FEATURES
●- Surge overload rating -50 amperes peak
- Ideal for printed circuit board
- Reliable low cost construction utilizong molded plastic
technique results in expensive product
- Mounting position :Any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave ,60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
CHARACTERISTICS SYMBOL RS201 RS202 RS203 RS204 RS205 RS206 RS207 UNIT
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
0.375″(9.5mm) Lead Lengths @TA=40 ℃
Peak Forward Surge Current ,
8.3ms Single Half Sine-Wave
Super Imposed on Rated Load (JEDEC Method)
I2t Rating for Fusing (t<8.3ms) I2t A2s
Maximum Forward Voltage Drop
Per Element at 2.0A Peak
Maximum DC Reverse Current at Rated TJ=25℃μA
DC Blocking Voltage TJ=100℃mA
Typical Junction Capacitance Per Element (Note1) CJpF
Operating Temperature Range TJ℃
Storage Temperature Range TSTG ℃
Note:1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
10.0
1.0
1.1 VVF
IR
30
REVERSE VOLTAGE - 50 to 1000Volts
FORWARD CURRENT - 2.0 Amperes
Dimensions in inches and (millimeters)
A
-55 to +150
2.0
-55 to +125
15.0
50 A
I(AV)
IFSM
RS-2
.571(14.5)
.610(15.5)
.709(19.0)
.669(17.0)
.551(14.0)
.512(13.0)
.276(7.0)
.236(6.0)
.148(3.75)
.108(2.75)
.028(0.7)TYP.
.035(0.9)DIA
(19.0)
.750 MIN.
.160(4.1)
.140(3.6)
.078(2.0)*45
°
Surface Mount Silicon Bridge Rectifiers
RS201-G thru RS207
-G
"-G" : RoHS Device
MDS0905006A Page 1