DILM25-10(RDC24) - EATON MOELLER

Type: DILM25−10(RDC24)

Article No.: 277146

Ordering information

Rated operational current AC−3 400 V IeA 25

Max. rating for three−phase motors, 50 – 60 Hz AC−3

230 V PkW 7.5

Max. rating for three−phase motors, 50 – 60 Hz AC−3

400 V PkW 11

Max. rating for three−phase motors, 50 – 60 Hz AC−3

690 V PkW 14

Max. rating for three−phase motors, 50 – 60 Hz AC−4

230 V PkW 3.5

Max. rating for three−phase motors, 50 – 60 Hz AC−4

400 V PkW 6

Max. rating for three−phase motors, 50 – 60 Hz AC−4

690 V PkW 8.5

Conventional thermal current I th = I e AC−1 Open Ith = IeA 40

For use with DILM32−XHI..

DILA−XHI(V)..

General

Standards IEC/EN 60947, VDE 0660, UL, CSA

Lifespan, mechanical

AC operated Operations × 10610

DC operated Operations × 10610

Operating frequency, mechanical

AC operated Operations/h 5000

DC operated Operations/h 5000

Climatic proofing Damp heat, constant, to IEC 60068−2−78

Damp heat, cyclical, to IEC 60068−2−30

Ambient temperature

Open °C −25/60

Enclosed °C −25/40

Storage °C −40/80

Mechanical shock resistance (IEC/EN 60068−2−27)

Half−sinusoidal shock, 20 ms

Main contacts

Make contact g 10

Auxiliary contacts

Make contact g 7

Break contact g 5

Protection type IP00

Protection against direct contact when actuated from

front (IEC 536) Finger− and back−of−hand proof

Weight

AC operated kg 0,42

DC operated kg 0,48

Terminal capacity Main cable

Solid mm21 × (0.75 – 16)

2 × (0.75 – 10)

Flexible with ferrule mm21 × (0.75 – 16)

2 × (0.75 – 10)

Stranded mm21 × 16

Solid or stranded AWG 18 – 6

Anschlussschraube Hauptleiter M5

Tightening torque Nm 3

Terminal capacity Control circuit cables

Solid mm21 × (0.75 – 4)

1 × (0.75 – 4)

Flexible with ferrule mm2 1 × (0.75 – 2.5)

2 × (0.75 – 2.5)

Solid or stranded AWG 18 – 14

Anschlussschraube Hilfsleiter M3.5

Tightening torque Nm 1.2

Tool

Main cable

Pozidriv screwdriver Size 2

Standard screwdriver mm 0.8 × 5.5

1 × 6

Control circuit cables

Pozidriv screwdriver Size 2

Standard screwdriver mm 0.8 × 5.5

1 × 6

Terminal capacity Control circuit cables

Solid mm20.75 – 2.5

Flexible mm20.75 – 2.5

Flexible with ferrule mm20.75 – 2.5

Solid or stranded AWG 18 – 14

Tool

Stripping length mm 10

Screwdriver blade width mm 3,5

Main conducting paths

Rated impulse withstand voltage Uimp V AC 8000

Overvoltage category/pollution degree III/3

Rated insulation voltage

AC UiV AC 690

Rated operational voltage UeV AC 690

Safe isolation to VDE 0106 Part 101 and Part 101/A1

between coil and contacts V AC 440

between the contacts V AC 440

Making capacity (cos Õ to IEC/EN 60947) up to 690

VA 350

Breaking capacity

220/230 V A 250

380/400 V A 250

500 V A 250

660/690 V A 150

Component lifespan

AC−3/AC−4  Tripping characteristics

Maximum operating frequency

AC−1; 400 V IeOps/h 800

AC−3; 400 V IeOps/h 800

AC−4; 400 V IeOps/h 300

Short−circuit rating

Short−circuit protection Maximum fuse

Type “2” coordination

400 V gG/gL 500 V A 35

690 V gG/gL 690 V A 35

Type “1” coordination

400 V gG/gL 500 V A 100

690 V gG/gL 690 V A 50

AC−1 duty

conv. therm. current 3−pole 50 – 60 Hz

open

at 40 °C Ith A 45

at 50 °C Ith A 43

at 55 °C Ith A 42

at 60 °C Ith A 40

Enclosed Ith A 36

Conventional free air thermal current, 1−pole

open Ith A 85

Enclosed Ith A 80

AC−3 duty

Rated operational current AC−3 open, 50 – 60 Hz,

3−pole

220/230 V IeA 25

240 V IeA 25

380/400 V IeA 25

415 V IeA 25

440V IeA 25

500 V IeA 25

660/690 V IeA 15

Motor rating

220/230 V PkW 7,5

240V PkW 11

380/400 V PkW 11

415 V PkW 19

440 V PkW 14

500 V PkW 23

660/690 V PkW 14

AC−4 duty

Rated operational current AC−4 open, 50 – 60 Hz,

3−pole

220/230 V IeA 13

240 V IeA 13

380/400 V IeA 13

415 V IeA 13

440 V IeA 13

500 V IeA 13

660/690 V IeA 10

Motor rating

220/230 V PkW 3,5

240 V PkW 4

380/400 V PkW 6

415 V PkW 6,5

440 V PkW 7

500 V PkW 8

660/690 V PkW 8,5

of three−phase capacitors open

DC−1 operation

60 V IeA 40

110 V IeA 40

220 V IeA 40

440 V IeA 2,9

DC−3 operation

60 V IeA 35

110 V IeA 35

220 V IeA 10

440 V IeA 0,6

DC−5 operation

60 V IeA 35

110 V IeA 35

220 V IeA 10

440 V IeA 0,6

Current heat loss (3−pole)

Current heat loss at Ith W 9,6

Current heat loss at Ie to AC−3/400 V W 3,8

Impedance per pole m& 2

Magnet systems

Voltage tolerance

AC operated

AC operated Pick−up × Uc0,8 – 1,1

Drop−out voltage AC operated

Drop−out voltage AC operated Abfall × Uc0,3 – 0,6

DC operated

DC operated Pick−up × Uc0,7 – 1,2

DC operated

DC operated Abfall × Uc0,15–0,6

Power consumption of the coil in a cold state and 1.0

× Uc

50 Hz Pick−up VA 50

50 Hz Pick−up W 40

50 Hz Sealing VA 8

50 Hz Sealing W 2,4

60 Hz Pick−up VA 62

60 Hz Pick−up W 50

60 Hz Sealing 9,1

60 Hz Sealing VA 2,7

50/60 Hz Pick−up VA 60

50/60 Hz Pick−up W 48

50/60 Hz Sealing VA 9,5

7,9

50/60 Hz Sealing W 2,8

2,4

DC operated Pick−up W 12 at 24 V

DC operated Sealing W 0.5 at 24 V

Duty factor % DF 100

Switching times at 100 % Uc (approximate values)

Main contacts

AC operated

Closing delay ms 25

Opening delay ms 25

DC operated

Closing delay ms 60

Opening delay ms 15

Arcing time ms 10

Electromagnetic compatibility (EMC)

Emitted interference to EN 60947−1

Interference immunity to EN 60947−1

Mounting position, AC− and DC operated

Moeller GmbH, Hein−Moeller−Str. 7−11, D−53115 Bonn

E−Mail: catalog@moeller.net, Internet: www.moeller.net, http://catalog.moeller.net