S82J-01024AD - Omron - Pdf.Support

CSM_S82J_DS_E_3_1

Switch Mode Power Supply

S82J (10/25/50/100/150/300/600-W Models)

Low-cost Global Power Supply with CE

Marking

• Safety standards:

UL: UL508 (Class 2), No.60950-1,

cUL: CSA C22.2 No. 14 (Class 2), cUR: 60950-1,

EN50178 (= VDE0160)

EMC: Conforms to EN61204-3 Class A

• Mounting bracket available for standard models

Front-mounting bracket type

DIN Rail mounting type (except 300 W and 600 W)

• RoHS-compliant

!Refer to Safety Precautions for All Power Supplies.

Model Number Structure

■Model Number Legend

Note: Not all combinations are possible. Refer to List of Models in Ordering Information on page 2 and 3.

S82J -

1324

1. Power Ratings

010: 10 W

025: 25 W

050: 50 W

100: 100 W

150: 150 W

300: 300 W

600: 600 W

2. Output Voltage

05: 5 V

12: 12 V

15: 15 V

24: 24 V

3. Configuration

10-/25-/50-/100-/150-W models

A: Open-frame type, front terminals

D: Covered type, front terminals

Mounting bracket

None: With mounting bracket

N: Without mounting bracket

4. Mounting Bracket

None: Front-mounting bracket type

D: DIN Rail mounting bracket type

S82J

Ordering Information

■List of Models

Note: For details on normal stock models, contact your nearest OMRON representative.

Front-mounting Bracket Models

Configuration Input Voltage Power ratings Output voltage Output current Front-mounting bracket

models

(Front terminals)

Open-frame type 100 to 240 VAC (free) 10 W 5 V 2 A S82J-01005A

12 V 1 A S82J-01012A

15 V 0.7 A S82J-01015A

24 V 0.5 A S82J-01024A

25 W 5 V 5 A S82J-02505A

12 V 2.1 A S82J-02512A

15 V 1.7 A S82J-02515A

24 V 1.1 A S82J-02524A

50 W 5 V 10 A S82J-05005A

12 V 4.2 A S82J-05012A

24 V 2.1 A S82J-05024A

100 or 200 VAC

(selected automatically)

100 W 5 V 20 A S82J-10005A

12 V 8.5 A S82J-10012A

15 V 7 A S82J-10015A

100 to 240 VAC (free) 24 V 4.5 A S82J-10024A

100 or 200 VAC

(selected automatically)

150 W 24 V 6.5 A S82J-15024A

Covered type 100 to 240 VAC (free) 10 W 5 V 2 A S82J-01005D

12 V 1 A S82J-01012D

15 V 0.7 A S82J-01015D

24 V 0.5 A S82J-01024D

25 W 5 V 5 A S82J-02505D

12 V 2.1 A S82J-02512D

15 V 1.7 A S82J-02515D

24 V 1.1 A S82J-02524D

50 W 5 V 10 A S82J-05005D

12 V 4.2 A S82J-05012D

24 V 2.1 A S82J-05024D

100 or 200 VAC

(selected automatically)

100 W 5 V 20 A S82J-10005D

12 V 8.5 A S82J-10012D

15 V 7 A S82J-10015D

100 to 240 VAC (free) 24 V 4.5 A S82J-10024D

100 or 200 VAC (selected

automatically)

150 W 24 V 6.5 A S82J-15024D

100 or 200 VAC (selectable) 300 W 24 V 14 A S82J-30024

S82J-30024N

600 W 27 A S82J-60024

S82J-60024N

S82J

DIN Rail Mounting Bracket Models

■Accessories (Order Separately)

Front Mounting Bracket (for the S82J-10024A and S82J-10024D)

S82Y-J10F

Replacement Fan

S82Y-JFAN

Configuration Input Voltage Power ratings Output voltage Output current DIN Rail mounting

bracket models

(Front terminals)

Open-frame type 100 to 240 VAC (free) 10 W 5 V 2 A S82J-01005AD

12 V 1 A S82J-01012AD

15 V 0.7 A S82J-01015AD

24 V 0.5 A S82J-01024AD

25 W 5 V 5 A S82J-02505AD

12 V 2.1 A S82J-02512AD

15 V 1.7 A S82J-02515AD

24 V 1.1 A S82J-02524AD

50 W 5 V 10 A S82J-05005AD

12 V 4.2 A S82J-05012AD

24 V 2.1 A S82J-05024AD

100 or 200 VAC

(selected automatically)

100 W 5 V 20 A S82J-10005AD

12 V 8.5 A S82J-10012AD

15 V 7 A S82J-10015AD

100 to 240 VAC (free) 24 V 4.5 A S82J-10024AD

100 or 200 VAC

(selected automatically)

150 W 24 V 6.5 A S82J-15024AD

Covered type 100 to 240 VAC (free) 10 W 5 V 2 A S82J-01005DD

12 V 1 A S82J-01012DD

15 V 0.7 A S82J-01015DD

24 V 0.5 A S82J-01024DD

25 W 5 V 5 A S82J-02505DD

12 V 2.1 A S82J-02512DD

15 V 1.7 A S82J-02515DD

24 V 1.1 A S82J-02524DD

50 W 5 V 10 A S82J-05005DD

12 V 4.2 A S82J-05012DD

24 V 2.1 A S82J-05024DD

100 or 200 VAC

(selected automatically)

100 W 5 V 20 A S82J-10005DD

12 V 8.5 A S82J-10012DD

15 V 7 A S82J-10015DD

100 to 240 VAC (free) 24 V 4.5 A S82J-10024DD

100 or 200 VAC

(selected automatically)

150 W 24 V 6.5 A S82J-15024DD

S82J

Specifications

■Ratings/Characteristics

Power ratings

(See note 1.)

100 to 240 V (Free) 100/200 (Selected

automatically)

100/200 (Selected)

10 W 25 W 50 W 100 W

(24 V)

100 W (5 V,

12 V, 15 V)

150 W 300 W 600 W

Efficiency (typical) 67% min. (Varies depending on

specifications)

83% min. 75% min. 82% min.

Input Voltage (See note 2.) 100 to 240 VAC (85 to 264 VAC) 100 VAC (85 to 132 VAC)

200 VAC (170 to 264 VAC)

(selected automatically)

100 VAC (85 to 132 VAC)

200 VAC (170 to 253 VAC)

(selectable)

110 to 170 VDC (10-W and 25-W models only) (See

note 11.)

Frequency (See note 2.) 50/60 Hz (47 to 450 Hz)

Current

(See note 3.)

100-V input 0.35 A max. 0.8 max. 1.4 A max. 2.5 A max. 2.5 A max. 3.5 A max. 8 A max. 14 A max.

200-V input 0.3 A max. 0.6 A max. 0.8 A max. 1.5 A max. 1.4 A max. 2.1 A max. 4 A max. 7 A max.

Leakage current

(See note 3.)

100-V input 0.5 mA max.

200-V input 1 mA max.

Inrush current

(See note 3.)

100-V input 25 A max. (for a cold start at 25°) 30 A max. (for a cold

start at 25°)

200-V input 50 A max. (for a cold start at 25°) 60 A max. (for a cold

start at 25°)

Noise filter Yes

Output

(See

note 4.)

Voltage Adjustment Range

(See note 5.)

±10% (with V. ADJ)

Ripple (See note 3.) 2% (p-p) max.

Input variation influence 0.4% max.

Load variation influence 0.8% max. (10% to 100% load, rated input voltage)

Temperature variation influence 0.05%/°C max. (at rated input and output)

Startup time 500 ms max. (up to 90% of output voltage at rated input and output) 300 ms max. (up to 90% of output

voltage at rated input and output)

Hold time (See note 3.) 20 ms min.

Addi-

tional

func-

tions

Overload protection

(See note 6.)

105% to 160% of rated load current, voltage/current drop, intermittent operation

(10-W and 25-W models) gradual current increase/ voltage drop, intermittent

operation (50-W, 100-W (24 V) models), automatic reset

105% of rated load current, Inverted L

voltage drop, automatic reset (For the

600-W model, the circuit will be shut

OFF when the overload exceeds 5 s.)

Overvoltage protection No Yes (See

note 7.)

Yes (5-V

output only)

(See note 7.)

No Yes (See note 8.)

Overheat protection No Yes (See note 8.)

Parallel operation No Yes (up to 5 units)

Protection-ON alarm indicator No Yes (color: red)

Other Ambient operating temperature Refer to the derating curve in Engineering Data. (with no icing or condensation)

Storage temperature −25 to 65°C (with no icing or condensation)

Ambient operating humidity 25% to 85% (Storage humidity: 25% to 90%)

Dielectric strength 3.0 k VAC for 1 min. (between all inputs and all outputs)

2.2 k VAC for 1 min. (between all inputs and all outputs/PE terminals)

1.0 k VAC for 1 min. (between all outputs and PE terminal)

Insulation resistance 100 MΩ min. (between all outputs and all inputs/ PE terminals) at 500 VDC

Vibration resistance 10 to 55 Hz, 0.375-mm single amplitude for 2h each in X, Y, and Z directions

Shock resistance 300m/s2, 3 times each in ±X, ±Y, ±Z directions

Output indicator Yes (color: green)

EMI Conducted

Emissions

(See note 3.)

Conforms to EN61204-3 EN55011 Class A and based on FCC Class A

Radiated

Emissions

Conforms to EN61204-3 EN55011 Class A (See note 9.)

EMS Conforms to EN61204-3 Low severity levels

Approved standards UL: UL508 (Listing; Class 2: Per UL1310

Class 2 approved for 10-W, 25-W (except

for 5-V output)), and 50-W (only for 24-V

output) models.), UL60950-1

cUL: CSA C22.2 No.14 (Class 2 approved for

10-W, 25-W (except for 5-V output), and

50-W (only for 24-V output) models.)

cUR: CSA No. 60950-1

EN/VDE: EN50178 (=VDE0160)

Terminal types (only terminal part):

VDE0106/P100

Based on VE0106/P100

Models with Terminals

UL: UL508 (Listing), UL1012, UL60950-1

cUL: CSA C22.2 No. 14 (Listing)

cUR: CSA No. 60950-1

EN/VDE: EN50178 (=VDE0160)

Terminal types (only terminal part):

VDE0106/P100

Based on VE0106/P100

Models with Connectors

UL: UL508, UL1012, UL60950-1

CSA: CSA C22.2 No.14

CSA No. 60950-1

EN/VDE: EN50178 (=VDE0160)

UL: UL508, UL1012

CSA: EB1402C, C22.2 No. 14

EN/VDE: EN50178 (=VDE0160)

Terminal types (only terminal part):

VDE0106/P100

Based on VE0106/P100

Weight (See note 10.) 250 g max. 350 g max. 400 g max. 500 g max. 1,000 g max. 2,000 g max. 2,500 g max.

S82J

Note: 1. When a load is connected that has a built-in DC-DC converter, the overload protection may operate at startup and the power supply may

not start. Be sure to select a Power Supply with sufficient capacity. Refer to Overload Protection on page 10 for details.

2. Do not use the Inverter output for the Power Supply. Inverters with an output frequency of 50/60 Hz are available, but the rise in the internal

temperature of the Power Supply may result in ignition or burning.

3. Defined with a 100% load and the rated input voltage (100 or 200 VAC.)

4. The output specification is defined at the power output terminals.

5. If the output voltage adjuster (V. ADJ) is turned, the voltage will increase by more than +10% of the voltage adjustment range.

When adjusting the output voltage, confirm the actual output voltage from the Power Supply and be sure that the load is not damaged.

6. Refer to Overload Protection on page 10 for details.

7. For resetting, turn OFF the power, leave for more than one minute, and then turn it ON again.

8. The protection-ON alarm indicator will light as soon as the output is interrupted. For resetting, turn OFF the input power, leave for more

than three minutes (90 seconds min. for the 300-W models), and then turn it back ON again.

9. Radiated emissions: The noise value is affected by factors such as the wiring method. For 300-W and 600-W models, use shielded wire

for all wiring, and insert one noise clamp filter (TDK, ZCAT3035-1330) on the input wire, and two noise clamp filters on the load wire.

10.The weight indicated is the weight of the open-frame type. (Includes the covers for 300-W and 600-W models)

Connections

■Block Diagrams

S82J-050@@@@ (50 W)

Noise filter

S82J-010@@@@ (10 W)

S82J-025@@@@ (25 W)

AC (L)

AC (N)

−

Noise filter

AC (L)

AC (N)

−

DC Output

Fuse (See note.) Smoothing

Detection

circuit

Photocoupler

Input

Rectification

Note: Fuse capacity: 10 W, 1 A

25 W, 2 A

Inrush current

protection circuit Rectifier/

smoothing

circuit

Overcur-

rent

detection

circuit

Control circuit

Noise filter

DC Output

Fuse (3A) Smoothing

Detection

circuit

Photocoupler

Input

Rectification

Inrush current

protection circuit Rectifier/

smoothing

circuit

Overcur-

rent

detection

circuit

Control circuit

Noise filter

S82J

−V

DC Output

Input

Fuse (5A)

Noise filter

Overvoltage protection circuit (5 V only)

Photocoupler

S82J-100@@@@

(100 W, 5-/12-/15-V Output)

Inrush current

protection circuit

Rectifier/

smoothing circuit

Over-

voltage

detector

AC (L)

AC (N)

Detection

circuit

Rectifier/

smoothing

circuit

Noise filter

Control circuit

Overcur-

rent

detection

circuit

100 or 200 V

(selected

automatically)

S82J-10024@@ (100 W, 24-V Output)

S82J-15024@@ (150 W)

Noise filter

AC (L)

AC (N)

−V

DC Output

Fuse (5 A) Smoothing

Detection

circuit

Photocoupler

Detection

circuit

Photocoupler

Input

Rectification

Inrush current

protection circuit Rectifier/

smoothing

circuit

Overcur-

rent

detection

circuit

Control circuit

Noise filter

−V

DC Output

Input

Fuse (8 A)

Noise filter

Inrush current

protection circuit

Rectifier/

smoothing circuit

AC (L)

AC (N)

Rectifier/

smoothing

circuit

Noise filter

Control circuit

Overcur-

rent

detection

circuit

100 or 200 V

(selected

automatically)

Overvolt-

age

detector

S82J

S82J-30024@ (300 W)

Parallel operation selector

100/200 V (selectable)

Fuse (10 A)

Noise filter

Detection

circuit

Photocoupler

DC Output

Input

Inrush current

protection circuit

Rectifier/

smoothing circuit

Control

circuit

Overcurrent

detection circuit

Rectifier/

smoothing circuit

Overvoltage

detection

circuit

Note: Short-circuit the input voltage selector

terminals if the input is 100 to 120 VAC.

Keep the terminals open if the input is

200 to 230 VAC.

Fan

S82J-60024@ (600 W)

Parallel operation selector

100/200 V (selectable)

Noise filter

Detection

circuit

Photocoupler

DC Output

Input

Fuse (20 A) Rectifier/

smoothing circuit

Inrush current

protection circuit

Control

circuit

Overcurrent

detection circuit

Overheat

detection circuit

Rectifier/

smoothing circuit

Overvoltage

detection

circuit

Note: Short-circuit the input voltage selector

terminals if the input is 100 to 120 VAC.

Keep the terminals open if the input is 200

to 230 VAC.

S82J

Construction and Nomenclature

■Nomenclature

10-/25-/50-/100-/150-W Models

300-W Models

1. DC Output Terminals (+V), (−V): Connect the load lines

to these terminals.

2. AC Input Terminals (L), (N): Connect the input lines to

these terminals.

Note: 1. The fuse is located on the (L) side. It is NOT user

replaceable.

2. For DC input (10-W, 25-W models), use the (L)

terminal as the positive terminal.

3. Protective Earthing Terminal ( ): Connect the ground

line to this terminal.

4. Input Voltage Selector Terminals: Short-circuit the

terminals if the input is 100 to 120 VAC and open the

terminals if the input is 200 to 230 VAC

5. Output Indicator (DC ON: Green): Lights while a Direct

Current (DC) output is ON.

6. Output Voltage Adjuster (V.ADJ): It is possible to

increase or decrease the output voltage by 10%.

7. Protection-ON Alarm Indicator (DC ON: Red): The red

indicator will be lit if the overvoltage (for a 300-/600-W

model) or overheat protection (for a 600-W model) circuit

is triggered. This indicator will also be lit when overload

(for a 600-W model) is detected.

8. Selector of Parallel Operation: Set the selector to

PARALLEL if the Units are in parallel operation.

600-W Models

−V

AC (L)

AC (N)

−V

1AC (L)

AC (N)

Side view

165 7

423

AC (L) AC (N)

Side view

−V+V−V+V

S82J

Engineering Data

■Derating Curve

(for Standard Mounting)

10-/25-/50-/100-/150-W Model

300-W Model

Note: Provide a minimum clearance of 20 mm between the Power Supplies.

600-W Model

Note: Provide a minimum clearance of 20 mm between the Power Supplies.

Natural air-cooling

Open-frame Type

Load ratio (%)

Ambient temperature (°C)

Covered Type

Load ratio (%)

Ambient temperature (°C)

Standard Mounting

Forced air-cooling (1 m3/min) Forced air-cooling

(1 m3/min)

Note: The derating curve shown is for

standard mounting. The derating

curve depends on the mounting

direction of the Power Supply.

120 120

100 100

Single-unit Operation Parallel Operation Standard Mounting

20 mm min. 20 mm min.

Load ratio (%)

Ambient temperature (°C)

Load ratio (%)

Ambient temperature (°C)

Forced air-cooling

(1 m3/min)

(Standard mounting)

Natural air-cooling

(Standard mounting)

Forced air-cooling

(1 m3/min)

(Side mounting)

Natural cooling

(Side mounting)

Forced air-cooling

(1 m3/min)

(Standard mounting)

Natural air-cooling

(Standard

mounting)

Forced air-cooling

(1 m3/min)

(Side mounting)

Natural cooling

(Side mounting)

120

100

120

Single-unit Operation Parallel Operation Standard Mounting

Load ratio (%)

Ambient temperature (°C)

Load ratio (%)

Ambient temperature (°C)

20 mm min. 20 mm min.

S82J

■Overload Protection

10- to 300-W Models

The Power Supply is provided with an overload protection function

that protects the Power Supply from possible damage by overcurrent.

When the output current rises above 105% to 160% of the rated

output current, the protection function is triggered, automatically

decreasing the output voltage. When the output current falls within

the rated range, the overload protection function is automatically

cleared.

The values shown in the above diagrams are for reference only.

Note: 1. If the S82J is connected to a load with a built-in DC-DC

converter, the overload protection function may be triggered

at startup, and consequently the S82J may not operate.

2. Internal parts may occasionally deteriorate or be damaged

if a short-circuited or other overcurrent state continues

during operation.

Eliminate the overcurrent state as soon as possible.

3. In actual operation, the output voltage may not fall to 0 V

when the overload protection function is triggered. Even

with short-circuits on the load side, the drop in voltage will

vary depending on factors such as the impedance in the

load line.

4. The overload protection function is specified at 105% or

more of the rated output current for 300-W models.

600-W Models

If an excessive current flows for 5 s or more, the output will be turned

OFF and simultaneously the protection-ON alarm indicator will be lit.

To reset the S82J, turn OFF the power, leave the S82J for at least

three minutes, and then turn it ON again.

Note: Internal parts may occasionally deteriorate or be damaged if a

short-circuited state continues during operation.

Eliminate the overcurrent state as soon as possible.

■Overvoltage Protection

100-W (5-, 24-V Output) Models

Consider the possibility of an overvoltage and design the system so

that the load will not be subjected to an excessive voltage even if the

feedback circuit in the Power Supply fails. When an excessive

voltage that is approximately 120% of the rated voltage or more is

output, the output voltage is shut OFF, preventing damage to the load

due to overvoltage. Reset the input power by turning it OFF for at

least one minute and then turning it back ON again.

The values shown in the above diagram are for reference only.

300- and 600-W Models

When an excessive voltage that is approximately 120% of the rated

voltage or more is output, the output voltage will be turned OFF and

simultaneously the protection-ON alarm indicator will be lit. Reset the

input power by turning it OFF for at least three minutes (90 seconds

for 300-W models) and then turning it back ON again.

■Overheat Protection Function

600-W Models Only

If the internal temperature rises excessively as a result of fan failure

or any other reason, the overheat protection circuit will be triggered

to protect the internal parts and simultaneously the protection-ON

alarm indicator will be lit. Reset the input power by turning it OFF for

at least three minutes and then turning it back ON again.

■Inrush Current, Startup Time,

Hold Time

Note: Models with a 100 to 240 V (free) input have a higher inrush

current energy than models with a single rated input voltage or

models with a switchable input voltage. Be sure to coordinate

breaker with the inrush current energy.

10 W, 25 W Models

50 W, 100 W (24-V) Models

100 W (5-V, 12-V, 15-V), 150 W, 300 W Models

Output current (%)

10050

Intermitted operation

Output voltage (V)

500 100

Output current (%)

Intermitted operation

Output voltage (V)

0 10050

Output voltage (V)

Output current (%)

Output interrupted

0100

Output current (%)

Output voltage (V)

Voltage

adjustable range

Output voltage (V)

Rated output

voltage

Overvoltage

protection

operates

90% 96.5%

Input ON Input OFF

Startup time

Inrush current on input application

AC input

voltage

AC input

current

Output

voltage Hold time

(20 ms min.)

S82J

Dimensions

Note: All units are in millimeters unless otherwise indicated.

Open-frame type and covered type have the same dimensions.

■Front-mounting Bracket Models

S82J-010@@@ (10 W)

S82J-025@@@ (25 W)

S82J-050@@@ (50 W)

82±0.5

65±0.5

78±0.5

Side Mounting

Bottom Mounting

Two, M3

Mounting Holes

(Surface Screw Mounting)

112±0.5

65±0.5

116±0.5

Side Mounting

Bottom Mounting

Two, M3

Mounting Holes

(Surface Screw Mounting)

AC AC+V −V

Protective earthing terminal PE

−V

Output voltage adjuster (V. ADJ)

Output indicator (Green)

AC (L)

AC (N)

DC output terminal

Input terminal

90±1

97±1

3.5

65±0.5

82±0.5

3.5 dia.

12 max.

3.5 dia.

6.5

50±0.5

78±0.5

35±1

3.5

17.5 28

Two, M 3

8.2

9.5

Five, M3.5

Nameplate

8.2

9.5

Five, M3.5

Nameplate

8.2

9.5

Five, M3.5

Nameplate

AC AC+V −V

3.5 dia.

12 max. 161±1

3.5

65±0.5

97±1

153±0.5

20±0.5

6.5 150.5±0.5

3.5 dia.

Three, M3 40±1

3.5

Protective earthing terminal PE

−V

Output voltage adjuster (V. ADJ)

Output indicator (Green)

AC (L)

AC (N)

DC output terminal

Input terminal

127±0.5

153±0.5

65±0.5

150.5±0.5

Side Mounting

Bottom Mounting

Two, M3

Mounting Holes

(Surface Screw Mounting)

AC AC+V −V

Protective earthing terminal PE

−V

Output voltage adjuster (V. ADJ)

Output indicator (Green)

AC (L)

AC (N)

DC output terminal

Input terminal

3.5

116±0.5

12 max. 124±1

3.5 dia.

6.5 112±0.5

3.5 dia.

40±1

3.5

17.5

Three, M3

83±0.5

21.5

65±0.5

97±1

S82J

162±0.5

65±0.5

160±0.5

Two, M4

Mounting Holes

(Surface Screw Mounting)

Side Mounting

Bottom Mounting

S82J-10024@

(100 W, 24-V Output)

Five, M3.5

Nameplate

Protective earthing terminal PE

−V

Output voltage adjuster (V. ADJ)

Output indicator (Green)

AC (L)

AC (N)

DC output terminal

Input terminal

12 max. 170±

65±

0.5

97±

162±

0.5

4.5 dia.

25±

0.5

50±

28±

0.5

Three, M4

4.5 dia.

160±

0.5

100±

0.5

4.5

8.2

9.5

27.5

4.5

6.5

180±0.5

82±0.8

178±0.5

4.5 dia.

Mounting holes (on both sides)

Side Mounting

Bottom Mounting

Two, M4

S82J-100@@@

(100 W, 5-/12-/15-V Output)

S82J-15024@ (150 W)

Three, M4

(depth: 6 max.)

Mounting Holes

(Surface Screw Mounting)

188

4.5

89±0.5 97

3±0.25

4.5

25±0.5

55±0.3

100±0.5

27.5±0.3 35±0.3

180±0.5

178±0.5

7±0.3

Eight, M4

8.1

9.5

4 max.

198 (see note)

4.5 dia.

150±0.5

50±0.5

150±0.5

100±0.5

S82J-30024@ (300 W)

Four, M4 holes (depth: 8 max.)

Nine, M4 terminal screws

Side

Side Mounting

Bottom Mounting

Four, 4.5 dia.

Eight, M4 holes

(depth: 8 max.

on both sides)

Mounting Holes

(Surface Screw Mounting)

-V

OUTPUT

SHORT BAR

INPUT 50/60Hz

MADE IN JAPAN

AC100-120V 8A

AC200-230V 4A

OMRON Corporation

VOLTAGE SELECT

SHORT 100-120V

OPEN 200-230V

POWER SUPPLY

DC ON

V. A DJ

DC24V 14A

ALM

OPERATION

PARALLEL SINGLE

120±1

150±

0.5

100±

0.5

50±

0.5

150±

0.5

181±

(19)

92±

8.6

S82J

■Dimensions with Mounting Brackets

Note: Panel mounting screw are not supplied.

Front-mounting Bracket (Supplied)

150±0.5

50±0.5

150±0.5

100±0.5

S82J-60024@ (600 W)

Four, M4 holes (depth: 8 max. on one side)

Nine, M4 terminal screws

Side Mounting

Bottom Mounting

Four, 4.5 dia.

Mounting Holes

(Surface Screw Mounting)

Eight, M4 holes

(depth: 8 max.

on both sides)

Four, M4 holes

(depth: 8 max.)

Material: Stainless steel

(b)

(a)

Mounting bracket

Power supply unit

Mounting Holes

Two, M3

1.5 11

520

31.5

20.5

4.7

4.6

15±0.2

4.6

t=1.0

Two,

3.5 dia.

Attach the mounting bracket to the

panel and loosely tighten the two

screws. Insert the projected parts

of the bracket (b) to the square

holes of the power supply (a).

Then securely tighten the screws.

Using the Mounting BracketFor 10-/25-/50-/100 (24 V)-W Models

Note: The mounting screws are

not provided.

30±0.5

110±0.5

1.5

6.5

t=0.8

23.5

Mounting bracket

120 max.

Two, 5 dia.

Attaching the Mounting Brackets

5 dia.

Dimensions with Mounting Brackets

For 100- (5, 12, 15 V) and 150-W Models

Note: The brackets are for front-mounting.

S82J

300-W and 600-W Models

Note: A mounting bracket is included with the S82J-30024 and S82J-60024, but not with the S82J-30024N and S82J-60024N.

Note: To provide ventilation

space, the body will shift

forward by 21.6 mm from

the mounting surface.

Note: To provide ventilation space,

the body will shift forward by

23.6 mm from the mounting

surface.

145±0.5

90±0.5 Four, M4

145±0.5

140±0.5 Four, M4

t=1.6

15 30

7.5 7.5

160

145±0.5

R2.5

10 dia.

36.4±0.2

Four, 5 dia.

Note: Mounting Brackets are provided

in a set, one for the right side

and one for the left side.

Dimensions with Mounting Brackets

For 300-W Models

Dimensions with Mounting Brackets

For 600-W Models

Attaching the Mounting Brackets

For 300-W Models

Attaching the Mounting Brackets

For 600-W Models

For 300-W Models (S82Y-J30F)

S82J

■DIN Rail Mounting Bracket Models

Note: All units are in millimeters unless otherwise indicated. The open-frame type and connected type have the same dimensions.

S82J-010@@@D (10 W)

S82J-025@@@D (25 W)

(Sliding: 9 max.)

7 max. 12 max.

Five, M3.5

S82J-050@@@D (50 W)

(Sliding: 9 max.)

S82J-10024@D

(100 W, 24-V Output)

7 max. 12 max.

Five, M3.5

S82J

(Sliding: 9 max.)

S82J-100@@@D (100 W, 5-/12-/15-V Output)

S82J-15024@D (150 W)

7 max.

4 max.

Eight, M4

S82J

■Front-mounting Bracket for S82J-10024A/-10024D Power Supply

(Order Separately) (Unit: mm)

Note: This Front-mounting Bracket cannot be used with S82J 100-W (5, 12, or 15-V) or 150-W models.

■DIN Rail Mounting Bracket (Order Separately)

Can be used with 10-W to 150-W Front-mounting bracket models.

If DIN Rail mounting is necessary, use a DIN Rail Mounting Bracket.

■DIN Rail (Order Separately)

Note: All units are in millimeters unless otherwise indicated.

Mounting Rail (Material: Aluminum)

Product Model number Dimensions Mounting hole dimensions

Front-mounting

Bracket

S82Y-J10F

180

t=1.6

Three, 4.5-dia. holes

Three, M4

1515

Model Power Rating Applicable Quick-

mounting Base

S82J 10 W S82Y-01N

25 W S82Y-03N

50 W S82Y-05N

100 W, 150 W S82Y-10N

Mounting rail

Two, 4.5-dia. holes

47 4.9

(Sliding: 7 max.)

PFP-100N

(or PFP-100N2)

Quick-mounting base

Main unit

47 104

Panel thickness (t): 1.6 mm

Size

Note: The L2 dimension refers to using

the PFP-100N on a DIN rail. When

using the PFP-100NS, add

10.5 mm to L2.

Model L1 L2 (See

note.)

S82Y-01N 113 114.8

S82Y-03N 143 144.8

S82Y-05N 163 164.8

S82Y-10N 185 186.8

1,000 (500) *

15(5) *

*Values in parentheses

are for the PFP-50N.

PFP-100N

PFP-50N

4.5

15 25 25

10 10

25 25

35±

0.3

7.3±

0.15

27±

0.15

PFP-100N2

4.5

15 25 25

10 10

1,000

25 25 15 1 1.5

29.2242735±0.3

S82J

Safety Precautions

Refer to Safety Precautions for All Power Supplies.

!CAUTION

■Precautions for Safe Use

Mounting

To improve and maintain the reliability of the Power Supply over a

long period of time, adequate consideration must be given to heat

radiation.

The Power Supply is designed to radiate heat by means of natural

air-flow. Therefore, mount the Power Supply so that air flow takes

place around the Power Supply.

When mounting the Power Supply, mounting it to a metal plate is

recommended.

When mounting two or more Power Supplies side-by-side, allow at

least 20 mm spacing between them, as shown in the following

illustration.

Forced air-cooling is recommended.

Mounting Methods

The following mounting methods are available.

10-/25-/50-/100 (24-V Output)-W Models

(A) Side mounting

(B) Bottom mounting

Note: Refer to the section on the Mounting Bracket.

100 (-5, -12, -15 V Output)/150-/300-/600-W

Models

The following 4 mounting methods are possible.

(A) Side mounting

(B) Bottom mounting (secured with screws from the inside of the

Switching Power Supply) (except for 300- and 600-W models)

Switching Power Supply)

(D) Front mounting

Front mounting is possible with the mounting brackets provided.

Refer to Dimensions on page 11.

Wiring

Connect the ground completely. Electric shock or malfunction may

occur if the ground is not connected completely.

Tighten terminal screws to the following specified torque.

Do not apply more than 75-N force to the terminal block when

tightening it.

Minor electric shock, fire, or Product failure may

occasionally occur. Do not disassemble, modify, or repair

the Product or touch the interior of the Product.

Minor burns may occasionally occur. Do not touch the

Product while power is being supplied or immediately

after power is turned OFF.

Fire may occasionally occur. Tighten terminal screws to

the specified torque 0.74 N·m for 10-, 25-, 50-, or 100-W

models (24-V output); or 1.08 N·m for 100- (5-, 12-, or 15-

V output), 150-, 300-, or 600-W models.

Minor injury due to electric shock may occasionally occur.

Do not touch the terminals while power is being supplied.

Minor electric shock, fire, or Product failure may

occasionally occur. Do not allow any pieces of metal or

conductors or any clippings or cuttings resulting from

installation work to enter the Product.

Air

Metal plate

20 mm min.

(B)

(A)

Capacity Terminal

screws

Torque

10-, 25-, 50-, or 100-W (24 V) M3.5 0.74 N·m

100-W (5-, 12-, or 15-V), 150-, 300-, 600-W M4 1.08 N·m

(A)

(B)

(C)

Metal plate

Mounting brackets

(provided)

S82J

Switching the AC Input Voltage

between 100 and 200 V (300- and 600-W

Models)

The input voltage can be switched between 100 and 200 V by

shorting or opening the input voltage selection terminals. Set the

required voltage as shown below. (The voltage is factory-set to

200 V.)

Note: A 300-W Model is shown above.

Series Operation

Only models with power ratings of 50, 100 (-5, -12, -15, 24-output),

150, 300, or 600-W allow series operation.

Up to two of the above Power Supplies can be used in series

operation. Models other than the above Power Supplies cannot be

used in series operation.

If series operation is attempted for other models, the output from one

of the Power Supplies may not come ON when the AC input is

applied. If that occurs and the Power Supplies are left in that state,

internal circuits may be damaged.

Although Power Supplies having different output capacities and

different output voltages can be connected in series, the current

flowing through the load must not exceed the smaller rated output

current.

With the S82J-05024@@ or S82J-10024@@, if the load is shorted a

reverse voltage may result in the Power Supply causing deterioration

and damage. It is recommended that diodes are connected as

shown in the previous diagram (D1, D2).

Parallel Operation

Only 300- and 600-W models can be in parallel operation. Do not

operate any other models in parallel. The output of the models in

parallel operation is a maximum of 80% of the rated output.

Set the parallel operation selector to PARALLEL if the Units are in

parallel operation and make sure that the thickness and the length of

all wires connected to the load are the same to ensure that the wires

will have no voltage drop differences.

If you adjust the voltage using the output voltage adjuster (V.ADJ),

adjust the output voltage from both Power Supplies.

Fan Replacement

The service life of the fan is approximately 50,000 hours (at 25°C).

The service life varies, however, depending on the ambient

temperature or other surrounding environmental conditions such as

dust. As a preventive maintenance measure, replace the fan within

approx. two years if it is used at an ambient temperature of 40°C.

Fans are available as replacements.

Fan Set:

Fan (above), four M4 x 35 sems screws, instruction sheet, and

packing case

Replace the fan as shown in the following illustration.

Model Output capacity Rated output voltage

S82J 100 W 5, 12, 15, 24 VDC

50, 150, 300, 600 W 24 VDC

Type Schottky barrier diode

Dielectric strength

(VRRM)

Twice the rated output voltage or

above

Forward current (IF) Twice the rated output current or

above

SHORT BAR

MADE IN JAPAN

OMRON Corporation

VOLTAGE SELECT

SHORT 100-120V

OPEN 200-230V

100-V input

SHORT BAR

MADE IN JAPAN

OMRON Corporation

VOLTAGE SELECT

SHORT 100-120V

OPEN 200-230V

200-V input

Short with the short bar. Remove the short bar

and leave the terminals open.

INPUT

V2D2

VLV1V2

−V

INPUT

−V

Load

Model: S82Y-JFAN

In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Read and Understand This Catalog

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or

comments.

Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)

from date of sale by OMRON.

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR

FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS

DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS

IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT

LIABILITY.

In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.

IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS

OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT

SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's

application or use of the products.

At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the

products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,

machine, system, or other application or use.

The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible

uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:

•

Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.

•

Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,

safety equipment, and installations subject to separate industry or government regulations.

•

Systems, machines, and equipment that could present a risk to life or property.

Please know and observe all prohibitions of use applicable to the products.

NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE

SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND

INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

Disclaimers

CHANGE IN SPECIFICATIONS

Product specifications and accessories may be changed at any time based on improvements and other reasons.

It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.

However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or

establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual

specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the

result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON

Warranty and Limitations of Liability.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,

typographical, or proofreading errors, or omissions.

2011.1

In the interest of product improvement, specifications are subject to change without notice.

OMRON Corporation

Industrial Automation Company

http://www.ia.omron.com/