MUR1620CT
ULTRAFAST RECTIFIERS
PRV : 200 Volts
Io : 8.0 Ampere
FEATURES :
* High current capability
* High surge current capability
* High reliability
* Low reverse current
* Low forward voltage drop
* Pb / RoHS Free
MECHANICAL DATA :
* Case : Epoxy, Molded
* Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
* Weight : 2.1 grams (Approximately)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at
25
°
.
SYMBOL VALUE UNIT
Maximum Repetitive Peak Reverse Voltage VRRM 200 V
Maximum Working Reverse Voltage VRWM 200 V
Maximum DC Blocking Voltage VDC 200 V
Maximum Average Forward Current 8.0 (Per Leg )
Total Device,(Rated VR), Tc = 150°C 16 (Total Device)
Maximum Peak Rectified Forward Current
(Rated VR, Square Wave, 20 kHz) Tc = 150°C
Maximum Non-repetitive Peak Forward Surge Current
(Halfwave, single phase, 60 Hz) Per Leg
Maximum Forward Voltage at IF = 8 A, Tc = 25°C VF0.975(1) V
Maximum Instantaneous Reverse Current (1) IR5 (Tc = 25°C) µA
( Rated dc Voltage) IR(H) 250 (Tc = 150°C) µA
Maximum Reverse Recovery Time
(IF = 0.5A, IR = 1A ; Irr = 0.25 A)
Maximum Thermal Resistance, Junction to Case RθJC 3.0 °C/W
Junction Temperature Range TJ - 65 to + 175 °C
Storage Temperature Range TSTG - 65 to + 175 °C
Note :
(
1
)
Pulse Test
:
Pulse Width
=
300
µ
s, Duty Cycle
≤
2
.
0
%
Page 1 of 2 Rev. 02 : March 31, 2005
100
A
A
Trr 25 ns
IFSM
RATING
A
IF(AV)
IFRM 16
0.105(2.67)
0.095(2.41)
PIN 2
0.205(520)
0.195(4.95)
0.635(16.13)
0.625(15.87)
0.055(1.39)
0.045(1.14)
0.145(3.68)
0.135(3.43)
0.160(4.06)
0.140(3.56)
0.603(15.32)
0.573(14.55)
0.560(14.22)
0.530(13.46)
0.350(8.89)
0.330(8.39)
0.185(4.70)
0.175(4.44)
0.037(0.94)
0.027(0.68)
0.415(10.54)MAX.
0.154(3.91)DIA.
0.148(3.74)
0.113(2.87)
0.103(2.62)
PIN 1
PIN 3 CASE
0.022(0.56)
0.014(0.36)
1 32
TO-220AB
Dimensions in inches and ( millimeters )
RATING AND CHARACTERISTIC CURVES ( MUR1620CT )
FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
+
NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF.
2. Rise time = 10 ns max., Source Impedance = 50 ohms.
3. All Resistors = Non-inductive Types.
FIG. 2 - CURRENT DERATING CASE, PER LEG FIG. 3 - POWER DISSPATION, PER LEG
140 145 150 155 160 165 170 175 0 1 2 3 4 5 6 7 8 9
CASE TEMPERATURE, ( °C) AVERAGE FORWARD CURRENT (AMPS)
FIG. 4 - TYPICAL FORWARD VOLTAGE, PER LEG FIG. 5 - TYPICAL REVERSE CURRENT, PER LEG
Page 2 of 2 Rev. 02 : March 31, 2005
8
6
4
2
12
10
8
0
10
0
6
4
2
100
80
10
0.01
0.1
100 140
020 40 60 120
REVERSE VOLTAGE, VOLTS
AVERAGE POWER DISSIPATION (WATTS)
AVERAGE FORWARD OUTPUT
CURRENT, AMPERES
FORWARD CURRENT, AMPERES
REVERSE CURRENT, MICROAMPERES
TJ = 25 °C
1.0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
FORWARD VOLTAGE, VOLTS
0.1
SET TIME BASE FOR 15/25 ns/cm
Trr
+ 0.5
0
- 0.25
- 1.0 A
1
50 Vdc
(approx)
OSCILLOSCOPE
( NOTE 1 )
1 Ω
50 Ω10 Ω
D.U.T. PULSE
GENERATOR
( NOTE 2 )
Rated VR Applied
dc
Square Wave
TJ = 25 °C
1
100
TJ = 100 °C
TJ = 175 °C
10
dc
Square Wave
TJ = 175 °C