EVALUATION KIT AVAILABLE MAX2687/MAX2689/MAX2694 GPS/GNSS Low-Noise Amplifiers General Description The MAX2687/MAX2689/MAX2694 low-noise amplifiers (LNAs) are designed for GPS L1, Galileo, and GLONASS applications. Designed in Maxim's advanced SiGe process, the devices achieve high gain and low noise figure while maximizing the input-referred 1dB compression point and the 3rd-order intercept point. The MAX2687/ MAX2689/MAX2694 provide high gains of 12dB, 15dB, and 18dB, respectively. Each is optimized for high linearity. The devices operate from a +1.6V to +3.6V single supply. The optional shutdown feature in the devices reduces the supply current to less than 10FA. The devices are available in a very small, lead-free, RoHS-compliant, 0.86mm x 0.86mm x 0.65mm wafer-level package (WLP). Features S High Power Gain: 17.8dB (MAX2687) S Low Noise Figure: 0.85dB (MAX2687) S Integrated 50 Output Matching Circuit S Low Supply Current: 4.5mA (MAX2694) S Wide Supply Voltage Range: 1.6V to 3.6V S Low Bill of Materials: One Inductor, Two Capacitors S Small Footprint: 0.86mm x 0.86mm S 0.4mm-Pitch Wafer-Level Package (WLP) Applications Telematics (Asset Tracking and Management) Ordering Information appears at end of data sheet. Personal Navigation Devices (PNDs) Cellular Phones with GPS Notebook PCs/Ultra-Mobile PCs Recreational, Marine Navigation Avionics Watches Digital Cameras Typical Application Circuit VCC VCC A1 A2 RFOUT C2 RF INPUT C1 R1 25kI MAX2687 MAX2689 MAX2694 L1 RFIN B1 MAX2687 MAX2694 L1 = 4.7nH C1 = 100nF C2 = 10pF RF OUTPUT SHDN OPTIONAL SHUTDOWN B2 GND MAX2689 L1 = 5.8nH C1 = 100nF C2 = 10pF For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim's website at www.maximintegrated.com. 19-6040; Rev 2; 10/13 MAX2687/MAX2689/MAX2694 GPS/GNSS Low-Noise Amplifiers ABSOLUTE MAXIMUM RATINGS VCC to GND...........................................................-0.3V to +3.6V Other Pins to GND................-0.3V to (+ Operating VCC + 0.3V) Maximum RF Input Power................................................ +5dBm Continuous Power Dissipation (TA = +70C) 4-Bump WLP (derates 9.7mW/C above +70C).........776mW Maximum Current into RF Input..........................................10mA Operating Temperature Range........................... -40C to +85C Junction Temperature......................................................+150C Storage Temperature Range............................. -65C to +160C Soldering Temperature (reflow) (Note 1).........................+260C Note 1: Refer to Application Note 1891: Wafer-Level Packaging (WLP) and Its Applications. CAUTION! ESD SENSITIVE DEVICE Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. PACKAGE THERMAL CHARACTERISTICS (Note 2) WLP Junction-to-Ambient Thermal Resistance (qJA).........103C/W Note 2: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer board. For detailed information on package thermal considerations, refer to www.maximintegrated.com/thermal-tutorial. DC ELECTRICAL CHARACTERISTICS (MAX2687/MAX2689/MAX2694 EV kit, VCC = 1.6V to 3.6V, TA = -40NC to +85NC, no RF signals are applied. Typical values are at VCC = 2.85V and TA = +25NC, unless otherwise noted.) (Note 3) PARAMETER CONDITIONS Supply Voltage Supply Current SHDN = high MIN TYP MAX UNITS 1.6 2.85 3.6 V MAX2687 7.6 MAX2689 7.6 MAX2694 4.5 Digital Input Logic-High Shutdown mode, VSHDN = 0V (Note 4) Digital Input Logic-Low (Note 4) mA 20 1.2 A V 0.45 V AC ELECTRICAL CHARACTERISTICS (MAX2687/MAX2689/MAX2694 EV kit, VCC = 1.6V to 3.6V, TA = -40NC to +85NC, fRFIN = 1575.42MHz. Typical values are at VCC = 2.85V and TA = +25NC, unless otherwise noted.) (Note 3) PARAMETER RF Frequency CONDITIONS VCC = 2.85V (Note 5) Power Gain VCC = 1.6V 2 MIN L1 band TYP 1575.42 MAX2687 14.7 MAX2689 12.1 15.1 MAX2694 8.9 11.6 MAX2687 14.0 17.7 MAX2689 11.8 15 MAX2694 8.7 11.5 MAX UNITS MHz 17.8 dB Maxim Integrated MAX2687/MAX2689/MAX2694 GPS/GNSS Low-Noise Amplifiers AC ELECTRICAL CHARACTERISTICS (continued) (MAX2687/MAX2689/MAX2694 EV kit, VCC = 1.6V to 3.6V, TA = -40NC to +85NC, fRFIN = 1575.42MHz. Typical values are at VCC = 2.85V and TA = +25NC, unless otherwise noted.) (Note 3) PARAMETER CONDITIONS MAX2687 Noise Figure In-Band 3rd-Order Input Intercept Point VCC = 1.6V to 3.3V (Note 6) Out-of-Band 3rd-Order Input Intercept Point (Note 7) Input 1dB Compression Point (Note 8) MAX2687 Input Return Loss Output Return Loss Reverse Isolation MIN TYP MAX UNITS 0.85 MAX2689 1.2 MAX2694 0.97 MAX2687 5.5 MAX2689 5.1 MAX2694 6.85 MAX2687 9.146 MAX2689 8 MAX2694 8.644 MAX2687 -9.3 MAX2689 -8.9 MAX2694 -2.25 dB dBm dBm dBm 7.8 MAX2689 9 MAX2694 16.8 MAX2687 20.7 MAX2689 15.2 MAX2694 11.6 MAX2687 43.9 MAX2689 43.3 MAX2694 21.5 dB dB dB in and max limits guaranteed by test at TA = +25C and guaranteed by design and characterization at TA = -40C and Note 3: M TA = +85C, unless otherwise noted. Note 4: Min and max limits guaranteed by test at TA = +25C. Note 5: Min limit guaranteed by design and characterization. Note 6: Measured with the two tones located at 1MHz and 2MHz offset from the center of the GPS band with -27dBm/tone for the MAX2687, -30dBm/tone for the MAX2689, and -24dBm/tone for the MAX2694. Note 7: Measured with input tones at 1713MHz (-27dBm) and 1851MHz (-39dBm). Note 8: Measured with a tone located at the center of the GPS band. Maxim Integrated 3 MAX2687/MAX2689/MAX2694 GPS/GNSS Low-Noise Amplifiers Typical Operating Characteristics (MAX2687/MAX2689/MAX2694 EV kit. Typical values are at VCC = 2.85V, TA = +25C, and fRFIN = 1575.42MHz, unless otherwise noted.) MAX2687 18 16 12 -10 -12 -40 10 8 -14 6 -16 4 -18 2 -20 -60 -70 0 500 1000 1500 2000 FREQUENCY (MHz) 2500 -80 500 500 8 16 12 6 TA = +25C 4 fTONE 1 = 1713MHz PTONE 1 = -27dBm fTONE 2 = 1851MHz PTONE 2 = -39dBm 14 IIP3 (dBm) IIP3 (dBm) -10 1500 TA = +85C 2 1000 500 1500 2000 2500 FREQUENCY (MHz) -14 MAX2687 toc07 MAX2687 toc08 0 -5 -12 -13 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 SUPPLY VOLTAGE (V) 1dB GAIN DESENSE vs. BLOCKER FREQUENCY TA = +85C TA = -40C |BLOCKER POWER| (dBm) INPUT P1dB (dBm) -11 TA = +25C -40C 4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 SUPPLY VOLTAGE (V) INPUT P1dB vs. SUPPLY VOLATAGE AND TEMPERATURE -10 +85C +25C 6 0 -25 2500 10 8 -50 -20 2000 OUT-OF-BAND IIP3 vs. SUPPLY VOLTAGE AND TEMPERATURE TA = -40C -5 1000 FREQUENCY (MHz) MAX2687 toc05 0 2500 1500 2000 FREQUENCY (MHz) 10 MAX2687 toc04 5 1000 IN-BAND IIP3 vs. SUPPLY VOLATAGE AND TEMPERATURE OUTPUT RETURN LOSS vs. FREQUENCY |S22| (dB) -50 MAX2687 toc06 14 -8 -30 |S12| (dB) -6 GAIN (dB) |S11| (dB) -4 -20 MAX2687 toc02 MAX2687 toc01 -2 REVERSE ISOLATION vs. FREQUENCY GAIN vs. FREQUENCY 20 MAX2687 toc03 INPUT RETURN LOSS vs. FREQUENCY 0 -10 -15 -20 -25 -15 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 SUPPLY VOLTAGE (V) -30 500 1000 1500 2000 2500 BLOCKER FREQUENCY (MHz) 4 Maxim Integrated MAX2687/MAX2689/MAX2694 GPS/GNSS Low-Noise Amplifiers Typical Operating Characteristics (continued) (MAX2687/MAX2689/MAX2694 EV kit. Typical values are at VCC = 2.85V, TA = +25C, and fRFIN = 1575.42MHz, unless otherwise noted.) MAX2694 12 -20 -25 10 -20 8 -25 6 4 -35 2 -40 0 -45 -2 -30 500 1000 1500 2000 -50 1000 500 2500 FREQUENCY (MHz) 2500 16 14 2000 fTONE 1 = 1713MHz PTONE 1 = -27dBm fTONE 2 = 1851MHz PTONE 2 = -39dBm 12 +25C IIP3 (dBm) IIP3 (dBm) +85C -5 1500 2500 OUT-OF-BAND IIP3 vs. SUPPLY VOLTAGE AND TEMPERATURE MAX2687 toc13 MAX2687 toc12 9 8 1000 500 FREQUENCY (MHz) 10 0 |S22| (dB) 1500 2000 FREQUENCY (MHz) IN-BAND IIP3 vs. SUPPLY VOLTAGE AND TEMPERATURE OUTPUT RETURN LOSS vs. FREQUENCY 5 -30 MAX2687 toc14 -15 -15 |S12| (dB) GAIN (dB) |S11| (dB) -10 -10 MAX2687 toc10 MAX2687 toc09 -5 REVERSE ISOLATION vs. FREQUENCY GAIN vs. FREQUENCY 14 MAX2687 toc11 INPUT RETURN LOSS vs. FREQUENCY 0 7 +85C 10 +25C 8 -10 -40C 6 6 4 5 -15 500 1000 1500 2000 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 SUPPLY VOLTAGE (V) 2500 FREQUENCY (MHz) INPUT P1dB vs. SUPPLY VOLTAGE AND TEMPERATURE -40C +85C -8 -5 -10 -15 -20 -25 -10 -30 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 SUPPLY VOLTAGE (V) Maxim Integrated MAX2687 toc16 +25C -4 -6 0 |BLOCKER POWER| (dBm) INPUT P1dB (dBm) -2 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 SUPPLY VOLTAGE (V) 1dB GAIN DESENSE vs. BLOCKER FREQUENCY MAX2687 toc15 0 -40C 500 1000 1500 2000 2500 BLOCKER FREQUENCY (MHz) 5 MAX2687/MAX2689/MAX2694 GPS/GNSS Low-Noise Amplifiers Typical Operating Characteristics (continued) (MAX2687/MAX2689/MAX2694 EV kit. Typical values are at VCC = 2.85V, TA = +25C, and fRFIN = 1575.42MHz, unless otherwise noted.) MAX2689 GAIN vs. FREQUENCY REVERSE ISOLATION vs. FREQUENCY -30 MAX2687 toc18 MAX2687 toc17 20 15 MAX2687 toc19 INPUT RETURN LOSS vs. FREQUENCY 0 -40 10 |S12| (dB) GAIN (dB) |S11| (dB) -10 5 -50 -20 -60 0 -5 -30 500 1000 1500 2000 -70 500 2500 1000 1500 2500 2000 1000 500 1500 2000 2500 FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz) OUTPUT RETURN LOSS vs. FREQUENCY IN-BAND IIP3 vs. SUPPLY VOLTAGE AND TEMPERATURE (TWO TONES LOCATED AT 1MHz AND 2MHz OFFSET WITH -30dBm / TONE) OUT-OF-BAND IIP3 vs. SUPPLY VOLTAGE AND TEMPERATURE (TONE 1 AT 1713MHz, -27dBm; TONE 2 AT 1851MHz, -39dBm) -5 5 MAX2687 toc22 12 MAX2687 toc21 6 MAX2687 toc20 0 10 TA = +85C -10 4 IIP3 (dBm) IIP3 (dBm) |S22| (dB) TA = -40C TA = +85C 8 TA = +25C -15 3 TA = +25C 6 TA = -40C -20 2 500 1000 1500 2000 2500 4 1.6 1.8 FREQUENCY (MHz) 2.0 2.2 2.4 2.6 2.8 3.0 3.2 TA = -40C -11 2.4 2.6 2.8 3.0 3.2 -5 -10 -15 -20 -12 -25 1.6 6 0 BLOCKER POWER (dBm) INPUT P1dB (dBm) TA = +25C 2.2 MAX2687 toc24 TA = +85C -9 2.0 1dB GAIN DESENSE vs. BLOCKER FREQUENCY MAX2687 toc23 -8 1.8 SUPPLY VOLTAGE (V) INPUT P1dB COMPRESSION vs. SUPPLY VOLTAGE AND TEMPERATURE -10 1.6 SUPPLY VOLTAGE (V) 1.8 2.0 2.2 2.4 2.6 2.8 SUPPLY VOLTAGE (V) 3.0 3.2 500 1000 1500 2000 BLOCKER FREQUENCY (MHz) 2500 Maxim Integrated MAX2687/MAX2689/MAX2694 GPS/GNSS Low-Noise Amplifiers Bump Configuration TOP VIEW MAX2687 MAX2689 MAX2694 + VCC A1 A2 RFOUT (SHDN) RFIN B1 B2 GND WLP Bump Description BUMP NAME A1 VCC FUNCTION A2 RFOUT (SHDN) B1 RFIN RF Input. Requires a DC-blocking capacitor and external matching components. B2 GND Ground. Connect to the PCB ground plane. Supply Voltage. Bypass to ground with a 10pF capacitor as close as possible to the IC. RF Output/SHDN Input. RFOUT is internally matched to 50I and pulled up to VCC through a 1MI resistor. SHDN is shared with the RFOUT bump. The devices are in active mode by default once VCC is applied. RFOUT(SHDN) can be pulled to a DC low through a 25kI resistor to shut down the IC. Detailed Description The MAX2687/MAX2689/MAX2694 are LNAs designed for GPS L1, Galileo, and GLONASS applications. The devices feature an optional power-shutdown control mode to eliminate the need for an external supply switch. The devices achieve high gain, low noise figure, and excellent linearity. Input and Output Matching The devices require an off-chip input matching. Only an inductor in series with a DC-blocking capacitor is needed to form the input matching circuit. The Typical Application Circuit shows the recommended inputmatching network. These values are optimized for the best simultaneous gain, noise figure, and return loss performance. The value of the input coupling capacitor Maxim Integrated affects IIP3. A smaller coupling capacitor results in lower IIP3. The devices integrate an on-chip output matching to 50I at the output, eliminating the need for external matching components. Tables 1 and 2 list typical device S parameters and Kf values. Typical noise parameters are shown in Tables 3 and 4. Shutdown The devices include an optional shutdown feature to turn off the entire chip. The devices are placed in active mode by default once VCC is applied, due to the on-chip pullup resistor to VCC at the RFOUT bump (shared with the SHDN input). To shut down the part, apply a logiclow to the RFOUT bump through an external resistor with an adequate value, e.g., 25kI, in order not to load the RF output signal during active operation. 7 MAX2687/MAX2689/MAX2694 GPS/GNSS Low-Noise Amplifiers Table 1. MAX2687 Typical S Parameter Values and K-Factor S11 S21 S12 S22 S21 MAG S12 MAG S22 MAG PHASE PHASE PHASE PHASE (dB) (dB) (dB) (DEGREES) (DEGREES) (DEGREES) (DEGREES) FREQ (MHz) S11 MAG (dB) 1000 -3.9 -91.5 10.1 164.7 -48.4 96.6 -2.2 -154.8 10.0 1100 -4.1 -97.6 11.7 152.8 -51.2 47.8 -2.9 -175.2 14.0 1200 -4.4 -103.6 13.3 136.5 -47.3 42.2 -3.9 164.0 9.6 1300 -4.3 -109.6 14.6 118.8 -53.1 80.2 -5.4 140.3 19.1 1400 -4.0 -116.9 15.6 102.3 -55.0 152.6 -7.5 112.1 23.4 1500 -3.9 -127.1 17.0 82.1 -45.7 119.1 -11.7 70.7 7.6 1575 -4.5 -133.3 17.3 63.7 -44.5 72.7 -18.1 15.0 7.3 1600 -4.7 -133.6 17.1 56.9 -46.9 36.4 -20.9 -18.1 10.1 1700 -4.2 -140.0 17.1 39.7 -48.8 77.8 -14.7 -100.3 11.4 1800 -4.2 -150.0 17.0 18.6 -41.6 76.6 -8.8 -137.7 4.3 Kf 1900 -4.5 -159.2 16.6 -1.5 -39.2 39.1 -5.6 -168.2 2.9 2000 -4.8 -166.3 15.5 -20.2 -37.6 17.5 -4.0 163.7 2.3 Table 2. MAX2689 Typical S Parameter Values and K-Factor 8 S11 S21 S12 S22 S21 MAG S12 MAG S22 MAG PHASE PHASE PHASE PHASE (dB) (dB) (dB) (DEGREES) (DEGREES) (DEGREES) (DEGREES) FREQ (MHz) S11 MAG (dB) 1000 -3.8 -93.0 6.0 150.9 -52.1 80.8 -1.9 -161.7 21.6 1100 -3.8 -100.5 7.7 140.7 -62.5 44.2 -2.4 -178.8 68.3 1200 -4.0 -107.8 9.3 124.7 -53.9 19.6 -3.2 164.4 26.5 1300 -3.9 -115.5 10.8 107.7 -56.2 55.3 -4.3 145.5 34.8 1400 -3.8 -124.9 12.1 89.7 -49.8 124.0 -6.5 124.1 17.5 1500 -4.2 -133.5 13.1 65.2 -43.4 53.2 -11.5 113.3 9.6 1575 -4.2 -136.3 12.9 50.7 -47.2 12.5 -14.7 120.9 15.6 1600 -4.1 -138.4 12.9 45.3 -48.3 12.9 -16.5 126.1 17.6 1700 -3.9 -146.3 13.1 25.9 -51.5 74.0 -16.0 -177.6 24.1 1800 -3.8 -155.2 12.7 5.3 -46.7 71.0 -9.8 -174.3 12.9 1900 -3.9 -163.6 12.2 -13.7 -42.9 43.0 -6.4 171.4 7.6 2000 -4.0 -170.6 11.2 -29.8 -41.6 27.0 -4.5 154.6 6.1 Kf Maxim Integrated MAX2687/MAX2689/MAX2694 GPS/GNSS Low-Noise Amplifiers Table 3. MAX2694 Typical S Parameter Values and K-Factor S11 S21 S12 S22 S21 MAG S12 MAG S22 MAG PHASE PHASE PHASE PHASE (dB) (dB) (dB) (DEGREES) (DEGREES) (DEGREES) (DEGREES) FREQ (MHz) S11 MAG (dB) 1000 -2.7 -106.3 5.8 145.8 -33.4 103.0 -2.2 -160.9 2.7 1100 -3.0 -117.0 7.1 133.6 -31.1 95.5 -2.8 -179.0 2.4 1200 -3.4 -127.6 8.5 117.1 -29.0 81.3 -3.8 163.5 2.1 1300 -4.0 -138.6 9.7 98.3 -26.8 67.7 -5.3 145.9 1.9 1400 -4.9 -149.8 10.3 79.8 -24.9 55.3 -7.6 130.7 1.8 1500 -6.2 -158.2 10.8 59.9 -22.9 36.8 -10.8 126.6 1.6 1575 -7.0 -159.5 10.7 46.2 -22.4 21.7 -12.3 132.7 1.6 1600 -7.2 -160.0 10.6 41.3 -22.5 17.5 -12.7 134.9 1.6 1700 -7.7 -163.0 10.6 23.5 -22.0 4.0 -12.9 150.7 1.5 1800 -8.2 -164.6 10.2 6.2 -21.3 -11.5 -10.3 158.0 1.4 Kf 1900 -8.1 -165.5 9.9 -11.7 -21.2 -26.8 -7.7 150.4 1.3 2000 -7.7 -167.3 9.0 -27.0 -20.9 -42.3 -5.9 137.5 1.2 Table 4. MAX2687 Typical Noise Parameters (VCC = 2.85V, TA = +25NC) FREQUENCY (MHz) FMIN (dB) 0.69 |GOPT| 0.26 |GOPT| ANGLE 66 RN (I) 1550 1560 0.69 0.26 66 5.27 1570 0.69 0.26 67 5.27 5.28 1575 0.69 0.25 67 5.26 1580 0.69 0.25 67 5.26 1590 0.70 0.25 68 5.26 1600 0.70 0.25 68 5.25 Table 5. MAX2689 Typical Noise Parameters (VCC = 2.85V, TA = +25NC) FREQUENCY (MHz) FMIN (dB) 0.80 |GOPT| 0.27 |GOPT| ANGLE 73 RN (I) 1550 1560 0.80 0.27 74 5.87 5.89 1570 0.81 0.27 74 5.86 1580 0.81 0.27 75 5.85 1590 0.81 0.27 75 5.84 1600 0.81 0.27 76 5.83 Maxim Integrated 9 MAX2687/MAX2689/MAX2694 GPS/GNSS Low-Noise Amplifiers Table 6. MAX2694 Typical Noise Parameters (VCC = 2.85V, TA = +25NC) FREQUENCY (MHz) FMIN (dB) 1550 0.75 |GOPT| 0.44 1560 0.75 0.44 |GOPT| ANGLE 48 RN (I) 48 9.04 1570 0.75 0.44 48 9.02 1575 0.75 0.43 49 9.01 1580 0.75 0.43 49 9.00 1590 0.75 0.43 49 8.98 1600 0.75 0.43 49 8.96 Ordering Information Applications Information A properly designed PCB is essential to any RF microwave circuit. Use controlled-impedance lines on all high-frequency inputs and outputs. Bypass VCC with decoupling capacitors located close to the device. For long VCC lines, it may be necessary to add decoupling capacitors. Locate these additional capacitors further away from the device package. Proper grounding of the GND bump is essential. If the PCB uses a topside RF ground, connect it directly to the GND bump. For a board where the ground is not on the component layer, connect the GND bump to the board with multiple vias close to the package. Refer to www.maximintegrated.com/datasheet/index. mvp/id/6932/t/do for the MAX2687/MAX2689/MAX2694 EV kit schematic, Gerber data, PADS layout file, and BOM information. Chip Information PROCESS: SiGe BiCMOS 10 9.06 PART TEMP RANGE PIN-PACKAGE MAX2687EWS+T -40NC to +85NC 4 WLP MAX2689EWS+T -40NC to +85NC 4 WLP MAX2694EWS+T -40NC to +85NC 4 WLP +Denotes a lead(Pb)-free/RoHS-compliant package. T = Tape and reel. Package Information For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that a "+", "#", or "-" in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. PACKAGE TYPE PACKAGE CODE OUTLINE NO. LAND PATTERN NO. 4 WLP W40A0+1 21-0480 Refer to Application Note 1891 Maxim Integrated MAX2687/MAX2689/MAX2694 GPS/GNSS Low-Noise Amplifiers Revision History REVISION NUMBER REVISION DATE 0 9/11 Initial release -- 1 5/12 Added MAX2689 to data sheet All 2 10/13 Revised AC Electrical Characteristics table 2 DESCRIPTION PAGES CHANGED Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance. Maxim Integrated 160 Rio Robles, San Jose, CA 95134 USA 1-408-601-1000 (c) 2013 Maxim Integrated Products, Inc. 11 Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Maxim Integrated: MAX2694EVKIT+ MAX2687EVKIT+ MAX2687EVKIT# MAX2694EVKIT# MAX2694EWS+T MAX2689EWS+T