7
Relays &
Optocouplers
Low Voltage Products & Systems 7.77
ABB Inc. • 888-385-1221 • www.abb.us/lowvoltage 1SXU000023C0202
Interface relays & optocouplers
Type R600
R600
Interface Relays & optocouplers
Easy marking
• Box function with markers type RC610
• Wire connection with markers type RC65
• Electrical schematic of the block on the side of the block
Jumper bar
Same jumper bar for “Screw clamp” or “Spring clamp”
technologies. Independent of wire clamp and snap on held
in place. Use of end sections is required to preserve IP20
protection.
Functioning status
Functioning display through a green LED.
Easy wiring
Diameter 3.5mm screwdriver, self-gripped into spring.
Manual or automatic functioning
Micro-Switch allowing forcing of the coil input to 0 or 1 for
interventions in the equipment.
Two possibilities:
• With a visible switch located on the front side
• With a secure switch after accessing hatch opening
Distribution block
“Screw clamp” or “Spring clamp” technologies. With protection
connected to the rail.
For polarity distribution on demand: coils and/or contacts.
Dimensions
Compact block in “Spring clamp” or “Screw clamp” versions
with 6mm and 12mm spacings.
No disturbance production
Choice of high quality electronic components to reduce leakage
currents (<50µA).
The plus in our performances
• Triac output 400 VAC (50 Hz / 60 Hz)
• Relay output 12 A in 12 mm spacing
• 100 part numbers
• Screw clamp or spring clamp connections
Additional features
• Contact life increased
• Full solution from sensor to motor
• Only one part number for AC/DC devices
• IP 20 protection
• Separation and identication of several voltages
• Adaptability to any application type
7
Relays &
Optocouplers
7.78 Low Voltage Products & Systems
1SXU000023C0202 ABB Inc. • 888-385-1221 • www.abb.us/lowvoltage
RB 111 A-24VAC/DC 10 0,02
RB 111 A-
48-60VAC/DC
10 0,02
RB 111 A-
115VAC/DC
10 0,02
RB 111 A-
230VAC/DC
10 0,02
RB 111 AI-
24VAC/DC 10 0,02
RB 111 AR-
24VAC/DC 5 0,03
RB 101 AR-24VAC/DC 5 0,03
RBR 111 A-24VAC/DC 10 0,02
RBR 111 A-
48-60VAC/DC
10 0,02
RBR 111 A-
115VAC/DC
10 0,02
RBR 111 A-
230VAC/DC
10 0,02
RBR 111 AI-
24VAC/DC 10 0,02
RBR 111 AR-
24VAC/DC 5 0,03
RBR 101 AR-24VAC/DC 5 0,03
RB...111 A - 24 V AC/DC
RB...111 A48-60-115-230 V AC/DC
RB...111 AR
RB...101 AR
24 VAC/DC 48 VAC/DC 60 VAC/DC 115 VAC/DC 230 VAC/DC 24 VAC/DC 24 VAC/DC 24 VAC/DC
50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz
0,24 W 0,34 W 0,54 W 0,46 W 0,8 W 0,24 W 0,24 W 0,24 W
10 mA 7 mA 9 mA 4 mA 3,5 mA 10 mA 10 mA 10 mA
4,5 V 8 V 8 V 17 V 27 V 4,5 V 4,5 V 4,5 V
12 V / 250 V AC
10 mA / 6 A
0,6 W / 140 W
107
5 ms 5 ms 5 ms 6 ms 7 ms 5 ms 5 ms 5 ms
8 ms 8 ms 8 ms 15 ms 15 ms 8 ms 8 ms 8 ms
1,2 ms 1,2 ms 1,2 ms
UL 94 V0 UL 94 V0
0,2 - 4 mm² / 24 - 12 AWG 0,2 - 2,5 mm² / 24 - 12 AWG
0,22 - 2,5 mm² / 24 - 12 AWG 0,22 - 2,5 mm² / 24 - 12 AWG
2,5 mm² / 12 AWG 2,5 mm² / 12 AWG
9 mm .354" 9 mm .354"
3,5 mm .137" 3,5 mm .137"
IP20 NEMA1 IP20 NEMA1
0,4 - 0,6 Nm 3.5 - 5.3 Ib.in 0,4 - 0,6 Nm 3.5 - 5.3 Ib.in
RB...111 AI
DC12 AC12 DC13 AC15
24 V 6 A 6 A 1 A 3 A
110/120 V 0,3 A 6 A 0,2 A 3 A
220/230 V 0,2 A 6 A 0,1 A 3 A
BADH V0 50
BADL V0 50
BAM2 V0 50
SC 612 10
BJ 612-10 10
BJ 612-70 10
D4/12-3A-3A 5
D4/12-3L-3L 5
FC2 10
RC65 RC610
SC612
BADL BJ...
FC2
D 4/12-3...
BADH
RB 111 A RB 111 AI RB 111 AR RB 101 AR
center of rail
Characteristics
Ordering data
Relay characteristics
COIL
Rated voltage +20%, -15%
on DC ; +10%, -10% on AC
Frequency
Power
Rated current
Drop-out voltage at 20°C
Status device
CONTACT
Type
Voltage switching range min./max.
Current switching range min./max.
Load switching range
AC1 min. / max.
DC1 min. / max.
Number of on-load operations
Number of off-load operations
Operating speed F
O
Bounce
Insulation coil / contact
Resistance to shock coil / contact
Insulation contact / contact
Ambient temperature
storage
operating
Other characteristics
Body material grey
Wire Solid wire
size Stranded wire
Rated wire size
Wire stripping length
Recommended screwdriver
Protection
Recommended torque
Approvals
Reference standards
±10% on AC
+10% -15% on DC
green LED green LED green LED
1 NO 1 NO + RC 1 NC + RC
0,6 VA / 1500 VA (ohmic load)
105 on AC15
4000 V RMS
3800 V RMS
4000 V RMS
4000 V RMS
1000 V RMS
-40°C to +80°C
-20°C to +70°C (1)
Screw clamp Spring clamp
,
CEI 947-7-1 / CEI 947-1 / CEI 1131-2 (in relevant parts) / CEI 60664-1 / CEM : IRC 1000-4-2, 3, 4, 5, 6.
Limited load in CC
Current (Acc)
Voltage (Vcc)
Screw clamp module
center of rail
Spring clamp module
End section
Separator end section
Divisible shunt 10 poles
Divisible shunt 70 poles
Screw clamp distribution block sp. 12 mm
Spring clamp distribution block sp. 12 mm
Test plug DIA. 2 mm
Marking method see marking
Accessories
(1) Over 55°C, blocks have to be mounted on horizontal rail with 10 mm spacing between each block. For vertical
rail mounting use temperature is 15°C less decreased.
1SNA 645 014 R2700
1SNA 645 015 R2000
1SNA 645 016 R2100
1SNA 645 017 R2200
1SNA 645 063 R0000
1SNA 645 018 R0300
1SNA 645 019 R0400
1SNA 645 514 R2100
1SNA 645 515 R2200
1SNA 645 516 R2300
1SNA 645 517 R2400
1SNA 645 563 R0200
1SNA 645 518 R0500
1SNA 645 519 R0600
1SNA 116 900 R2700
1SNA 399 903 R0200
1SNA 399 967 R0100
1SNA 290 474 R0200
1SNA 290 488 R0100
1SNA 290 489 R0200
1SNA 645 031 R2000
1SNA 645 531 R2200
1SNA 007 865 R2600
Interface relays and optocouplers
R600
1NO or 1NC high level contact 10 mA to 6 A - 6 mm .236” or 12 mm .472” spacing
Description Type Order code
Packaging
Weight
kg
Relay, 1 NO high level 6 mm spacing
Relay, 1 NO high level 6 mm spacing
Relay, 1 NO high level 6 mm spacing
Relay, 1 NO high level 6 mm spacing
Relay, 1 NO high level w/safety switch 6 mm sp.
Relay, 1 NO high level w/contact protection 12 mm sp.
Relay, 1 NC high level w/contact protection 12 mm sp.
Relay, 1 NO high level 6 mm spacing
Relay, 1 NO high level 6 mm spacing
Relay, 1 NO high level 6 mm spacing
Relay, 1 NO high level 6 mm spacing
Relay, 1 NO high level w/safety switch 6 mm sp.
Relay, 1 NO high level w/contact protection 12 mm sp.
Relay, 1 NC high level w/contact protection 12 mm sp.
7
Relays &
Optocouplers
Low Voltage Products & Systems 7.79
ABB Inc. • 888-385-1221 • www.abb.us/lowvoltage 1SXU000023C0202
RB 121-5VDC 10 0,02
RB 121-12VDC 10 0,02
RB 121-24VDC 10 0,02
RB 121 A-
24VAC/DC
10 0,02
RB 121 A-
48-60VAC/DC
10 0,02
RB 121 A-
115VAC/DC
10 0,02
RB 121 A-
230VAC/DC
10 0,02
RBR 121-5VDC 10 0,02
RBR 121-12VDC 10 0,02
RBR 121-24VDC 10 0,02
RBR 121 A-
24VAC/DC
10 0,02
RBR 121 A-
48-60VAC/DC
10 0,02
RBR 121 A-
115VAC/DC
10 0,02
RBR 121 A-
230VAC/DC
10 0,02
BADH V0 50
BADL V0 50
BAM2 V0 50
SC 612 10
BJ 612-10 10
BJ 612-70 10
D4/12-3-3 5
D4/12-3R-3R 5
FC2 10
RC65 RC610
RB...121 - 5-12 V DC
RB...121 A - 24 V AC/DC
RB 121 RB 121A
RB...121 A
48-60-115-230 V AC/DC
5 V DC 12 V DC 24 V DC 24 VAC/DC 48 V AC/DC 60 V AC/DC 115 V AC/DC 230 V AC/DC
50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz
0,2 W 0,2 W 0,28 W 0,24 W 0,33 W 0,54 W 0,46 W 0,8 W
40 mA 16 mA 12 mA 10 mA 7 mA 9 mA 4 mA 3,5 mA
1,2 V 2,2 V 1,2 V 4,5 V 8 V 8 V 17 V 27 V
12 V / 250 V AC
10 mA / 6 A
0,6 W / 140 W
107
5 ms 5 ms 5 ms 5 ms 5 ms 5 ms 6 ms 7 ms
8 ms 8 ms 8 ms 8 ms 8 ms 8 ms 15 ms 16 ms
1,2 ms
UL 94 V0 UL 94 V0
0,2 - 4 mm² / 24 - 12 AWG 0,2 - 2,5 mm² / 24 - 12 AWG
0,22 - 2,5 mm² / 24 - 12 AWG 0,22 - 2,5 mm² / 24 - 12 AWG
2,5 mm² / 12 AWG 2,5 mm² / 12 AWG
9 mm .354" 9 mm .354"
3,5 mm .137" 3,5 mm .137"
IP20 NEMA1 IP20 NEMA1
0,4 - 0,6 Nm 3.5 - 5.3 Ib.in 0,4 - 0,6 Nm 3.5 - 5.3 Ib.in
DC12 AC12 DC13 AC15
24 V 6 A 6 A 1 A 3 A
110/120 V 0,3 A 6 A 0,2 A 3 A
220/230 V 0,2 A 6 A 0,1 A 3 A
RB...121 - 24 V DC
Characteristics
Ordering data
Relay characteristics
COIL
Rated voltage +20%, -15%
on DC ; +10%, -10% on AC
Frequency
Power
Rated current
Drop-out voltage at 20°C
Status device
CONTACT
Type
Voltage switching range min./max.
Current switching range min./max.
Load switching range
AC1 min. / max.
DC1 min. / max.
Number of on-load operations
Number of off-load operations
Operating speed F
O
Bounce
Insulation coil / contact
Resistance to shock coil / contact
Insulation contact / contact
Ambient temperature
storage
operating
Other characteristics
Body material grey
Wire Solid wire
size Stranded wire
Rated wire size
Wire stripping length
Recommended screwdriver
Protection
Recommended torque
Approvals
Reference standards
±10% on AC
+10% -15% on DC
green LED
1 SPDT
0,6 VA / 1500 VA (ohmic load)
105 on AC15
4000 V RMS
4000 V RMS
1000 V RMS
-40°C to +80°C
-20°C to +70°C (1)
Screw clamp Spring clamp
,
CEI 947-7-1 / CEI 947-1 / CEI 1131-2 (in relevant parts) / CEI 60664-1 / CEM : IRC 1000-4-2, 3, 4, 5, 6.
End section
Separator end section
Divisible shunt 10 poles
Divisible shunt 70 poles
Screw clamp distribution block sp. 12 mm
Spring clamp distribution block sp. 12 mm
Test plug DIA. 2 mm
Marking method see marking
Accessories
Limited load in CC
Current (Acc)
Voltage (Vcc)
center of rail
Screw clamp module
center of rail
Spring clamp module
(1) Over 55°C, blocks have to be mounted on horizontal rail with 10 mm spacing between each block. For vertical
rail mounting use temperature is 15°C less decreased.
1SNA 645 034 R2300
1SNA 645 035 R2400
1SNA 645 064 R0100
1SNA 645 001 R0300
1SNA 645 002 R0400
1SNA 645 003 R0500
1SNA 645 004 R0400
1SNA 645 534 R2500
1SNA 645 535 R2600
1SNA 645 564 R0300
1SNA 645 501 R0500
1SNA 645 502 R0600
1SNA 645 503 R0700
1SNA 645 504 R0000
1SNA 116 900 R2700
1SNA 399 903 R0200
1SNA 399 967 R0100
1SNA 290 474 R0200
1SNA 290 488 R0100
1SNA 290 489 R0200
1SNA 645 031 R2000
1SNA 645 531 R2200
1SNA 007 865 R2600
SC612
BADL BJ...
FC2
D 4/12-3...
BADH
Description Type Order code
Packaging
Weight
kg
Relay, 1 SPDT high level
Relay, 1 SPDT high level
Relay, 1 SPDT high level
Relay, 1 SPDT high level
Relay, 1 SPDT high level
Relay, 1 SPDT high level
Relay, 1 SPDT high level
Relay, 1 SPDT high level
Relay, 1 SPDT high level
Relay, 1 SPDT high level
Relay, 1 SPDT high level
Relay, 1 SPDT high level
Relay, 1 SPDT high level
Relay, 1 SPDT high level
Interface relays and optocouplers
R600
1 SPDT high level contact 10 mA to 6 A - 6 mm .236” spacing
7
Relays &
Optocouplers
7.80 Low Voltage Products & Systems
1SXU000023C0202 ABB Inc. • 888-385-1221 • www.abb.us/lowvoltage
RB 121-5VDC 10 0,02
RB 121-12VDC 10 0,02
RB 121-24VDC 10 0,02
RB 121 A-24VAC/DC 10 0,02
RB 121 A-48-60VAC/DC 10 0,02
RB 121 A-115VAC/DC 10 0,02
RB 121 A-230VAC/DC
10 0,02
RBR 121-5VDC 10 0,02
RBR 121-12VDC 10 0,02
RBR 121-24VDC 10 0,02
RBR 121 A-24VAC/DC
10 0,02
RBR 121 A-48-60VAC/DC 10 0,02
RBR 121 A-115VAC/DC 10 0,02
RBR 121 A-230VAC/DC
10 0,02
RB...121 - 5-12 V DC
RB...121 A - 24 V AC/DC
RB 121 RB 121 A
RB...121 A
48-60-115-230 V AC/DC
5 V DC 12 V DC 24 V DC 24 VAC/DC 48 V AC/DC 60 V AC/DC
115 V AC/DC
230 V AC/DC
50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz
0,2 W 0,2 W 0,28 W 0,24 W 0,33 W 0,54 W 0,46 W 0,8 W
40 mA 16 mA 12 mA 10 mA 7 mA 9 mA 4 mA 3,5 mA
1,2 V 2,2 V 1,2 V 4,5 V 8 V 8 V 17 V 27 V
5 V / 250 V AC
1 mA / 6 A
0,05 W / 140 W
107
5 ms 5 ms 5 ms 5 ms 5 ms 5 ms 6 ms 7 ms
8 ms 8 ms 8 ms 8 ms 8 ms 8 ms 15 ms 16 ms
1,2 ms
UL 94 V0 UL 94 V0
0,2 - 4 mm² / 24 - 12 AWG 0,2 - 2,5 mm² / 24 - 12 AWG
0,22 - 2,5 mm² / 24 - 12 AWG 0,22 - 2,5 mm² / 24 - 12 AWG
2,5 mm² / 12 AWG 2,5 mm² / 12 AWG
9 mm .354" 9 mm .354"
3,5 mm .137" 3,5 mm .137"
IP20 NEMA1 IP20 NEMA1
0,4 - 0,6 Nm 3.5 - 5.3 Ib.in 0,4 - 0,6 Nm 3.5 - 5.3 Ib.in
DC12 AC12 DC13 AC15
24 V 6 A 6 A 1 A 3 A
110/120 V 0,3 A 6 A 0,2 A 3 A
220/230 V 0,2 A 6 A 0,1 A 3 A
BADH V0 50
BADL V0 50
BAM2 V0 50
SC 612 10
BJ 612-10 10
BJ 612-70 10
D4/12-3-3 5
D4/12-3R-3R 5
FC2 10
RC65 RC610
RB...121 - 24 V DC
Characteristics
Description Type Order code
Packaging
Weight
kg
Relay, 1 SPDT low level
Relay, 1 SPDT low level
Relay, 1 SPDT low level
Relay, 1 SPDT low level
Relay, 1 SPDT low level
Relay, 1 SPDT low level
Relay, 1 SPDT low level
Relay, 1 SPDT low level
Relay, 1 SPDT low level
Relay, 1 SPDT low level
Relay, 1 SPDT low level
Relay, 1 SPDT low level
Relay, 1 SPDT low level
Relay, 1 SPDT low level
Ordering data
Relay characteristics
COIL
Rated voltage +20%, -15%
on DC ; +10%, -10% on AC
Frequency
Power
Rated current
Drop-out voltage at 20°C
Status device
CONTACT
Type
Voltage switching range min./max.
Current switching range min./max.
Load switching range
AC1 min. / max.
DC1 min. / max.
Number of on-load operations
Number of off-load operations
Operating speed F
O
Bounce
Insulation coil / contact
Resistance to shock coil / contact
Insulation contact / contact
Ambient temperature
storage
operating
Other characteristics
Body material grey
Wire Solid wire
size Stranded wire
Rated wire size
Wire stripping length
Recommended screwdriver
Protection
Recommended torque
Approvals
Reference standards
±10% on AC
+10% -15% on DC
green LED
1 SPDT
0,05 VA / 1500 VA (ohmic load)
105 on AC15
4000 V RMS
4000 V RMS
1000 V RMS
-40°C to +80°C
-20°C to +70°C (1)
Screw clamp Spring clamp
,
CEI 947-7-1 / CEI 947-1 / CEI 1131-2 (in relevant parts) / CEI 60664-1 / CEM : IRC 1000-4-2, 3, 4, 5, 6.
Limited load in CC
Current (Acc)
Voltage (Vcc)
center of rail
Screw clamp module
center of rail
Spring clamp module
End section
Separator end section
Divisible shunt 10 poles
Divisible shunt 70 poles
Screw clamp distribution block sp. 12 mm
Spring clamp distribution block sp. 12 mm
Test plug DIA. 2 mm
Marking method see marking
Accessories
(1) Over 55°C, blocks have to be mounted on horizontal rail with 10 mm spacing between each block. For vertical
rail mounting use temperature is 15°C less decreased.
1SNA 645 036 R2500
1SNA 645 037 R2600
1SNA 645 065 R0200
1SNA 645 005 R0700
1SNA 645 006 R0000
1SNA 645 007 R0100
1SNA 645 008 R1200
1SNA 645 536 R2700
1SNA 645 537 R2000
1SNA 645 565 R0400
1SNA 645 505 R0100
1SNA 645 506 R0200
1SNA 645 507 R0300
1SNA 645 508 R1400
1SNA 116 900 R2700
1SNA 399 903 R0200
1SNA 399 967 R0100
1SNA 290 474 R0200
1SNA 290 488 R0100
1SNA 290 489 R0200
1SNA 645 031 R2000
1SNA 645 531 R2200
1SNA 007 865 R2600
SC612
BADL BJ...
FC2
D 4/12-3...
BADH
Interface relays and optocouplers
R600
1 SPDT low level contact 1 mA upto 6 A - 6 mm .236” spacing
7
Relays &
Optocouplers
Low Voltage Products & Systems 7.81
ABB Inc. • 888-385-1221 • www.abb.us/lowvoltage 1SXU000023C0202
RB 121 AR-
115VAC/DC
5 0,03
RB 121 AR-
230VAC/DC
5 0,03
RB 121 AI-
24VAC/DC
5 0,03
RB 121 AI-
24VAC/DC
5 0,03
RB 121 AI-
24VAC/DC
5 0,03
RB 121 AI-
24VAC/DC
5 0,03
RBR 121 AR-
115VAC/DC
5 0,03
RBR 121 AR-
230VAC/DC
5 0,03
RBR 121 AI-
24VAC/DC
5 0,03
RBR 121 AI-
24VAC/DC
5 0,03
RBR 121 AI-
24VAC/DC
5 0,03
RBR 121 AI-
24VAC/DC
5 0,03
RB...121 AR
RB...121 AR RB...121 AI RB...121 AI
RB...121 AI
115 V AC/DC 230 V AC/DC 24 VAC/DC 24 VAC/DC 24 VAC/DC 24 VAC/DC
50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz
2 W 2,8 W 0,24 W 0,24 W 0,24 W 0,24 W
18 mA 12 mA 10 mA 10 mA 10 mA 10 mA
17 V 27 V 4,5 V 4,5 V 4,5 V 4,5 V
1,6 mA 1 mA
12 V / 250 V 5 V / 250 V
10 mA / 6 A 1 mA / 6 A
0,6 W / 140 W 0,05 W / 140 W
107 107
6 ms 7 ms 5 ms 5 ms 5 ms 5 ms
15 ms 16 ms 8 ms 8 ms 8 ms 8 ms
UL 94 V0 UL 94 V0
0,2 - 4 mm² / 24 - 12 AWG 0,2 - 2,5 mm² / 24 - 12 AWG
0,22 - 2,5 mm² / 24 - 12 AWG 0,22 - 2,5 mm² / 24 - 12 AWG
2,5 mm² / 12 AWG 2,5 mm² / 12 AWG
9 mm .354" 9 mm .354"
3,5 mm .137" 3,5 mm .137"
IP20 NEMA1 IP20 NEMA1
0,4 - 0,6 Nm 3.5 - 5.3 Ib.in 0,4 - 0,6 Nm 3.5 - 5.3 Ib.in
DC12 AC12 DC13 AC15
24 V 6 A 6 A 1 A 3 A
110/120 V 0,3 A 6 A 0,2 A 3 A
220/230 V 0,2 A 6 A 0,1 A 3 A
BADH V0 50
BADL V0 50
BAM2 V0 50
SC 612 10
BJ 612-10 10
BJ 612-70 10
D4/12-3A-3A 5
D4/12-3L-3L 5
FC2 10
RC65 RC610
RB...121 AI
Characteristics
Description Type Order code
Packaging
Weight
kg
Relay, 1SPDT high level w/leakage current protec.
Relay, 1SPDT high level w/leakage current protec.
Relay, 1SPDT high level with switch
Relay, 1SPDT high level with safety switch
Relay, 1SPDT low level with switch
Relay, 1SPDT low level with safety switch
Relay, 1SPDT high level w/leakage current protec.
Relay, 1SPDT high level w/leakage current protec.
Relay, 1SPDT high level with switch
Relay, 1SPDT high level with safety switch
Relay, 1SPDT low level with switch
Relay, 1SPDT low level with safety switch
Ordering data
Relay characteristics
COIL
Rated voltage +20%, -15%
on DC ; +10%, -10% on AC
Frequency
Power
Rated current
Drop-out voltage at 20°C
Permissible leakage current
Status device
CONTACT
Type
Voltage switching range min./max.
Current switching range min./max.
Load switching range
AC1 min. / max.
DC1 min. / max.
Number of on-load operations
Number of off-load operations
Operating speed F
O
Bounce
Insulation coil / contact
Resistance to shock coil / contact
Insulation contact / contact
Ambient temperature
storage
operating
Other characteristics
Body material grey
Wire Solid wire
size Stranded wire
Rated wire size
Wire stripping length
Recommended screwdriver
Protection
Recommended torque
Approvals
Reference standards
±10% on AC
+10% -15% on DC
green LED green LED
1 SPDT 1 SPDT
0,6 VA / 1500 VA (ohmic load)
0,05 VA/1500 VA (ohmic load)
105 on AC15 105 on AC15
4000 V RMS
4000 V RMS
1000 V RMS
-40°C to +80°C
-20°C to +70°C (1)
Screw clamp Spring clamp
,
CEI 947-7-1 / CEI 947-1 / CEI 1131-2 (in relevant parts) / CEI 60664-1 / CEM : IRC 1000-4-2, 3, 4, 5, 6.
Limited load in CC
Current (Acc)
Voltage (Vcc)
center of rail
Screw clamp module
center of rail
Spring clamp module
End section
Separator end section
Divisible shunt 10 poles
Divisible shunt 70 poles
Screw clamp distribution block sp. 12 mm
Spring clamp distribution block sp. 12 mm
Test plug DIA. 2 mm
Marking method see marking
Accessories
(1) Over 55°C, blocks have to be mounted on horizontal rail with 10 mm spacing between each block. For vertical
rail mounting use temperature is 15°C less decreased.
1SNA 116 900 R2700
1SNA 399 903 R0200
1SNA 399 967 R0100
1SNA 290 474 R0200
1SNA 290 488 R0100
1SNA 290 489 R0200
1SNA 645 031 R2000
1SNA 645 531 R2200
1SNA 007 865 R2600
1SNA 645 046 R0700
1SNA 645 011 R2400
1SNA 645 032 R2100
1SNA 645 009 R1300
1SNA 645 033 R2200
1SNA 645 010 R0700
1SNA 645 546 R0100
1SNA 645 511 R2600
1SNA 645 532 R2300
1SNA 645 509 R1500
1SNA 645 533 R2400
1SNA 645 510 R0100
SC612
BADL BJ...
FC2
D 4/12-3...
BADH
Interface relays and optocouplers
1 SPDT high level with switch or leakage current protection - 12 mm .472” spacing
1 SPDT low level with switch - 12 mm .472” spacing
7
Relays &
Optocouplers
7.82 Low Voltage Products & Systems
1SXU000023C0202 ABB Inc. • 888-385-1221 • www.abb.us/lowvoltage
RB 122 A-24VAC/DC 5 0,03
RB 122 A-48-60VAC/DC 5 0,03
RB 122 A-115VAC/DC 5 0,03
RB 122 A-230VAC/DC 5 0,03
RBR 122 A-24VAC/DC 5 0,03
RBR 122 A-48-60VAC/DC 5 0,03
RBR 122 A-115VAC/DC 5 0,03
RBR 122 A-230VAC/DC 5 0,03
RB...122 A
24-48-60 V AC/DC
RB...122A
RB...122 A
115-230 V AC/DC
24 VAC/DC 48 V AC/DC 60 V AC/DC
115 V AC/DC 230 V AC/DC
50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz
0,48 W 0,62 W 0,96 W 0,58 W 1,15 W
20 mA 13 mA 16 mA 5 mA 5 mA
5,4 V 8,8 V 8,8 V 20 V 10 V
5 V / 250 V DC - 250 V AC
1 mA / 8 A 1 mA / 5 A
5 mVA / 1500 VA
5 mW / 192 W
2 x 107
6 ms 10 ms 10 ms 6 ms 6 ms
10 ms 14 ms 14 ms 15 ms 15 ms
1 ms
UL 94 V0 UL 94 V0
0,2 - 4 mm² / 24 - 12 AWG 0,2 - 2,5 mm² / 24 - 12 AWG
0,22 - 2,5 mm² / 24 - 12 AWG 0,22 - 2,5 mm² / 24 - 12 AWG
2,5 mm² / 12 AWG 2,5 mm² / 12 AWG
9 mm .354" 9 mm .354"
3,5 mm .137" 3,5 mm .137"
IP20 NEMA1 IP20 NEMA1
0,4 - 0,6 Nm 3.5 - 5.3 Ib.in 0,4 - 0,6 Nm 3.5 - 5.3 Ib.in
BADH V0 50
BADL V0 50
BAM2 V0 50
SC 612 10
BJ 612-10 10
BJ 612-70 10
D4/12-3A-3A 5
D4/12-3L-3L 5
FC2 10
RC65 RC610
Characteristics
Description Type Order code
Packaging
Weight
kg
Relay, 1 DPDT low level
Relay, 1 DPDT low level
Relay, 1 DPDT low level
Relay, 1 DPDT low level
Relay, 1 DPDT low level
Relay, 1 DPDT low level
Relay, 1 DPDT low level
Relay, 1 DPDT low level
Ordering data
Relay characteristics
COIL
Rated voltage +20%, -15%
on DC ; +10%, -10% on AC
Frequency
Power
Rated current
Drop-out voltage at 20°C
Status device
CONTACT
Type
Voltage switching range min./max.
Current switching range min./max.
Load switching range
AC1 min. / max.
DC1 min. / max.
Number of on-load operations
Number of off-load operations
Operating speed F
O
Bounce
Insulation coil / contact
Resistance to shock coil / contact
Insulation contact / contact
Ambient temperature
storage
operating
Other characteristics
Body material grey
Wire Solid wire
size Stranded wire
Rated wire size
Wire stripping length
Recommended screwdriver
Protection
Recommended torque
Approvals
Reference standards
±10% on AC
+10% -15% on DC
green LED
1 DPDT
105
3500 V RMS
3500 V RMS
3500 V RMS (between 2 contacts)
-40°C to +80°C
-20°C to +70°C (1)
Screw clamp Spring clamp
,
CEI 947-7-1 / CEI 947-1 / CEI 1131-2 (in relevant parts) / CEI 60664-1 / CEM : IRC 1000-4-2, 3, 4, 5, 6.
center of rail
Screw clamp module
center of rail
Spring clamp module
End section
Separator end section
Divisible shunt 10 poles
Divisible shunt 70 poles
Screw clamp distribution block sp. 12 mm
Spring clamp distribution block sp. 12 mm
Test plug DIA. 2 mm
Marking method see marking
Accessories
(1) Over 55°C, blocks have to be mounted on horizontal rail with 10 mm spacing between each block. For vertical
rail mounting use temperature is 15°C less decreased.
CURRENT (A)
VOLTAGE (V DC)
Max. DC load breaking capacity
resistive load
1SNA 645 012 R2500
1SNA 645 040 R1500
1SNA 645 041 R0200
1SNA 645 013 R2600
1SNA 645 512 R2700
1SNA 645 540 R1700
1SNA 645 541 R0400
1SNA 645 513 R2000
1SNA 116 900 R2700
1SNA 399 903 R0200
1SNA 399 967 R0100
1SNA 290 474 R0200
1SNA 290 488 R0100
1SNA 290 489 R0200
1SNA 645 031 R2000
1SNA 645 531 R2200
1SNA 007 865 R2600
SC612
BADL BJ...
FC2
D 4/12-3...
BADH
Interface relays and optocouplers
R600
1 DPDT low level contact 1 mA to 8 A - 12 mm .472” spacing
7
Optocouplers
Low Voltage Products & Systems 7.83
ABB Inc. • 888-385-1221 • www.abb.us/lowvoltage 1SXU000023C0202
R600 Optocouplers
R600
Optocouplers
Easy marking
• Box function with markers type RC610
• Wire connection with markers type RC65
• Electrical schematic of the block on the side of the block
Jumper bar
Same jumper bar for “Screw clamp” or “Spring clamp”
technologies. Independent of wire clamp and snap on held
in place. Use of end sections is required to preserve IP20
protection.
Functioning status
Functioning display through a green LED.
Easy wiring
Diameter 3.5mm screwdriver, self-gripped into spring.
Manual or automatic functioning
Micro-Switch allowing forcing of the coil input to 0 or 1 for
interventions in the equipment.
Two possibilities:
• With a visible switch located on the front side
• With a secure switch after accessing hatch opening
Distribution block
“Screw clamp” or “Spring clamp” technologies. With protection
connected to the rail.
For polarity distribution on demand: coils and/or contacts.
Dimensions
Compact block in “Spring clamp” or “Screw clamp” versions
with 6mm and 12mm spacings.
No disturbance production
Choice of high quality electronic components to reduce leakage
currents (<50µA).
The plus in our performances
• Triac output 400 VAC (50 Hz / 60 Hz)
• Relay output 12 A in 12 mm spacing
• 100 part numbers
• Screw clamp or spring clamp connections
Additional features
• Contact life increased
• Full solution from sensor to motor
• Only one part number for AC/DC devices
• IP 20 protection
• Separation and identication of several voltages
• Adaptability to any application type
7
Optocouplers
7.84 Low Voltage Products & Systems
1SXU000023C0202 ABB Inc. • 888-385-1221 • www.abb.us/lowvoltage
Optocouplers
R600
5 to 58 VDC output / 100 mA - 6 mm .236” spacing
OB...IC 0100
5 V DC - 12 V DC 24 V DC 48 V AC/DC 60 V AC/DC 115 V AC/DC 230 V AC/DC
50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz
5 mA 9 mA 4 mA 4 mA 5 mA
4 V 4 V 15 V 25 V 25 V
10 µs / 500 µs
10 µs / 500 µs
5 ms / 20 ms
1000 Hz 1000 Hz 20 Hz
0,9 mA 1 mA 0,9 mA
1 mA
100 mA
< 50 µA
1 V
1,3 V
UL 94 V0 UL 94 V0
0,2 - 4 mm² / 24 - 12 AWG 0,2 - 2,5 mm² / 24 - 12 AWG
0,22 - 2,5 mm² / 24 - 12 AWG 0,22 - 2,5 mm² / 24 - 12 AWG
2,5 mm² / 12 AWG 2,5 mm² / 12 AWG
9 mm .354" 9 mm .354"
3,5 mm .137" 3,5 mm .137"
IP20 NEMA1 IP20 NEMA1
0,4 - 0,6 Nm 3.5 - 5.3 Ib.in 0,4 - 0,6 Nm 3.5 - 5.3 Ib.in
OBIC 0100-5-12VDC 10 0,02
OBIC 0100-24VDC 10 0,02
OBIC 0100-48-60VAC/DC 10 0,02
OBIC 0100-115-230VAC/DC
10 0,02
OBRIC 0100-5-12VDC 10 0,02
OBRIC 0100-24VDC 10 0,02
OBRIC 0100-48-60VAC/DC 10 0,02
OBRIC 0100-115-230VAC/DC
10 0,02
OB...IC 0100 - 5-12 V DC
OB...IC 0100
24 V DC
24-48-60-115-230 V AC/DC
BADH V0 50
BADL V0 50
BAM2 V0 50
SC 612 10
BJ 612-10 10
BJ 612-70 10
D4/12-3A-3A 5
D4/12-3L-3L 5
FC2 10
RC65 RC610
Opto. characteristics
INPUT
Input voltage +20% -15% on
DC, +10% -10% on AC
Frequency
Input current
Pull-in voltage at Is=100%
Switching time C / O
Operating frequency
Permissible leakage current
OUTPUT
Output voltage
Output current min.
Output current max.
Output leakage current at
Umax.
Residual voltage at I max and
U rated typical
max.
Frequency on inductive load
Isolation Input / Output
TEMPERATURE
Ambient temperature storage
operating
Other characteristics
Body material grey
Wire Solid wire
size Stranded wire
Rated wire size
Wire stripping length
Recommended screwdriver
Protection
Recommended torque
Approvals
Reference standards
4,5 to 58 VDC
2500 V RMS
-40°C to +80°C
-20°C to +70°C (1)
Screw clamp Spring clamp
,
CEI 947-7-1 / CEI 947-1 / CEI 1131-2 (in relevant parts) / CEI 60664-1 / CEM : IRC 1000-4-2, 3, 4, 5, 6.
Characteristics
Description Type Order code
Packaging
Weight
kg
Optocoupler, 100 mA/DC
Optocoupler, 100 mA/DC
Optocoupler, 100 mA/DC
Optocoupler, 100 mA/DC
Optocoupler, 100 mA/DC
Optocoupler, 100 mA/DC
Optocoupler, 100 mA/DC
Optocoupler, 100 mA/DC
Ordering data
center of rail
Screw clamp module
center of rail
Spring clamp module
End section
Separator end section
Divisible shunt 10 poles
Divisible shunt 70 poles
Screw clamp distribution block sp. 12 mm
Spring clamp distribution block sp. 12 mm
Test plug DIA. 2 mm
Marking method see marking
Accessories
(1) Over 55°C, blocks have to be mounted on horizontal rail with 10 mm spacing between each block. For vertical
rail mounting use temperature is 15°C less decreased.
1SNA 645 047 R0000
1SNA 645 021 R2600
1SNA 645 049 R1200
1SNA 645 022 R2700
1SNA 645 547 R0200
1SNA 645 521 R2000
1SNA 645 549 R1400
1SNA 645 522 R2100
1SNA 116 900 R2700
1SNA 399 903 R0200
1SNA 399 967 R0100
1SNA 290 474 R0200
1SNA 290 488 R0100
1SNA 290 489 R0200
1SNA 645 031 R2000
1SNA 645 531 R2200
1SNA 007 865 R2600
SC612
BADL BJ...
FC2
D 4/12-3...
BADH
7
Optocouplers
Low Voltage Products & Systems 7.85
ABB Inc. • 888-385-1221 • www.abb.us/lowvoltage 1SXU000023C0202
OB...OC 1000 OB...OC 1500 OB...OC 1000
5 V DC - 12 V DC 24 V DC 24 V AC/DC 48 V AC/DC 60 V AC/DC 115 V AC/DC 230 V AC/DC
50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz
5 mA 9 mA 5,4 mA 6,3 mA 4 mA 5,1 mA 4,2 mA 4 mA
4 V 12 V 15 V 27 V 27 V 50 V 80 V
15 µs / 250 µs 30 µs/400 µs 1 ms/7 ms 5 ms/20 ms 5 ms/20 ms 500 µs/10 ms 1 ms / 15 ms
2000 Hz 1000 Hz 60 Hz 20 Hz 20 Hz 50 Hz 35 Hz
1 mA 0,8 mA 0,9 mA 1 mA 1 mA 0,3 mA 0,3 mA
1 mA
2 A
< 50 µA
0,1 V
0,5 V
UL 94 V0 UL 94 V0
0,2 - 4 mm² / 24 - 12 AWG 0,2 - 2,5 mm² / 24 - 12 AWG
0,22 - 2,5 mm² / 24 - 12 AWG 0,22 - 2,5 mm² / 24 - 12 AWG
2,5 mm² / 12 AWG 2,5 mm² / 12 AWG
9 mm .354" 9 mm .354"
3,5 mm .137" 3,5 mm .137"
IP20 NEMA1 IP20 NEMA1
0,4 - 0,6 Nm 3.5 - 5.3 Ib.in 0,4 - 0,6 Nm 3.5 - 5.3 Ib.in
OBOC 1000-
5-12VDC
10 0,02
OBOC 1000-
24VDC
10 0,02
OBOC 1500-
24VAC/DC
10 0,02
OBOC 1000-
48-60VAC/DC
10 0,02
OBOC 1000-
115VAC/DC
10 0,02
OBOC 1000-
230VAC/DC
10 0,02
OBROC 1000-
5-12VDC
10 0,02
OBROC 1000-
24VDC
10 0,02
OBROC 1500-
24VAC/DC
10 0,02
OBROC 1000-
48-60VAC/DC
10 0,02
OBROC 1000-
115VAC/DC
10 0,02
OBROC 1000-
230VAC/DC
10 0,02
OB...OC 1000 - 5-12-24 V DC
OB...OC 1500 - 24 V AC/DC
OB...OC 1000
48-60-115-230 V AC/DC
BADH V0 50
BADL V0 50
BAM2 V0 50
SC 612 10
BJ 612-10 10
BJ 612-70 10
D4/12-3A-3A 5
D4/12-3L-3L 5
FC2 10
RC65 RC610
4,5 to 58 VDC
2500 V RMS
-40°C to +80°C
-20°C to +70°C (1)
Screw clamp Spring clamp
,
CEI 947-7-1 / CEI 947-1 / CEI 1131-2 (in relevant parts) / CEI 60664-1 / CEM : IRC 1000-4-2, 3, 4, 5, 6.
Characteristics
Description Type Order code
Packaging
Weight
kg
Optocoupler, 2 A/DC
Optocoupler, 2 A/DC
Optocoupler, 2 A/DC
Optocoupler, 2 A/DC
Optocoupler, 2 A/DC
Optocoupler, 2 A/DC
Optocoupler, 2 A/DC
Optocoupler, 2 A/DC
Optocoupler, 2 A/DC
Optocoupler, 2 A/DC
Optocoupler, 2 A/DC
Optocoupler, 2 A/DC
Ordering data
Opto. characteristics
INPUT
Input voltage +20% -15% on
DC, +10% -10% on AC
Frequency
Input current
Pull-in voltage at Is=100%
Switching time C / O
Operating frequency
Permissible leakage current
OUTPUT
Output voltage
Output current min.
Output current max.
Output leakage current at
Umax.
Residual voltage at I max and
U rated typical
max.
Frequency on inductive load
Isolation Input / Output
TEMPERATURE
Ambient temperature storage
operating
Other characteristics
Body material grey
Wire Solid wire
size Stranded wire
Rated wire size
Wire stripping length
Recommended screwdriver
Protection
Recommended torque
Approvals
Reference standards
center of rail
Screw clamp module
center of rail
Spring clamp module
End section
Separator end section
Divisible shunt 10 poles
Divisible shunt 70 poles
Screw clamp distribution block sp. 12 mm
Spring clamp distribution block sp. 12 mm
Test plug DIA. 2 mm
Marking method see marking
Accessories
(1) Over 55°C, blocks have to be mounted on horizontal rail with 10 mm spacing between each block. For vertical
rail mounting use temperature is 15°C less decreased.
1SNA 645 050 R1700
1SNA 645 051 R0400
1SNA 645 025 R2200
1SNA 645 053 R0600
1SNA 645 054 R0700
1SNA 645 026 R2300
1SNA 645 550 R1100
1SNA 645 551 R0600
1SNA 645 525 R2400
1SNA 645 553 R0000
1SNA 645 554 R0100
1SNA 645 526 R2500
1SNA 116 900 R2700
1SNA 399 903 R0200
1SNA 399 967 R0100
1SNA 290 474 R0200
1SNA 290 488 R0100
1SNA 290 489 R0200
1SNA 645 031 R2000
1SNA 645 531 R2200
1SNA 007 865 R2600
SC612
BADL BJ...
FC2
D 4/12-3...
BADH
Optocouplers
R600
5 to 58 VDC output / 2 A - 6 mm .236” spacing
7
Optocouplers
7.86 Low Voltage Products & Systems
1SXU000023C0202 ABB Inc. • 888-385-1221 • www.abb.us/lowvoltage
OB...OC 5000
24 V DC 115 V AC/DC 230 V AC/DC
50 / 60 Hz 50 / 60 Hz
5,4 mA 4,2 mA 4 mA
12 V 50 V 80 V
30 µs/400 µs 500 µs/10 ms 1 ms / 15 ms
1000 Hz 50 Hz 35 Hz
0,8 mA 0,3 mA 0,3 mA
1 mA
5 A
< 50 µA
0,1 V
0,5 V
UL 94 V0 UL 94 V0
0,2 - 4 mm² / 24 - 12 AWG 0,2 - 2,5 mm² / 24 - 12 AWG
0,22 - 2,5 mm² / 24 - 12 AWG 0,22 - 2,5 mm² / 24 - 12 AWG
2,5 mm² / 12 AWG 2,5 mm² / 12 AWG
9 mm .354" 9 mm .354"
3,5 mm .137" 3,5 mm .137"
IP20 NEMA1 IP20 NEMA1
0,4 - 0,6 Nm 3.5 - 5.3 Ib.in 0,4 - 0,6 Nm 3.5 - 5.3 Ib.in
OBOC 5000-
24VDC
10 0,02
OBOC 5000-
115VAC/DC
10 0,02
OBOC 5000-
230VAC/DC
10 0,02
OBROC 5000-
24VDC
10 0,02
OBROC 5000-
115VAC/DC
10 0,02
OBROC 5000-
230VAC/DC
10 0,02
OB...OC 5000 - 5-12-24 V DC
OB...OC 5000
24-48-60-115-230 V AC/DC
BADH V0 50
BADL V0 50
BAM2 V0 50
SC 612 10
BJ 612-10 10
BJ 612-70 10
D4/12-3A-3A 5
D4/12-3L-3L 5
FC2 10
RC65 RC610
4,5 to 58 VDC
2500 V RMS
-40°C to +80°C
-20°C to +70°C (1)
Screw clamp Spring clamp
,
CEI 947-7-1 / CEI 947-1 / CEI 1131-2 (in relevant parts) / CEI 60664-1 / CEM : IRC 1000-4-2, 3, 4, 5, 6.
Characteristics
Description Type Order code
Packaging
Weight
kg
Optocoupler, 5 A/DC
Optocoupler, 5 A/DC
Optocoupler, 5 A/DC
Optocoupler, 5 A/DC
Optocoupler, 5 A/DC
Optocoupler, 5 A/DC
Ordering data
center of rail
Screw clamp module
center of rail
Spring clamp module
Opto. characteristics
INPUT
Input voltage +20% -15% on
DC, +10% -10% on AC
Frequency
Input current
Pull-in voltage at Is=100%
Switching time C / O
Operating frequency
Permissible leakage current
OUTPUT
Output voltage
Output current min.
Output current max.
Output leakage current at
Umax.
Residual voltage at I max and
U rated typical
max.
Frequency on inductive load
Isolation Input / Output
TEMPERATURE
Ambient temperature storage
operating
Other characteristics
Body material grey
Wire Solid wire
size Stranded wire
Rated wire size
Wire stripping length
Recommended screwdriver
Protection
Recommended torque
Approvals
Reference standards
End section
Separator end section
Divisible shunt 10 poles
Divisible shunt 70 poles
Screw clamp distribution block sp. 12 mm
Spring clamp distribution block sp. 12 mm
Test plug DIA. 2 mm
Marking method see marking
Accessories
(1) Over 55°C, blocks have to be mounted on horizontal rail with 10 mm spacing between each block. For vertical
rail mounting use temperature is 15°C less decreased.
1SNA 645 024 R2100
1SNA 645 058 R1300
1SNA 645 059 R1400
1SNA 645 524 R2300
1SNA 645 558 R1500
1SNA 645 559 R1600
1SNA 116 900 R2700
1SNA 399 903 R0200
1SNA 399 967 R0100
1SNA 290 474 R0200
1SNA 290 488 R0100
1SNA 290 489 R0200
1SNA 645 031 R2000
1SNA 645 531 R2200
1SNA 007 865 R2600
SC612
BADL BJ...
FC2
D 4/12-3...
BADH
Optocouplers
R600
5 to 58 V DC output / 5 A - 6 mm .236” spacing
7
Optocouplers
Low Voltage Products & Systems 7.87
ABB Inc. • 888-385-1221 • www.abb.us/lowvoltage 1SXU000023C0202
OB...OA 1000
OB...OA 2000
24 V DC 48 V AC/DC 60 V AC/DC 115 V AC/DC 230 V AC/DC 24 V DC
50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz
3,6 mA 4,3 mA 5,5 mA 4,15 mA 4,6 mA 3,6 mA
14 V 15 V 18 V 60 V 135 V 14 V
150 µs/1ms
3 ms / 30 ms
2,2 ms/18 ms
2,5 ms/25 ms
150 µs/1 ms
500 Hz 20 Hz 25 Hz 20 Hz 500 Hz
1 mA 1 mA 1 mA 1 mA 1 mA
50 / 60 Hz 50 / 60 Hz
25 mA 25 mA
1 A 2 A
< 0,5 mA
1 V
1,6 V
UL 94 V0 UL 94 V0
0,2 - 4 mm² / 24 - 12 AWG 0,2 - 2,5 mm² / 24 - 12 AWG
0,22 - 2,5 mm² / 24 - 12 AWG 0,22 - 2,5 mm² / 24 - 12 AWG
2,5 mm² / 12 AWG 2,5 mm² / 12 AWG
9 mm .354" 9 mm .354"
3,5 mm .137" 3,5 mm .137"
IP20 NEMA1 IP20 NEMA1
0,4 - 0,6 Nm 3.5 - 5.3 Ib.in 0,4 - 0,6 Nm 3.5 - 5.3 Ib.in
OBOA 1000-
24VDC
10 0,03
OBOA 1000-48-60VAC/DC
10 0,03
OBOA 1000-
115VAC/DC
10 0,03
OBOA 1000-
230VAC/DC
10 0,03
OBOA 2000-
24VDC
5 0,03
OBROA 1000-
24VDC
10 0,03
OBROA 1000-48-60VAC/DC
10 0,03
OBROA 1000-
115VAC/DC
10 0,03
OBROA 1000-
230VAC/DC
10 0,03
OBROA 2000-
24VAC/DC
5 0,03
OB...OA 1000 - 24 V DC
OB...OA 1000
48-60-115-230 V AC/DC
OB...OA 2000 - 24 V DC
BADH V0 50
BADL V0 50
BAM2 V0 50
SC 612 10
BJ 612-10 10
BJ 612-70 10
D4/12-3A-3A 5
D4/12-3L-3L 5
FC2 10
RC65 RC610
SC612
BADL
BJ...
FC2
D 4/12-3...
BADH
24 to 400 V AC
10 to 230VAC
2500 V RMS
- 40°C to + 80°C
-20°C to +70°C (1)
Screw clamp Spring clamp
,
CEI 947-7-1 / CEI 947-1 / CEI 1131-2 (in relevant parts) / CEI 60664-1 / CEM : IRC 1000-4-2, 3, 4, 5, 6.
Characteristics
Description Type Order code
Packaging
Weight
kg
Optocoupler, 1 A/AC 6 mm spac.
Optocoupler, 1 A/AC 6 mm spac.
Optocoupler, 1 A/AC 6 mm spac.
Optocoupler, 1 A/AC 6 mm spac.
Optocoupler, 2 A/AC 12 mm spac.
Optocoupler, 1 A/AC 6 mm spac.
Optocoupler, 1 A/AC 6 mm spac.
Optocoupler, 1 A/AC 6 mm spac.
Optocoupler, 1 A/AC 6 mm spac.
Optocoupler, 2 A/AC 12 mm spac.
Ordering data
zero
crossing
zero
crossing
center of rail
Screw clamp module
center of rail
Spring clamp module
Opto. characteristics
INPUT
Input voltage +20% -15% on
DC, +10% -10% on AC
Frequency
Input current
Pull-in voltage at Is=100%
Switching time C / O
Operating frequency
Permissible leakage current
OUTPUT
Output voltage
Frequency
Output current min.
Output current max.
Output leakage current at
Umax.
Residual voltage at I max and
U rated typical
max.
Frequency on inductive load
Isolation Input / Output
TEMPERATURE
Ambient temperature storage
operating
Other characteristics
Body material grey
Wire Solid wire
size Stranded wire
Rated wire size
Wire stripping length
Recommended screwdriver
Protection
Recommended torque
Approvals
Reference standards
End section
Separator end section
Divisible shunt 10 poles
Divisible shunt 70 poles
Screw clamp distribution block sp. 12 mm
Spring clamp distribution block sp. 12 mm
Test plug DIA. 2 mm
Marking method see marking
Accessories
(1) Over 55°C, blocks have to be mounted on horizontal rail with 10 mm spacing between each block. For vertical
rail mounting use temperature is 15°C less decreased.
1SNA 645 027 R2400
1SNA 645 061 R0600
1SNA 645 062 R0700
1SNA 645 028 R0500
1SNA 645 029 R0600
1SNA 645 527 R2600
1SNA 645 561 R0000
1SNA 645 562 R0100
1SNA 645 528 R0700
1SNA 645 529 R0000
1SNA 116 900 R2700
1SNA 399 903 R0200
1SNA 399 967 R0100
1SNA 290 474 R0200
1SNA 290 488 R0100
1SNA 290 489 R0200
1SNA 645 031 R2000
1SNA 645 531 R2200
1SNA 007 865 R2600
Optocouplers
R600
24 to 400 VAC output / 2 A max. - 6 or 12 mm spacing
7
Optocouplers
7.88 Low Voltage Products & Systems
1SXU000023C0202 ABB Inc. • 888-385-1221 • www.abb.us/lowvoltage
Notes