SUNON
SPECIFICATION FOR APPROVAL
CUSTOMER :
DESCRIPTION : AXIAL AC FAN
DIMENSIONS : ø172X51 mm
M O D E L : A2175-HBL
TC.R
APPROVED NO
(AUTHORIZED) :
APPROVED BY :
SPEC. NO. A170028
ISSUE DATE 06.22.2001
EDITION 0
REVISE DATE
DAWN
.
Chiahui 6/22 CHKD
.
Kiddy APPD. Winner
E.SPEC EA17006
建準電機工業股份有限公司
建準電機工業股份有限公司建準電機工業股份有限公司
建準電機工業股份有限公司
SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD.
12FL., 120 CHUNG CHENG 1ST RD., TEL:886-7-7163069(41 LINES)
KAOHSIUNG, TAIWAN, R. O. C. FAX:886-7-7163086~89
FAN THICKNESS
3 : 38mm
5 : 51mm
Capacitor
SUNON
MODEL NUMBERING SYSTEM
FAN SERIES
A : AC FAN
VOLTAGE
1 : 115VAC
2 : 220~240VAC
FRAME SIZE
17 : 172mm
TERMINAL
T : TERMINAL
L : LEAD WIRE
BEARING SYSTEM
B : BALL
S : SLEEVE
SPEED
H : HIGH
M: MIDDLE
L : LOW
SPEC. NO. A170028 REVISE DATE
ISSUE DATE 06. 22. 2001 E D I T I O N 0
建準電機工業股份有限公司
建準電機工業股份有限公司建準電機工業股份有限公司
建準電機工業股份有限公司
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD
.
P A G E 1 OF 7
A LBH5172
T C
Thermal Cutout
R
Round Frame
SUNON
AXIAL AC FAN
MODEL : A2175- HBL
TC.R
CHARACTERISTICS
1. Motor Design : Reliable Alveolate Motor Construction.
2. Insulation Resistance : 500Megohms minimum at 500 VAC.
3. Dielectric Strength : 1500 VAC for one minute.
4. Motor Protection : Thermal protected & Class B (II)
5. Noise Level : Measured in a semi-anechoic chamber
with background noise level below 15
dB(A). The fan is running in free air with
microphone at a distance of one meter
from the fan intake.
6. Air Performance : Measured by a double chamber. The value
are recorded when the fan speed is stabilized
at rated voltage.
7.Tolerances : ±15% on rated power and current.
SPEC. NO. A170028 REVISE DATE
ISSUE DATE 06. 22. 2001 E D I T I O N 0
建準電機工業股份有限公司
建準電機工業股份有限公司建準電機工業股份有限公司
建準電機工業股份有限公司
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD
.
P A G E 2 OF 7
SUNON
SPECIFICATIONS
MODEL : A2175- HBL
TC.R
1-1. Rated Voltage : 230 VAC 50/60 HZ
1-2. Operating Voltage Range : 150-245 VAC
1-3. Starting Voltage : 150 VAC
1-4. Rated Speed : 2800/3200 RPM ± 10%
1-5. Air D e livery : 203/239 CFM
1-6. Static Pressure : 0.62/0.69 Inch-H2O
1-7. Rated Current : 0.11/0.11 AMP
1-8. Input Power : 25/26 WATTS
1-9. Noise Level : 51/58 dB(A)
1-10. Direction of Rotation : Counter-clockwise viewed front fan blade
1-11. Motor Protection : Thermal Protected.
1-12. Operating Tem perature : -10 to +80 Deg.C
1-13. Storage Tem perature : -30 to +80 Deg.C
1-14. Bearing System : Precise ball bearing system
1-15. Weight : 908g
1-16. Safety : UL/CUR/TUV/CE Approvals
1-17. Vibration : Vibration of acceleration 1.5G and
Frequency 5~50~5Hz is applied in the
3 directions(X,Y,Z ) for 30 minutes, each
Direction at the cycle of 1 minute.
1-18. Life Expectancy : 50,000 Hrs at 25℃
℃℃
℃.
SPEC. NO. A170028 REVISE DATE
ISSUE DATE 06. 22. 2001 E D I T I O N 0
建準電機工業股份有限公司
建準電機工業股份有限公司建準電機工業股份有限公司
建準電機工業股份有限公司
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD
.
P A G E 3 OF 7
SUNON
MODEL : A2175-HBL
TC.R
PERFORMANCE CURVES
STATIC
PRESSURE
mm-H2O Inch-H2O
SPEC. NO. A170028 REVISE DATE
ISSUE DATE 06. 22. 2001 E D I T I O N 0
建準電機工業股份有限公司
建準電機工業股份有限公司建準電機工業股份有限公司
建準電機工業股份有限公司
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD
.
P A G E 4 OF 7
0 150 300
m3/min
CFM
0.80
0.40
24
16
8
0
50 HZ
60 HZ
0 4.24 8.48
SUNON
MATERIAL
2. Material
2-1. Frame : DIE-CAST ALUMINUM
2-2. Im peller : Thermoplastic PBT of UL 94V-0
2-3. Lead Wire : UL1007,18AWG
DIMENSIONS
Air Flow Direction: Label side.
UNITS：
：：
：mm
SPEC. NO. A170028 REVISE DATE
ISSUE DATE 06. 22. 2001 E D I T I O N 0
建準電機工業股份有限公司
建準電機工業股份有限公司建準電機工業股份有限公司
建準電機工業股份有限公司
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD
.
P A G E 5 OF 7
SUNON
SPEC. NO. A170028 REVISE DATE
ISSUE DATE 06. 22. 2001 E D I T I O N 0
建準電機工業股份有限公司
建準電機工業股份有限公司建準電機工業股份有限公司
建準電機工業股份有限公司
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD
.
P A G E 6 OF 7
Alveolate Motor
Thermal Cutout
Capacitor
With Capacitor
SUNON
Notes
1. SUNON will not guarantee the products if the application of our products is exceeded
the limitation which is specified on this specification.
2. In case of change of the specification specified on this document, a written notice is
requested in advance.
3. Please do not touch the impeller with pressure and never bring the fan with lead wire.
The bearings and lead wire may be damaged.
4. No guarantee on the products against the safety problem or failure caused by powder
dust, drop of water or insect.
5. If there is any data or related documentation different from this data sheet, this data
sheet is the principal reference.
6. For the purpose of MIS, please indicate SPEC No. on every order.
7. In case of the fan has no polarity protection function, wires with same color (electrode)
must be connected together during the assembly. (i.e. red + red, black + black)
or the fan will be damaged immediately.
8. Please do not use the fan in the environment of corrosive gas or liquid or any detrimental
gas.
9. Please do not store the fan in the environment of high / low temperature, high humidity
or any detrimental gas. Please store the fan within 6 months, every 6 months, there
shall be a leakage of electric current to the fan, even though the fan is stored in room
temperature.
10.While the fan is in operation, please do not lock the fan intentionally for a long period of
time, since the continuous stoppage will result in over-heat and damage of the fan.
11.During the installation of the fan, please pay substantial attention to possible noise
cause by resonance vibration and vibration.
12.During the testing of the fan, please be sure to use finger guard to insure safety.
13.Unless otherwise specified, if there is any doubt in the judgement, the temperature and
relative humidity range of environment will be take in according to the standard test
condition as 25℃
℃℃
℃ and 65%.
SPEC. NO. A170028 REVISE DATE
ISSUE DATE 06. 22. 2001 E D I T I O N 0
建準電機工業股份有限公司
建準電機工業股份有限公司建準電機工業股份有限公司
建準電機工業股份有限公司
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LTD
.
P A G E 7 OF 7
