SS Subminiature Basic Switch Subminiature Basic Switch Offers High Reliability and Security The OMRON's best-selling micro switches of a wide variety from 0.1A to 10.1A. A variety of models are available, with operating force ranging from low to high. Two split springs ensure a high stability and durability of 30,000,000 operations. 1 mm MIN Contact Gap Models available for Interlock applications S S RoHS Compliant Model Number Legend 1 SS-@ 1. Ratings 10 : 250 VAC 10.1A 5 : 125 VAC 5 A 01 : 30 VDC 0.1A 2 @ 3 @ 4 @ 5 @ 6 @ 4. Contact form None : SPDT -2 : SPST-NC -3 : SPST-NO 2. Actuator 5. Terminals None : Pin plunger None : Solder terminals GL : Hinge lever T : Quick-connect terminals (#110) GL111 : Long hinge lever D : PCB terminals GL13 : Simulated roller lever 6. Heat resistance GL2 : Hinge roller lever None : Standard (85C) GL02 : Hinge roller lever -T : Heat-resistant (120C) (Roller material: Stainless) heat-resistant 3. Maximum Operating Force (OF) None : 1.47 N {150 gf} Note. These values are for the pin plunger models. -F : 0.49 N {50 gf} (0.1 A, 5 A) -E : 0.25 N {25 gf} (0.1 A) List of Models Standard Models Actuator Terminals Solder terminals Quick-connect terminals (#110) PCB terminals Solder terminals Pin plunger Quick-connect terminals (#110) PCB terminals Solder terminals Quick-connect terminals (#110) PCB terminals Ratings Contact Form Maximum Operating Force (OF) SPDT SPST-NC SPST-NO SPDT SPST-NC 1.47 N {150 gf} SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC 0.49 N {50 gf} SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC 0.25 N {25 gf} SPST-NO SPDT SPST-NC SPST-NO Separator (Sold Separately), Terminal Connector (Sold Separately) 10.1 A 5A 0.1 A SS-10 SS-10-2 SS-10-3 SS-10T SS-10-2T SS-10-3T SS-10D SS-10-2D SS-10-3D - SS-5 SS-5-2 SS-5-3 SS-5T SS-5-2T SS-5-3T SS-5D SS-5-2D SS-5-3D SS-5-F SS-5-F-2 SS-5-F-3 SS-5-FT SS-5-F-2T SS-5-F-3T SS-5-FD SS-5-F-2D SS-5-F-3D - SS-01 SS-01-2 SS-01-3 SS-01T SS-01-2T SS-01-3T SS-01D SS-01-2D SS-01-3D SS-01-F SS-01-F-2 SS-01-F-3 SS-01-FT SS-01-F-2T SS-01-F-3T SS-01-FD SS-01-F-2D SS-01-F-3D SS-01-E SS-01-E-2 SS-01-E-3 SS-01-ET SS-01-E-2T SS-01-E-3T SS-01-ED SS-01-E-2D SS-01-E-3D Refer to "Basic Switch Common Accessories" 1 SS Subminiature Basic Switch Actuator Terminals Solder terminals Quick-connect terminals (#110) PCB terminals Solder terminals S S Hinge lever Quick-connect terminals (#110) PCB terminals Solder terminals Quick-connect terminals (#110) PCB terminals Solder terminals Quick-connect terminals (#110) PCB terminals Solder terminals Long hinge lever Quick-connect terminals (#110) PCB terminals Solder terminals Quick-connect terminals (#110) PCB terminals Solder terminals Quick-connect terminals (#110) PCB terminals Solder terminals Simulated roller lever Quick-connect terminals (#110) PCB terminals Solder terminals Quick-connect terminals (#110) PCB terminals Contact Form SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO Ratings Maximum Operating Force (OF) 0.49 N {50 gf} 0.16 N {16 gf} 0.08 N {8 gf} 0.39 N {40 gf} 0.12 N {12 gf} 0.06 N {6 gf} 0.49 N {50 gf} 0.16 N {16 gf} 0.08 N {8 gf} Separator (Sold Separately), Terminal Connector (Sold Separately) 2 10.1 A 5A 0.1 A SS-10GL SS-10GL-2 SS-10GL-3 SS-10GLT SS-10GL-2T SS-10GL-3T SS-10GLD SS-10GL-2D SS-10GL-3D SS-10GL111 SS-10GL111-2 SS-10GL111-3 SS-10GL111T SS-10GL111-2T SS-10GL111-3T SS-10GL111D SS-10GL111-2D SS-10GL111-3D SS-10GL13 SS-10GL13-2 SS-10GL13-3 SS-10GL13T SS-10GL13-2T SS-10GL13-3T SS-10GL13D SS-10GL13-2D SS-10GL13-3D - SS-5GL SS-5GL-2 SS-5GL-3 SS-5GLT SS-5GL-2T SS-5GL-3T SS-5GLD SS-5GL-2D SS-5GL-3D SS-5GL-F SS-5GL-F-2 SS-5GL-F-3 SS-5GL-FT SS-5GL-F-2T SS-5GL-F-3T SS-5GL-FD SS-5GL-F-2D SS-5GL-F-3D SS-5GL111 SS-5GL111-2 SS-5GL111-3 SS-5GL111T SS-5GL111-2T SS-5GL111-3T SS-5GL111D SS-5GL111-2D SS-5GL111-3D SS-5GL111-F SS-5GL111-F-2 SS-5GL111-F-3 SS-5GL111-FT SS-5GL111-F-2T SS-5GL111-F-3T SS-5GL111-FD SS-5GL111-F-2D SS-5GL111-F-3D SS-5GL13 SS-5GL13-2 SS-5GL13-3 SS-5GL13T SS-5GL13-2T SS-5GL13-3T SS-5GL13D SS-5GL13-2D SS-5GL13-3D SS-5GL13-F SS-5GL13-F-2 SS-5GL13-F-3 SS-5GL13-FT SS-5GL13-F-2T SS-5GL13-F-3T SS-5GL13-FD SS-5GL13-F-2D SS-5GL13-F-3D - SS-01GL SS-01GL-2 SS-01GL-3 SS-01GLT SS-01GL-2T SS-01GL-3T SS-01GLD SS-01GL-2D SS-01GL-3D SS-01GL-F SS-01GL-F-2 SS-01GL-F-3 SS-01GL-FT SS-01GL-F-2T SS-01GL-F-3T SS-01GL-FD SS-01GL-F-2D SS-01GL-F-3D SS-01GL-E SS-01GL-E-2 SS-01GL-E-3 SS-01GL-ET SS-01GL-E-2T SS-01GL-E-3T SS-01GL-ED SS-01GL-E-2D SS-01GL-E-3D SS-01GL111 SS-01GL111-2 SS-01GL111-3 SS-01GL111T SS-01GL111-2T SS-01GL111-3T SS-01GL111D SS-01GL111-2D SS-01GL111-3D SS-01GL111-F SS-01GL111-F-2 SS-01GL111-F-3 SS-01GL111-FT SS-01GL111-F-2T SS-01GL111-F-3T SS-01GL111FD SS-01GL111-F-2D SS-01GL111-F-3D SS-01GL111-E SS-01GL111-E-2 SS-01GL111-E-3 SS-01GL111-ET SS-01GL111-E-2T SS-01GL111-E-3T SS-01GL111-ED SS-01GL111-E-2D SS-01GL111-E-3D SS-01GL13 SS-01GL13-2 SS-01GL13-3 SS-01GL13T SS-01GL13-2T SS-01GL13-3T SS-01GL13D SS-01GL13-2D SS-01GL13-3D SS-01GL13-F SS-01GL13-F-2 SS-01GL13-F-3 SS-01GL13-FT SS-01GL13-F-2T SS-01GL13-F-3T SS-01GL13-FD SS-01GL13-F-2D SS-01GL13-F-3D SS-01GL13-E SS-01GL13-E-2 SS-01GL13-E-3 SS-01GL13-ET SS-01GL13-E-2T SS-01GL13-E-3T SS-01GL13-ED SS-01GL13-E-2D SS-01GL13-E-3D Refer to "Basic Switch Common Accessories" SS Subminiature Basic Switch Actuator Terminals Solder terminals Quick-connect terminals (#110) PCB terminals Solder terminals Hinge roller lever Quick-connect terminals (#110) PCB terminals Solder terminals Quick-connect terminals (#110) PCB terminals Ratings Contact Form Maximum Operating Force (OF) SPDT SPST-NC SPST-NO SPDT SPST-NC 0.49 N {50 gf} SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC 0.16 N {16 gf} SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC SPST-NO SPDT SPST-NC 0.08 N {8 gf} SPST-NO SPDT SPST-NC SPST-NO 10.1 A 5A 0.1 A SS-10GL2 SS-10GL2-2 SS-10GL2-3 SS-10GL2T SS-10GL2-2T SS-10GL2-3T SS-10GL2D SS-10GL2-2D SS-10GL2-3D - SS-5GL2 SS-5GL2-2 SS-5GL2-3 SS-5GL2T SS-5GL2-2T SS-5GL2-3T SS-5GL2D SS-5GL2-2D SS-5GL2-3D SS-5GL2-F SS-5GL2-F-2 SS-5GL2-F-3 SS-5GL2-FT SS-5GL2-F-2T SS-5GL2-F-3T SS-5GL2-FD SS-5GL2-F-2D SS-5GL2-F-3D - SS-01GL2 SS-01GL2-2 SS-01GL2-3 SS-01GL2T SS-01GL2-2T SS-01GL2-3T SS-01GL2D SS-01GL2-2D SS-01GL2-3D SS-01GL2-F SS-01GL2-F-2 SS-01GL2-F-3 SS-01GL2-FT SS-01GL2-F-2T SS-01GL2-F-3T SS-01GL2-FD SS-01GL2-F-2D SS-01GL2-F-3D SS-01GL2-E SS-01GL2-E-2 SS-01GL2-E-3 SS-01GL2-ET SS-01GL2-E-2T SS-01GL2-E-3T SS-01GL2-ED SS-01GL2-E-2D SS-01GL2-E-3D 10.1 A 5A 0.1 A Heat Resistant Models Actuator Pin plunger Hinge lever Long hinge lever Simulated roller lever Hinge roller lever (Roller material: stainless steel) Terminals Solder terminals Quick-connect terminals (#110) PCB terminals Solder terminals Quick-connect terminals (#110) PCB terminals Solder terminals Quick-connect terminals (#110) PCB terminals Solder terminals Quick-connect terminals (#110) PCB terminals Solder terminals Quick-connect terminals (#110) PCB terminals Ratings Contact Form Maximum Operating Force (OF) 1.47 N {150 gf} 0.49 N {50 gf} SPDT 0.39 N {40 gf} 0.49 N {50 gf} 0.49 N {50 gf} SS-10-T SS-5-T SS-01-T SS-10T-T SS-5T-T SS-01T-T SS-10D-T SS-10GL-T SS-5D-T SS-5GL-T SS-01D-T SS-01GL-T SS-10GLT-T SS-5GLT-T SS-01GLT-T SS-10GLD-T SS-10GL111-T SS-5GLD-T SS-5GL111-T SS-01GLD-T SS-01GL111-T SS-10GL111T-T SS-5GL111T-T SS-01GL111T-T SS-10GL111D-T SS-10GL13-T SS-5GL111D-T SS-5GL13-T SS-01GL111D-T SS-01GL13-T SS-10GL13T-T SS-5GL13T-T SS-01GL13T-T SS-10GL13D-T SS-10GL02-T SS-5GL13D-T SS-5GL02-T SS-01GL13D-T SS-01GL02-T SS-10GL02T-T SS-5GL02T-T SS-01GL02T-T SS-10GL02D-T SS-5GL02D-T SS-01GL02D-T 1 mm MIN Contact Gap Models Actuator Long hinge lever Terminals Solder terminals Quick-connect terminals (#110) Ratings Contact Form Maximum Operating Force (OF) SPST-NO 0.54 N {55 gf} Contact Form SPDT 10.1 A SPST-NC SPST-NO Item Contact NO NC 0.1 A SS-5FL111-3 - - SS-5FL111-3T - Contact Specifications Model Specification COM 5A - COM NC COM NO Inrush current Material Gap (standard value) NC NO Minimum applicable load (reference value)* * SS-10 models SS-5 models SS-01 models Crossbar Rivet Silver Gold alloy Silver 0.25 mm 1mm min. Rivet Silver alloy 0.5 mm 20 A max. 15 A max. 10 A max. 5 VDC 160 mA SS-5F models 1 A max. - 1 A max. 10 A max. 5 VDC 1 mA 5 VDC 160 mA Please refer to "Using Micro Loads" in "Precautions" for more information on the minimum applicable load. Separator (Sold Separately), Terminal Connector (Sold Separately) Refer to "Basic Switch Common Accessories" 3 S S SS Subminiature Basic Switch Ratings Characteristics Item Rated voltage SS-10 models 250 VAC 10.1 A SS-5 models 125 VAC 250 VAC 5A 3A 125 VAC 0.1 A 30 VDC 0.1 A SS-01 models S S Resistive load Model SS-5F models 250 VAC 3A 30 VDC 5A Note. The above rating values apply under the following test conditions. (1) Ambient temperature: 202C (2) Ambient humidity: 655% (3) Operating frequency: 30 operations/min Approved Safety Standards Models shown in the "List of Models" are UL and CSA approved models. Note. Note that heat resistant models are not standard approved models. UL (UL1054)/CSA (CSA C22.2 No.55) Model SS-10 SS-5 SS-01 SS-5F Rated voltage 125 VAC 250 VAC 10.1 A 5A 3A 0.1 A - 3A 30 VDC - - 0.1 A 5A Consult your OMRON sales representative for specific models with VDE standard approvals. VDE (EN61058-1) Model Rated voltage 250 VAC Item Permissible operating speed Model SS-10 models SS-5 models SS-01 models SS-5F models 0.1 mm to 1 m/s (for pin plunger models) Permissible Mechanical operating Electrical frequency 400 operations/min 60 operations/min Insulation resistance 100 M min. (at 500 VDC with insulation tester) 30 m max. 50 m max. 30 m max. 50 m max. 100 m max. 150 m max. 1,000 VAC 600 VAC 50/60 Hz for 1,000 VAC 50/60 Hz for 1 min 50/60 Hz for 1 min 1 min OF 1.47 N models OF 0.49 N models OF 0.25 N models Contact resistance (initial value) Between terminals of the same polarity Dielectric Between current-carrying strength *1 metal parts and ground Between each terminals and non-current-carrying metal parts Vibration resistance Malfunction *2 OF 1.47 N models Durability OF 0.49 N models OF 0.25 N models Shock resistance OF 1.47 N models Malfunction OF 0.49 N models *2 OF 0.25 N models 1,500 VAC 50/60 Hz for 1 min 1,500 VAC 50/60 Hz for 1 min 10 to 55 Hz, 1.5 mm double amplitude 1,000 m/s2 {approx. 100G} max. 500 m/s2 {approx. 50G} max. 500 m/s2 {approx. 50G} max. 300 m/s2 {approx. 30G} max. 200 m/s2 {approx. 20G} max. 200 m/s2 {approx. 20G} max. Mechanical 10,000,000 operations min. 30,000,000 operations min. (60 operations/min) (60 operations/min) Electrical 50,000 operations min. (30 operations/min) Durability *3 Degree of protection Degree of protection against electric shock Proof tracking index (PTI) SS-5 SS-5F 10 A 5A 3A Testing conditions: 5E4 (50,000 operations) T85 (0C to 85C) 100,000 operations min. (60 operations/min) 100,000 operations min. (30 operations/min) IEC IP40 Class I 175 -25C to +85C (at ambient humidity of 60% max.) (with no icing or condensation) 85% max. (for +5C to +35C) Approx. 1.6g (pin plunger models) Ambient operating temperature SS-10 200,000 operations min. (30 operations/min) - Ambient operating humidity Weight Note. The data given above are initial values. *1. The values for dielectric strength shown are for models with a Separator (refer to "Micro Switch Common Accessories"). *2. The values are at Free Position and Total Travel Position values for pin plunger, and Total Travel Position value for lever. Close or open circuit of the contact is 1ms max. *3. For testing conditions, consult your OMRON sales representative. Terminals/Appearances (Unit: mm) Solder terminals Quick connect terminals (#110) 2.9 2.9 2.9 3.3 6.4 7.1 1.6 8.8 9.50.1 19.8 0.5 7.3 3.2 6.4 PCB terminals 3-1.6 dia. holes 1.6 8.8 9.50.1 19.8 3-1.2 dia. holes 0.5 2.8 7.3 3.2 0.6 10.6 1.6 8.8 9.50.1 19.8 0.5 0.5 1.2 7.3 3.2 t=0.5 <PCB Mounting Dimensions (Reference)> 3-1.35~1.5 dia. (1.6) 8.8+0.15 -0.05 16.10.1 Note. SPST-NO terminal models do not have NC terminal. Mounting Holes (Unit: mm) 2-2.4 dia. mounting holes or M2.3 screw holes 9.50.1 4 7.0 SS Subminiature Basic Switch Dimensions (Unit: mm) and Operating Characteristics The illustrations and drawings are for solder terminals models. Refer to "Terminals/Appearances" of the previous page for details on models with quick connect terminals (#110) or PCB terminals. Pin plunger SS-10 SS-5 (-F) SS-01 (-E, -F) 7.5 PT 3.2 2 A OP 2.35+0.075 -0.05 9.5 10.2 2.9 6.4 2.5 2.35+0.075 -0.05 dia. 2.50.07 dia. 1.6 5.1 holes 3.2 6.4 0.5 8.8 7.3 9.50.1 19.8 Model Operating Characteristics Operating Force Releasing Force OF RF Pretravel PT Overtravel OT Movement Differential MD Operating Position Hinge lever SS-10GL SS-5GL (-F) SS-01GL (-E, -F) S S 3-1.6 dia. holes SS-5 SS-01 Max. 1.47 N {150 gf} 1.47 N {150 gf} Min. 0.25 N {25 gf} 0.25 N {25 gf} Max. Min. Max. 0.6 mm 0.4 mm 0.12 mm 0.5 mm 0.5 mm 0.1 mm OP SS-5-F SS-01-F SS-01-E 0.49 N {50 gf} 0.04 N {4 gf} 0.25 N {25 gf} 0.02 N {2 gf} 0.5 mm 0.5 mm 0.1 mm 0.5 mm 0.5 mm 0.1 mm 8.40.5 mm A 14.5 t=0.3* SS-10 3.6 FP 2.35+0.075 -0.05 9.5 10.2 OP 2.9 6.4 2.5 2.35+0.075 -0.05 2.50.07 dia. 1.6 5.1 dia. holes 3.2 6.4 0.5 8.8 7.3 Note. The indicated reference values of RF are for cases where the lever weight is not applied to the plunger. 9.50.1 19.8 * Stainless-steel lever Model Operating Characteristics Operating Force Releasing Force Long hinge lever SS-10GL111 SS-5GL111 (-F) SS-01GL111 (-E, -F) SS-5FL111-3 Free Position Operating Position Max. A 22.6 9.5 10.2 NO FP OP SS-10GL SS-5GL SS-01GL SS-5GL-F SS-01GL-F Max. 0.49 N {50 gf} 0.49 N {50 gf} 0.16 N {16 gf} Min. 0.06 N {6 gf} 0.06 N {6 gf} 0.02 N {2 gf} Min. Max. 2.35+0.075 -0.05 C OF RF Overtravel OT Movement Differential MD t=0.3* 2.9 3-1.6 dia. holes 1.0 mm 1.0 mm 1.2 mm 0.8 mm 1.2 mm 0.8 mm SS-01GL-E 0.08 N {8 gf} 0.01 N {1 gf} (reference value) 1.2 mm 0.8 mm 13.6 mm 8.80.8 mm 3.6 OP FP NC 6.4 2.5 2.35+0.075 -0.05 dia. holes 2.50.07 dia. 1.6 8.8 5.1 9.50.1 19.8 3.2 6.4 0.5 7.3 Note. The indicated reference values of RF are for cases where the lever weight is not applied to the plunger. * Stainless-steel lever Model SS-10GL111 SS-5GL111 SS-01GL111 SS-5FL111-3 Max. 0.39 N {40 gf} Min. 0.03 N {3 gf} 0.39 N {40 gf} 0.03 N {3 gf} 0.54 N {55 gf} 0.01 N {1 gf} 0.12 N {12 gf} 0.02 N {2 gf} (reference value) 0.06 N {6 gf} 0.003 N {0.3 gf} (reference value) 1.2 mm 1.2 mm 1.0 mm 3.0 mm 1.2 mm 1.2 mm 1.2 mm 1.2 mm Operating Characteristics Operating Force Releasing Force 3-1.6 dia. holes OF RF Overtravel OT Movement Differential MD Min. Max. Free Position FP Max. Operating Position OP 1.2 mm 1.2 mm SS-5GL111-F SS-01GL111-F SS-01GL111-E 16.8 mm 8.81.5 mm 8.82 mm Note 1. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction ( ). 5 SS Subminiature Basic Switch Simulated roller lever SS-10GL13 SS-5GL13 (-F) SS-01GL13 (-E, -F) A 15.8 R1.3 t=0.3* 3.6 FP 2.35+0.075 -0.05 OP 9.5 10.2 2.9 6.4 2.5 2.35+0.075 -0.05 dia. holes 2.50.07 dia. 1.6 S S 5.1 3.2 6.4 0.5 8.8 7.3 Note. The indicated reference values of RF are for cases where the lever weight is not applied to the plunger. 9.50.1 19.8 * Stainless-steel lever Model Operating Characteristics Operating Force Releasing Force Hinge roller lever SS-10GL2 SS-5GL2 (-F) SS-01GL2 (-E, -F) 3-1.6 dia. holes SS-10GL13 SS-5GL13 SS-01GL13 SS-5GL13-F SS-01GL13-F SS-01GL13-E OF RF Max. Min. 0.49 N {50 gf} 0.06 N {6 gf} 0.49 N {50 gf} 0.06 N {6 gf} 0.16 N {16 gf} 0.02 N {2 gf} 0.08 N {8 gf} 0.01 N {1 gf} (reference value) Overtravel OT Movement Differential MD Min. Max. 1.0 mm 1.0 mm 1.2 mm 0.8 mm 1.2 mm 0.8 mm 1.2 mm 0.8 mm Free Position Operating Position Max. FP OP A 14.5 15.5 mm 10.70.8 mm *2 4.8x3.2 dia. t=0.3 * 1 FP OP 2.35+0.075 -0.05 9.5 10.2 2.9 6.4 2.5 2.35+0.075 -0.05 2.50.07 dia. 1.6 5.1 dia. holes 7.3 9.50.1 19.8 *1. Stainless-steel lever *2. Polyacetal resin roller Model Operating Characteristics Operating Force Releasing Force OF RF Max. Min. Overtravel OT Movement Differential MD Min. Max. Free Position Operating Position Max. Note 1. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction ( ). 6 3.2 6.4 0.5 8.8 FP OP 3-1.6 dia. holes Note. The indicated reference values of RF are for cases where the lever weight is not applied to the plunger. SS-5GL2 SS-01GL2 SS-5GL2-F SS-01GL2-F 0.49 N {50 gf} 0.06 N {6 gf} 0.49 N {50 gf} 0.06 N {6 gf} 0.16 N {16 gf} 0.02 N {2 gf} 0.08 N {8 gf} 0.01 N {1 gf} (reference value) 1.0 mm 1.0 mm 1.2 mm 0.8 mm 1.2 mm 0.8 mm 1.2 mm 0.8 mm SS-10GL2 19.3mm 14.50.8mm SS-01GL2-E SS Subminiature Basic Switch Precautions Please refer to "Common Precautions" for correct use. Cautions * Complete the soldering at the iron tip temperature below 350C within 5 seconds, and do not apply any external force for 1 minute after soldering. Soldering at an excessively high temperature or soldering for more than 5 seconds may deteriorate the characteristics of the Switch. * Be sure to apply only the minimum required amount of flux. Switch may have contact failures if flux intrudes into the interior of the Switch. * If the PCB terminal models are soldered in the solder bath, flux will permeate inside the Switch and cause contact failure. Therefore, manually solder the PCB terminal. Mounting * Use M2.3 mounting screw with plane washers or spring washers to securely mount the Switch. Tighten the screws to a torque of 0.23 to 0.26 N*m {2.3 to 2.7 kgf*cm}. * Mount the Switch onto a flat surface. Mounting on an uneven surface may cause deformation of the Switch, resulting in faulty operation or breakage in the housing. Using Micro Loads Using a model for ordinary loads to open or close the contact of a micro load circuit may result in faulty contact. Use models that operate in the following range. However, even when using micro load models within the following operating range, if inrush current occurs when the contact is opened or closed, it may increase the contact wear and so decrease durability. Therefore, insert a contact protection circuit where necessary. The N-level reference value applies for the minimum applicable load. This value indicates the malfunction reference level for the reliability level of 60% (60). (JIS C5003) The equation, 60=0.5x10-6/operation indicates that the 1 estimated malfunction rate is less than 2,000,000 operations with a reliability level of 60%. Voltage (V) Soldering Correct Use 30 0.16mA 26 mA 100 mA 24 Operating range for micro-load model SS-01 Operating range for general-load models SS-5 SS-10 12 5 1 mA 100 mA 160mA 0 0.1 1 10 100 1,000 Current (mA) 7 S S SS Subminiature Basic Switch S S * Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. * Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation ELECTRONIC AND MECHANICAL COMPONENTS COMPANY 8 Contact: www.omron.com/ecb Cat. No.B032-E1-14 0716(0207)(O)