KBP005M/3N246 - KBP10M/3N252 KBP005M/3N246 - KBP10M/3N252 Features * Surge overload rating: 50 amperes peak. * Reliable low cost construction utilizing molded plastic technique. * UL certified, UL #E111753. + ~ ~ - KBPM Bridge Rectifiers Absolute Maximum Ratings* TA = 25C unless otherwise noted Value Symbol Parameter 005M 246 01M 247 02M 248 04M 249 06M 250 08M 251 10M 252 Units VRRM Maximum Repetitive Reverse Voltage 50 100 200 400 600 800 1000 V VRMS Maximum RMS Bridge Input Voltage 35 70 140 280 420 560 700 V VR DC Reverse Voltage 50 100 200 400 600 800 1000 V IF(AV) Average Rectified Forward Current, @ TA = 50C Non-repetitive Peak Forward Surge Current IFSM Tstg TJ (Rated VR) 1.5 A 50 A Storage Temperature Range -55 to +165 C Operating Junction Temperature -55 to +165 C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Thermal Characteristics Symbol Value Units PD Power Dissipation Parameter 3.5 W RJA Thermal Resistance, Junction to Ambient,* per leg 40 C/W *Device mounted on PCB with 0.47 x 0.47" (12 x 12 mm). Electrical Characteristics Symbol VF IR CT TA = 25C unless otherwise noted Parameter Forward Voltage, per bridge @ 1.0 A @ 3.14 A Reverse Current, total bridge @ rated VR TA = 25C TA = 100C I2t rating for fusing t < 8.35 ms Total Capacitance, per leg VR = 4.0 V, f = 1.0 MHz 2001 Fairchild Semiconductor Corporation Device Units 1.0 1.3 V V 5.0 500 A A 10 A2s 15 pF KBP005M/3N246-KBP10M/3N252, Rev. C (continued) Typical Characteristics 5 Forward Current, IF [A] Average Rectified Forward Current, IF [A] 2.0 1.5 1.0 0.5 TYPICAL DISTRIBUTION 1 MEDIAN 0.1 0.01 0.0 0 50 100 150 0 0.2 Ambient Temperature [C] Reverse Current, IR [mA] 100 10 TA = 25 C 1 0.1 0 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage [%] Figure 3. Reverse Current vs Reverse Voltage 2001 Fairchild Semiconductor Corporation 1.2 1.4 Figure 2. Forward Voltage Characteristics Peak Forward Surge Current, IFSM [A] Figure 1. Forward Current Derating Curve 0.4 0.6 0.8 1 Forward Voltage, V F [V] 50 40 30 20 10 0 1 2 5 10 20 50 Number of Cycles at 60Hz 100 Figure 4. Non-Repetitive Surge Current KBP005M/3N246-KBP10M/3N252, Rev. C KBP005M/3N246 - KBP10M/3N252 Bridge Rectifiers TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DenseTrenchTM DOMETM EcoSPARKTM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM FAST FASTrTM FRFETTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM LittleFETTM MicroFETTM MicroPakTM MICROWIRETM OPTOLOGICTM OPTOPLANARTM PACMANTM POPTM Power247TM PowerTrench QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM SILENT SWITCHER SMART STARTTM STAR*POWERTM StealthTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM TruTranslationTM UHCTM UltraFET VCXTM STAR*POWER is used under license DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant into support device or system whose failure to perform can the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. H4