––– – – 6 9
414S-2
– 16S Instr. 0 – – 120 240 – – – 7 11
114S-4
– 16S D 0––––– – – 4 7
514S-5
– 16S Instr. 0 – – 110 – – – – 9 13
614S-6 14S-6
15S 16S Instr. 0 ––––– – – 11 15
314S-7
– 16S A 0 – 90 180 270 – – 6 9
214S-9
– 16S Instr. 0 – 70 145 215 290 – – 5 18
714SA7
– 16S Instr. 0 ––––– – – 10 15
716S-1 16S-1
15S 16S A 0 – 80 – – 280 – – 14 19
216S-4 16S-4
15S 16S D 0 – 35 110 250 325 – – 7 10
316S-5
– 16S A 0 – 70 145 215 290 – – 8 12
516S-8
– 16S A 0 – – 170 265 – – – 10 15
10 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
▲
▲
▲
▲
View on Mating
face of Pin Insulator
▲
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
No. Contact arrangement Service Insulator position Position Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA N V W X Y Z including contacts
pin socket
316-7 16-7
2 15 16 A 0 – 80 110 250 280 – – 16 25
1 100 8
416-9
2 – 12 A 0 – 35 110 250 325 – – 13 20
216
316-10 16-10
25 12 A 0 – 90 180 270 – – – 17 24
216-11
– 12 A 0 – 35 110 250 325 – – 11 17
116-12 16-12
160 4 A 0––––– – – 24 28
216A11 16A11
25 (socket) 12 A 0 – 35 110 250 325 – – 11 17
25A (pin)
10 18-1 18-1 A (B, C,
15 16 F, G) 0 – 70 145 – 290 – – 24 37
Instr.
(all others)
218-3
– 12 D 0 – 35 110 250 325 – – 13 22
418-4
– 16 D 0 – 35 110 250 325 – – 19 30
318-5
2 – 12 D 0 – 80 110 250 280 – – 15 25
116
118-6
– 4 D 0––––– – – 24 32
118-7
– 8 D 0––––– – – 16 25
818-8
1 – 12 A 0 – 70 – – 290 – – 18 30
716
718-9
2 – 12 Instr. 0 – 80 110 250 280 – – 18 30
516
4– 18-10 A 0 – – 120 240 – – – 13 22
12
518-11 18-11 A 0 – – 170 265 – – – 31 40
25 12
Cannon VG/CA-Bayonet
11
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
▲
▲
View on Mating
face of Pin Insulator
▲
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
No. Contact arrangement Service Insulator position Position Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA N V W X Y Z including contacts
pin socket
6– 18-12 A 0–80––280 – – 15 25
16
418-13 18-13
1 60 8 A 0 – 80 110 250 280 – – 15 24
325 12
718-17
2 – 12 Instr. 0 ––––– 12 100 15 23
516
10 – 18-19 A 0 – – 120 240 – – – 19 31
16
5– 18-20 A 0 – 90 180 270 – – 15 25
16
3– 18-21 A 0––––– – – 17 28
12
3– 18-22 D 0 – 70 145 215 290 – – 10 20
16
120-2 20-2 D 0––––– – – 46 55
500 0
320-3
– 12 D 0 – 70 145 215 290 – – 28 42
4– 20-4 D 0 – 45 110 250 – – – 24 40
12
3– 20-6 D 0––––– – – 22 36
16
820-7 A (C, D,
– 16 E, F) 0 – 80 110 250 280 – – 28 42
D (A, B,
H, G)
620-8 20-8
2 100 8 Instr. 0 – 80 110 250 280 – – 37 49
415 16
13 – 20-11 Instr. 0 ––––– – – 25 41
16
12 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
▲
View on Mating
face of Pin Insulator
▲
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
No. Contact arrangement Service Insulator position Position Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA N V W X Y Z including contacts
pin socket
5– 20-14 A 0 – 80 110 250 280 – – 22 39
3– 12
28
7– 20-15 A 0–80––280 – – 27 46
12
920-16
2 – 12 A 0 – 80 110 250 280 – – 19 32
716
620-17
5 – 12 A 0 – 90 180 270 – – – 20 33
116
920-18
3 – 12 A – – 35 110 250 325 – – 19 32
616
3– 20-19 A 0 – 90 180 270 – – – 33 46
8
6– 20-22
3 8 A – – 80 110 250 280 – – 37 49
316
220-23
– 8 A – – 35 110 250 325 – – 25 35
4– 20-24 A 0 – 35 110 250 325 – – 40 53
28
216
14 – 20-27 A 0 – 35 110 250 325 – – 26 42
16
17 – 20-29 A 0–80––280 – – 29 47
16
Cannon VG/CA-Bayonet
13
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
View on Mating
face of Pin Insulator
▲
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
No. Contact arrangement Service Insulator position Position Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA N V W X Y Z including contacts
pin socket
11 – 20-33 A 0–––– 2 260 – 23 38
16 3 110
17 130
920A9 20A9 D (J)
25 12 Instr. 0 – – 110 250 – – – 21 35
(all others)
19 20A48 20A48 Instr. 0 – – 80 280 – – – 30 50
15 16
2– 22-1 D 0 – 35 110 250 325 – – 28 42
8
322-2 22-2 D 0 – 70 145 215 290 – – 35 50
88
422-4
2 – 8 A – – 35 110 250 325 – – 34 48
212
622-5
2 – 12 D – – 35 110 250 325 – – 23 38
416
122-7
– 0 E 0––––– – – 45 57
2– 22-8
– 12 E – – 35 110 250 325 – – 18 28
3– 22-9 E 0 – 70 145 215 290 – – 21 32
–12
14 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
View on Mating
face of Pin Insulator
▲
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
No. Contact arrangement Service Insulator position Position Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA N V W X Y Z including contacts
pin socket
4– 22-10
– 16 E – – 35 110 250 325 – – 17 31
522-12 22-12 D 0 – 80 110 250 280 – – 28 42
2 100 8
315 16
19 22-14 22-14 A 0–80––280 – – 30 50
15 16
622-15
5 12 A (A, B,
1 – 16 C, E, F) 0 – 80 110 250 280 – – 30 50
E (D)
9– 22-16 A 0 – 80 110 250 280
3 12 – – – 28 45
616
14 – 22-19 A 0 – 80 110 250 280 – – 28 47
16
9– 22-20 A 0 – 35 110 250 325 – – 22 39
16
3– 22-21 A 0 – 80 110 250 280
2 16 – – – 49 58
10
422-22 22-22 A 0 – – 110 250 – – – 42 58
100 8
8– 22-23 D (H)
12 A (all 0 – 35 – 250 – – – 34 54
others)
922-27 22-27
160 8
A (A to H)
0 – 80 – 250 280 – – 21 34
815 16
D (J)
Cannon VG/CA-Bayonet
15
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
▲
View on Mating
face of Pin Insulator
▲
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
No. Contact arrangement Service Insulator position Position Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA N V W X Y Z including contacts
pin socket
722-28
– 12 A ––80––280 – – 33 50
22B22 – A 0 – – 110 250 –
460 – – 42 58
7– 24-2 D 0 – 80 – – 280 – – 33 53
12
424-4
1 – 0 D – – 80 110 250 280 – – 51 63
316
16 24-5
– 16 A – – 80 110 250 280 – – 30 54
824-6 A
8 – 12 (B,C,D,E,F) 0 – 80 110 250 280 – – 32 41
16 24-7
2 – 12 A 0 – 80 110 250 280 – – 45 65
14 16
2– 24-9 A 0 – 35 110 250 325 – – 45 60
4
724-10 24-10 A 0 – 80 – – 280 – – 65 85
100 8
924-11 24-11
3 100/8 8 A 0 – 35 110 250 325 – – 55 75
6 25/12 12
16 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
View on Mating
face of Pin Insulator
▲
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
No. Contact arrangement Service Insulator position Position Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA N V W X Y Z including contacts
pin socket
524-12 24-12
2 4 4 A 0 – 80 110 250 280 – – 60 80
312 12
12 – 24-19 A 0––––– – – 28 47
16
11 24-20
2 – 12 D 0 – 80 110 250 280 – – 40 60
916
4– 24-22 D 0 – 45 110 250 – – 44 61
8
724-27
– 16 E ––80––280 – – 21 37
24 24-28 24-28 Instr. 0 – 80 110 250 280 – – 40 65
15 16
12 – 24A24 A –––––– 2 260 46 71
12 –––––– 4 80
–––––– 9 280
–––––– 12 100
28 24A28
– 16 Instr. – – 65 146 235 – – – 42 75
14 28-2
12 – 16 D – – 35 110 250 325 – – 43 61
212
528-5
2 – 4 D – – 35 110 250 325 – – 60 70
216
112
Cannon VG/CA-Bayonet
17
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
View on Mating
face of Pin Insulator
▲
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
No. Contact arrangement Service Insulator position Position Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA N V W X Y Z including contacts
pin socket
12 28-9
6 – 16 D – – 80 110 250 280 – – 46 65
612
728-10
2 – 4 A (= A, B, C, – – 80 110 250 280 – – 80 91
2 8 D, E, F)
3 12 D (= G)
22 28-11 28-11
4 25 12 A 0 – 80 110 250 280 – – 65 110
18 15 16
26 – 28-12 A 0 – 90 180 270 – – – 47 77
16
35 – 28-15 A 0 – 80 110 250 280 – – 54 90
16
20 28-16 A (A-L)
– 16 D (M, N, P) 0 – 80 110 250 280 – – 41 68
B (R)
10 28-19
6– 16
A (= C, E, G, J, K, L)
– – 80 110 250 280 – – 40 58
412
D = A, B
B = H, M
14 28-20 28-20
10 25 12 A 0 – 80 110 250 280 – – 65 110
415 16
18 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
View on Mating
face of Pin Insulator
▲
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
No. Contact arrangement Service Insulator position Position Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA N V W X Y Z including contacts
pin socket
37 28-21 28-21
15 16 A 0 – 80 110 250 280 – – 58 93
628-22 28-22
3 160/4 4 D 0 – 70 145 215 290 – – 80 120
3 15/16 16
All alternating insert position as above are permitted for VG95234 types.
12 28-51
– 12 D – – 80 135 195 – – – 57 77
928A16
4 – 4 A (e) 0––––– 2 260 100 135
5 16 Instr. –––––– 3 110
(all others) –––––– 8 250
–––––– 9 280
43 – 28A51 A 0––––– 3 110 64 107
16 –––––– 4 80
–––––– 8 250
–––––– 9 280
–––––– 12 100
28 28A63 28A63
9 25 12 A 0 – – 100 260 – – – 85 135
19 15 16
532-1 32-1
2 500/0 0 E (A) 0 – 80 110 250 280 – – 130 155
3 25/12 12 D (all
others)
232-5
0 D 0 – 35 110 250 325 – – 86 114
Cannon VG/CA-Bayonet
19
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
View on Mating
face of Pin Insulator
▲
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
No. Contact arrangement Service Insulator position Position Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA N V W X Y Z including contacts
pin socket
23 32-6 32-6
2 160/4 4
3 60/8 8 A 0 – 80 110 250 280 – – 130 170
2 25/12 12
16 15/16 16
35 32-7 32-7
7 25 12 Instr.
28 15 16 (A, B, U, I.) 0 – 80 125 235 280 – – 110 160
A (all others)
30 32-8
6 – 12 A 0 – 80 125 235 280 – – 105 155
24 16
14 32-9
12 – 16 D 0 – 80 110 250 280 – – 79 130
24
23 32-13
5 – 12 D 0 – 80 110 250 280 – – 95 145
18 16
832-15
2 – 0 D 0 – 35 110 250 325 – – 140 165
612
4– 32-17 D 0 – 45 110 250 – – – 80 116
4
20 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
View on Mating
face of Pin Insulator
▲
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
No. Contact arrangement Service Insulator position Position Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA N V W X Y Z including contacts
pin socket
–––––– 2 260
54 32A10 –––––– 3 110
– 16 A – – 80 110 250 280 4 80 89 132
–––––– 8 250
–––––– 9 280
–––––– 12 100
–––––– 2 260
47 – 32A47 –––––– 3 110
16 A –––––– 4 80 73 120
–––––– 8 250
–––––– 9 280
–––––– 12 100
55 32A55
16 A – – 80 110 250 280 – – 90 134
61 32A69 32A69 Instr. 0 – – 110 250 – – – 49 84
20 15 16
41 10 20
Not for through-bulkhead receptacle C1 / C2.
636-3 36-3
3 500/0 0 D 0 – 70 145 215 290 – – 165 200
3 25/12 12
All alternating insert position as above are permitted for VG95234 type.
436-5 36-5 A 0 – – 120 240 – – – 152 181
500/0 0
636-6 36-6
4 4 4 A 0 – 35 110 250 325 – – 155 173
20 0
Cannon VG/CA-Bayonet
21
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
View on Mating
face of Pin Insulator
▲
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
No. Contact arrangement Service Insulator position Position Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA N V W X Y Z including contacts
pin socket
47 36-7
7 – 12 A – – 80 110 250 280 – – 92 144
40 16
47 36-8
1 – 12 A – – 80 110 250 280 – – 80 132
46 16
31 36-9
14 – 16 A 0 – 80 125 235 280 – – 116 159
14 12
28
14
48 36-10 36-10 A 0 – 80 125 235 280 – – 79 133
15 16
16 36-14
5 – 8 D 0––––– – – 150 230
512
616
35 36-15 D (m)
– 16 A (all 0 – 60 125 245 305 – – 70 111
others)
22 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
View on Mating
face of Pin Insulator
▲
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
No. Contact arrangement Service Insulator position Position Special Insulator weight
of Contact size rating polarization (g)
Contacts VG CA N V W X Y Z including contacts
pin socket
–––––– 2 260
52 – 36A34 –––––– 3 110
16 A –––––– 4 80 83 139
–––––– 8 250
–––––– 9 280
–––––– 12 100
–––––– 20 220
8– 36A35
4 16 A –––––– 2 260 172 183
4 0 –––––– 3 110
–––––– 8 250
–––––– 9 280
–––––– 2 260
27 – 36A46 –––––– 3 110
12 A –––––– 4 80 112 154
–––––– 8 250
–––––– 9 280
–––––– 12 100
39 – 36A98
8 8 Instr. 0 ––––– – – 160 140
31 16
65 – 36A99
15 16 Instr. – – 30 135 – – – – 80 121
50 20*
* reduced contact termination 0,3 mm2
Cannon VG/CA-Bayonet
23
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
View on Mating
face of Pin Insulator
▲
Attention: for all alternate positions of these contact arrangements a tendency to overmate can be stated.
It is within the customer’s responsibility to use these insert positions.
▲
24 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Alternate Insert Positions
Indicates location of centerline of key or
keyway of shells in fixed normal position.
Insert is rotated as shown by arrow and
letters.
Connectors according to VG95234 are
generally available with insert positions X
and Y only.
Tolerances:
# 10SL-20: ± 2°
# 22-36: ± 1,5°
# 32A69: ± 1° Pin
Mating face
Normal position
Socket
Mating face
Cannon VG/CA-Bayonet
25
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Special Insert Alternations
Special insert alternations are marked by positions. The position
number indicates the turning of the contact insert in the direction
of the polarizing key in view of the mating or termination side
of the socket insulator.
Positions
View shows mating side of pin or termination side of socket.
Insert positions are added without hyphen directly behind the
contact type.
Example:
CA3106F32A10P -B-01
2
Position Polarization
2 260°
3 110°
480°
5 use pos. 3
685°
8 250°
9 280°
11 105°
12 100°
13 use pos. 8
14 30°
15 45°
16 120°
17 130°
18 150°
19 195°
20 220°
21 255°
22 290°
23 165°
24 330°
25 235°
26 125°
Contact Position Contact Polarization
arrangement of arrangement
12SA10 3 12SA10 110°
8 12SA10 250°
18-17 12 18-9 100°
24A24 2 24A24 260°
4 24A24 80°
9 24A24 280°
12 24A24 100°
32-16 12 32-6 100°
26 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Contact No. of Contact size
arrangement contacts 048121620
500 160 100 25 15 10
60
12S4 11
14S4 11
16-12 11
18-6 11
18-7 11
20-2 11
22-7 11
10SL4 22
14S9 22
16S4 22
16-11 22
16A11 22
18-3 22
20-23 22
22-1 22
22-8 22
24-9 22
32-5 22
10SL3 33
14S1 33
14S7 33
16S5 33
16-7 312
16-10 33
18-5 321
18-21 33
18-22 33
20-6 33
20-19 33
22-2 33
22-9 33
22-21 31 2
12SA10 44
14S2 44
16-9 422
18-4 44
18-10 44
18-13 413
20-4 44
20-24 422
22-4 422
22-10 44
22-22 44
22B22 44
24-4 41 3
24-22 44
32-17 44
36-5 44
Contact No. of Contact size
arrangement contacts 0 4 8 12 16 20
500 160 100 25 15 10
60
14S5 55
16S8 55
18-11 55
18-20 55
22-12 523
24-12 523
28-5 5212
32-1 52 3
14S6 66
18-12 66
20-8 624
20-22 633
22-5 624
22-15 651
28-22 63 3
36-3 63 3
36-6 624
14SA7 77
16S1 77
18-9 725
18-17 725
20-15 77
22-28 77
24-2 77
24-10 77
24-27 77
28-10 7 223
18-8 817
20-7 88
22-23 88
32-15 82 6
36A35 84 4
20-169 27
20-18 936
20A9 99
22-16 936
22-20 99
22-27 918
24-11 936
28A16 94 5
18-1 10 10
18-19 10 10
28-19 10 4 6
20-33 11 11
24-20 11 2 9
Contact Arrangements
Cannon VG/CA-Bayonet
27
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Contact No. of Contact size
arrangement contacts 048121620
500 160 100 25 15 10
60
24-19 12 12
24A24 12 12
28-9 12 6 6
28-51 12 12
20-11 13 13
20-27 14 14
22-19 14 14
28-2 14 2 12
28-20 14 10 4
32-9 14 2 12
24-5 16 16
24-7 16 2 14
36-14 16 556
20-29 17 17
20A48 19 19
22-14 19 19
28-16 20 20
28-11 22 4 18
32-6 23 23216
32-13 23 5 18
24-28 24 24
28-12 26 26
36A46 27 27
24A28 28 28
28A63 28 9 19
32-8 30 6 24
36-9 31 121414
28-15 35 35
32-7 35 7 28
36-15 35 35
28-21 37 37
36A98 39 8 31
Contact No. of Contact size
arrangement contacts 0 4 8 12 16 20
500 160 100 25 15 10
60
28A51 43 43
32A47 47 47
36-7 47 7 40
36-8 47 1 46
36-10 48 48
36A34 52 52
32A10 54 54
32A55 55 55
32A69 61 20 41
36A99 65 15 50
Contact Arrangements
28 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
VG95234 Cannon d1d2d3l1l2l3l4Weight1)
Part no. Part no. max. H13 –0,15 ±0,3 +0,4 ±0,2 ±0,3 g max.
VG95234A-10SL CA3102E10SL-**-B 16,2 3,2 18,2 24,7 14,2 2,8 25,4 12
– CA3102E12S-**-B 16,2 3,2 21,4 24,7 14,2 3,2 28,0 15
VG95234A-14S CA3102E14S-**-B 19,2 3,2 24,6 24,7 14,2 3,2 30,0 17
VG95234A-16S CA3102E16S-**-B 22,4 3,2 27,4 24,7 14,2 3,2 32,5 19
VG95234A-16 CA3102E16-**-B 22,4 3,2 27,4 33,8 19,0 3,2 32,5 22
VG95234A-18 CA3102E18-**-B 25,6 3,2 30,8 33,8 19,0 4,0 35,0 28
VG95234A-20 CA3102E20-**-B 29,0 3,2 34,2 33,8 19,0 4,0 38,0 33
VG95234A-22 CA3102E22-**-B 32,2 3,2 37,4 33,8 19,0 4,0 41,0 38
VG95234A-24 CA3102E24-**-B 35,3 3,7 40,9 33,8 20,6 4,0 44,5 46
VG95234A-28 CA3102E28-**-B 41,4 3,7 46,7 33,8 20,6 4,0 50,8 52
VG95234A-32 CA3102E32-**-B 47,8 4,3 53,4 33,8 22,2 4,0 57,0 64
VG95234A-36 CA3102E36-**-B 52,6 4,3 59,6 33,8 22,2 4,0 63,5 80
1) Weight without insulator
Box Mounting Receptacle
VG 95234 – Style A
CA 3102E-B and Modifications, see page 9
Receptacle for front panel mounting with square flange.
Threaded holes in flange not possible.
CA02L-B designates a receptacle for front panel mounting
with solder pin contacts to solder into printed circuits. All
pattern drawings upon request. For all other dimensions see
above table.
For contact arrangements with #16 and #12 contacts only.
29
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Box Mounting Receptacle
VG95234 Style B1 (with threaded holes in flange)
CA3102-B and Modifications, e g -04, -109 or -111
CA3102-B designates a receptacle with square flange
for rear panel mounting.
VG95234 Style B2 (with through holes in flange)
CA3102E-B and Modifications, see page 9
VG95234 Cannon d1d2d3l1l2l3l4Weight1)
Part no. Part no. max. B1 B2 –0,15 ±0,3 +0,4 ±0,2 ±0,3 g max.
H13
VG95234XX-10SL-* CA3102E10SL-*B-*** 16,2 M4 3,2 18,2 24,7 18,2 2,8 25,4 14
– CA3102E12S-*B-*** 16,2 M4 3,2 21,4 24,7 18,2 3,2 28,0 18
VG95234XX-14S-* CA3102E14S-*B-*** 19,2 M4 3,2 24,6 24,7 18,2 3,2 30,0 21
CG95234XX-16S-* CA3102E16S-*B-*** 22,4 M4 3,2 27,4 24,7 18,2 3,2 32,5 22
VG95234XX-16-* CA3102E16-*B-*** 22,4 M4 3,2 27,4 33,8 21,5 3,2 32,5 27
VG95234XX-18-* CA3102E18-*B-*** 25,6 M4 3,2 30,8 33,8 23,05 4,0 35,0 33
VG95234XX-20-* CA3102E20-*B-*** 29,0 M4 3,2 34,2 33,8 23,05 4,0 38,0 37
VG95234XX-22-* CA3102E22-*B-*** 32,2 M4 3,2 37,4 33,8 23,05 4,0 41,0 42
VG95234XX-24-* CA3102E24-*B-*** 35,3 M4 3,7 40,9 33,8 23,05 4,0 44,5 48
VG95234XX-28-* CA3102E28-*B-*** 41,4 M5 3,7 46,7 33,8 24,05 4,0 50,8 58
VG95234XX-32-* CA3102E32-*B-*** 47,8 M5 4,3 53,4 33,8 24,05 4,0 57,0 72
VG95234XX-36-* CA3102E36-*B-*** 54,1 M5 4,3 59,6 33,8 24,05 4,0 63,5 84
1) Weight without insulator
CA20L-B designates a receptacle for rear panel mounting
with solder pin contacts to solder into printed circuits. All
pattern drawings upon request. For all other dimensions see
above table.
For contact arrangements with #16 and #12 contacts only.
Style B2
Mod. -05
30 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Thru-Bulkhead Receptacle
VG 95234 Style C1 resp. TBF-B (with threaded holes)
VG 95234 Style C2 resp TBF-B-05 (with flange through holes)
TBF-B designates a bulkhead receptacle with mounting flange.
Modifications see page 9
VG95234 Cannon d2d2el
1l2l3l4Weight1)
Part no. Part no. C1 C2 –0,15 ±0,1 ±0,7 +0,3 ±0,2 ±0,3 g max.
H13
VG95234XX-10SL-* TBF10SL-*B-*** M4 3,2 18,2 18,2 37,5 14,2 2,8 25,4 17
– TBF12S-*B-*** M4 3,2 21,4 20,6 37,5 14,2 3,2 28,0 24
VG95234XX-14S-* TBF14S-*B-*** M4 3,2 24,6 23,0 37,5 14,2 3,2 30,0 29
CG95234XX-16S-* TBF16S-*B-*** M4 3,2 27,4 24,6 37,5 14,2 3,2 32,5 34
VG95234XX-16-* TBF16-*B-*** M4 3,2 27,4 24,6 51,4 19,0 3,2 32,5 41
VG95234XX-18-* TBF18-*B-*** M4 3,2 30,8 27,0 51,4 19,0 4,0 35,0 49
VG95234XX-20-* TBF20-*B-*** M4 3,2 34,2 29,4 51,4 19,0 4,0 38,0 56
VG95234XX-22-* TBF22-*B-*** M4 3,2 37,4 31,8 51,4 19,0 4,0 41,0 61
VG95234XX-24-* TBF24-*B-*** M4 3,7 40,9 34,9 51,4 20,6 4,0 44,5 65
VG95234XX-28-* TBF28-*B-*** M5 3,7 46,7 39,7 51,4 20,6 4,0 50,8 76
VG95234XX-32-* TBF32-*B-*** M5 4,3 53,4 44,5 51,4 22,2 4,0 57,0 92
VG95234XX-36-* TBF36-*B-*** M5 4,3 59,6 49,2 51,4 22,2 4,0 63,5 103
1) Weight without insulator, grommets and contacts.
Straight Plug
CA3106E-B designates a straight plug with endbell,
cable clamp and telescoping bushing
VG 95234 Style Dresp.
CA3106E-B and Modifications, see page 9
VG95234 Cannon d1d22) l1l2l3l4Weight1)
Part no. Part no. max. max. max. max. max. max. g max.
VG95234D-10SL-* CA3106E10SL-**B-*** 22,8 6,5 115 55 22,7 22,7 30
CA3106E12S-**B-*** 26,0 6,5 115 55 22,7 22,7 37
VG95234D-14S-* CA3106E14S-**B-*** 29,2 9,0 115 60 27,5 27,5 44
VG95234D-16S-* CA3106E16S-**B-*** 32,0 11,0 115 60 30,0 30,0 54
VG95234D-16-* CA3106E16-**B-*** 32,0 11,0 120 70 30,0 30,0 62
VG95234D-18-* CA3106E18-**B-*** 36,5 14,2 120 75 33,0 33,0 70
VG95234D-20-* CA3106E20-**B-*** 39,9 15,8 120 75 37,5 37,5 85
VG95234D-22-* CA3106E22-**B-*** 43,1 15,8 120 75 37,5 37,5 92
VG95234D-24-* CA3106E24-**B-*** 46,6 21,4 120 90 43,3 43,3 127
VG95234D-28-* CA3106E28-**B-*** 53,4 21,4 120 90 48,0 43,3 154
VG95234D-32-* CA3106E32-**B-*** 60,1 26,7 120 90 55,0 51,7 199
VG95234D-36-* CA3106E36-**B-*** 66,3 31,7 130 100 58,0 58,0 260
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
Style C2
Socket Pin
31
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Plug 90°
VG 95234 Style E1 (with flex tube)
CA 3108 F-B and Modifications, see page 9
CA3108E/F designates a plug 90°, which is available
with cable clamp and bushing (E) or with flex tube
termination (F)
VG 95234 Style E(with cable clamp and telescoping
bushing)
CA 3108E-B and Modifications, see page 9
VG 95 234 Cannon d3-Thread d1d22) l1l2l3l4l5Weight1)
Part no. Part no. Style E1 max. max. max. max. max. max. g
CA3108F E E1 E E E1
VG95234XX-10SL-* CA3108X10SL-**B-*** 5/8-24NEF-2A 22,8 6,5 45 42 30 100 22,7 9,4 37 27
– CA3108X12S-**B-*** 5/8-24NEF-2A 26,0 6,5 45 42 30 100 22,7 9,4 45 35
VG95234XX-14S-* CA3108X14S-**B-*** 3/4-20UNEF-2A 29,2 9,0 47 42 30 100 27,5 9,4 58 43
VG95234XX-16S-* CA3108X16S-**B-*** 7/8-20UNEF-2A 32,0 11,0 48 45 30 100 30,0 9,4 68 48
VG95234XX-16-* CA3108X16-**B-*** 7/8-20UNEF-2A 32,0 11,0 57 45 30 100 30,0 9,4 78 58
VG95234XX-18-* CA3108X18-**B-*** 1-20UNEF-2A 36,5 14,2 58 53 35 100 33,0 9,4 90 58
VG95234XX-20-* CA3108X20-**B-*** 1 3/16-18UNEF-2A 39,9 15,8 61 53 35 100 37,5 9,4 109 74
VG95234XX-22-* CA3108X22-**B-*** 1 3/16-18UNEF-2A 43,1 15,8 61 53 35 100 37,5 9,4 113 78
VG95234XX-24-* CA3108X24-**B-*** 1 7/16-18UNEF-2A 46,6 21,4 66 58 40 100 43,3 9,4 159 104
VG95234XX-28-* CA3108X28-**B-*** 1 7/16-18UNEF-2A 53,4 21,4 66 58 40 100 43,3 9,4 181 126
VG95234XX-32-* CA3108X32-**B-*** 1 3/4 -18UNS-2A 60,1 26,7 72 66 45 110 51,7 11,0 245 160
VG95234XX-36-* CA3108 36-**B-*** 2 -18UNS-2A 66,3 31,7 75 69 50 110 58,0 12,6 300 190
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
Straight Plug
VG 95234 Style F
CA3101E-B designates a cable connection plug
with cable clamp and and telescoping bushing
CA 3101E-B and Modifications, see page 9
VG 95234 Cannon d1d22) d3l1l2l3l4l5l7Weight1)
Part no. Part no. max. -0,15 max. ±0,1 ±0,2 max. ±0,2 max. g max.
VG95234F-10SL-* CA3101E10SL-**B-*** 25,2 6,5 18,2 57 16,6 2,8 120 20,6 22,7 35
– CA3101E12S-**B-*** 27,8 6,5 21,4 57 16,6 3,2 120 23,6 22,7 43
VG95234F-14S-* CA3101E14S-**B-*** 29,8 9,0 24,6 59 16,6 3,2 120 25,4 27,5 50
VG95234F-16S-* CA3101E16S-**B-*** 32,3 11,0 27,4 60 16,6 3,2 120 28,6 30,0 60
VG95234F-16-* CA3101E16-**B-*** 32,3 11,0 27,4 68 23,9 3,2 125 28,6 30,0 65
VG95234F-18-* CA3101E18-**B-*** 34,8 14,2 30,8 72 23,9 4,0 125 31,7 33,0 80
VG95234F-20-* CA3101E20-**B-*** 37,8 15,8 34,2 72 23,9 4,0 125 34,9 37,5 95
VG95234F-22-* CA3101E22-**B-*** 41,1 15,8 37,4 72 23,9 4,0 125 38,1 37,5 105
VG95234F-24-* CA3101E24-**B-*** 44,6 21,4 40,9 78 23,9 4,0 125 41,3 43,3 140
VG95234F-28-* CA3101E28-**B-*** 50,9 21,4 46,7 79 23,9 4,0 125 47,6 43,3 160
VG95234F-32-* CA3101E32-**B-*** 57,1 26,7 53,4 78 23,9 4,0 125 54,0 51,7 205
VG95234F-36*)-* CA3101E36*)-**B-*** 63,6 31,7 59,6 78 23,9 4,0 135 60,6 58,0 270
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
*) For contact insert 36-5P a support washer is included.
VG/CA
E1/F VG
E
32 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Straight Plug
VG95234 – Style G
CA3106E-B, -02, -03 or -06 designates a
straight plug with adapter for heat shrinkable boots
CA3106E-B and Modificationes, see page 9
VG 95234 Cannon d1d2d3d4d5l1l2Weight1)
Part no. Part no. max. ±0,2 ±0,2 max. min. max. ±0,5 g max.
VG95234G-10SL-* CA3106E10SL-**B-*** 22,8 17,0 15,5 13,3 7,7 50 11,7 24
– CA3106E12S-**B-*** 26,0 17,8 15,5 13,3 7,9 50 11,7 35
VG95234G-14S-* CA3106E14S-**B-*** 29,2 20,1 19,1 17,0 10,6 50 11,7 41
VG95234G-16S-* CA3106E16S-**B-*** 32,0 23,5 23,9 21,9 13,5 50 11,7 51
VG95234G-16-* CA3106E16-**B-*** 32,0 23,5 23,9 21,9 13,5 60 11,7 58
VG95234G-18-* CA3106E18-**B-*** 36,5 26,5 23,9 21,9 14,6 60 11,7 65
VG95234G-20-* CA3106E20-**B-*** 39,9 30,2 29,6 26,2 18,7 65 12,7 75
VG95234G-22-* CA3106E22-**B-*** 43,1 33,6 29,6 26,2 20,8 65 12,7 80
VG95234G-24-* CA3106E24-**B-*** 46,6 38,1 37,8 34,5 24,6 65 12,7 95
VG95234G-28-* CA3106E28-**B-*** 53,4 41,4 37,8 34,5 27,0 65 12,7 120
VG95234G-32-* CA3106E32-**B-*** 60,1 48,6 47,8 43,6 33,3 70 15,2 165
VG95234G-36-* CA3106E36-**B-*** 66,3 54,8 47,8 43,6 38,5 80 15,2 180
1) Weight without insulator, grommets and contacts.
Straight Plug
VG95234 Style H
CA3106-F-B designates a straight plug for flex tube
CA3106-B and Modifications, see page 9
VG 95234 Cannon d3-Thread d1d2a2) l1l2Weight1)
Part no. Part no. max. max. min. g max.
VG95234H-10SL-* CA3106F10SL-**B-*** 5/8-24NEF-2A 22,8 8,2 50 9,5 21
– CA3106F12S-**B-*** 5/8-24NEF-2A 26,0 8,2 50 9,5 29
VG95234H-14S-* CA3106F14S-**B-*** 3/4-20UNEF-2A 29,2 11,1 50 9,5 33
VG95234H-16S-* CA3106F16S-**B-*** 7/8-20UNEF-2A 32,0 14,3 50 9,5 42
VG95234H-16-* CA3106F16-**B-*** 7/8-20UNEF-2A 32,0 14,3 60 9,5 51
VG95234H-18-* CA3106F18-**B-*** 1-20UNEF-2A 36,5 16,7 60 9,5 59
VG95234H-20-* CA3106F20-**B-*** 1 3/16-18UNEF-2A 39,9 19,8 60 9,5 59
VG96234H-22-* CA3106F22-**B-*** 1 3/16-18UNEF-2A 43,1 19,8 60 9,5 62
VG95234H-24-* CA3106F24-**B-*** 1 7/16-18UNEF-2A 46,6 25,4 65 9,5 84
VG95234H-28-* CA3106F28-**B-*** 1 7/16-18UNEF-2A 53,4 27,0 65 9,5 100
VG95234H-32-* CA3106F32-**B-*** 1 3/4-18UNS-2A 60,1 32,5 65 11,0 116
VG95234H-36-* CA3106F36-**B-*** 2-18UNS-2A 66,3 35,7 80 11,8 142
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
Cannon VG/CA-Bayonet
33
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Wall Mounting Receptacle
for rear mounting
VG95234 Style J1(with threaded holes in flange)
VG95234 Style J2(with through holes in flange)
CA3100E-B and Modifications e g -05
(with through holes)
CA3100E-B designates a wall mounting
receptacle with cable clamp and telescoping
bushing
CA3100E-B and Modifications e g -01, -F80
(for ordered contacts)
VG95234 Cannon d1d21) d3l1l2l3l4l5
Part no. Part no. -0,15 J1 J2 max. +0,4 ±0,2 ±0,3 max.
VG95234*XX-10SL-* CA3100E10SL-**-B-*** 18,2 6,5 M4 3,2 57 18,2 2,8 25,4 120
– CA3100E12S-**-B-*** 21,4 6,5 M4 3,2 57 18,2 3,2 28,0 120
VG95234*XX-14S-* CA3100E14S-**-B-*** 24,6 9,0 M4 3,2 59 18,2 3,2 30,0 120
VG95234*XX-16S-* CA3100E16S-**-B-*** 27,4 11,0 M4 3,2 60 18,2 3,2 32,5 120
VG95234*XX-16-* CA3100E16-**-B-*** 27,4 11,0 M4 3,2 68 21,5 3,2 32,5 125
VG95234*XX-18-* CA3100E18-**-B-*** 30,8 14,2 M4 3,2 72 23,05 4,0 35,0 125
VG95234*XX-20-* CA3100E20-**-B-*** 34,2 15,8 M4 3,2 72 23,05 4,0 38,0 125
VG95234*XX-22-* CA3100E22-**-B-*** 37,4 15,8 M4 3,2 72 23,05 4,0 41,0 125
VG95234*XX-24-* CA3100E24-**-B-*** 40,9 21,4 M4 3,7 78 23,05 4,0 44,5 125
VG95234*XX-28-* CA3100E28-**-B-*** 46,7 21,4 M5 3,7 79 24,05 4,0 50,8 125
VG95234*XX-32-* CA3100E32-**-B-*** 53,4 26,7 M5 4,3 78 24,05 4,0 57,0 125
VG95234*XX-36-* CA3100E36-**-B-*** 59,6 31,7 M5 4,3 78 24,05 4,0 63,5 135
1) For max. cable entry.
Plug 90°, Shielded
VG95234 Style K
CA3108F-B-13, -14 or -15 designates a shielded plug
with 90° endbell for flex tube
CA3108F and Modifications, see page 9
VG96234 Cannon d3-Thread d1l1l2l3Weight1)
Part no. Part no. max. max. max. min. g max.
– CA3108F10SL-**-B-*** 5/8-24UNEF-2A 22,8 45 22 9,4 27
VG95234K-12S-* CA3108F12S-**-B-*** 5/8-24UNEF-2A 26,0 45 22 9,4 35
VG95234K-14S-* CA3108F14S-**-B-*** 3/4-20UNEF-2A 29,2 47 24 9,4 43
VG95234K-16S-* CA3108F16S-**-B-*** 7/8-20UNEF-2A 32,0 48 25 9,4 48
VG95234K-16-* CA3108F16-**-B-*** 7/8-20UNEF-2A 32,0 57 25 9,4 58
VG95234K-18-* CA3108F18-**-B-*** 1-20UNEF-2A 36,5 58 27 9,4 58
VG95234K-20-* CA3108F20-**-B-*** 1 3/16-18UNEF-2A 39,9 61 29 9,4 74
VG95234K-22-* CA3108F22-**-B-*** 1 3/16-18UNEF-2A 43,1 61 30 9,4 78
VG95234K-24-* CA3108F24-**-B-*** 1 7/16-18UNEF-2A 46,6 66 32 9,4 104
VG95234K-28-* CA3108F28-**-B-*** 1 7/16-18UNEF-2A 53,4 66 34 9,4 126
CG95234K-32-* CA3108F32-**-B-*** 1 3/4-18UNS-2A 60,1 72 39,5 11,0 160
VG95234K-36-* CA3108F36-**-B-*** 2-18UNS-2A 66,3 75 45 12,6 190
1) Weight without insulator, grommets and contacts.
34 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Straight Plug, shielded
VG95234 Style L
CA3106F-B-13, -14 or -15 designates a straight plug
with endbell for flex tube
CA3106F-B and Modifications, see page 9
VG95234 Cannon d3-Thread d1d22) l1l2Weight1)
Part no. Part no. max. min. g max.
VG95234L-10SL-* CA3106F10SL-**-B-*** 5/8-24UNEF-2A 22,8 8,2 50 9,5 21
VG95234L-12S-* CA3106F12S-**-B-*** 5/8-24UNEF-2A 26,0 8,2 50 9,5 29
VG95234L-14S-* CA3106F14S-**-B-*** 3/4-20UNEF-2A 29,2 11,1 50 9,5 33
VG95234L-16S-* CA3106F16S-**-B-*** 7/8-20UNEF-2A 32,0 14,3 50 9,5 42
VG95234L-16-* CA3106F-16-**-B-*** 7/8-20UNEF-2A 32,0 14,3 60 9,5 51
VG95234L-18-* CA3106F-18-**-B-*** 1-20UNEF-2A 36,5 16,7 60 9,5 59
VG95234L-20-* CA3106F-20-**-B-*** 1 3/16-18UNEF-2A 39,9 19,8 60 9,5 58
VG95234L-22-* CA3106F-22-**-B-*** 1 3/16-18UNEF-2A 43,1 19,8 60 9,5 62
VG95234L-24-* CA3106F-24-**-B-*** 1 7/16-18UNEF-2A 46,6 25,4 65 9,5 84
VG95234L-28-* CA3106F-28-**-B-*** 1 7/16-18UNEF-2A 53,4 27,0 65 9,5 100
VG95234L-32-* CA3106F-32-**-B-*** 1 3/4-18UNS-2A 60,1 32,5 65 11,0 116
VG95234L-36-* CA3106F-36-**-B-*** 2-18UNS-2A 66,3 35,7 80 11,8 142
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
Straight Plug, shielded
VG95234 Style M
CA3106E-B-13, -14 or -15 designates a straight,
shielded plug with endbell for shielded braids, and
heat shrinkable boots
CA3106E-B and Modifications, see page 9
VG95234 Cannon d1d22) d3d4l1l2l3Weight1)
Part no. Part no. max. min. ±0,5 max. max. +1 ±0,5 g max.
VG95234M-10SL-* CA3106E10SL-**-B-*** 22,8 7,7 18,5 16,3 55,0 17,0 7,0 40
– CA3106E12S-**-B-*** 26,0 9,3 20,0 17,0 55,0 17,0 7,0 42
VG95234M-14S-* CA3106E14S-**-B-*** 29,2 10,6 22,0 20,0 55,0 17,0 7,0 45
VG95234M-16S-* CA3106E16S-**-B-*** 32,0 13,5 25,0 23,0 60,0 18,0 8,0 55
VG95234M-16-* CA3106E16-**-B-*** 32,0 13,5 25,0 23,0 70,0 18,0 8,0 65
VG95234M-18-* CA3106E18-**-B-*** 36,5 14,6 28,0 24,5 70,0 18,0 8,0 75
VG95234M-20-* CA3106E20-**-B-*** 39,9 18,5 32,0 28,5 70,0 18,0 10,0 85
VG95234M-22-* CA3106E22-**-B-*** 43,1 20,8 34,0 30,5 70,0 18,0 10,0 100
VG95234M-24-* CA3106E24-**-B-*** 46,6 24,6 38,0 34,5 70,0 18,0 10,0 115
VG95234M-28-* CA3106E28-**-B-*** 53,4 27,0 41,0 37,5 70,0 18,0 10,0 130
VG95234M-32-* CA3106E32-**-B-*** 60,1 33,3 48,0 44,0 70,0 18,0 10,0 170
VG95234M-36-* CA3106E36-**-B-*** 66,3 38,5 55,0 51,0 80,0 18,0 10,0 190
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
Cannon VG/CA-Bayonet
VG95234 Cannon d1d2d3d42) d5el
1l2l3l4Weight1)
Part no. Part no. Thread H13 ±0,5 g
-0,15 N1 N2 min. max. ±0,1 max. +0,4 ±0,2 +0,3 max.
VG95234*XX-10SL-* CA3100E10SL-**-B-*** 18,2 M4 3,2 18,5 7,7 16,3 18,2 55 18,2 2,8 25,4 45
VG95234*XX-14S-* CA3100E14S-**-B-*** 24,6 M4 3,2 22,0 10,6 20,0 23,0 58 18,2 3,2 30,0 55
VG95234*XX-16S-* CA3100E16S-**-B-*** 27,4 M4 3,2 25,0 13,5 23,0 24,6 70 18,2 3,2 32,5 65
VG95234*XX-16-* CA3100E16-**-B-*** 27,4 M4 3,2 25,0 13,5 23,0 24,6 70 21,5 3,2 32,5 75
VG95234*XX-18-* CA3100E18-**-B-*** 30,8 M4 3,2 28,0 14,6 24,5 27,0 70 23,05 4,0 35,0 85
VG95234*XX-20-* CA3100E20-**-B-*** 34,2 M4 3,2 32,0 18,5 28,5 29,4 70 23,05 4,0 38,4 95
VG95234*XX-22-* CA3100E22-**-B-*** 37,4 M4 3,2 34,0 20,8 30,5 31,8 70 23,05 4,0 41,0 105
VG95234*XX-24-* CA3100E24-**-B-*** 40,9 M4 3,7 38,0 24,6 34,5 34,9 70 23,05 4,0 44,5 120
VG95234*XX-28-* CA3100E28-**-B-*** 46,7 M5 3,7 41,0 27,0 37,5 39,7 70 24,05 4,0 50,8 150
VG95234*XX-32-* CA3100E32-**-B-*** 53,4 M5 4,3 48,0 33,3 44,0 44,5 75 24,05 4,0 57,0 190
VG95234*XX-36-* CA3100E36-**-B-*** 59,6 M5 4,3 55,0 38,5 51,0 49,2 85 24,05 4,0 63,5 220
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
35
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Wall Mounting Receptacle
VG95234 Style N1 (with threaded holes in flange)
VG95234 Style N2 (with through holes in flange)
CA3100E-B , -13, -14 or -15, -05-13, -05-14 or -05-15
designates a shielded receptacle with endbell for
shielded braids, and also for heat shrinkable boots
CA3100E-B and Modifications, see page 9 /Mod.-05
Straight Plug
VG95234 Style R1 (for system cable according to
MTV6145-005)
CA3106E-B, -32-DXX designates
a straight plug, shielded, with endbell for system
cable acc. MTV6145-005.
(DXX means cable entry diameter)
CA3106E-B and Modification, see page 9
VG95234 Cannon d1d3d4d5d6d7l1l2Weight1)
Part no. Part no. g max.
VG95234R1-14S CA3106E14S-**-B-32 29,2 10,0 14,0 M 20x1 21,0 23,5 57 21,0 50
VG95234R1-16S CA3106E16S-**-B-32 32,0 10,0 14,0 M 20x1 21,0 23,5 57 21,0 60
– CA3106E16S-**-B-32-D12 32,0 12,2 16,0 M 22x1 23,0 25,5 57 21,0 60
VG95234R1-18 CA3106E18-**-B-32 36,5 12,2 16,0 M 22x1 23,0 25,5 66 21,0 80
VG95234R1-20 CA3106E20-**-B-32 39,9 13,4 18,0 M 27x1 26,6 30,5 68 21,0 90
– CA3106E20-**-B-32-D19 39,9 19,6 22,6 M 27x1 31,5 35,5 68 21,0 90
VG95234R1-28 CA3106E28-**-B-32 53,4 19,0 26,0 M 35x1 37,6 41,5 76 26,0 135
– CA3106E28-**-B-32-D22 53,4 23,0 26,5 M 35x1 37,6 41,5 76 26,0 135
VG95234R1-32 CA3106E32-**-B-32 60,1 21,0 26,5 M 35x1 37,5 41,5 79 26,0 175
– CA3106E32-**-B-32-D22 60,3 23,0 26,5 M 35x1 37,5 41,5 82 26,0 200
– CA3106E36-**-B-32-D22 66,3 23,0 26,5 M 42x1 37,5 41,5 82 26,0 200
– CA3106E36-**-B-32-D26 66,3 27,0 33,0 M 42x1 45,0 49,7 82 26,0 200
1) Weight without insulator, grommets and contacts.
VG95234 Cannon d1d2d3d4d5el
1l2l3l4l5
Part no. Part no. –0,15 Thread H13 ±0,3 ±0,1 max. ±0,4 ±0,2 ±0,3 max.
VG95234S1-14S CA3100E14S-**-B-*** 24,6 M4 3,2 21,0 23,5 10,0 23,0 61 18,2 3,2 30,0 21,0
VG95234S1-16S CA3100E16S-**-B-*** 27,4 M4 3,2 21,0 23,5 10,0 24,6 61 18,2 3,2 32,5 21,0
VG95234S1-18 CA3100E18-**-B-*** 30,8 M4 3,2 23,0 25,5 12,2 27,0 70 23,05 4,0 35,0 21,0
VG95234S1-20 CA3100E20-**-B-*** 34,2 M4 3,2 26,6 30,5 13,4 29,4 72 23,05 4,0 38,0 21,0
VG95234S1-28 CA3100E28-**-B-*** 46,7 M5 3,7 37,5 41,5 19,0 39,7 78 24,05 4,0 50,8 26,0
VG95234S1-32 CA3100E32-**-B-*** 53,4 M5 4,3 37,5 41,5 21,0 44,5 81 24,05 4,0 57,0 26,0
36 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Wall Mounting Receptacle
VG95234 Style S1 (with thread holes in flange)
CA3100E-B, -32, -32-05 designates a wall
mounting receptacle, shielded, with endbell
for system cable acc. MTV 6145-005.
CA3100E-B and Modification, see page 9
Mod. -05
Straight Plug, Shielded with Adapter for
Heat Shrink Boots
VG95234 Style T
CA3106E-B, 02-41, 03-41, 06-41 designates a straight
plug, shielded, with endbell for heat shrink boot.
CA3106E-B and Modification, see page 9
VG 95234 Cannon d1d2d3d4d5l1l2Weight1)
Part no. Part no. max. ±0,2 ±0,2 max. min. max. ±0,5 g max.
VG95234T-10SL-* CA3106E10SL-**B-*** 22,8 17,0 15,5 13,3 7,7 50 11,7 24
– CA3106E12S-**B-*** 26,0 17,8 15,5 13,3 7,9 50 11,7 35
VG95234T-14S-* CA3106E14S-**B-*** 29,2 20,1 19,1 17,0 10,6 50 11,7 41
VG95234T-16S-* CA3106E16S-**B-*** 32,0 23,5 23,9 21,9 13,5 50 11,7 51
VG95234T-16-* CA3106E16-**B-*** 32,0 23,5 23,9 21,9 13,5 60 11,7 58
VG95234T-18-* CA3106E18-**B-*** 36,5 26,5 23,9 21,9 14,6 60 11,7 65
VG95234T-20-* CA3106E20-**B-*** 39,9 30,2 29,6 26,2 18,7 65 12,7 75
VG95234T-22-* CA3106E22-**B-*** 43,1 33,6 29,6 26,2 20,8 65 12,7 80
VG95234T-24-* CA3106E24-**B-*** 46,6 38,1 37,8 34,5 24,6 65 12,7 95
VG95234T-28-* CA3106E28-**B-*** 53,4 41,4 37,8 34,5 27,0 65 12,7 120
VG95234T-32-* CA3106E32-**B-*** 60,1 48,6 47,8 43,6 33,3 70 15,2 165
VG95234T-36-* CA3106E36-**B-*** 66,3 54,8 47,8 43,6 38,5 80 15,2 180
1) Weight without insulator, grommets and contacts.
37
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Wall Mounting Receptacle
VG95234 Style U1 (with threaded holes in flange)
VG95234 Style U2 (with through holes in flange)
CA3100E-B-02-05, -03-05 or -05-06, -02-03 or -06
designates a wall mounting receptacle with adapter
for heat shrinkable boots
CA3100E-B and Modifications, see page 9
VG95234 Cannon d1d2d3d4d5el
1l2l3l4Weight1)
Part no. Part no. -0,15 Thread H13 ±0,2 max. ±0,1 max. +0,4 ±0,2 ±0,3 g max.
VG95234U1-10SL-* CA3100E10SL-**-B-*** 18,2 M4 3,2 15,5 7,7 13,3 18,2 57 18,2 2,8 25,4 35
– CA3100E12S-**-B-*** 21,4 M4 3,2 15,5 7,9 13,3 20,6 57 18,2 3,2 28,0 45
VG95234U1-14S-* CA3100E14S-**-B-*** 24,6 M4 3,2 19,1 10,6 17,0 23,0 57 18,2 3,2 30,0 50
VG95234U1-16S-* CA3100E16S-**-B-*** 27,4 M4 3,2 23,9 13,5 21,9 24,6 57 18,2 3,2 32,5 60
VG95234U1-16-* CA3100E16-**-B-*** 27,4 M4 3,2 23,9 13,5 21,9 24,6 63 21,5 3,2 32,5 65
VG95234U1-18-* CA3100E18-**-B-*** 30,8 M4 3,2 23,9 14,6 21,9 27,0 65 23,05 4,0 35,0 80
VG95234U1-20-* CA3100E20-**-B-*** 34,2 M4 3,2 29,6 18,7 26,2 29,4 68 23,05 4,0 38,0 95
VG95234U1-22-* CA3100E22-**-B-*** 37,4 M4 3,2 29,6 20,8 26,2 31,8 68 23,05 4,0 41,0 105
VG95234U1-24-* CA3100E24-**-B-*** 40,9 M4 3,7 37,8 24,6 34,5 34,9 70 23,05 4,0 44,5 140
VG95234U1-28-* CA3100E28-**-B-*** 46,7 M5 3,7 37,8 27,0 34,5 39,7 71 24,05 4,0 50,8 160
VG95234U1-32-* CA3100E32-**-B-*** 53,4 M5 4,3 47,8 33,3 43,6 44,5 74 24,05 4,0 57,0 205
VG95234U1-36-* CA3100E36-**-B-*** 59,6 M5 4,3 47,8 38,5 43,6 49,2 74 24,05 4,0 63,5 270
1) Weight without insulator, grommets and contacts.
Straight Plug
VG95234 Style V
CA3101E-B, -02, -03 or -06 designates a cable
connection plug with adapter for heat shrinkable boots
CA3101E-B and Modifications, see page 9
VG95234 Cannon d1d22) d3d4d5l1l2l3l4l5Weight1)
Part no. Part no. -0,15 min. ±0,2 max. max. max. +0,4 ±0,2 ±0,5 g max.
VG95234V-10SL-* CA3101E10SL-**-B-*** 18,2 7,7 15,5 25,2 13,3 57 18,2 2,8 11,7 20,6 35
CA3101E12S-**-B-*** 21,4 7,9 15,5 27,8 13,3 57 18,2 3,2 11,7 23,6 45
VG95234V-14S-* CA3101E14S-**-B-*** 24,6 10,6 19,1 29,8 17,0 57 18,2 3,2 11,7 25,4 50
VG95234V-16S-* CA3101E16S-**-B-*** 27,4 13,5 23,9 32,3 21,9 57 18,2 3,2 11,7 28,6 60
VG95234V-16-* CA3101E16-**-B-*** 27,4 13,5 23,9 32,3 21,9 63 21,5 3,2 11,5 28,6 65
VG95234V-18-* CA3101E18-**-B-*** 30,8 14,6 23,9 34,8 21,9 65 23,05 4,0 11,5 31,7 80
VG95234V-20-* CA3101E20-**-B-*** 34,2 18,7 29,6 37,8 26,2 68 23,05 4,0 12,7 34,9 95
VG95234V-22-* CA3101E22-**-B-*** 37,4 20,8 29,6 41,1 26,2 68 23,05 4,0 12,7 38,1 105
VG95234V-24-* CA3101E24-**-B-*** 40,9 24,6 37,8 44,6 34,5 70 23,05 4,0 12,7 41,3 140
VG95234V-28-* CA3101E28-**-B-*** 46,7 27,0 37,8 50,9 34,5 71 24,05 4,0 12,7 47,6 160
VG95234V-32-* CA3101E32-**-B-*** 53,4 33,3 47,8 57,1 43,6 74 24,05 4,0 15,2 54,0 205
VG95234V-36-* CA3101E36-**-B-*** 59,6 38,5 47,8 63,6 43,6 74 24,05 4,0 15,2 60,6 270
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
Cannon d1d2d32) el
1l2l3l4l5l6l7Weight1)
Part no. -0,15 Thread H13 max. ±0,4 max. +0,4 ±0,2 max. max. max. max. g max.
Mod. Mod.
08 09
CA3100E10SL-**-B-*** 18,2 M4 3,2 6,5 18,2 50 18,2 2,8 25,4 42 22,7 100 50
CA3100E12S-**-B-*** 21,4 M4 3,2 6,5 20,6 50 18,2 3,2 28,0 42 22,7 100 60
CA3100E14S-**-B-*** 24,6 M4 3,2 9,0 23,0 52 18,2 3,2 30,0 42 27,5 100 70
CA3100E16S-**-B-*** 27,4 M4 3,2 11,0 24,6 53 18,2 3,2 32,5 45 30,0 100 80
CA3100E16-**-B-*** 27,4 M4 3,2 11,0 24,6 60 21,5 3,2 32,5 45 30,0 100 90
CA3100E18-**-B-*** 30,8 M4 3,2 14,2 27,0 62 23,05 4,0 35,0 53 33,0 100 100
CA3100E20-**-B-*** 34,2 M4 3,2 15,8 29,4 66 23,05 4,0 38,0 53 37,5 100 120
CA3100E22-**-B-*** 37,4 M4 3,2 15,8 31,8 66 23,05 4,0 41,0 53 37,5 100 130
CA3100E24-**-B-*** 40,9 M4 3,7 21,4 34,9 69 23,05 4,0 44,5 58 43,3 100 170
CA3100E28-**-B-*** 46,7 M5 3,7 21,4 39,7 70 24,05 4,0 50,8 58 43,3 100 200
CA3100E32-**-B-*** 53,4 M5 4,3 26,7 44,5 74 24,05 4,0 57,0 66 51,7 110 265
CA3100E36-**-B-*** 59,6 M5 4,3 31,7 49,2 78 24,05 4,0 63,5 69 58,0 110 325
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
38 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Wall Mounting Receptacle
CA3100F-B-08 (Flange with threated holes)
CA3100F-B-09 (Flange with through holes)
CA3100F-B, -08, -09 designates a wall mounting
receptacle with 90° endbell and for protective hose
Modifications see page 9
Cannon d1d2d3el
1l2l3l4l5l6Weight1)
Part no. -0,15 Thread H13 Thread ±0,1 max. +0,4 ±0,2 ±0,3 min. max. g max.
CA3100F10SL-**-B-*** 18,2 M4 3,2 5/8-24UNEF-2A 18,2 50 18,2 2,8 25,4 9,4 30 47
CA3100F12S-**-B-*** 21,4 M4 3,2 5/8-24UNEF-2A 20,6 50 18,2 3,2 28,0 9,4 30 57
CA3100F14S-**-B-*** 24,6 M4 3,2 3/4-20UNEF-2A 23,0 52 18,2 3,2 30,0 9,4 30 57
CA3100F16S-**-B-*** 27,4 M4 3,2 7/8-20UNEF-2A 24,6 53 18,2 3,2 32,5 9,4 30 75
CA3100F16-**-B-*** 27,4 M4 3,2 7/8-20UNEF-2A 24,6 60 21,5 3,2 32,5 9,4 30 85
CA3100F18-**-B-*** 30,8 M4 3,2 1-20UNEF-2A 27,0 62 23,05 4,0 35,0 9,4 35 95
CA3100F20-**-B-*** 34,2 M4 3,2 1 3/16-18UNEF-2A 29,4 66 23,05 4,0 38,0 9,4 35 115
CA3100F22-**-B-*** 37,4 M4 3,2 1 3/16-18UNEF-2A 31,8 66 23,05 4,0 41,0 9,4 35 125
CA3100F24-**-B-*** 40,9 M4 3,7 1 7/16-18UNEF-2A 34,9 69 23,05 4,0 44,5 9,4 40 160
CA3100F28-**-B-*** 46,7 M5 3,7 1 7/16-18UNEF-2A 39,7 70 24,05 4,0 50,8 9,4 40 190
CA3100F32-**-B-*** 53,4 M5 4,3 1 3/4-18UNS-2A 44,5 74 24,05 4,0 57,0 11,0 45 250
CA3100F36-**-B-*** 59,6 M5 4,3 2-18UNS-2A 49,2 78 24,05 4,0 63,5 12,6 50 310
1) Weight without insulator, grommets and contacts.
Mod -09
Wall Mounting Receptacle
CA3100E-B-08 (Flange with threated holes)
CA3100E-B-09 (Flange with through holes)
CA3100E-B-08, -09 designates a wall mounting
receptacle, with 90° endbell, cable clamp and
telescoping bushing.
Modification see page 9
Cannon d1d2d32) d4el
1l2l3l4Weight1)
Part no. -0,15 Thread H13 min. max. ±0,1 max. +0,4 ±0,2 ±0,3 g max.
CA3100R10SL-**-B-*** 18,2 M4 3,2 9,6 22,0 18,2 50 18,2 2,8 25,4 40
CA3100R12S-**-B-*** 21,4 M4 3,2 10,3 23,0 20,6 52 18,2 3,2 28,0 50
CA3100R14S-**-B-*** 24,6 M4 3,2 12,4 27,0 23,0 52 18,2 3,2 30,0 60
CA3100R16S-**-B-*** 27,4 M4 3,2 15,4 28,0 24,6 58 18,2 3,2 32,5 70
CA3100R16-**-B-*** 27,4 M4 3,2 15,4 28,0 24,6 58 21,5 3,2 32,5 75
CA3100R18-**-B-*** 30,8 M4 3,2 18,4 31,0 27,0 65 23,05 4,0 35,0 90
CA3100R20-**-B-*** 34,2 M4 3,2 22,0 35,0 29,4 65 23,05 4,0 38,0 110
CA3100R22-**-B-*** 37,4 M4 3,2 24,7 38,0 31,8 65 23,05 4,0 41,0 125
CA3100R24-**-B-*** 40,9 M4 3,7 27,6 42,0 34,9 67 23,05 4,0 44,5 160
CA3100R28-**-B-*** 46,7 M5 3,7 31,6 49,0 39,7 67 24,05 4,0 50,8 190
CA3100R32-**-B-*** 53,4 M5 4,3 38,5 55,0 44,5 67 24,05 4,0 57,0 230
CA3100R36-**-B-*** 59,6 M5 4,3 44,5 62,0 49,2 67 24,05 4,0 63,5 300
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
39
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Straight Plug
CA3101F-B - designates a cable connection plug
for flex tube
CA3101F-B and Modifications, see page 9
Cannon d1d22) d3d4l1l2l3l4l5Weight1)
Part no. -0,15 min. Thread max. max. +0,4 ±0,2 min. ±0,2 g max.
CA3101F10SL-**-B-*** 18,2 8,2 5/8-24NEF-2A 25,2 52 18,2 2,8 9,5 20,6 35
CA3101F12S-**-B-*** 21,4 8,2 5/8-24NEF-2A 27,8 52 18,2 3,2 9,5 23,6 45
CA3101F14S-**-B-*** 24,6 11,1 3/4-20UNEF-2A 29,8 52 18,2 3,2 9,5 25,4 50
CA3101F16S-**-B-*** 27,4 14,3 7/8-20UNEF-2A 32,3 59 18,2 3,2 9,5 28,6 60
CA3101F16-**-B-*** 27,4 14,3 7/8-20UNEF-2A 32,3 59 21,5 3,2 9,5 28,6 65
CA3101F18-**-B-*** 30,8 16,7 1-20UNEF-2A 34,8 63 23,05 4,0 9,5 31,7 80
CA3101F20-**-B-*** 34,2 19,8 1 3/16-18UNEF-2A 37,8 63 23,05 4,0 9,5 34,9 95
CA3101F22-**-B-*** 37,4 19,8 1 3/16-18UNEF-2A 41,1 66 23,05 4,0 9,5 38,1 105
CA3101F24-**-B-*** 40,9 25,4 1 7/16-18UNEF-2A 44,6 69 23,05 4,0 9,5 41,3 140
CA3101F28-**-B-*** 46,7 27,0 1 7/16-18UNEF-2A 50,9 70 24,05 4,0 9,5 47,6 160
CA3101F32-**-B-*** 53,4 32,5 1 3/4-16UNS-2A 57,1 71 24,05 4,0 11,0 54,0 205
CA3101F36-**-B-*** 59,6 35,7 2-18UNS-2A 63,6 73 24,05 4,0 11,8 60,6 270
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
Wall Mounting Receptacles
CA3100R-B designates a wall mounting receptacle with
short endbell without cable clamp.
CA3100R-B and Modifications, see page 9
Mod -05
40 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Wall Mounting Receptacle
CA3100F-B designates a wall mounting receptacle with
straight endbell and protective hose.
CA3100F-B and Modifications, see page 9
Cannon d1d2d32) d4el
1l2l3l4l5Weight1)
Part no. -0,15 Thread +0,2 Thread ±0,1 max. +0,4 ±0,2 ±0,3 min. g max.
CA3100F10SL-**-B-*** 18,2 M4 3,2 8,2 5/8-24NEF-2A 18,2 52 18,2 2,8 25,4 9,5 40
CA3100F12S-**-B-*** 21,4 M4 3,2 8,2 5/8-24NEF-2A 20,6 52 18,2 3,2 28,0 9,5 50
CA3100F14S-**-B-*** 24,5 M4 3,2 11,1 3/4-20UNEF-2A 23,0 52 18,2 3,2 30,0 9,5 60
CA3100F16S-**-B-*** 27,4 M4 3,2 14,3 7/8-20UNEF-2A 24,6 59 18,2 3,2 32,5 9,5 70
CA3100F16-**-B-*** 27,4 M4 3,2 14,3 7/8-20UNEF-2A 24,6 59 21,5 3,2 32,5 9,5 75
CA3100F18-**-B-*** 30,8 M4 3,2 16,7 1-20UNEF-2A 27,0 63 23,05 4,0 35,0 9,5 90
CA3100F20-**-B-*** 34,2 M4 3,2 19,8 1 3/16-18UNEF-2A 29,4 63 23,05 4,0 38,0 9,5 110
CA3100F22-**-B-*** 37,4 M4 3,2 19,8 1 3/16-18UNEF-2A 31,8 66 23,05 4,0 42,0 9,5 125
CA3100F24-**-B-*** 40,9 M4 3,7 25,4 1 7/16-18UNEF-2A 34,9 69 23,05 4,0 44,5 9,5 160
CA3100F28-**-B-*** 46,7 M5 3,7 27,0 1 7/16-18UNEF-2A 39,7 70 24,05 4,0 50,8 9,5 190
CA3100F32-**-B-*** 53,4 M5 4,3 32,5 1 3/4-18UNS-2A 44,5 71 24,05 4,0 57,0 11,0 230
CA3100F36-**-B-*** 59,6 M5 4,3 35,7 2-18UNS-2A 49,2 73 24,05 4,0 63,5 11,8 300
1) Weight without insulator, grommets and contacts. 2) For max. cable entry.
Mod -05
41
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Straight Plug
CA3101R-B designates a cable connection plug with
short endbell, without cable clamp
CA3101R-B and Modification, see page 9
Cannon d1d2d3d4l1l2l3l5Weight1)
Part no. -0,15 min. max. max. max. +0,4 ±0,2 ±0,2 g max.
CA3101R10SL-**-B-*** 18,2 9,6 22,0 25,2 50 18,2 2,8 20,6 32
CA3101R12S-**-B-*** 21,4 10,3 23,0 27,8 52 18,2 3,2 23,6 40
CA3101R14S-**-B-*** 24,6 12,4 27,0 29,8 52 18,2 3,2 25,4 47
CA3101R16S-**-B-*** 27,4 15,4 28,0 32,3 58 18,2 3,2 28,6 55
CA3101R16-**-B-*** 27,4 15,4 28,0 32,3 58 21,5 3,2 28,6 60
CA3101R18-**-B-*** 30,8 18,4 31,0 34,8 65 23,05 4,0 31,7 75
CA3101R20-**-B-*** 34,2 22,0 35,0 37,8 65 23,05 4,0 34,9 90
CA3101R22-**-B-*** 37,4 24,7 38,0 41,1 65 23,05 4,0 38,1 100
CA3101R24-**-B-*** 40,9 27,6 42,0 44,6 67 23,05 4,0 41,3 135
CA3101R28-**-B-*** 46,7 31,6 49,0 50,9 67 24,05 4,0 47,6 155
CA3101R32-**-B-*** 53,4 38,5 55,0 57,1 67 24,05 4,0 54,0 200
CA3101R36-**-B-*** 59,6 44,5 62,0 63,6 67 24,05 4,0 60,6 260
1) Weight without insulator, grommets and contacts.
Straight Plug
CA3106R-B designates a straight plug with short endbell,
without cable clamp
CA3106R-B and Modification, see page 9
Cannon d1d21) d3l1Weight
Part no. max. max. max. g max.
CA3106R10SL-**-B-*** 22,8 9,6 22,0 50 27
CA3106R12S-**-B-*** 26,0 10,3 23,0 50 35
CA3106R14S-**-B-*** 29,2 12,4 27,0 50 40
CA3106R16S-**-B-*** 32,0 15,4 28,0 50 50
CA3106R16-**-B-*** 32,0 15,4 28,0 60 57
CA3106R18-**-B-*** 36,5 18,4 31,0 62 65
CA3106R20-**-B-*** 39,9 22,0 35,0 62 80
CA3106R22-**-B-*** 43,1 24,7 38,0 62 87
CA3106R24-**-B-*** 46,6 27,6 42,0 62 120
CA3100R28-**-B-*** 53,4 31,6 49,0 62 150
CA3106R32-**-B-*** 60,1 38,5 55,0 62 190
CA3106R36-**-B-*** 66,3 44,5 62,0 62 250
1) For max. cable entry.
42 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Jam Nut Receptacle
CA07A-B
Cannon Part no. d1d2d3 Thread (l1)l
2l3l4d4d5d6d7sw d8l5l6l7
CA07A10SL-**B-*** 35,0 8,2 7/8-20UNEF-2A 13,5 12,5 4,0 29,2 22,7 20,9 13,5 31,5 31,8 20,6 3,2 5,0 2,5
CA07A12S-**B-*** 38,1 8,2 1-20UNEF-2A 13,5 12,5 4,0 29,2 25,7 24,1 14,8 34,7 34,9 23,8 3,2 5,0 2,5
CA07A14S-**B-*** 41,3 11,1 1 1/8-18UNEF-2A 13,5 12,5 4,0 29,2 28,8 27,2 17,9 37,9 38,1 26,9 3,2 6,0 2,5
CA07A16S-**B-*** 44,4 14,3 1 1/4-18UNEF-2A 13,5 12,5 4,0 29,2 32,0 30,4 21,1 41,0 41,2 30,1 3,2 6,0 2,5
CA07A16-**B-*** 44,4 14,3 1 1/4-18UNEF-2A 13,5 21,0 4,0 37,7 32,0 30,4 21,1 41,0 41,2 30,1 3,2 6,0 2,5
CA07A18-**B-*** 48,2 16,7 1 3/8-18UNEF-2A 15,0 21,0 5,0 40,0 35,1 33,6 24,2 44,8 45,0 33,3 4,0 7,0 3,0
CA07A20-**B-*** 52,4 19,8 1 1/2-18UNEF-2A 15,0 21,0 5,0 40,0 38,2 36,8 28,2 49,0 49,2 36,5 4,0 7,0 3,0
CA07A22-**B-*** 55,5 19,8 1 5/8-18UNEF-2A 15,0 21,0 5,0 40,0 42,0 39,9 31,4 52,2 52,4 39,6 4,0 7,0 3,0
CA07A24-**B-*** 59,0 25,4 1 3/4-18UNEF-2A 15,0 21,0 5,0 40,0 44,7 43,1 34,5 55,0 55,2 41,2 4,0 7,0 3,0
CA07A28-**B-*** 66,0 27,0 2-18UNEF-2A 15,0 21,0 5,0 40,0 51,1 49,2 40,1 62,0 62,2 47,5 4,0 7,0 3,0
CA07A32-**B-*** 72,0 32,5 2 1/4-16UN-2A 15,0 21,0 5,0 40,0 57,4 55,7 46,5 68,0 68,2 54,1 4,0 7,0 3,0
CA07A36-**B-*** 80,0 35,7 1/2-16UN-2A 15,0 21,0 5,0 40,0 63,8 62,0 51,2 75,0 75,2 60,5 4,0 8,0 3,0
Straight Plug with PG Adapter
CA06PG-B
CA0GME-B
Cannon d1d3d4l1l2l3d2
Part no. PG-Thread
CA06PG10SL-**-B-*** 22,8 18,0 9,7 52 9,5 7,0 PG 9
CA06PG12S-**-B-*** 26,0 18,8 10,4 52 9,5 7,0 PG 9
CA06PG14S-**-B-*** 29,2 22,0 12,5 52 10,0 7,0 PG11
CA06PG16S-**-B-*** 32,0 23,6 15,0 54 10,0 7,0 PG13,5
CA06PG16-**-B-*** 32,0 24,0 15,0 64 10,0 7,0 PG13,5
CA06PG18-**-B-*** 36,5 24,4 17,0 69 11,5 7,5 PG13,5
CA06PG20-**-B-*** 39,9 26,8 17,0 70 11,5 7,5 PG16
CA06PG22-**-B-*** 42,1 26,4 17,0 73 11,5 7,5 PG16
CA06PG24-**-B-*** 46,6 26,8 18,5 74 12,5 7,5 PG16
CA06PG28-**-B-*** 53,4 32,0 18,5 74 12,5 7,5 PG21
CA06PG32-**-B-*** 60,1 40,8 24,0 76 13,5 8,5 PG29
CA06PG36-**-B-*** 66,3 40,8 32,0 87 15,0 9,0 PG29
Cannon d1d3d4l1l2l3d2
Part no. Metric
CA06ME10SL-**-B-*** 22,8 18,0 9,7 52 9,5 7,0 M16 X 1,5
CA06ME12S-**-B-*** 26,0 18,8 10,4 52 9,5 7,0 M16 X 1,5
CA06ME14S-**-B-*** 29,2 22,0 12,5 52 10,0 7,0 M20 X 1,5
CA06ME16S-**-B-*** 32,0 23,6 15,0 54 10,0 7,0 M20 X 1,5
CA06ME16-**-B-*** 32,0 24,0 15,0 64 10,0 7,0 M20 X 1,5
CA06ME18-**-B-*** 36,5 24,4 17,0 69 11,5 7,5 M25 X 1,5
CA06ME20-**-B-*** 39,9 26,8 17,0 70 11,5 7,5 M25 X 1,5
CA06ME22-**-B-*** 42,1 26,4 17,0 73 11,5 7,5 M32 X 1,5
CA06ME24-**-B-*** 46,6 26,8 18,5 74 12,5 7,5 M32 X 1,5
CA06ME28-**-B-*** 53,4 32,0 18,5 74 12,5 7,5 upon request
CA06ME32-**-B-*** 60,1 40,8 24,0 76 13,5 8,5 upon request
CA06ME36-**-B-*** 66,3 40,8 32,0 87 15,0 9,0 upon request
Coupling Dimensions
for connector style A, B1, B2, C1, C2, F, J1, J2, N1
and N2 resp. CA3100, CA3101, CA3102 and TBF
A = Contact size 10
B = Contact size 15S, 15, 16S, 16
C = Contact size 25, 12
D = Contact size 60, 100, 160, 500, 8.4, 0
E = Contact size 10
F = Contact size 15S, 16S
G = all others
Shell d1d2d3d4d5l1l2l3l4l5l6l7
size -0,15 +0,3 +0,4 +0,8 min. ±1 ±0,5 ±1 +0,2 +0,4 +0,1
A-1 B±1 C±1 D E F G -0,05
10SL 18,2 11,4 9,7+0,252,75 2,75 14,2 – 2,2 – – 12,8 – 2 – 1,8 4,4 6,3
–0,3
12S 21,4 14,2 10,8+0,252,75 2,75 14,2 – 2,2 – – 12,8 – 2 – 1,8 5,9 6,3
–0,3
14S 24,6 17,3 13,0+0,252,75 2,75 14,2 – 2,2 – – 12,8 – 2 – 1,8 6,9 6,3
–0,3
16S 27,4 20,6 16,1+0,252,75 2,75 14,2 – 2,2 – – 12,8 – 2 – 1,8 8,4 6,3
–0,3
16 27,4 20,6 16,1+0,254,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 8,4 9,6
–0,3
18 30,8 23,8 18,8±0,4 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 2,0 9,7 9,6
20 34,2 26,9 22,6±0,4 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 2,0 11,7 9,6
22 37,4 30,0 25,1±0,4 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 2,0 12,9 9,6
24 40,9 33,2 28,2±0,4 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 2,0 14,5 9,6
28 46,7 38,8 33,6±0,4 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 2,0 17,3 9,6
32 53,4 45,2 40,0±0,4 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 2,0 20,4 9,6
36 59,6 50,6 45,5±0,4 4,65 4,65 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 2,0 23,0 9,6
Coupling Dimensions
for connector style D, E, E1, G and H
resp. CA3106 und 3108
A = Contact size 10
B = Contact size 15S, 15, 16S, 16
C = Contact size 25, 12
D = Contact size 60, 100, 160, 500, 8, 4, 0
E = Contact size 10
F = Contact size 15S, 16S
G = all others
Shell d1d2d3d4d6l1l2l31) l4l5l8l9l10
size -0,15 -0,3 -0,1 ±0,2 ±1 ±0,5 ±1 +0,05 ±1 ±0,5 +0,1
A B C D E F G -0,1 -0,05
10SL 18,2 11,3 9,7+0,25 2,6 10,0+0,3 13,5 – 2,2 – – 12,8 – 2 – 1,6 11,8 14 2,1
–0,3
12S 21,4 14,0 10,8+0,25 2,6 11,4+0,6 13,5 – 2,2 – – 12,8 – 2 – 1,6 11,8 14 2,1
–0,3
14S 24,8 17,1 13,0+0,25 2,6 13,3+0,6 13,5 – 2,2 – – 12,8 – 2 – 1,6 11,8 14 2,1
–0,3
16S 27,6 20,4 16,1+0,25 2,6 16,4+0,6 13,5 – 2,2 – – 12,8 – 2 – 1,6 11,8 14 2,1
–0,3
16 27,6 20,4 16,1+0,25 4,5 16,4+0,6 18,2 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,6 16,0 18,8 2,1
–0,3
18 31,1 23,6 18,8±0,4 4,5 19,6+0,6 18,2 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 16,0 18,8 2,1
20 34,5 26,7 22,6±0,4 4,5 23,6+0,6 18,2 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 16,0 18,8 2,1
22 37,7 29,8 25,1±0,4 4,5 26,0+0,6 18,2 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 16,0 18,8 2,1
24 41,2 33,0 28,2±0,4 4,5 29,1+0,7 18,2 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 16,8 19,6 2,8
28 47,0 38,6 33,6±0,4 4,5 34,7+0,7 18,2 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 16,8 19,6 2,8
32 53,7 44,9 40,0±0,4 4,5 41,0+0,7 18,2 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 16,8 19,6 2,8
36 59,9 50,3 45,5±0,4 4,5 46,6+0,7 19 9,8 6,6 3 2,3 17,6 1,4 – 2,6 1,8 16,8 19,6 2,8
1) In terminated condition
Cannon VG/CA-Bayonet
43
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
44 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Part no. Protecting cap for
Receptacles Plugs ø A ø B ø D F G H
Shell size Shell size max. -0,2 +0,2 ±0,2 ±0,2 max.
025-8636-005 10S/10SL – 22,8 17,7 19,7 10,7 14,2 15,9
025-8636-006 – 10S/10SL 22,8 10,7 12,9 15,5 17,0 18,7
025-8636-008 – 12S 26,0 13,4 15,8 15,5 17,0 18,7
025-8636-010 12S/12 – 26,0 20,9 22,9 10,7 14,2 15,9
025-8636-016 14S/14 – 29,2 24,1 26,1 10,7 14,2 15,9
025-8636-017 – 14S 29,2 16,5 19,1 15,5 17,0 18,7
025-8636-018 – 14 29,2 16,5 19,1 20,2 21,7 23,4
025-8636-022 – 16S 32,0 19,8 22,4 15,5 17,0 18,7
025-8636-024 – 16 32,0 19,8 22,4 20,2 21,7 23,4
025-8636-025 16S – 32,0 26,9 28,9 10,7 14,2 15,9
025-8636-026 16 – 32,0 26,9 28,9 17,5 19,0 20,7
025-8636-034 18 – 36,5 30,3 32,3 17,5 19,0 20,7
025-8636-036 – 18 36,5 23,0 25,6 20,2 21,7 23,4
025-8636-042 20 – 39,9 33,7 35,7 17,5 19,0 20,7
025-8636-044 – 20 39,9 26,1 28,8 20,2 21,7 23,4
025-8636-048 – 22 43,1 29,2 31,9 20,2 21,7 23,4
025-8636-049 22 – 43,1 36,9 38,9 17,5 19,0 20,7
025-8636-053 24 – 46,6 40,4 42,4 19,1 20,6 22,3
025-8636-054 – 24 46,6 32,4 35,1 20,2 21,7 23,4
025-8636-058 28 – 53,4 46,2 48,2 19,1 20,6 22,3
025-8636-060 – 28 53,4 38,0 40,7 20,2 21,7 23,4
025-8636-061 – 32 60,1 44,3 47,2 20,2 21,7 23,4
025-8636-062 32 – 64,9 52,9 54,9 20,7 22,2 23,9
025-8636-064 36 – 71,1 59,1 60,1 20,7 22,2 23,9
025-8636-065 – 36 66,3 49,7 51,6 20,2 21,7 23,4
Mating Dimensions
for shell styles K, L and M, shown without coupling nut
Size d8
min.
14S 17,9
16S 21,2
16 21,2
18 24,4
20 27,6
Size d8
min.
22 30,7
24 33,9
28 39,5
32 46,0
36 51,4
Plastic Protecting Caps
Colour: red
(similar to RAL 2003)
45
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Metal Protecting Caps
for receptacles, shell style
3100, 3101 und 3102
Material: Aluminum alloy
Shell VG95234 VG95234 Cannon Cannon d1d2l1l2Weight
size Part no. Part no. Part no. Part no. max. +0,6 min. max. g max.
with chain with cord with chain with cord f. chain
10SL VG95234KR10SL VG95234KA10SL CA121003-1 CAB81-10SL-D 23,5 4,3 90 20 16
12S – – CA121003-2 CAB81-12S-D 27,0 4,3 90 20 17
14S VG95234KR14S VG95234KA14S CA121003-3 CAB81-14S-D 30,5 4,3 90 20 18
16S VG95234KR16S VG95234KA16S CA121003-4 CAB81-16S-D 33,0 4,3 90 20 19
16 VG95234KR16 VG95234KA16 CA121003-5 CAB81-16-D 33,0 4,3 100 25 23
18 VG95234KR18 VG95234KA18 CA121003-6 CAB81-18-D 37,5 4,3 100 25 27
20 VG95234KR20 VG95234KA20 CA121003-7 CAB81-20-D 41,0 4,3 115 25 30
22 VG95234KR22 VG95234KA22 CA121003-8 CAB81-22-D 44,0 4,3 115 25 33
24 VG95234KR24 VG95234KA24 CA121003-9 CAB81-24-D 47,5 4,3 115 25 37
28 VG95234KR28 VG95234KA28 CA121003-10 CAB81-28-D 54,5 5,5 160 25 42
32 VG95234KR32 VG95234KA32 CA121003-11 CAB81-32-D 61,0 5,5 160 25 48
36 VG95234KR36 VG95234KA36 CA121003-12 CAB81-36-D 67,5 5,5 160 25 55
Metal Protecting Caps
for plugs, shell style
3106 and 3108
Material: Aluminum alloy
Shell VG95234 VG95234 Cannon Cannon d1d2l1l2Weight
size Part no. Part no. Part no. Part no. max. max. g max.
with chain with cord with chain with cord
10SL VG95234KB10SL VG95234KC10SL CA121004-1 CAB80-10SL-D 21,0 4,3 90 29 19
12S – – CA121004-2 CAB80-12S-D 24,0 4,3 100 29 23
14S VG95234KB14S VG95234KC14S CA121004-3 CAB80-14S-D 27,5 4,3 100 29 26
16S VG95234KB16S VG95234KC16S CA121004-4 CAB80-16S-D 30,0 4,3 100 29 28
16 VG95234KB16 VG95234KC16 CA121004-5 CAB80-16-D 30,0 4,3 115 37 33
18 VG95234KB18 VG95234KC18 CA121004-6 CAB80-18-D 33,5 4,3 115 37 36
20 VG95234KB20 VG95234KC20 CA121004-7 CAB80-20-D 37,0 4,7 130 37 43
22 VG95234KB22 VG95234KC22 CA121004-8 CAB80-22-D 40,0 4,7 130 37 47
24 VG95234KB24 VG95234KC24 CA121004-9 CAB80-24-D 43,5 4,7 130 37 53
28 VG95234KB28 VG95234KC28 CA121004-10 CAB80-28-D 49,5 4,7 190 37 63
32 VG95234KB32 VG95234KC32 CA121004-11 CAB80-32-D 56,0 5,5 190 37 75
36 VG95234KB36 VG95234KC36 CA121004-12 CAB80-36-D 62,5 5,5 190 37 88
Cannon VG/CA-Bayonet
VG95234 Style KA with cord VG95234 Style KR with chain
VG95234 Style KC with cord VG95234 Style KB with chain
46 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Accessories
Dummy Receptacles
Front panel mounting (rear side open)
VG95234 Style BOD (Flange with through-holes)
CA3105-B
Shell VG 95234 Cannon d1d2l1l2l3l4
size Part no. Part no. –0,15 ±0,2 ±0,3 ±0,1 max. +0,3
10SL VG95234BOD10SL CA3105E10SL-B 18,2 3,2 25,4 18,2 17,5 14,2
12S – CA3105E12S-B 21,4 3,2 28,0 20,6 18,0 14,2
14S VG95234BOD14S CA3105E14S-B 24,6 3,2 30,0 23,0 18,0 14,2
16S VG95234BOD16S CA3105E16S-B 27,4 3,2 32,5 24,6 18,0 14,2
16 VG95234BOD16 CA3105E16-B 27,4 3,2 32,5 24,6 23,5 19,0
18 VG95234BOD18 CA3105E18-B 30,8 3,2 35,0 27,0 23,5 19,0
20 VG95234BOD20 CA3105E20-B 34,2 3,2 38,0 29,4 23,5 19,0
22 VG95234BOD22 CA3105E22-B 37,4 3,2 41,0 31,8 23,5 19,0
24 VG95234BOD24 CA3105E24-B 40,9 3,7 44,5 34,9 25,5 20,6
28 VG95234BOD28 CA3105E28-B 46,7 3,7 50,8 39,7 25,5 20,6
32 VG95234BOD32 CA3105E32-B 53,4 4,3 57,0 44,5 27,0 22,2
36 VG95234BOD36 CA3105E36-B 59,6 4,3 63,5 49,2 27,0 22,2
Dummy Receptacles
Rear panel mounting (rear side closed)
Shell CA3105E-B CA3105E-B-05 d1l1l2l3l4Style A Style B
size Cannon Part no. Cannon Part no. ±0,25 ±0,3 +0,3 d2d2±0,2
with thread with through holes
Style A Style B
10SL 248-8513-000 248-8501-000 18,2 25,4 18,2 21,1 18,3 M4 3,2
12S 248-8514-000 248-8502-000 21,4 28,0 20,6 21,5 18,3 M4 3,2
14S 248-8515-000 248-8503-000 24,6 30,0 23,0 21,5 18,3 M4 3,2
16S 248-8516-000 248-8504-000 27,4 32,5 24,6 21,5 18,3 M4 3,2
16 248-8517-000 248-8505-000 27,4 32,5 24,6 24,8 21,6 M4 3,2
18 248-8518-000 248-8506-000 30,8 35,0 27,0 27,2 23,15 M4 3,2
20s 248-8519-000 248-8507-000 34,2 38,0 29,4 27,2 23,15 M4 3,2
22 248-8520-000 248-8508-000 37,4 41,0 31,8 27,2 23,15 M4 3,2
24 248-8521-000 248-8509-000 40,9 44,5 34,9 27,2 23,15 M4 3,7
28 248-8522-000 248-8510-000 46,7 50,8 39,7 28,2 24,15 M5 3,7
32 248-8523-000 248-8511-000 53,4 57,0 44,5 28,2 24,15 M5 4,4
36 248-8524-000 248-8512-000 59,6 63,5 49,2 28,2 24,15 M5 4,4
47
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Accessories
Sealing Rings
for use on the barrel of the plug
Size Part no. d9
10SL 980-8550-000 9,0
12S 980-8551-000 11,5
14S 980-8552-000 14,0
16/16S 980-8553-000 17,0
18 980-8554-000 19,5
20 980-8555-000 22,5
22 980-8556-000 25,4
24 980-8557-000 28,5
28 980-8558-000 34,0
32 980-8559-000 40,0
36 980-8560-000 45,0
Wire Hole Fillers
Where contacts are not used, the contact cavities are to be
closed by wire holes fillers.
Size VG95234 For contact size d1d2l1l2Colour Part no.
Part no. metr. AWG ±0,1 ±0,2 ±0,1 ±0,3
20 VG95234B20 10 2,3 3,0 2,4 9,7 red 225-1000-000
16S VG95234B16S 15S 16S 2,8 3,7 1,5 4,8 nature 225-8510-000
16 VG95234B16 15S/15 16S/16 2,8 3,7 3,2 11,9 blue 225-0017-000
12 VG95234B12 25/25A 12 3,7 4,6 3,2 11,9 yellow 225-0018-000
8 VG95234B08 60/100 8 5 5,8 3,2 11,9 white 225-0019-000
4 VG95234B04 160 4 7,6 8,5 3,2 11,9 green 225-8502-000
0 VG95234B00 500 0 12,8 13,5 3,2 11,9 black 225-8503-000
48 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Accessories
Cable Clamps
without telescoping bushing
VG95234 Style KK
VG 95234 Former Shell size A-Thread l2d1l1l3Shell-
Part no. Designation MS suitable for max. max. max. max. Weight
connectors g
acc. MS
VG95234KK 4 MS3057- 4A* 10SL, 12S, 5/7-24NEF-2B 10,5 7,9 20,8 22,5 13,2
VG95234KK 6 MS3057- 6A* 14S, 3/4-20UNEF-2B 10,5 11,1 22,4 27,4 18,6
VG95234KK 8 MS3057- 8A* 16S, 16 7/8-20UNEF-2B 10,5 14,2 24,0 29,8 23,6
VG95234KK12 MS3057-10A* 18 1-20UNEF-2B 10,5 15,8 24,0 32,2 27,3
VG95234KK12 MS3057-12A* 20, 22 1 3/16-18NEF-2B 10,5 19,0 24,0 37,4 37,2
VG95234KK16 MS3057-16A* 24, 28 1 7/16-18NEF-2B 10,5 23,7 26,4 43,5 56,3
VG95234KK20 MS3057-20A* 32 1 3/4-18NS-2B 12,0 31,8 28,0 51,7 83,9
VG95234KK24 MS3057-24A* 36 2-18NS-2B 13,7 34,6 29,6 57,8 109,8
* WB = Cable clamp with cable telescoping bushing
Telescoping Bushings
Telescoping bushing (used with MS3057A resp. VG95234KK
cable clamp) keep dirt, oil and dust out of endbell. Taping or
wrapping wires is eliminated since bushing protects wires
guided through clamp. Combinations of two bushings may be
used to decrease inner diameter for improved sealing.
Material: Polychloroprene
Shell VG95234 MS Cannon d1d2d3l Weight
size Part no. Part no. Part no. g
10SL, 12S VG95234KT10SL – 012-8552-000 8,0 6,6 9,9 70,0 4
14S VG95234KT14S – 012-8554-000 10,9 9,1 12,7 67,0 5
16S, 16 VG95234KT16 MS3420-08 012-0218-000 14,0 11,1 19,0 64,0 6
18 VG95234KT18 MS3420-10 012-0219-000 15,7 14,3 22,0 60,0 4
20, 22 VG95234KT20 MS3420-12 012-0220-000 18,8 15,9 26,9 57,0 7
24 VG95234KT24 – 012-8555-000 21,2 16,6 26,9 57,0 13
28 VG95234KT28 – 012-8556-000 23,6 21,5 33,3 54,0 13
32 VG95234KT32 – 012-8557-000 26,5 21,5 33,3 54,0 26
– – 012-8558-000 31,5 26,8 40,4 51,0 26
36 VG95234KT32 – 012-8558-000 31,5 26,8 40,4 51,0 30
– MS3420-24 012-0223-000 34,7 31,8 46,8 48,0 30
49
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Accessories
Gaskets
Thickness of gaskets
made of Alu-Flex “2“ = 0,5 mm
made of Polychloropren “1“ = 1,0 mm
VG95234 Style DA for front panel mounting
VG95234 Style DH for front panel mounting
Size VG 95234 Part no. Part no. l e d1d2Weight
Part no. Version Version ±0,5 ±0,2 +1 +0,5 g max.
Polychloropen1Alu-Flex2front panel
10SL VG 95234 DA 10SL-X 075-8512-000 075-8512-001 25,4 18,2 15,7 4,2 2
12S 075-8513-000 075-8513-001 28,0 20,6 18,9 4,2 2
14S VG 95234 DA 14S-X 075-8514-000 075-8514-001 30,0 23,0 22,1 4,2 2
16/16S VG 95234 DA 16X 075-8515-000 075-8515-001 32,5 24,6 25,3 4,2 2
18 VG 95234 DA 18-X 075-8516-000 075-8516-001 35,0 27,0 28,4 4,2 2
20 VG 95234 DA 20-X 075-8517-000 075-8517-001 38,0 29,4 31,6 4,2 2
22 VG 95234 DA 22-X 075-8518-000 075-8518-001 41,0 31,8 34,8 4,2 2
24 VG 95234 DA 24-X 075-8519-000 075-8519-001 44,5 34,9 38,0 4,2 2
28 VG 95234 DA 28-X 075-8520-000 075-8520-001 50,8 39,7 44,3 5,1 2
32 VG 95234 DA 32-X 075-8521-000 075-8521-001 57,0 44,5 50,7 5,1 2
36 VG 95234 DA 36-X 075-8522-000 075-8522-001 63,5 49,2 57,0 5,1 2
For front panel mounting
Size VG 95234 Part no. Part no. l e d1d2Weight
Part no. Version Version ±0,5 ±0,2 +1 +0,5 g max.
Polychloropen1Alu-Flex2front panel
10SL VG 95234 DH 10SL-X 075-8501-000 075-8501-001 25,4 18,2 18,2 4,2 2
12S 075-8502-000 075-8502-001 28,0 20,6 21,4 4,2 2
14S VG 95234 DH 14S-X 075-8503-000 075-8503-001 30,0 23,0 24,6 4,2 2
16/16S VG 95234 DH 16X 075-8504-000 075-8504-001 32,5 24,6 27,4 4,2 2
18 VG 95234 DH 18-X 075-8505-000 075-8505-001 35,0 27,0 30,8 4,2 2
20 VG 95234 DH 20-X 075-8506-000 075-8506-001 38,0 29,4 34,2 4,2 2
22 VG 95234 DH 22-X 075-8507-000 075-8507-001 41,0 31,8 37,4 4,2 2
24 VG 95234 DH 24-X 075-8508-000 075-8508-001 44,5 34,9 40,9 4,2 2
28 VG 95234 DH 28-X 075-8509-000 075-8509-001 50,8 39,7 46,7 5,1 2
32 VG 95234 DH 32-X 075-8510-000 075-8510-001 57,0 44,5 53,4 5,1 2
36 VG 95234 DH 36-X 075-8511-000 075-8511-001 63,5 49,2 59,6 5,1 2
For rear panel mounting
X = insert “1“ (electrically not conductive) or “2“ (electrically conductive)
Contacts
Standard contacts and
contacts with reduced
termination diameter
Pin contacts
Finish
A36 – 5 µm silver plated and passivated
A176 – 2 µm nickel plated, min. 0,5 µm gold plated
50 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Contacts
Contact VG95234 Wire Part no. with Part no. with d1d4d6d7l1l3
size Part no. size finish finish -0,05 ±0,15 ±0,5 Color
mm2AWG Standard: A36 Mod.Code: A176 Code
silver plated gold plated
10/20 VG95234P10-002 0,5-1,0 20/18 030-8585-000 030-8585-006 1,04 1,5 -0,05 1,5 +0,05 2,4 -0,05 28,4 4,75 –
VG95234P10-001 0,2-0,4 26/22 030-8585-010 – 1,04 1,5 -0,05 0,9 +0,05 2,4 -0,05 28,4 4,75 blue
15S/16S VG95234P15S-003 0,75-1,5 18/16 030-8586-000 030-8586-006 1,6 1,75 -0,1 1,75 +0,08 2,75 -0,05 27,4 3,85 –
VG95234P15S-002 0,3-0,6 22/20 330-8744-000 330-8744-006 1,6 1,75 -0,1 1,2 +0,1 2,75 -0,05 27,4 3,85 red
VG95234P15S-001 0,14-0,38 22/26 030-8586-010 – 1,6 1,75 -0,1 0,9 +0,05 2,75 -0,05 27,4 3,85 blue
15/16 VG95234P15-003 0,75-1,5 18/16 030-8587-000 030-8587-006 1,6 1,75 -0,1 1,75 +0,08 2,75 -0,05 31,4 7,9 –
VG95234P15-002 0,3-0,6 22/20 330-8659-000 330-8659-006 1,6 1,75 -0,1 1,2 +0,1 2,75 -0,05 31,4 7,9 red
VG95234P15-001 0,14-0,38 22/26 030-8587-030 030-8587-036 1,6 1,75 -0,1 0,9 +0,05 2,75 -0,05 31,4 7,9 blue
25/12 VG95234P25-002 2,0-3,0 14/12 030-8588-000 030-8588-006 2,4 3,3 -0,15 2,5 +0,1 3,8 -0,1 37,0 7,9 –
VG95234P25-001 0,75-1,5 18/16 030-8588-010 030-8588-016 2,4 3,3 -0,15 1,75 +0,08 3,4 -0,1 37,0 7,9 black
4,0 – 030-8588-054 – 2,4 3,3 -0,15 2,8 +0,1 3,8 -0,1 37,0 7,9
60/100/8 VG95234P8-001 – 8 030-8612-000 030-8612-006 3,6 6,25 -0,15 4,55 +0,1 6,8 -0,1 39,6 6,35 –
VG95234P60-002 6,0 10 030-8589-000 – 3,6 6,25 -0,15 3,5 +0,1 6,8 -0,1 39,6 6,35 yellow
VG95234P100-001 10,0 – 030-8590-000 – 3,6 6,25 -0,15 4,8 +0,1 6,8 -0,1 39,6 6,35 –
VG95234P60-001 2,0-3,0 14/12 030-8612-010 – 3,6 6,25 -0,15 2,5 +0,05 6,8 -0,1 39,6 6,35 green
160/4 VG95234P4-001 – 4 030-8613-000 – 5,75 9,55 -0,15 7,1 +0,15 9,55 -0,1 39,6 6,35 –
VG95234P160-002 16,0 – 030-8591-000 – 5,75 9,55 -0,15 6,2 +0,15 9,55 -0,1 39,6 6,35 –
10,0 – 030-8591-020 – 5,75 9,55 -0,15 4,8 +0,1 9,55 -0,1 39,6 6,35 –
VG95234P160-001 – 6 030-8613-010 – 5,75 9,55 -0,15 5,7 +0,1 9,55 -0,1 39,6 6,35 brown
500/0 VG95234P0-001 – 0 030-8614-000 – 9,1 13,55 -0,15 11,5 +0,15 14,35 -0,1 41,0 6,35 –
VG95234P500-003 50,0 – 030-8592-000 – 9,1 13,55 -0,15 10,7 +0,15 14,35 -0,1 41,0 6,35 –
VG95234P500-001 25,0 4 030-8614-010 – 9,1 13,55 -0,15 7,6 +0,15 14,35 -0,1 41,0 6,35 white
VG95234P500-002 35,0 2 030-8614-020 – 9,1 13,55 -0,15 9,1 +0,15 14,35 -0,1 41,0 6,35 grey
16,0 – 030-8614-030 – 9,1 13,55 -0,15 6,2 +0,15 14,35 -0,1 41,0 6,35 –
Size 15S/16S, 15/16, 25/12, 60/100/8, 160/4, 500/0 Size 10/20
51
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Contacts
Contacts
Standard contacts and
contacts with reduced
termination diameter
Socket contacts
Finish
A36 – 5 µm silver plated
and passivated
A176 – 2 µm nickel plated,
min. 0,5 µm gold plated
Contact VG95234 Wire Part no. with Part no. with d1d2d3d5d6l1l3
size Part no. size finish finish +0,05 ±0,2 ±0,1 Color
mm2AWG Standard: A36 Mod.Code A176 Code
silver plated gold plated
10/20 VG95234S10-002 0,5-1,0 20/18 031-8554-000 031-8554-006 2,0 -0,1 1,07 1,5 -0,05 1,5 +0,05 2,4 -0,05 36,8±0,3 4,75 –
VG95234S10-001 0,2-0,4 26/22 031-8554-010 – 2,0 -0,1 1,07 1,5 -0,05 0,9 +0,05 2,4 -0,05 36,8±0,3 4,75 blue
15S/16S VG95234S15S-003 0,75-1,5 18/16 031-8555-110 031-8555-115 3,2 -0,15 1,65 1,75 -0,1 1,75 +0,08 2,75 -0,05 29,1 3,9 –
VG95234S15S-002 0,3-0,6 22/20 031-8688-110 031-8688-115 3,2 -0,15 1,65 1,75 -0,1 1,20 +0,1 2,75 -0,05 29,1 3,9 red
VG95234S15S-001 0,14-0,38 22/26 031-8555-130 – 3,2 -0,15 1,65 1,75 -0,1 0,90 +0,05 2,75 -0,05 29,1 3,9 blue
15/16 VG95234S15-003 0,75-1,5 18/16 031-8556-110 031-8556-115 3,2 -0,15 1,65 1,75 -0,1 1,75 +0,08 2,75 -0,05 37,8 7,9 –
VG95234S15-002 0,3-0,6 22/20 031-8639-120 031-8639-115 3,2 -0,15 1,65 1,75 -0,1 1,2 +0,1 2,75 -0,05 37,8 7,9 red
VG95234S15-001 0,14-0,38 22/26 031-8556-130 – 3,2 -0,15 1,65 1,75 -0,1 0,9 +0,05 2,75 -0,05 37,8 7,9 blue
25/12 VG95234S25-002 2,0-3,0 14/12 031-8557-000 031-8557-006 4,8 -0,1 2,45 3,3 -0,1 2,5 +0,1 3,8 -0,1 37,0 7,9 –
VG95234S25-001 0,75-1,5 18/16 031-8557-020 031-8557-026 4,8 -0,1 2,45 3,3 -0,1 1,75 +0,08 3,4 -0,1 37,0 7,9 black
4,0 – 031-8557-010 – 4,8 -0,1 2,45 3,3 -0,1 2,8 +0,1 3,8 -0,1 37,0 7,9 –
0,3–0,6 22/20 031-8557-040 – 4,8 -0,1 2,45 3,3 -0,1 1,2 +0,1 2,75 -0,1 37,0 7,9 –
60/100/8 VG95234S8-001 – 8 031-8519-000 031-8519-006 6,5 -0,2 3,65 6,25 -0,2 4,55 +0,1 6,8 -0,1 40,1 6,35 –
VG95234S60-002 6,0 10 031-8558-000 – 6,5 -0,2 3,65 6,25 -0,2 3,5 +0,1 6,8 -0,1 40,1 6,35 yellow
VG95234S100-001 10,0 – 031-8559-000 – 6,5 -0,2 3,65 6,25 -0,2 4,8 +0,1 6,8 -0,1 40,1 6,35 –
VG95234S60-001 2,0-3,0 14/12 031-8519-010 – 6,5 -0,2 3,65 6,25 -0,2 2,5 +0,05 6,8 -0,1 40,1 6,35 green
160/4 VG95234S4-001 – 4 031-8520-000 – 8,6 -0,2 5,8 9,55 -0,2 7,1 +0,15 9,55 -0,1 40,1 6,35 –
VG95234S160-002 16,0 – 031-8560-000 – 8,6 -0,2 5,8 9,55 -0,2 6,2 +0,15 9,55 -0,1 40,1 6,35 –
10,0 – 031-8560-020 – 8,6 -0,2 5,8 9,55 -0,2 4,8 +0,1 9,55 -0,1 40,1 6,35 –
VG95234S160-001 – 6 031-8520-010 – 8,6 -0,2 5,8 9,55 -0,2 5,7 +0,15 9,55 -0,1 40,1 6,35 brown
500/0 VG95234S0-001 – 0 031-8521-000 – 13,2 -0,2 9,15 13,55 -0,2 11,5 +0,15 14,35 -0,1 41,6 6,35 –
VG95234S500-003 50,0 – 031-8561-000 – 13,2 -0,2 9,15 13,55 -0,2 10,7 +0,15 14,35 -0,1 41,6 6,35 –
VG95234S500-001 25,0 4 031-8521-010 – 13,2 -0,2 9,15 13,55 -0,2 7,6 +0,15 14,35 -0,1 41,6 6,35 white
VG95234S500-002 35,0 2 031-8521-020 – 13,2 -0,2 9,15 13,55 -0,2 9,1 +0,15 14,35 -0,1 41,6 6,35 grey
16,0 – 031-8521-030 – 13,2 -0,2 9,15 13,55 -0,2 6,2 +0,15 14,35 -0,1 41,6 6,35 –
Size 10/20 Size 25/12
Size 60/100/8, 160/4, 500/0
Size 15S/16S, 15/16
52 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Contacts
Termination Tools
for pin contacts according VG95234 and for Cannon
contacts with reduced termination size.
Contact Wire size Hand crimp tool Pneumatic crimp tool1) Universal- Turret for
size Type Crimp die for Standard Turret for type Universal
mm2AWG M22520-1-01 type Standard type
type
10/20 0,2 – 1,0 20 – 24 600 325 600 098 608 325
600 325 600 098 608 325
15S/16S 0,14 – 1,5 16 – 26 TH 452 600 082 TH 452
TH 452 600 082 TH 452
15/16 0,14 – 1,5 16 – 26 TH 452 604 292 TH 452
TH 452 604 292 TH 452
25/12 0,75 – 4,0 12 – 18 TH 452 600 099 TH 452
TH 452 600 099 TH 452
TH 452 600 099 TH 452
Contact Wire size Hydraulic basic Crimp tool (2 of each required)
size mm2AWG equipment 6-kt Crimp die
60/8 10,0 – 2,0 8 – 14 Electro-hydraulic tool * CT 317-8678-000
100/ HK12EL (order number: 121586-5075)
Hand operated hydraulic tool
HK120 (order number: 121586-5077)
160/4 16,0 – 10,0 4 – 6 CT 317-8678-001
500/0 50,0 – 16,0 0 – 4 CT 317-8678-002
M22520-1-01
Hand crimp
tool
(eight indent
crimp)
Eight indent
crimp
612 871
table device
with foot pedal
611 380
Eight indent
crimp
612 141
Table device
with foot pedal
611 380
Notes
1. For large series production, semi-automatic crimp machine
Type HACS-IV-MSXX upon request
2. For insertion and extraction of the contacts and for connector assembly,
see Assembly Instructions MIL-C-5015/VG95234
3. Standard contacts acc. to MIL-C-5015/VG95234
* Datasheet available upon request
To insert the socket contact of size 15S/16S, 15/16/25 and 12, the following
guiding pins are to be used:
Part Nr. Contact size
AWG metric
226-1017-000 16S/16 15S/15
226-1018-000 12 25
Contact Wire size Hydraulic basic Crimp tool (2 of each required)
size mm2AWG equipment 6-kt Crimp die
60/8 10 – 2 8 – 14 Electro-hydraulic tool * CT 317-8678-000
100/ HK12EL (order number: 121586-5075)
Hand operated hydraulic tool
HK120 (order number: 121586-5077)
160/4 16 – 10 4 – 6 CT 317-8678-001
500/0 50 – 14 0 – 4 CT 317-8678-002
53
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Contacts
Termination Tools
for pin contacts according VG95234 and Cannon
contacts with reduced termination diameter.
Contact Wire Hand crimp tool Pneumatic crimp tool1)
size size Type Crimp die for Standard Turret for Universal Turret for
mm2AWG M22520-1-01 type Standard type Universal
type type
10/20 0,2-1,0 18 – 24 M22520-1-01 600 325 Eight indent 600 098 Eight indent 600 325
Eight indent 600 325 crimp 600 098 crimp 600 325
tool 612 871 612 141
15S/16S 0,2-1,0 16 – 22 (eight indent TH 452 600 083 TH 452
Crimp) 611 380 Table device 611 380 table device
and foot pedal with foot pedal
15/16 0,2-1,0 16 – 22 TH 452 611 380 604 081 611 380 TH 452
25/12 0,2-1,0 12 – 18 TH 452 600 099 TH 452
Notes
1. For large series production, semi-automatic crimp machine
Type HACS-IV-MSXX upon request
2. For insertion and extraction of the contacts and for connector assembly,
see Assembly Instructions MIL-C-5015/VG95234
3. Standard contacts acc. MIL-C-5015/VG95234
* Datasheet available upon request
54 www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
THIS NOTE MUST BE READ IN CON-
JUNCTION WITH THE PRODUCT DATA
SHEET/CATALOG. FAILURE TO
OBSERVE THE ADVICE IN THIS INFOR-
MATION SHEET AND THE OPERATING
CONDITIONS SPECIFIED IN THE PROD-
UCT DATA SHEET/ CATALOG COULD
RESULT IN HAZARDOUS SITUATIONS.
1. MATERIAL CONTENT AND PHYSICAL
FORM
Electrical connectors do not usually contain
hazardous materials. They contain conduct-
ing and non-conducting materials and can
be divided into two groups.
a) Printed circuit types and low cost audio
types which employ all plastic insulators and
casings.
b) Rugged, Fire Barrier and High Reliability
types with metal casings and either natural
rubber, synthetic rubber, plastic or glass
insulating materials. Contact materials vary
with type of connector and also application
and are usually manufactured from either:
Copper, copper alloys, nickel, alumel,
chromel or steel. In special applications,
other alloys may be specified.
2. FIRE CHARACTERISTICS AND ELEC-
TRIC SHOCK HAZARD
There is no fire hazard when the connec-
tor is correctly wired and used within the
specified parameters. Incorrect wiring or
assembly of the connector or careless
use of metal tools or conductive fluids,
or transit damage to any of the compo-
nent parts may cause electric shock or
burns. Live circuits must not be broken
by separating mated connectors as this
may cause arcing, ionization and burn-
ing. Heat dissipation is greater at maximum
resistance in a circuit. Hot spots may occur
when resistance is raised locally by damage,
e.g. cracked or deformed contacts, broken
strands of wire. Local overheating may also
result from the use of the incorrect applica-
tion tools or from poor quality soldering or
slack screw terminals. Overheating may
occur if the ratings in the product Data
Sheet/Catalog are exceeded and can cause
breakdown of insulation and hence electric
shock. If heating is allowed to continue it
intensifies by further increasing the local
resistance through loss of temper of spring
contacts, formation of oxide film on contacts
and wires and leakage currents through car-
bonization of insulation and tracking paths.
Fire can then result in the presence of com-
bustible materials and this may release nox-
ious fumes. Overheating may not be visually
apparent. Burns may result from touching
overheated components.
3. HANDLING
Care must be taken to avoid damage
to any component parts of electrical connec-
tors during installation and use. Although
there are normally no sharp edges, care
must be taken when handling certain com-
ponents to avoid injury to fingers. Electrical
connectors may be damaged in transit to the
customers, and damage may result in cre-
ation of hazards. Products should therefore
be examined prior to installation/use and
rejected if found to be damaged.
4. DISPOSAL
Incineration of certain materials may release
noxious or even toxic fumes.
5. APPLICATION
Connectors with exposed contacts should
not be selected for use on the current supply
side of an electrical circuit, because an elec-
tric shock could result from touching
exposed contacts on an unmated connector.
Voltages in excess of 30 V ac or 42.5 V dc
are potentially hazardous and care should
be taken to ensure that such voltages can-
not be transmitted in any way to exposed
metal parts of the connector body. The con-
nector and wiring should be checked, before
making live, to have no damage to metal
parts or insulators, no solder blobs, loose
strands, conducting lubricants, swarf, or any
other undesired conducting particles. Circuit
resistance and continuity check should be
made to make certain that there are no high
resistance joints or spurious conducting
paths. Always use the correct application
tools as specified in the Data Sheet/Catalog.
Do not permit untrained personnel to wire,
assemble or tamper with connectors. For
operation voltage please see appropriate
national regulations.
IMPORTANT GENERAL INFORMATION
(i) Air and creepage paths/Operating volt-
age. The admissible operating voltages
depend on the individual applications and
the valid national and other applicable safety
regulations.
For this reason the air and creepage path
data are only reference values. Observe
reduction of air and creepage paths due to
PC board and/or harnessing.
(ii) Temperature
All information given are temperature limits.
The operation temperature depends on the
individual application.
(iii) Other important information
Cannon continuously endeavors to improve
their products. Therefore, Cannon products
may deviate from the description, technical
data and shape as shown in this catalog and
data sheets.
“Engineered for life” is a registered trade-
mark of ITT Industries, ©2005. All other
trademarks or registered trademarks are
property of their respective owners. All data
subject to change without notice.
Product Warranty
ITT Cannon, a Division of ITT Industries,
Inc. manufactures the highest quality prod-
ucts available in the marketplace; however
these products are intended to be used in
accordance with the specifications in this
publication. Any use or application that devi-
ates from the stated operating specifications
is not recommended and may be unsafe. No
information and data contained in this publi-
cation shall be construed to create any liabil-
ity on the part of Cannon. Any new issue of
this publication shall automatically invalidate
and supersede any and all previous issues.
A limited warranty applies to Cannon prod-
ucts. Except for obligations assumed by
Cannon under this warranty, Cannon shall
not be liable for any loss, damage, cost of
repairs, incidental or consequential dam-
ages of any kind, whether or not based on
express or implied warranty, contract, negli-
gence or strict liability arising in connection
with the design, manufacture, sale, use or
repair of the products. Product availability,
prices and delivery dates are exclusively
subject to our respective order confirmation
form; the same applies to orders based on
development samples delivered. This publi-
cation is not to be construed as an offer. It is
intended merely as an invitation to make an
offer. By this publication, Cannon does not
assume responsibility or any liability for any
patent infringements or other rights of third
parties which may result from its use.
Reprinting this publication is generally per-
mitted, indicating the source. However, Can-
non's prior consent must be obtained in all
cases.
Product Safety Information
ITT ...
providing a comprehensive offering of connectivity solutions.
In addition to connector products, we provide a complete line of electronic components and value-added solutions.
Modular assembly options include: ESD shielding,
keypads, EL backlighting, rigid or flexible circuits
Complete design, engineering and test capabilities
Low, mid and high volume production capabilities
Rubber and In Mold Decoration (IMD) products
Wide range of cosmetic options
Integration of decorated and metalized plastic keytops
Multiple PILL and contact options
Precision molded polymeric solutions
From multi-function grips to sophisticated control systems,
hall effect products and front panel assemblies
Electronics and software engineering development
Worldwide design and manufacturing
High-mix production capabilities
Global sourcing and supply chain management
Top/side actuated tacts
Low profile SMT
Navigation / scrolling switches
Toggle, rocker, pushbutton, DIP, slide, snap,
switchlock, rotary, thumbwheel
Circular
Compact flash
D-Subminiature
Fiber optics
Filter
Microminiature
Mobile
Rack & Panel
RF
USB
Zero insertion force
Smart Cards
“Engineered for life” is a registered trademark
of ITT Industries.©2005. All other trademarks
or registered trademarks are property of their
respective owners. All data subject to change
without notice.
CAB 05-Sept
www.ittcannon.com
Connector Product Locations
With manufacturing facilities, sales representatives and distributors located
worldwide, please visit our website at www.ittcannon.com for a complete listing and to
find the office nearest you.
GERMANY
Cannonstrasse 1
Weinstadt, 71384
phone: 49.7151.699.0
fax: 49.7151.699.217
HONG KONG
Unit 901 & 912, West Tower
Shun Tak Center
168-200 Connaught Road
Central
phone: 852.2732.2720
fax: 852.2732.2919
ITALY
Via Pietro Panzeri 10
Milano, 20123
phone: 39.2.58180.1
fax: 39.2.8372036
UK
Jays Close, Viables Estate
Basingstoke, RG22 4BA
phone: 44.1256.311200
fax: 44.1256.323356
USA
666 East Dyer Road
Santa Ana, CA 92705
toll free: 1.800.854.3028
phone: 1.714.557.4700
fax: 1.714.628.2142
