Original Creation Date: 08/16/95
Last Update Date: 02/25/98
Last Major Revision Date: 08/16/95
MDLM119-X REV 0C1 MICROCIRCUIT DATA SHEET
HIGH SPEED DUAL COMPARATOR
General Description
The LM119 precision high speed dual comparator is fabricated on a single monolithic chip.
It is designed to operate over a wide range of supply voltages down to a single 5V logic
supply and ground. Furthermore, it has a higher gain and lower input current than other
devices. The uncommitted collector of the output stage makes the LM119 compatible with
RTL, DTL and TTL as well as capable of driving lamps and relays at currents up to 25 mA.
NS Part Numbers
LM119E-SMD*
LM119H-MLS
LM119H-QMLV**
LM119H-SMD***
LM119J-MLS
LM119J-QMLV****
LM119J-SMD*****
LM119W-MLS
LM119W-QMLV******
LM119W-SMD*******
LM119WG-SMD********
Industry Part Number
LM119
Prime Die
LM119
Controlling Document
See Features Page
Processing
MIL-STD-883, Method 5004
Quality Conformance Inspection
MIL-STD-883, Method 5005
Subgrp Description Temp ( C)
o
1 Static tests at +25
2 Static tests at +125
3 Static tests at -55
4 Dynamic tests at +25
5 Dynamic tests at +125
6 Dynamic tests at -55
7 Functional tests at +25
8A Functional tests at +125
8B Functional tests at -55
9 Switching tests at +25
10 Switching tests at +125
11 Switching tests at -55
1
MICROCIRCUIT DATA SHEET
MDLM119-X REV 0C1
Features
- Two independent comparators.
- Operates from a single 5V supply.
- Typically 80nS response time at +15V.
- Minimum fan-out of 2 each side.
- Maximum input current of 1uA over temperature.
- Inputs and outputs can be isolated from system ground.
- High common mode slew rate.
- SMD : 86014012A*, 5962-9679801VIA**, 8601401IA***, 5962-9679801VCA****,
8601401CA*****, 5962-9679801VHA******, 8601401HA*******,
8601401XA********
Although designed primarily for applications requiring operation from digital logic
supplies, the LM119 is fully specified for power supplies up to +15V. It features faster
response than the LM111 at the expense of higher power dissipation. However, the high
speed, wide operating voltage range and low package count make the LM119 much more
versatile than older devices.
2
MICROCIRCUIT DATA SHEET
MDLM119-X REV 0C1
(Absolute Maximum Ratings)
(Note 1)
Total Supply Voltage 36V
Output to Negative Supply Voltage 36V
Ground to Negative Supply Voltage 25V
Ground to Positive Supply Voltage 18V
Differential Input Voltage +5V
Input Voltage
(Note 3) +15V
ESD Tolerance
(Note 4) 800V
Power Dissipation
(Note 2) 500mW
Output Short Circuit Duration 10 seconds
Maximum Junction Temperature 150 C
Storage Temperature Range -65 C to 150 C
Lead Temperature 260 C(Soldering, 10 seconds)
Thermal Resistance
ThetaJA 89 C/W E Package (Still Air) 63 C/W E Package (500LF/Min Air flow) 162 C/W H Package (Still Air) 88 C/W H Package (500LF/Min Air flow) 94 C/W J Package (Still Air) 52 C/W J Package (500LF/Min Air flow) 215 C/W W Package (Still Air) 132 C/W W Package (500LF/Min Air flow) 215 C/W WG Package (Still Air) 132 C/W WG Package (500LF/Min Air flow)
ThetaJC 5 C/W E Package 31 C/W H Package 11 C/W J Package 13 C/W W Package 13 C/W WG Package
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur.
Operating Ratings indicate conditions for which the device is functional, but do not
guarantee specific performance limits. For guaranteed specifications and test
conditions, see the Electrical Characteristics. The guaranteed specifications apply
only for the test conditions listed. Some performance characteristics may degrade
when the device is not operated under the listed test conditions.
Note 2: The maximum power dissipation must be derated at elevated temperatures and is
dictated by Tjmax (maximum junction temperature), ThetaJA (package junction to
ambient thermal resistance), and TA (ambient temperature). The maximum allowable
power dissipation at any temperature is Pdmax = (Tjmax - TA)/ThetaJA or the number
given in the Absolute Maximum Ratings, whichever is lower.
Note 3: For supply voltages less than +15V the absolute maximum input voltage is equal to the
supply voltage.
Note 4: Human body model, 1.5K Ohm in series with 100pF.
3
MICROCIRCUIT DATA SHEET
MDLM119-X REV 0C1
Recommended Operating Conditions
Operating Temperature Range -55 C < TA < 125 C
4
MDLM119-X REV 0C1 MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vcm = 0V
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
Icc+ Positive Supply
Current +Vcc = +15V 11 mA 1
+Vcc = +15V 11.5 mA 2, 3
Icc- Negative Supply
Current +Vcc = +15V -4.2 mA 1
+Vcc = +15V -4.5 mA 2
+Vcc = +15V -6 mA 3
Ileak Output Leakage
Current +Vcc = 15V, -Vcc = -1V, Vgnd = 0V,
Vout = 35V 1 1.8 uA 1
1 10 uA 2, 3
Iib Input Bias
Current +Vcc = +15V 0.475 uA 1
+Vcc = +15V 0.95 uA 2, 3
Vcc = 5V 2 0.475 uA 1
2 .95 uA 2, 3
Vio Input Offset
Voltage Vcc = 5V, Vcm = 1V, Rs < 5K 2 -3.8 3.8 mV 1
Vcc = 5V, Vcm = 1V, Rs < 5K 2 -6.8 6.8 mV 2, 3
Vcc = 5V, Vcm = 3V, Rs < 5K 2 -3.8 3.8 mV 1
Vcc = 5V, Vcm = 3V, Rs < 5K 2 -6.8 6.8 mV 2, 3
+Vcc = +15V, Vcm = 12V, Rs < 5K -3.8 3.8 mV 1
+Vcc = +15V, Vcm = 12V, Rs < 5K -6.8 6.8 mV 2, 3
+Vcc = +15V, Vcm = -12V, Rs < 5K -3.8 3.8 mV 1
+Vcc = +15V, Vcm = -12V, Rs < 5K -6.8 6.8 mV 2, 3
Iio Input Offset
Current Vcc = 5V, Vcm = 1V 2 -75 75 nA 1
2 -100 100 nA 2, 3
Vcc = 5V, Vcm = 3V 2 -75 75 nA 1
2 -100 100 nA 2, 3
+Vcc = +15V, Vcm = 12V -75 75 nA 1
+Vcc = +15V, Vcm = 12V -100 100 nA 2, 3
+Vcc = +15V, Vcm = -12V -75 75 nA 1
+Vcc = +15V, Vcm = -12V -100 100 nA 2, 3
Vi Input Voltage
Range Vcc = 5V 2, 3 1 3 V 1, 2,
3
Vcc = +15V 3 -12 12 V 1, 2,
3
5
MDLM119-X REV 0C1 MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vcm = 0V
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
Vsat Output Saturation
Voltage Vcc = 15V, Iout = 25mA, Vin < -5mV 1 1.5 V 1, 2,
3
+Vcc = 3.5V, -Vcc = -1V, Vin < -6mV,
Isink < 3.2mA 0.4 V 1, 2
+Vcc = 3.5V, -Vcc = -1V, Vin < -6mV,
Isink < 3.2mA 0.6 V 3
Av Voltage Gain +Vcc = +15V, Delta Vout = 12V 4 10.5 K 4
+Vcc = +15V, Delta Vout = 12V 4 10 K 5, 6
Vcc = 5V, Delta Vout = 4.5V 2, 4 8 K 4
2, 4 5 K 5
2, 4 5.8 K 6
CMRR Common Mode
Rejection Ratio +Vcc = +15V, Vcm = +12V 80 dB 4
DC PARAMETERS: DRIFT VALUES
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vcm = 0V. Delta calculations performed on JAN S and QMLV devices at group B, subgroup 5 ONLY.
Icc+ Positive Supply
Current +Vcc = +15V -1 1 mA 1
Icc- Negative Supply
Current +Vcc = +15V -0.5 0.5 mA 1
Vio Input Offset
Voltage Vcc = 5V, Vcm = 1V, Rs < 5K -0.4 0.4 mV 1
Note 1: Vin > 8mV at extremes for Ileak and Vin < -8mV at extremes for Vsat (Vin to exceed
Vos).
Note 2: 5 Volt differential across +Vcc and -Vcc.
Note 3: Parameter guaranteed by Vio and Iio tests.
Note 4: K = V/mV.
6
MICROCIRCUIT DATA SHEET
MDLM119-X REV 0C1
Graphics and Diagrams
GRAPHICS# DESCRIPTION
6142HRA2 LCC (E), TYPE C, 20 TERMINAL (B/I CKT)
8906HRB2 (blank)
9078HRB3 CERPACK (W), 10 LEAD (B/I CKT)
9641HRA2 (blank)
E20ARE LCC (E), TYPE C, 20 TERMINAL(P/P DWG)
H10CRF METAL CAN (H), TO-100, 10LD, .230 DIA PC (P/P DWG)
J14ARH CERDIP (J), 14 LEAD (P/P DWG)
P000182A CERDIP (J), 14 LEAD (PINOUT)
P000196A LCC (E), 20 LEAD (PINOUT)
P000197A METAL CAN (H), 10 LEAD (PINOUT)
P000198A CERPACK (W), 10 LEAD (PINOUT)
P000237A CERAMIC SOIC (WG), 10 LEAD (PINOUT)
W10ARG CERPACK (W), 10 LEAD (P/P DWG)
WG10ARC CERAMIC SOIC (WG), 10 LEAD (P/P DWG)
See attached graphics following this page.
7
N
MIL/AEROSPACE OPERATIONS
2900 SEMICONDUCTOR DRIVE
SANTA CLARA, CA 95050
1 14
2 13
3 12
4 11
5 10
6 9
7 8
N/C
N/C
GND 1
IN+ 1
IN- 1
V-
OUTPUT 2 GND 2
IN+ 2
IN- 2
V+
OUTPUT 1
N/C
N/C
14 - LEAD DIP
LM119J
TOP VIEW
CONNECTION DIAGRAM
P000182A
N
N
N
N
MICROCIRCUIT DATA SHEET
MDLM119-X REV 0C1
Revision History
Rev ECN # Rel Date Originator Changes
0B0 M0001371 02/25/98 Barbara Lopez Added Power Dissipation - Note 2 in Absolute section.
Renumbered all other notes. Archive MDS - MDLM119-X
Rev. 0A0. Release MDS - MDLM119-X Rev. 0B0.
0C1 M0002726 02/25/98 Barbara Lopez Update MDS: MDLM119-X Rev. 0B0 to MDLM119-X Rev. 0C1.
Added WG package to MDS. Added MKT outline, Burn-In
CKT and Pinouts.
8
