D sub:Layout 1 3/24/09 12:37 PM Page 1
www.ittcannon.com
Cannon, VEAM, BIW
A Historical Achievement of Technology Leadership
Defining and Championing Innovation
Showcasing a portfolio of creativity, ITTʼs “Engineered For Life” execution embraces products which have be-
come ubiquitous in a broad collection of markets including: Military/Aerospace, Civil Aircraft, Industrial Instru-
mentation, Medical, Oil & Gas, Energy, Transportation, Telecom/Handset, Computer, Consumer, and
Automotive.
ITTʼs rich interconnect history embraces contributions to both technological breakthroughs and social move-
ments. With one of the industryʼs broadest product offerings, ITTʼs interconnect products have supported:
• Every Free World space mission, bringing the universe to our doorstep.
• Motion picture, radio, and television equipment, serving laughter and entertainment to millions.
• Commercial and military communications systems, linking the voices of the world.
• Computerized tools, reshaping the information highway.
• Aircraft, rapid transit, and automobiles, mobilizing our expanding society.
• Oil and natural gas production, powering the worldʼs economies.
• Agricultural equipment, attacking the roots of world hunger.
1915
1920
1930
1940
1950
1960
1970
1980
The
Beginning
Charting
the Future
Power, Film,
Commercial
Aviation Military Telecom Space Medical,
Transportation
Growth
Cannon partners
with technology
leaders to develop
the first complete
fiber optic
systems Technology
Leadership
Lean
manufacturing
Internet deployed
systems
Pioneering
technologies
Engineered
solutions
Cannon pioneers
guided missle
umbilical
connectors
The first aviation
circular & rack
panel connectors
developed by
Cannon
Cannon’s AF
Firewall connectors
used in early
DC-3 transports
Cannon develops
the first
Tri-Service
connector, the
mother of modern
day military
spec’s
Cannon’s
X connector is the
first microminiature
audio connector
Cannon develops
the first “Micro”
connectors
Cannon establishes
an aviation milestone
through the expansion
of Rack and Panel
connectors with the
BKAD/E Series
Cannon’s first entry
into the Medical
Electronics market
Cannon originates
the first “D-Sub”
connectors +2000
Cannon creates
“AN” military
plugs
Cannon creates
“K” series
connectors for
DC-1’s
First
“Cannon Plug”
4 Pole Power
Connector
The first commercial and power connectors
Cannon connectors made possible the first
radio microphones, the first black and white
television cameras as well as the first
color television equipment.
Cannon
founded by
James Cannon
Cannon pioneers
sound and film
connectors with
the M Series
Breakaway
Chip-on-Flex
PHD
Quadrax
Stacking
Photo courtesy of The Academy of
Motion Pictures, Arts and Sciences.
Inside front cvr & TOC:Layout 1 3/24/09 11:55 AM Page 1
Description
D Subminiature Accessories
Accessory Selection Guide.................................2-3
•Metal Backshell
Die Cast Zinc, EMI Shielded Straight Exit . . . . . . . . . . . . . . . . . . . . 4
MetalBackshellStraightExit.............................5
MetalBackshell45°Exit................................15
Clamps............................................7-8
•Plastic Backshell
Snap-Together Metalized Plastic, EMI Shielded . . . . . . . . . . . . . . . 9
Locking Hardware for Snap-Together Plastic Backshell . . . . . . . . . 10
Low Cost Metalized Plastic, Straight Exit . . . . . . . . . . . . . . . . . . . 10
Snap-TogetherUniversal................................11
One-PieceSnap-Together...............................11
One-PieceStraightExit.................................12
One-PiecePlastic,90°Exit ..............................12
•Locking Hardware
ScrewLockAssemblies..............................13-14
SlideLockAssemblies..................................15
SpringLatchAssemblies................................16
Jackscrew/Jackpot Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
•Guide Pin Plate
FemaleGuidePinPlate.................................18
MaleGuidePinPlate..................................19
•Connector Saver
High Reliability Connector Saver . . . . . . . . . . . . . . . . . . . . . . . . . 20
•Miscellaneous
PolarizingPlates......................................21
RightAngleBrackets ..................................21
WireHoleFillers......................................21
DustCap ...........................................22
InterfacialSeal.......................................22
PottingShell.........................................22
Part Number Index.........................................23
Product Safety Warranty ...................................25
Table of Contents
Cannon D Subminiature Accessories
www.ittcannon.com
NEW TOC:Layout 1 3/26/09 10:34 AM Page 1
DCannon D-Subminiature Accessories
2www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Selection Guide
Supplied with backshell
• Optional compatible locking hardware
— Not compatible
Locking Hardware
Sliding Lock
Female Screw Lock Male Screw Lock Retainer Slide Lock Post Spring Latch Plate Spring Latch
Backshell Style see page 14 see page 13 see page 15 see page 15 see page 16 see page 16
EMI Shielded Snap-Together
Metalized Plastic
Straight Exit ——————
see page 9
EMI Shielded Snap-Together
Metalized Plastic
50º Exit ——————
see page 9
EMI Shielded Die Cast Zinc
Metal — —— — —
see page 4
Metal Metal Backshell
45º Exit ——————
see page 4
Metal Deep Straight
Clamp ••••••
see page 7
Metal Round Cable
Clamp ••••••
see page 7
Metal Short Straight
Clamp ••••••
see page 8
Metal 90º Entry ••••••
see page 8
Plastic Snap-Together
Universal ••————
see page 11
Plastic One-Piece
Snap-Together — —— — —
see page 11
Plastic One-Piece Plastic
Straight Exit —— • • • •
see page 12
Plastic One-Piece Plastic
90º Exit —— • • • •
see page 12
D sub:Layout 1 3/24/09 12:37 PM Page 2
DCannon D-Subminiature Accessories
3
www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Selection Guide
Locking Hardware
Jackpost for
Jackscrew Assembly Jackpost Assembly Recessed Jackscrew Extended Jackscrew Thumbscrew In-Line Connections
see page 17 see page 17 see page 10 see page 10 see page 10 see page 10
—— • • • •
—— • • • •
—— — ———
——————
—•————
—• ————
—• ————
—— — ———
—— — ———
—— — ———
—— — ———
—— — ———
D sub:Layout 1 3/24/09 12:37 PM Page 3
4www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Metal Backshell
B
9 and 15
Position
25
Position
37 and 50
Position
BB
C
C
E Dia. E Dia. E Dia.
A
AA
F
D
DD
FF
1
1
1
3
3
3
5
5
56
4
44
2
22
9 and 15 Position* 25 Position* 37 and 50 Position*
Die Cast Zinc Backshell, Straight Exit, EMI Shielded
Die cast metal backshells reduce EMI/RFI emis-
sions. Die cast metal backshells offer improved
shielding in a rugged package.
Compression inserts accommodate a wide variety
of cable sizes.
db
0
-10
-20
-30
-40
-50
-60
-70
100 1000
Mhz
Diecast Shell Shielding Performance
Product Features
• Improves conformance to FCC DOC
#20780 shielding requirements
• No crimp ferrule tooling needed
• Kit consists of 1 front shell, 1 rear shell,
2 screws, 2 hex nuts, 2 mounting screws,
2 end brackets, 1 set of compression
inserts
Attenuation
Compression inserts (included with die cast zinc metal backshell)
Specifications
Attenuation: -50 dB @ 1000MHz
Temperature Range: -20º C to 80º C
Position Cable Diameter
9,15 4,83/8,89 (.190/.350)
25 4,83/11,68 (.190/.460)
37,50 7,62/17,27 (.300/.680)
Shell Part ABCDøE F
Size Layout Number ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005)
DE 9 980-2000-345 31,12 (1.225) 37,21 (1.465) 15,75 (.620) 15,75 (.620) 10,16 (.400) 24,99 (.984)
DA 15 980-2000-346 39,12 (1.540) 40,64 (1.600) 15,75 (.620) 15,75 (.620) 10,16 (.400) 33,32 (1.312)
DB 25 980-2000-347 53,09 (2.090) 39,37 (1.550) 17,53 (690) 15,75 (.620) 13,34 (.525) 47,17 (1.857)
DC 37 980-2000-348 69,34 (2.730) 45,72 (1.800) 21,95 (.864) 15,75 (.620) 18,44 (.726) 63,50 (2.500)
DD 50 980-2000-349 66,70 (2.626) 45,72 (1.800) 21,95 (.864) 18,54 (.730) 18,44 (.726) 61,11 (2.406)
#1 #2 #3 #4 #5 #6
Position O.D. I.D. O.D. I.D. O.D. I.D. O.D. I.D. O.D. I.D. O.D. I.D.
9,15 12,07 (.475) 8,13 (.320) 9,14 (.360) 8,00 (.315) 9,14 (.360) 6,48 (.255) 9,14 (.360) 7,24 (.285) 9,14 (.360) 5,33 (.210) ——
25 15,24 (.600) 11,43 (.450) 11,43 (.450) 10,41 (.410) 11.43 (.450) 9,40 (.370) 11.43 (.450) 7,62 (.300) 11.43 (.450) 5,84 (.230) ——
37.50 16,64 (.655) 14,48 (.570) 17,78 (.700) 15,75 (.620) 20,57 (.810) 16,51 (.650) 16,64 (.655) 12,70 (.500) 16,64 (.655) 10,80 (.425) 16,64 (.655) 8,89 (.350)
Materials and Finishes
Backshell Material: Zinc
Backshell Finish: Clear Zinc
Compression Inserts: PVC
Hardware Material: Steel
Hardware Finish: Clear Zinc
* Inserts may be supplied mirror image.
DCannon D-Subminiature Accessories
D sub:Layout 1 3/24/09 12:37 PM Page 4
DCannon D-Subminiature Accessories
5
www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Metal Backshell Straight Exit
The new Cannon Metal Backshells D*FM series for D-Subminiature Connectors offers protection from
magnetic and radio interferences to cable assemblies.
This backshell series is characterized by simple assembly and fit for ndustrial and telecom applications.
PPrroodduucctt FFeeaattuurreess::
•No crimp ferrule tooling needed
•Material: Zinc, blue chromated
•Unique metal filled plastic cable strain relief
guarantees 360° shielding
•RoHS compliant
•-40 - +120°C temperature range
•Corrosion resistant
SSiizzee 1155
AAtttteennuuaattiioonn ccuurrvvee
DEFME-101 DEFMX-101 Size 9 39,55mm [1.555inch] 31,3mm [1.232inch] 14,6mm [0.575inch] 25,0mm [0.984inch] 4 - 9mm
DAFME-101 DAFMX-101 Size 15 41,7mm [1.642inch] 39,3mm [1.547inch] 14,6mm [0.575inch] 33,3mm [1.311inch] 4 - 9mm
DBFME-101 DBFMX-101 Size 25 49,0mm [1.929inch] 53,5mm [2.106inch] 14,6mm [0.575inch] 47,0mm [1.850inch] 4 - 9mm
DCFME-101 DCFMX-101 Size 37 53,3mm [1.098inch] 69,7mm [2.744inch] 14,6mm [0.575inch] 63,5mm [2.500inch] 4 - 9mm
Part Description Part Description
With #4-40 UNC With M3 Shell ABCDCable
Jackscew Jackscrew Size Diameter
Kit consists of 1 front shell, 1 rear shell, 4 strain reliefs, 2 mounting crosshead screws, and 2 jack screws.
AAsssseemmbbllyy iinnssttrruuccttiioonnss SSiizzee 99,, 1155,, 2255,, 3377
Use two halves of strain relief
(different sizes can be mixed)
Strip cable 18mm and shape
cable to two pigtails
Attach the strain relief around
the cable
Bend cable shielding back on
outside of strain relief
Mount connector and cable into
the backshell
Assemble the other half
(screwing force: 100-120 Ncm)
Metal Backshell
D sub:Layout 1 3/26/09 7:52 AM Page 5
DCannon D-Subminiature Accessories
6www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Metal Backshell
Metal Backshell 45° Exit
The new Cannon Metal Backshells D*FM series for D-Subminiature Connectors offers protection from
magnetic and radio interferences to cable assemblies.
This backshell series is characterized by simple assembly and fit for Industrial and telecom applications.
PPrroodduucctt FFeeaattuurreess::
•No crimp ferrule tooling needed
•Material: Zinc, blue chromated
•Unique metal filled plastic cable strain relief
guarantees 360° shielding
•RoHS compliant
•-40 - +120°C temperature range
•Corrosion resistant
SSiizzee 1155
SSiizzee 5500
AAtttteennuuaattiioonn ccuurrvvee
DEFME-100 DEFMX-100 Size 9* 37,5mm [1.476inch] 35,5mm [1.398inch] 14,6mm [0.575inch] 4 - 9mm
DAFME-100 DAFMX-100 Size 15** 41,5mm [1.634inch] 39,5mm [1.555inch] 14,6mm [0.575inch] 33,3mm [1.311inch] 4 - 9mm
DBFME-100 DBFMX-100 Size 25** 41,5mm [1.634inch] 53,5mm [2.106inch] 14,5mm [0.571inch] 47,0mm [1.850inch] 4 - 9mm
DCFME-100 DCFMX-100 Size 37** 41,5mm [1.634inch] 70,0mm [2.756inch] 14,5mm [0.571inch] 63,5mm [2.500inch] 4 - 9mm
DDFME-100 DDFMX-100 Size 50*** 45,0mm [1.772inch] 67,5mm [2.657inch] 17,4mm [0.69inch] 61,0mm [2.402inch] 13-16mm
Part Description Part Description
With #4-40 UNC With M3 Shell ABCDCable
Jackscew Jackscrew Size Diameter
*Size 9 Backshell: Kit consists of 1 front shell, 1 rear shell, 4 strain reliefs, 2 mounting crosshead screws, 1 jack screw
**Size 15, 25, 37 Backshell: Kit consists of 1 front shell, 1 rear shell, 4 strain reliefs, 2 mounting crosshead screws, 2 jack screws
***Size 50 Backshell: Kit consists of 1 front shell, 1 rear shell, 1 cable clamp, 4 mounting crosshead screws, 2 jack screws
AAsssseemmbbllyy iinnssttrruuccttiioonnss SSiizzee 99,, 1155,, 2255,, 3377
Use two halves of strain relief
(different sizes can be mixed)
Strip cable 18mm and shape
cable to two pigtails
Attach the strain relief around
the cable
Bend cable shielding back on
outside of strain relief
Mount connector and cable into
the backshell
Assemble the other half
(screwing force: 100-120 Ncm)
D sub:Layout 1 4/1/09 10:23 AM Page 6
DCannon D-Subminiature Accessories
7
www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Metal Backshell
C
A
E
CABLE ENTRY
IN SHELL
CABLE ENTRY
IN SHELL
H MAX.
G
D MAX.
0,38 ± 0,13
(.015 ± .005)
3,45 ± 0,13
(.136 ± .005)
TWO MTG. HOLES
B
F
+ +
0,38 ± 0,13
(.015 ± .005)
F
G
D MAX.
3,05 ± ,013
(.120 ± .005) DIA.
TWO MTG. HOLES
A
C
E
BCABLE ENTRY
Metal Backshell
Shell Part Mil Spec ABCDEFGH
Size Layout Number Part Number* ±0,38 (.015) ±0,572 (.0225) ±0,38 (.015) max. ±0,38 (.015) ±0,38 (.015) ±0,38 (.015) max.
DE 9 DE24657 M85049/48-1-1F 30,56 (1.203) 12,484 (.4915) 24,99 (.984) 14,68 (.578) 9,53 (.375) 9,53 (.375) 19,05 (.750) 31,75 (1.250)
DA 15 DA24658 M85049/48-1-2F 38,89 (1.531) 12,484 (.4915) 33,32 (1.312) 14,68 (.578) 18,11 (.713) 7.93 (.312) 19,05 (.750) 31,75 (1.250)
DB 25 DB24659 M85049/48-1-3F 52,78 (2.078) 12,484 (.4915) 47,04 (1.852) 14,68 (.578) 25,40 (1.000) 7.93 (.312) 25,40 (1.000) 39,70 (1.563)
DC 37 DC24660 M85049/48-1-4F 69,04 (2.718) 12,484 (.4915) 63,50 (2.500) 14,68 (.578) 34,93 (1.375) 7.93 (.312) 25,40 (1.000) 39,70 (1.563)
DD 50 DD24661 M85049/48-1-5F 66,68 (2.625) 15,253 (.6005) 61,11 (2.406) 17,45 (.578) 35,71 (1.406) 10,31 (.406) 28,57 (1.125) 42,88 (1.688)
* Parts ordered with no suffix or “Z” suffix will be substituted with “F” suffix.
Shell Part Mil Spec ABCDEFG
Size Layout Number Part Number* ±0,38 (.015) ±0,572 (.0225) ±0,38 (.015) max. ±0,38 (.015) ±0,38 (.015) ±0,76 (.030)
DE 9 DE44994 M85049/48-2-1F 30,68 (1.208) 12,70 (.500) 24,99 (.984) 10,31 (.406) 16,79 (.661) 3,18 (.125) 26,18 (1.031)
DA 15 DA20961 M85049/48-2-2F 38,89 (1.531) 12,70 (.500) 33,33 (1.312) 10,31 (.406) 24,99 (.984) 3,18 (.125) 26,18 (1.031)
DB 25 DB20962 M85049/48-2-3F 52,78 (2.078) 12,70 (.500) 47,04 (1.852) 15,06 (.593) 38,48 (1.515) 4,75 (.187) 26,98 (1.062)
DC 37 DC20963 M85049/48-2-4F 69,04 (2.718) 12,70 (.500) 63,50 (2.500) 18,23 (.718) 55,14 (2.171) 6,35 (.250) 26,98 (1.062)
DD 50 DD20964 M85049/48-2-5F 66,68 (2.625) 15,47 (.609) 61,11 (2.406) 20,62 (.812) 53,16 (2.093) 7,92 (.312) 26,98 (1.062)
* Parts ordered with no suffix or “Z” suffix will be substituted with “F” suffix.
Metal Backshells provide strain relief.
Various profiles available for different cable rout-
ing requirements.
• Kit consists of 1 shell, 2 cable clamps,
2 screws, 2 hex nuts.
Deep Straight Clamp
• Kit consists of 1 shell, 2 cable clamps,
2 screws, 2 hex nuts.
Round Cable Clamp
Materials and Finishes
Backshell Material: Low Carbon Steel or Brass
Backshell Finish: Chromate over Cadmium (Mil Spec) or Zinc (RoHS)
Hardware Material: Steel
Product Features
Qualified to MIL-Spec M85049
Mil-Spec Parts (Brass) Brass
Shell RoHS Compliant Mil-Spec 50 µ in. Gold
Size Part Number Part Number Part Number over Copper
DE DE24657-29 M85049/48-1-6F DE24657-5 DE24657-16
DA DA24658-28 M85049/48-1-7F DA24658-2 DA24658-15
DB DB24659-27 M85049/48-1-8F DB24659-2 DB24659-15
DC DC24660-27 M85049/48-1-9F DC24660-11 DC24660-16
DD DD24661-27 M85049/48-1-10F DD24661-4 DD24661-13
Mil-Spec Parts (Brass) Brass
Shell RoHS Compliant Mil-Spec 50 µ in. Gold
Size Part Number Part Number Part Number over Copper
DE DE44994-14 M85049/48-2-6F DE44994-3 DE44994-2
DA DA20961-26 M85049/48-2-7F DA20961-3 DA20961-16
DB DB20962-30 M85049/48-2-8F DB20962-8 DB20962-18
DC DC20963-27 M85049/48-2-9F DC20963-8 DC20963-17
DD DD20964-32 M85049/48-2-10F DD20964-8 DD20964-19
D sub:Layout 1 3/24/09 12:37 PM Page 7
DCannon D-Subminiature Accessories
8www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
3,05 ± 0,13 (.120 ± .005) DIA.
TWO MTG. HOLES
F
(TYP.)
A
CB
E
CABLE
ENTRY
0,38 ± 0,13
(.015 ± .005)
G
12,30 ± 0,38
(.484 ± .015)
B
A
C
#4-40
NC-2B THD.
TWO MTG. HOLES
E
CABLE ENTRY
F
CABLE
ENTRY
2,77 ± 0,25
(.109 ± .010)
G
H
Short Straight Clamp
• Kit consists of 1 shell, 2 or 3 screws,
2 or 3 hex nuts
No. of
Shell Part Mil Spec Cable Locking ABCEFG
Size Layout Number Part Number* Screws Included ±0,38 (.015) ±0,38 (.015) ±0,13 (.005) ±0,38 (.015) ±0,38 (.015) ±0,98 (.035)
DA 15 DA19678-1 M85049/48-3-2F 2 38,88 (1.531) 12,70 (.500) 33,33 (1.312) 7,51 (.296) 7.93 (.312) 16,36 (.644)
DB 25 DB19678-2 M85049/48-3-3F 2 52,78 (2.078) 12,70 (.500)) 47,04 (1.852) 7,51 (.296) 20,22 (.796) 16,36 (.644)
DC 37 DC19678-3 M85049/48-3-4F 3 69,04 (2.718) 12,70 (.500) 63,50 (2.500) 7,51 (.296) 17,45 (.687) 16,36 (.644)
DD 50 DD19678-4 M85049/48-3-5F 3 66,68 (2.625) 15,47 (.690) 61,11 (2.406) 9,91 (.390) 17,45 (.687) 17,63 (.694)
* Parts ordered with no suffix or “Z” suffix will be substituted with “F” suffix.
90º Entry
• Kit consists of 1 shell, 1 cable clamp, 1
screw,
1 nut, 2 rivnuts (assembled)
Shell Part Mil Spec ABCEFGH
Size Layout Number Part Number* ±0,38 (.015) ±0,38 (.015) ±0,13 (.005) ±0,38 (.015) ±0,38 (.015) ±0,98 (.035)
DE 9 DE19977-5 M85049/50-1F 30,56 (1.203) 18,24 (.718) 24,99 (.984) 11,10 (.437) 11,10 (.437) 11,89 (.468) 7,14 (.281)
DA 15 DA19977-1 M85049/50-2F 38,89 (1.531) 12,70 (.500) 33,33 (1.312) 11,10 (.437) 11,10 (.437) 11,89 (.468) 7,14 (.281)
DB 25 DB19977-2 M85049/50-3F 52,78 (2.078) 12,70 (.500)) 47,04 (1.852) 11,10 (.437) 15,88 (.625) 11,89 (.468) 7,14 (.281)
DC 37 DC19977-3 M85049/50-4F 69,04 (2.718) 12,70 (.500) 63,50 (2.500) 11,10 (.437) 20,63 (.812) 11,89 (.468) 7,14 (.281)
DD 50 DD19977-4 M85049/50-5F 66,68 (2.625) 15,47 (.690) 61,11 (2.406) 14,28 (.562) 23,01 (.906) 13,47 (.531) 8,71 (.343)
* Parts ordered with no suffix or “Z” suffix will be substituted with “F” suffix.
Mil-Spec Parts (Brass) Brass
Shell RoHS Compliant Mil-Spec 50 µ in. Gold
Size Part Number Part Number Part Number over Copper
DA DA19678-212 M85049/48-3-7F DA19678-38 DA19678-167
DB DB19678-213 M85049/48-3-8F DB19678-53 DA19678-168
DC DC19678-214 M85049/48-3-9F DC19678-85 DA19678-138
DD DD19678-214 M85049/48-3-10F DD19678-55 DA19678-161
Mil-Spec Parts (Brass) Brass
Shell RoHS Compliant Mil-Spec 50 µ in. Gold
Size Part Number Part Number Part Number over Copper
DE DE19977-72 M85049/50-6F DE19977-20 DE19977-47
DA DA19977-68 M85049/50-7F DA19977-6 DE19977-40
DB DB19977-69 M85049/50-8F DB19977-17 DE19977-43
DC DC19977-70 M85049/50-9F DC19977-18 DE19977-45
DD DC19977-71 M85049/50-10F DD19977-19 DE19977-44
Metal Backshell
D sub:Layout 1 3/24/09 12:37 PM Page 8
DCannon D-Subminiature Accessories
9
www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
CABLE
CLAMP CABLE
GROUNDING
TANG
16,99±0,30
(.669±.012)
C
B
D
E
ØH
MAX
A
D
E
Snap-Together Metalized Plastic
Metalized plastic backshells reduce EMI/RFI emis-
sions. Metalized plastic provides a light weight solu-
tion. Includes integral strain relieving cable clamp.
dB
kHz MHz MHz
MHz
Product Features
• Improves conformance to FCC DOC #20780
shielding requirements
• No crimp ferrule tooling needed
• Quick and simple assembly using snap-
together design feature
• Non-metalized, non-shielded versions available
AAtttteennuuaattiioonn CCuurrvvee
Straight Exit
50º Exit
Note: Cable grounding tang not available on DE size backshell.
Specifications
Attenuation: -49 dB @ 100MHz
Temperature Range: -20º C to 80º C
Shell Comptuer Cable Ribbon Cable ABCDEøH
Size Layout Shielded Non-Shielded Gray Non-Shielded Black Shielded Non-Shielded Gray ±0,15 (.006) ±0,30 (.012) ±0,30 (.012) ±0,30 (.120) ±0,20 (.008) Max.
DE 9 DE121073-154 DE121073-159 DE121073-259 DE121073-164 DE121073-169 24,95 (.982) 30,81 (1.213) 23,70 (.933) 16,00 (.630) 35,99 (1.417) 7,32 (.288A
DA 15 DA121073-150 DA121073-155 DA121073-255 DA121073-160 DA121073-165 33,30 (1.311) 39,09 (1.539) 31,80 (1.252) 16,00 (.630) 42,00 (1.654) 8,31 (.327)
DB 25 DB121073-151 DB121073-156 DB121073-256 DB121073-161 DB121073-166 47,00 (1.850) 53,01 (2.087) 45,01 (1.772) 16,00 (.630) 42,00 (1.654) 10,52 (.414)
DC 37 DC121073-152 DC121073-157 DC121073-257 DC121073-162 DC121073-167 63,45 (2.498) 69,29 (2.728) 60,30 (2.374) 16,00 (.630) 42,00 (1.654) 12,32 (.485 )
DD 50 DD121073-153 DD121073-158 DD121073-258 --61,10 (2.410) 66,90 (2.634) 58,30 (2.295) 19,00 (.748) 42,00 (1.654) 13,00 (.512)
Shell Shielded Non-Shielded BC DE Cable Diameter
Size Layout Part # Part # Gray ±0,30 (.012) ±0,30 (.012) ±0,30 (.012) ±0,20 (.008) Min. Max.
DE 9 DE121073-54 DE121073-59 35,99 (1.417) 22,00 (8.66) 16,00 (.630) 35,99 (1.417) 3,51 (.138) 7,49 (.295)
DA 15 DA121073-50 DA121073-55 44,29 (1.744) 27,31 (1.075) 16,00 (.630) 42,01 (1.654) 6,50 (.256) 8,99 (.354)
DB 25 DB121073-51 DB121073-56 57,99 (2.283) 41,00 (1.614) 16,00 (.630) 42,01 (1.654) 6,50 (.256) 11,00 (.433)
DC 37 DC121073-52 DC121073-57 74,50 (2.933) 57,51 (2.264) 16,00 (.630) 42,01 (1.654) 6,50 (.256) 11,00 (.433)
DD 50 DD121073-53 DD121073-58 72,97 (2.873) 54.99 (2.165) 19,00 (.748) 42,01 (1.654) 8,99 (.354) 13,00 (.512)
Materials and Finishes
Material: Thermoplastic, UL 94V-0 rated
Finish: Nickel over Copper
• Kit consists of 1 front
shell, 1 rear shell, 1 cable
clamp, 2 screws
• Optional locking hardware
sold separately, see page 10
• Kit consists of 1 front shell,
1 rear shell, 1 cable clamp,
2 screws
• Optional locking hardware sold
separately, see page 5
Plastic Backshell
D sub:Layout 1 3/26/09 7:52 AM Page 9
DCannon D-Subminiature Accessories
10 www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Plastic Backshell
13,50 (.531)
4,50
(.177)
DIA.
9,00
(.354)
#4-40
Threads
6,00
(.236)
MIN.
19,00 (.748)
4,30
(.169) 9,00
(.354)
4,10
(.161)
DIA.
#4-40
Threads
50,00 (1.969)
4,30 (.169) 9,00 (.354)
6,00 (.236)
#4-40
THREADS
6,00
(.236)
MIN.
Locking Hardware for Snap -Together Plastic Backshell
5,00
(.197)
5,00
(.197)
1,81
(.075)
6,00
(.236)
4,60
(.189)
#4-40 UNC-2B
11,00
(.433)
6,00
(.236)
4,90 (.193)
3,00 (.118)
MIN
#4-40 UNC-2A
#4-40 UNC-2B 5,00
(.197)
(ACROSS FLATS)
Jackpost for In-Line Connections
Recessed Jackscrew Extended Jackscrew Thumbscrew
Rectangular Nut Jackp ost
Jackpost Assembly
Part Number: D121073-19
Material: Brass
Finish: Nickel
Quantity required
per connector: 2
Assembly consists of 1 rectangular nut,
1 jackpost, 1 # 4-40 lock washer.
Materials and Finishes
Part Number Material Finish Quantity Required
per Connector
250-8501-004 Brass Nickel 2
250-8501-009 (M3) ,250-8501-010 (#4-40) Brass Nickel 2
250-8501-013 Brass Nickel 2
Straight Exit - Metalized Plastic Low Cost
Shell Part ABCDø E F
Size Layout Number
DE 9 980-2000-350 30,91 (1.217) 39,29 (1.547) 16,26 (.640) 16,26 (.640) 10,16 (.400) 24,99 (.984)
DA 15 980-2000-351 39,24 (1.545) 38,23 (1.505) 16,26 (.640) 16,26 (.640) 10,16 (.400) 33,32 (1.312)
DB 25 980-2000-352 53,09 (2.090) 42,04 (1.655) 18,03 (.710) 16,26 (.640) 13,26 (.522) 47,17 (1.857)
DC 37 980-2000-353 69,44 (2.734) 46,48 (1.830) 23,01 (.906) 16,26 (.640) 18,44 (.726) 63,50 (2.500 )
DD 50 980-2000-354 67,18 (2.645) 47,12 (1.855) 23,88 (.940) 19,56 (.770) 18,44 (.726) 61,11 (2.406)
• Kit consists of 1 front shell, 1 rear shell,
1 cable clamp, 2 screws
50 POSITION IS MARKED
“CANNON” ONLY
B
A
ITT CANNON
C
D
ØE
F
Materials and Finishes: Thermoplastic, UL 94V-0 rated, Nickel plated
D sub:Layout 1 3/24/09 12:37 PM Page 10
DCannon D-Subminiature Accessories
11
www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
C
B DIA. MAX.
CABLE ENTRY
39,50
(1.555).
D
42,50
(1.673).
ITT CANNON
A
C
CLAMP,
THERMOPLASTIC
CLAMP,
METAL
E
48,00
(1.890)
D
16,21
(.638)
∅
Snap -Together Universal
• 2-piece snap-together design for quick
assembly.
• Customer furnishes tie-wrap.
Materials and Finishes
Material: Black Thermoplastic,
UL 94V-0 rated
• Low cost
• Easy to assemble
• Mounting hardware included
• 2 thumbscrews, 2 cable clamps
Materials and Finishes
Backshell Material: Polypropylene
Hardware Material: Steel
Hardware Finish: Black Nickel
Shell Part øB CD
Size Layout Number max. ±0,20 (.008) ±0,20 (.008)
DE 9 DE115339-20 7,01 (.276) 17,00 (.669) 19,51 (.768)
DA 15 DA115339-21 9,60 (.378) 17,00 (.669) 27,79 (1.094)
DB 25 DB115339-22 11,61 (.457) 17,00 (.669) 41,61 (1.638)
DC 37 DC115339-23 13,00 (.512) 17,00 (.669) 59,99 (2.283)
DD 50 DD115339-24 16,00 (.630) 19,81 (.780) 52,32 (2.060)
Note: Part Numbers above replace the following part number series: DE110963-1 to DD110963-5
Shell Part ø D
Size Layout Number ACmax. E
DE 9 DEBS-9 35,20 (1.386) 24,99 (.984) 5,69 (.224) 27,51 (1.083)
DA 15 DABS-15 43,31 (1.705) 33,33 (1.312) 5,69 (.224) 31,19 (1.228)
DB 25 DBBS-25 57,20 (2.252) 47,04 (1.852) 6,50 (.256) 38,30 (1.508)
DC 37 DCBS-37 72,00 (2.83) 62,00 (2.44) 7,80 (.307) 43,08 (1.69)
DD 50 DDBS-50 73,70 (2.90) 63,70 (2.50) 8,20 (.322) 48,04 (1.89)
One-Piece Snap-Together
Plastic Backshell
D sub:Layout 1 3/24/09 12:37 PM Page 11
DCannon D-Subminiature Accessories
12 www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Plastic Backshell
TWO SCREWS 4-24 X 5/16 long
SELF-TAPPING
B
CACable Entry
D
F
Cable Entry
ø E
G
Cable Entry
A
C
B
D
J
K
Cable Entry
ø H
Cable Entry
One-Piece Plastic
Straight Exit
90º Exit
• Kit consists of 1 shell, 1 cable clamp,
1 set screw
• Mounting hardware included
• 2 screws #4-24 x 5/16 long self tapping
• Accommodates spring latches
Materials and Finishes
Material: Black Thermoplastic,
UL 94V-0 rated
Hardware Material: Steel
Hardware Finish: Chromate over Zinc
• Kit consists of 1 shell, 1 cable clamp,
1 set screw
• Mounting hardware included
• 2 screws #4-24 x 5/16 long self tapping
Materials and Finishes
Material: Black Thermoplastic,
UL 94V-0 rated
Hardware Material: Steel
Hardware Finish: Chromate over Zinc
Shell Part ABCDøE FG
Size Layout Number ±0,38 (.015) ±0,38 (.015) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,25 (.010) ±0,25 (.010)
DE 9 DE51218 30,94 (1.218) 25,40 (1.000) 24,99 (.984) 12,70 (.500) 7,14 (.281) ——
DA 15 DA51210 39,27 (1.546) 25,40 (1.000) 33,33 (1.312) 12,70 (.500) 9,14 (.360) ——
DB 25 DB51212 53,16 (2.093) 31,75 (1.250) 47,04 (1.852) 12,70 (.500) — 12,52 (.493) 9.15 (.360)
DC 37 DC51214 69,44 (2.734) 38,10 (1.500) 63,50 (2.500) 12,70 (.500) — 17,63 (.694 ) 9.15 (.360)
DD 50 DD51216 67,06 (2.640) 38,10 (1.500) 61,11 (2.406) 15,47 (.690) — 18,64 (.734) 11,89 (.468)
Shell Part ABCDøH JK
Size Layout Number ±0,38 (.015) ±0,38 (.015) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,25 (.010) ±0,25 (.010)
DE 9 DE51219 37,95 (1.494) 25,40 (1.000) 24,99 (.984) 12,70 (.500) 7,14 (.281) ——
DA 15 DA51211 46,28 (1.822) 25,40 (1.000) 33,33 (1.312) 12,70 (.500) 9,14 (.360) ——
DB 25 DB51213 60,15 (2.368) 31,75 (1.250) 47,04 (1.852) 12,70 (.500) — 12,52 (.493) 9.15 (.360)
DC 37 DC51215 76,43 (3.009) 38,10 (1.500) 63,50 (2.500) 12,70 (.500) — 17,63 (.694 ) 9.15 (.360)
DD 50 DD51217 74,04 (2.915) 38,10 (1.500) 61,11 (2.406) 15,47 (.690) — 18,64 (.734) 11,89 (.468)
D sub:Layout 1 3/24/09 12:37 PM Page 12
DCannon D-Subminiature Accessories
13
www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Locking Hardware
NUT
MOUNTING
PANEL
HEX NUT
LOCK
WASHER
WASHER
NUT
CLIP WITH
THREAD
SCREW
MOUNTING PANEL
D SUBMINATURE
CONNECTOR
PIN OR SOCKET
HEX NUT
LOCK
WASHER
CLIP WITH
THREAD
SCREW
D SUBMINATURE
CONNECTOR
PIN OR SOCKET
D SUBMINATURE
CONNECTOR
PIN OR SOCKET
WASHER
C
CLIP GAP CLIP
B
SCREW
#4-40 UNC-2A THD
A
Screw Lock Assemblies
• Kit consists of 1 screw and 1 clip
• Order 2 per connector
• Similar to M24308/25
ITT offers the largest variety of locking and
latching hardware. Refer to the accessories
selection guide on pages 2-3 for use with
Cannon backshells.
Product Features
• Ensures positive mating
• Provides locking and latching for high
vibration applications
Materials and Finishes
Material: Steel
Finish: Trivalent Chromate over Zinc
Male Screw Lock
Front Panel Mount Rear Panel Mount
Shell each 2 each ABCRoHS Compliant RoHS Compliant
Size P/N P/N ±0,38(.015) ±0,2 (.010) ±0,13 (.005) P/N each P/N 2 each
DE, DA, DB, DC D20419 D20419-119 14,10 (.555) 6,35 (.250) 1,22 (.048) D20419-211 D20419-218
DE, DA, DB, DC D20419-18 D20419-121 14,10 (.555) 7,14 (.281) 1,70 (.067) D20419-212 D20419-219
DE, DA, DB, DC D20419-21 D20419-122 14,10 (.555) 7,14 (.281) 2,34 (.092) D20419-213 D20419-220
DE, DA, DB, DC D20419-104 D20419-216 14,10 (.555) 7,92 (.312) 2,34 (.092) D20419-214 D20419-221
DD D20420 D20420-097 16,66 (.656) 6,35 (.250) 1,22 (.048) D20420-157 D20420-163
DD D20420-13 D20420-099 16,66 (.656) 7,14 (.281) 1,70 (.067) D20420-158 D20420-164
DD D20420-15 D20420-100 16,66 (.656) 7,14 (.281) 2,34 (.092) D20420-159 D20420-165
DD D20420-86 D20420-162 16,66 (.656) 7,92 (.312) 2,34 (.092) D20420-160 D20420-166
D sub:Layout 1 3/26/09 7:52 AM Page 13
DCannon D-Subminiature Accessories
14 www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Locking Hardware
4,78 ± 0,38
(.188 ± .015)
Hex across Flats
#4-40 NC-2B THD.
6,35 (.250) APPROX.
REMOVE ONE WASHER
FOR EACH 0,76 (.030)
OF PANEL THICKNESS
WHEN REAR MOUNTING
1,52 (0.60) MAX. PANEL
REAR FLANGE (REF.)
#4-40 NC-2A THD
A
4,78 ± 0,38
(.188 ± .015)
5,00 (.197) HEX
(ACROSS FLATS)
3,50 (.138)
MIN
4,50
(.177)
5,75
(.226)
THD A THD B
3,50
(.138)
MIN
• Kit consists of 1 nut, 3 washer, 1 lock
washer, 1 hex nut.
• Order 2 per connector.
Female Screw Lock
Front Panel Mount Rear Panel Mount
NOTE: (1) A 6 inch/pound (female) and 4 inch/pound (male) maximum torque during assembly is recommended on steel screw
lock assemblies. (2) A third flat washer is supplied for front panel mounting of tab shell connectors.
Material: Steel
Finish: Chromate over Cadmium (Mil Spec)
or Zinc (RoHS)
Yellow Chromate Over Cadmium Chromate Over Zinc RoHS Compliant A Mil-Spec
each Kit of 2 each Kit of 2 each Part Number ± 0,38 (.015) Part Number
D20418-2 D20418-82 D20418-128 D20418-134 7,92 (.312) M24308/26-1F
D20418-50 D20418-131 - D20418-135 12,70 (.500) -
D20418-39 D20418-83 D20418-129 D20418-136 15,88 (.625) M24308/26-2F
D20418-74 D20418-132 - D20418-137 19,05 (.750) -
Part Thread Type
Number THD A THD B
D121073-39 # 4-40 UNC-2B # 4-40 UNC-2A
D112041 * # 4-40 UNC-2B # 4-40 UNC-2A
D121073-42 M3 M3
* without lock washer
Screw Locks for Connectors with Integral Threaded Inserts
• Kit consists of 1 jackpost, 1 lock washer.
• Order 2 per connector.
.120
.116
.192
.182
A
Loose Spacer
Dim A
Part Number: 253-0343-000 (D*M Style) 5.84
±
.08 (.230
±.
003)
Part Number: 253-0343-011 (D*MA Style) 9.40
±
.13 (.370
±.
005)
Material: Aluminum
Finish: Chromate over Cadmium
D sub:Layout 1 4/1/09 10:23 AM Page 14
DCannon D-Subminiature Accessories
15
www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Locking Hardware
LOCK
WASHER
SLIDE
LATCH
#4-40
SCREW
#4-40
POST
FLAT
WASHERS
LOCK
WASHER
#4-40
HEX. NUT
HEX NUT
2 SCREWS
#4-40 NC-2A THREAD
2,84 (. 112)
3,66 ± 0,38
(.144 ± .015)
2,36 (.093)
TRAVEL REF.
A
C
B
RETAINER
SLIDING LOCK
Slide Lock Assemblies
ITT offers the largest variety of locking and
latching hardware. Refer to the accessories
selection guide on pages 2-3 for use with
Cannon backshells.
Product Features
• Ensures positive mating
• Provides locking and latching for high
vibration applications
• Kit consists of 1 sliding lock plate, 2 mounting
screws, 2 lock washer, 2 hex nuts
• Order 1 kit per connector
Sliding Lock Retainer Assembly
Finish/
Descriptions Material Treatment
Sliding Lock
Plate Stainless Steel Passivated
Screw,
Mounting Steel
Washer Lock Steel
Nut, Hex Steel
Shell Part ABC
Size Layout Number ± 0,38 (.015) ± 0,38 (.015) ± 0,13 (.005)
DE 9 DE51224-1 35,05 (1.380) 12,70 (.500) 25,00 (.984)
DA 15 DA51220-1 43,70 (1.720) 12,70 (.500) 33,32 (1.312)
DB 25 DB51221-1 57,40 (2.260) 12,70 (.500) 47,04 (1.852)
DC 37 DC51222-1 73,86 (2.908) 12,70 (.500) 63,50 (2.500)
DD 50 DD51223-1 71,47 (2.814) 15,47 (.609) 61,11 (2.406)
Trivalent
Chromate over
Zinc
SPACER
WASHER LOCK WASHER
#4-40
HEX NUT
HEX
2,59 (.102)
± 0,13 (.005) 10,57 (.416)
± 0,25 (.010)
4,60
(.180)
Slide Lock Post Assemblies
• Consists of 1 post, 2 washers, 1 lock washer,
and 1 hex nut.1
• Order 2 per connector.2
NOTE: When rear-mounting connector to a 1/16”
panel, delete the second spacer washer.
Part Number: D53018 D53018-11 Material: Steel, Finish: Chromate/Zinc
D53018-14 D53018-20 Material: Stainless Steel, Finish: Passivated
Each1,2 Kit of 2 each
D sub:Layout 1 3/26/09 7:52 AM Page 15
DCannon D-Subminiature Accessories
16 www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Locking Hardware
15,37 ± 0,64
(.605 ± .025)
#4-40 THD. x 7,92 (.312)
LONG SCREW
#4-40 HEX. NUT
2,41 (.095) -
1,52 (.060)
#4-40
SCREW
LATCH PLATE
CONNECTOR
EITHER PIN OR SOCKET
LOCK WASHER
#4-40
HEX NUT
A
B
BA
15,57 ± 0,64
(.613 ± .025)
#4-40 THD. x 7,92 (.312)
LONG SCREW
2,41 (.095)
1,52 (.060) #4-40 HEX. NUT
C
#4-40
SCREW
SPRING LATCH
MOUNTING BRACKET
CONNECTOR
EITHER PIN OR SOCKET
LOCK WASHER
#4-40
HEX. NUT
SPRING LATCH
Unlocked Locked
Spring Latch Plate Assembly
Spring Latch Assembly
Spring Latch Assemblies
Materials and Finishes
Material: Stainless Steel
Treatment: Passivated
ITT offers the largest variety of locking and
latching hardware. Refer to the accessories
selection guide on pages 2-3 for use with
Cannon backshells.
• Kit consists of 1 plate, 1 screw,
1 lock washer,1 hex nut.
• Order 2 kits per connector.
• Kit consists of 1 spring, 1 screw, 1 bracket,
1 lock washer, 1 hex nut.
• Order 2 kits per connector. Front panel mounting.
Product Features
• Low Cost
• Minimizes field connection time
• Positive lock between connectors
• Packaged 2 kits per bag
Shell Part ABPart Number
Size Layout Number ± 0,38 (.015) ± 0,38 (.015) Kit of 2 each
DE, DA, DB, DC 9,15, 25, 37 D110278 12,42 (.489) 14,35 (.565) D110278-4
DD 50 D110280 15,47 (.609) 17,09 (.673) D110280-3
Shell Part ABCPart Number
Size Layout Number ± 0,38 (.015) ± 0,38 (.015) ± 0,51 (.020) Kit of 2 each
DE, DA, DB, DC 9,15, 25, 37 D110277 12,42 (.489) 14,35 (.565) 18,59 (.732) D110277-2
DD 50 D110279 15,47 (.609) 17,09 (.673) 18,59 (.732) D110279-3
D110277-4 Rear panel mount version also available
D sub:Layout 1 3/24/09 12:37 PM Page 16
DCannon D-Subminiature Accessories
17
www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
4,75 (.187) HEX
(ACROSS FLATS)
CONNECTOR
ASSY #4-40 UNC THREAD
5,84 (.230) ± 0,13 (.005)
14,10 (.555)
± 0,13 (.005)
5,59 (.220) MIN.
PERFECT THD.
1,14 (.045)
± 0,13 (.005)
PANEL 3,18 (.125) MAX.
LOCK WASHER
HEX NUT
#4-40 UNC THREAD
#4-40 UNC
THREAD 5,59 (.220) DIA.
MAX.
0,64 (.025)
± 0,13 (.005)
4,57 (.180)
MAX.
16,26 (.640)
MAX.
1,73 (.068)
MAX.
9,40 (.370)
MAX.
5,59 (.220)
DIA. MAX.
0,89 (.035)
± 0,13 (.005)
Jackscrew/Jackpost Assemblies
Part Number: D110550
Materials and Finishes
Material: Stainless Steel
Treatment: Passivated
• Kit consists of 2 studs, 2 heads,
1 tube retaining compound (US only)
• Order one kit per connector
Part Number: D110551
Materials and Finishes
Material: Stainless Steel
Treatment: Passivated
• Kit consists of 2 posts, 2 hex nuts, 2 lock washer
• Order one kit per connector
Jackpost Assembly
Jackpost Assembly
Jackscrew Assembly
Jackscrew Assembly
ITT offers the largest variety of locking and
latching hardware. Refer to the accessories
selection guide on pages 2-3 for use with
Cannon backshells.
NOTE: Jack post is not compatible with rear-panel mount connectors.
FEMALE POST
STUD, JACKSCREW
# 2-56 UNC THD
Ø 3,05 (.120)
#4 HEX NUT
WASHER,
#4 LOCK
# 4-40 UNC-2A THD
# 4-40 UNC-2B THD
# 4-40 UNC THD
HEAD, JACKSCREW
RETAINING
COMPOUND
Ø 3,05 (.120)
Locking Hardware
D sub:Layout 1 3/24/09 12:37 PM Page 17
DCannon D-Subminiature Accessories
18 www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Guide Pin Plate
+
+
++
+
MOUNTING
PANEL
9,60 (.378)
MAX
1,57
(.062)
6,35 (.250) MAX.
SOLDER POT
EXTENSION
A
B
F
E
F
G
C
D
4,04 (.159)
DIA. MIN.
2 PLACES
MOUNTING HOLE
#4.40 UNC-2B THREAD
(SCREW SUPPORT)
2 PLACES
1,60 (.063) ±
0,41 ± (.016)
RAD.
4 PLACES
+ ++
+
+
4,22 ± 0,05
(.166 ± .002)
DIA.
2 PLACES
B
E
F
J
H
D
F
K
RADIUS
3,66 ± 0,13
(.144 ± .005)
DIA.
2 PLACES
Shell Part ABCDEFGHJK
Size Layout Number ±0,41 (.016) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,41 (.016) ±0,41 (.016) ±0,41 (.016) ±0,41 (.016)
DE 9 DE111920 49,61 (1.953) 40,08 (1.578) 25,00 (.986) 18,65 (.734) 15,27 (.601) 9,52 (.375) 25,40 (1.000) 30,58 (1.204) 12,29 (.484) 6,15 (.242)
DA 15 DA22214 57,96 (2.282) 48,41 (1.906) 33,32 (1.312) 22,81 (.898) 19,43 (.765) 9,52 (.375) 25,40 (1.000) 38,91 (1.532) 12,29 (.484) 6,15 (.242)
DB 25 DB22254 71,63 (2.820) 62,13 (2.446) 47,04 (1.852) 29,67 (1.168) 26,29 (1.035) 9,52 (.375) 25,40 (1.000) 51,21 (2.016) 11,91 (.469) 5,94 (.234)
DC 37 DC22071 88,11 (3.469) 78,59 (3.094) 63,50 (2.500) 37,90 (1.492) 34,52 (1.359) 9,52 (.375) 25,40 (1.000) 67,49 (2.657) 11,91 (.469) 5,94 (.234)
DD 50 DD21961 85,72 (3.375) 76,20 (3.000) 61,11 (2.406) 36,50 (1.437) 33,32 (1.312) 11,10 (.437) 28,58 (1.125) 65,10 (2.563) 14,30 (.563) 7,16 (.282)
Guide Pin Plate
Female
Recommended Panel Cutout
Plate and Hardware Material: Steel
Plate and Hardware Finish: Chromate over Zinc
• Useful in blind mate applications.
• Kit consists of 1 plate, 2 screws.
• Guide pin inserts for Size 8 cavities for
Combo D®connectors also available. Refer to
Combo D Catalog.
D sub:Layout 1 3/24/09 12:37 PM Page 18
DCannon D-Subminiature Accessories
19
www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Shell Part ABCDEFGHJK
Size Layout Number ±0,41 (.016) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,41 (.016) ±0,41 (.016) ±0,41 (.016) ±0,41 (.016)
DE 9 DE111919 49,61 (1.953) 40,08 (1.578) 33,91 (1.335) 18,65 (.734) 25,40 (1.000) 19,05 (.750) 25,00 (.984) 12,29 (.484) 30,58 (1.204) 6,15 (.242)
DA 15 DA22213 57,96 (2.282) 48,41 (1.906) 42,24 (1.663) 22,81 (.898) 25,40 (1.000) 19,05 (.750) 33.32 (1.312) 12,29 (.484) 38,89 (1.531) 6,15 (.242)
DB 25 DB22255 71,63 (2.820) 62,13 (2.446) 55,96 (2.203) 29,67 (1.168) 25,40 (1.000) 19,05 (.750) 47,04 (1.852) 12,29 (.484) 51,99 (2.047) 6,15 (.242)
DC 37 DC22070 88,11 (3.469) 78,59 (3.094) 72,42 (2.851) 37,90 (1.492) 25,40 (1.000) 19,05 (.750) 63,50 (2.500) 12,29 (.484) 68,25 (2.687) 6,15 (.242)
DD 50 DD21962 85,72 (3.375) 76,20 (3.000) 69,82 (2.749) 36,50 (1.437) 28,58 (1.125) 22,20 (.874) 61,11 (2.406) 15,06 (.593) 66,93 (2.635) 7,52 (.296)
4,78 ± 0,30
(.188 ± 0.12)
6,35 (.250) MAX
SOLDER POT
EXTENSION
4,01 (.158)
DIA. MAX.
1,57 (.062)
MAX.
4,06 (.160) REF
DIA MAX.
1,57 ± 0,13
(.062 ± .005)
8,71 ± 0,38
(.343 ± .015)
22,22 ± 0,76
(.875 ± .030)
4,06 ± 0,25
(.160 ± .010)
A
B
C
D
ITT CANNON
E
F
G
3,66 ± 0,13
(.144 ± .005)
2 PLACES
C
L
+ +
++
+
+3,66 ± 0,13 DIA.
(.144 ± .005)
2 PLACES
5,54 ± 0,13 DIA.
(.218 ± .005)
2 PLACES
K
RADIUS
B
C
D
J
HF
C
L
Recommended Panel Cutout
Guide Pin Plate
Male
Plate and Hardware Material: Steel
Plate and Hardware Finish: Chromate over Zinc
Guide Pin Material: Stainless Steel
• Useful in blind mate applications.
• Kit consists of 1 plate, 2 sems screws, 2 rivets,
2 guide pins, 2 washer
• Guide pin inserts for Size 8 cavities for Combo
D®connectors also available. Refer to Combo D
Catalog.
Guide Pin Plate
D sub:Layout 1 3/24/09 12:37 PM Page 19
DCannon D-Subminiature Accessories
20 www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Connector Saver
5,97 ± 0,25
(.235 ± .010)
CONTACT
(PIN)
SHELL
PIN FRONT
SHELL
SOCKET FRONT
CONTACT
(SOCKET)
6,17 ± 0,25
(.243 ± .010)
21,95 ± 0,51
(.864 ± .020)
A
B
C
2X 11˚
9˚
SPACER
High Reliability Connector Saver
Specifications
Materials and Finishes
NOTE: Hardware removed for clarity.
Shell Part ABC
Size Layout Number ± 0,40 (.015) ± 0,25 (.010) ± 0,25 (.010)
DE 9 DEBMAM9PS 30,81 (1.213) 24,99 (.984) 16,92 (.666)
DA 15 DABMAM15PS 39,14 (1.541) 33,32 (1.312) 25.25 (.994)
DB 50 DBBMAM25PS 53,04 (2.088) 47,04 (1.852) 38,96 (1.534)
DC 37 DCBMAM37PS 69,32 (2.729) 63,50 (2.500) 55,42 (2.182)
DD 50 DDBMAM50PS 66,93 (2.635) 61,11 (2.406) 52,81 (2.079)
Temperature: -55º C to 105º C
Current Rating: 7 A
Dielectric withstanding Voltage: 500 VAC at Sea Level
Description Material Finish
Shells Steel Yellow Chromate over Zinc
Insulator White Thermoplastic, UL 94V-0 —
Contacts Copper Alloy Gold Over Copper
Locking Hardware Stainless Steel Passivated
Engaging Face, Pin Side
D sub:Layout 1 3/24/09 12:37 PM Page 20
DCannon D-Subminiature Accessories
21
www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Polarizing Plates
Part Number AB
by Shell Size
DE 115398 1.208 (30.7) 0.629 (16)
DA 115398-1 1.535 (39,0) 0.629 (16)
DB 115398-2 2.082 (52,9) 0.629 (16)
DC 115398-3 2.726 (69,2) 0.629 (16)
DD 115398-3 2.630 (66,8) 0.749 (19)
Right Angle Brackets (Used with 90º Printed Circuit Connector D*M, D*, D*C,/D*U)
Shell Part ABCDEF
Size Number ± .015 ± .005 ± .010 ± .010 ± .010 ± .010
DE 015-0338-000 1.224 (31.1) .984 (24.0) .340 (8.63) .484 (12.3) 24.7 (6.27) .283 (7.2)
DA 015-0339-000 1.552 (39.4) 1.312 (33.3) .340 (8.63) .484 (12.3) 24.7 (6.27) .283 (7.2)
DB 015-0340-000 2.092 (53.1) 1.852 (47.0) .340 (8.63) .484 (12.3) 24.7 (6.27) .283 (7.2)
DC 015-0341-000 2.740 (69.0) 2,500 (63.5) .340 (8.63) .484 (12.3) 24.7 (6.27) .283 (7.2)
DD 015-0342-000 2.646 (67.2) 2.406 (61.1) .395 (10.0) .594 (15.1) .302 (7.67) .283 (7.2)
D*/D*M
Shell Part ABCDEF
Size Number ± .015 ± .005 ±.010 ± 010 ± .010 ± .010
DE 015-0348-000 1.224 (31.1) .984 (24.0) .340 (8.63) .484 (12.3) 24.7 (6.27) .283 (7.2)
DA 015-0349-000 1.552 (39.4) 1.312 (33.3) .340 (8.63) .484 (12.3) 24.7 (6.27) .283 (7.2)
DB 015-0350-000 2.092 (53.1) 1.852 (47.0) .340 (8.63) .484 (12.3) 24.7 (6.27) .283 (7.2)
DC 015-0351-000 2.740 (69.0) 2,500 (63.5) .340 (8.63) .484 (12.3) 24.7 (6.27) .283 (7.2)
DD 015-0352-000 2.646 (67.2) 2.406 (61.1) .395 (10.0) .594 (15.1) .302 (7.67) .283 (7.2)
D*C/D*U
Material: Black plastic, 94-V-O rated
AHG
F
E
D
CB
Polarizing
Keys
Position 1
2
3
4
5
6
7
8
9
10
Cut Key on
pin connector
Cut Key on socket
connector
Polarizing Scheme
Wire Hole Fillers (D*MA Series Only)
Part Number Insert Type
DMA 51236-1 Socket
DMA 51235-1 Pin
Material: Nylon
Pin
Socket
Insert this end first
From Terminal end of Connector
Miscellaneous
Material: Black Polyester, UL-94V-0 Rated
D sub:Layout 1 3/24/09 12:37 PM Page 21
DCannon D-Subminiature Accessories
22 www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
RAISED GATEMARK
R. TYP.
B
A
B
D
6,35 (.250)
C
1,02
.04 WALL TYP.
ITT CANNON
XX-XX-XX
10˚ TYP.
0,79 + 0,38 - 0.00
(.031 + .015 - .000)
B
A
ø 0,91 +_ 0,18
(.036 +_ .007)
DIA. TYP.
+ +
3,25 (.128) DIA.
4,70 (.185) 0,76 (.030)
15,20
(.600)
Potting Shell
I.D. ABCD
DE-59-20BA DE-59-20RC Socket 20,32 (.800) 11,43 (.450) 16,36 (.644) 7,59 (2.99)
DA-59-20BA DA-59-20RC Socket 28,45 (1.120) 11,68 (.460) 24,59 (.968) 7,62 (.300)
DB-59-20BA DB-59-20RC Socket 42,42 (1.670) 11,68 (.460) 38,25 (1.506) 7,49 (.295)
DC-59-20BA DC-59-20RC Socket 58,93 (2.320) 11,68 (.460) 54,81 (2.158) 7,37 (.290)
DD-59-20BA DD-59-20RC Socket 56,90 (2.240) 14,48 (.570) 53,11 (2.091) 10,41 (.410)
DE-60-20BA DE-60-20RC Pin 21,84 (.860) 12,95 (5.10) 17,78 (.700) 8,92 (.351)
DA-60-20BA DA-60-20RC Pin 30,48 (1.200) 12,95 (.510) 26,52 (1.044) 9,02 (.355)
DB-60-20BA DB-60-20RC PIn 44,20 (1.740) 13,46 (.530) 39,60 (1.559) 9,09 (.358)
DC-60-20BA DC-60-20RC Pin 60,71 (2.390) 13,46 (.530) 56,90 (2.240) 9,37 (.369)
DD-60-20BA DD-60-20RC Pin 58,17 (2.290) 16.00 (.630) 54,28 (2.137) 12.04 (.474)
Dust Cap
Interfacial Seal
Dust caps provide protection from moisture
and dust for unused I/O ports.
Product Features
• Dust Caps meet the static decay test
requirements of MIL-B- 81705C, Type II.
• Dust Caps have an integral flange for easy
application and removal
Interfacial seals provide moisture resistance at the
mating interface.
Product Features
• Other Interfacial Seals in the Combo D®
layouts are available upon request.
Materials and Finishes
Material: Polyethylene
Material: Silastic Sheet
Potting shells are molded with a thin flange 0,76
(.030) to permit the use of D Subminiature
locking devices.
Materials and Finishes
Material: Nylon
Color: Natural (white)
NOTE: C dim. applies at point of maximum Integral interface length. Drawing shown for Black Anti-static caps.
Dimensions shown are reference only.
Shell Size Layout Part Number AB
DE 9 DE53750 16,66 (.656) 8,41 (.331)
DA 15 DA53750-1 24,99 (.984) 8,41 (.331)
DB 25 DB53750-2 38,88 1.531) 8,41 (.331)
DC 37 DC53750-3 55,14 (2.171) 8,41 (.331)
DD 50 DD53750-4 52,78 (2.078) 11,10 (.437)
DC 21WA4 075-0354-003 55,14 (2.171) 8,41 (.331)
DE 15 273-0333-000 16,66 (.656) 8,41 (.331)
DA 26 273-0334-000 24,99 (.984) 8,41 (.331)
DB 44 273-0335-000 38,88 1.531) 8,41 (.331)
DC 62 273-0336-000 55,14 (2.171) 8,41 (.331)
DD 78 273-0337-000 52,78 (2.078) 11,10 (.437)
Shell Size Layout Part Number
DE 9 DE50904-1
DA 15 DA50905-1
DB 25 DB50906-1
DC 37 DC50907-1
DD 50 DD50908-1
Miscellaneous
Black Antistatic
(Surface Resistivity
<1x105ohm/sq)
(Surface Resistivity
105-1012 ohm/sq)
Red Caps
D sub:Layout 1 4/10/09 11:43 AM Page 22
DCannon D-Subminiature Accessories
23
www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Index
075-0354-003 Same 22
250-8501-004 Same 5
250-8501-009 Same 5
250-8501-010 Same 5
250-8501-013 Same 5
273-0333-000 Same 22
273-0334-000 Same 22
273-0335-000 Same 22
273-0336-000 Same 22
273-0337-000 Same 22
980-2000-345 Same 6
980-2000-346 Same 6
980-2000-347 Same 6
980-2000-348 Same 6
980-2000-350 Same 12
980-2000-351 Same 12
980-2000-352 Same 12
980-2000-353 Same 12
980-2000-354 Same 12
D110277 Same 16
D110278 Same 16
D110279 Same 16
D110280 Same 16
D110550 Same 17
D110551 Same 17
D121073-19 Same 5
D121073-39 Same 14
D121073-42 Same 14
D20418-2 D20418-134 14
D20418-39 D20418-136 14
D20418-50 D20418-135 14
D20418-74 D20418-137 14
D20419 D20419-211 13
D20419-104 D20419-214 13
D20419-18 D20419-212 13
D20419-21 D20419-213 13
D20420 D20420-157 13
D20420-13 D20420-158 13
D20420-15 D20420-159 13
D20420-86 D20420-160 13
D53018 Same 15
DA115339-21 Same 11
DA121073-150 Same 4
DA121073-50 Same 4
DA19678-1 DA19678-212 10
DA19977-1 DA19977-68 10
DA20961 DA20961-26 9
DA22213 Same 19
DA22214 Same 18
DA24658 DA24658-28 9
DA50905-1 Same 22
DA51210 Same 12
DA51211 Same 12
DA51220-1 Same 15
DA53750-1 Same 22
DA-59-20 Same 22
DA-60-20 Same 22
DABMA15PS Same 20
DABS-15 Same 11
DB115339-22 Same 9
DB121073-151 Same 4
DB121073-51 Same 4
DB19678-2 DB19678-213 10
DB19977-2 DB19977-69 9
DB20962 DB20962-30 10
DB22254 Same 18
DB22255 Same 19
DB24659 DB24659-27 9
DB50906-1 Same 22
DB51212 Same 12
DB51213 Same 12
DB51221-1 Same 15
DB53750-2 Same 22
DB-59-20 Same 22
DB-60-20 Same 22
DBBMA25PS Same 20
DBBS-25 Same 11
DC115339-23 Same 11
DC121073-152 Same 4
DC121073-52 Same 4
DC19678-3 DC19678-214 9
DC19977-3 DC19977-70 9
DC20963 DC20963-27 9
DC22070 Same 19
DC22071 Same 18
DC24660 Same 7
DC50907-1 Same 22
DC51214 Same 12
DC51215 Same 12
DC51222-1 Same 15
DC53750-3 Same 22
DC-59-20 Same 22
DC-60-20 Same 22
DCBMA37PS Same 20
DD115339-24 Same 11
DD121073-153 Same 4
DD121073-53 Same 4
DD19678-4 Same 10
DD19977-4 Same 10
DD20964 DD20964-32 9
DD21961 Same 18
DD21962 Same 19
DD24661 Same 9
DD50908-1 Same 22
DD51216 Same 12
DD51217 Same 12
DD51223-1 Same 15
DD53750-4 Same 22
DD-59-20 Same 22
DD-60-20 Same 22
DDBMA50PS Same 20
DE111919 Same 19
DE111920 Same 18
DE115339-20 Same 11
DE121073-154 Same 4
DE121073-54 Same 4
DE19977-5 DE19977-72 10
DE24657 DE24657-29 9
DE44994 DE44994-14 9
DE50904-1 Same 22
DE51218 Same 12
DE51219 Same 12
DE51224-1 Same 15
DE53750 Same 22
DE-59-20 Same 22
DE-60-20 Same 22
DEBMA9PS Same 20
DEBS-9 Same 11
Standard RoHS Page
Part # Part # #
StandardRoHS Page
Part # Part # #
StandardRoHS Page
Part # Part # #
D sub:Layout 1 3/24/09 12:37 PM Page 23
24 www.ittcannon.com
Product Safety and Warranty
11.. MMAATTEERRIIAALL CCOONNTTEENNTT AANNDD PPHHYYSSIICCAALL
FFOORRMM
Electrical connectors do not usually contain
hazardous materials. They contain conduct-
ing and non-conducting materials and can
be divided into two groups.
a) Printed circuit types and low cost audio
types which employ all plastic insulators and
casings.
b) Rugged, Fire Barrier and High Reliability
types with metal casings and either natural
rubber, synthetic rubber, plastic or glass
insulating materials. Contact materials vary
with type of connector and also application
and are usually manufactured from either:
Copper, copper alloys, nickel, alumel,
chromel or steel. In special applications,
other alloys may be specified.
2
2.
.
F
FI
IR
RE
E
C
CH
HA
AR
RA
AC
CT
TE
ER
RI
IS
ST
TI
IC
CS
S
A
AN
ND
D
E
EL
LE
EC
CT
TR
RI
IC
C
S
SH
HO
OC
CK
K
H
HA
AZ
ZA
AR
RD
D
TThheerree iiss nnoo ffiirree hhaazzaarrdd wwhheenn tthhee ccoonnnneecc--
ttoorr iiss ccoorrrreeccttllyy wwiirreedd aanndd uusseedd wwiitthhiinn tthhee
ssppeecciiffiieedd ppaarraammeetteerrss.. IInnccoorrrreecctt wwiirriinngg oorr
aasssseemmbbllyy ooff tthhee ccoonnnneeccttoorr oorr ccaarreelleessss uussee
ooff mmeettaall ttoooollss oorr ccoonndduuccttiivvee fflluuiiddss,, oorr
ttrraannssiitt ddaammaaggee ttoo aannyy ooff tthhee ccoommppoonneenntt
ppaarrttss mmaayy ccaauussee eelleeccttrriicc sshhoocckk oorr bbuurrnnss..
LLiivvee cciirrccuuiittss mmuusstt nnoott bbee bbrrookkeenn bbyy sseeppaa--
rraattiinngg mmaatteedd ccoonnnneeccttoorrss aass tthhiiss mmaayy
ccaauussee aarrcciinngg,, iioonniizzaattiioonn aanndd bbuurrnniinngg..Heat
dissipation is greater at maximum resistance
in a circuit. Hot spots may occur when resist-
ance is raised locally by damage, e.g. cracked
or deformed contacts, broken strands of
wire. Local overheating may also result from
the use of the incorrect application tools or
from poor quality soldering or slack screw
terminals. Overheating may occur if the rat-
ings in the product Data Sheet/Catalog are
exceeded and can cause breakdown of insu-
lation and hence electric shock. If heating is
allowed to continue it intensifies by further
increasing the local resistance through loss
of temper of spring contacts, formation of
oxide film on contacts and wires and leakage
currents through carbonization of insulation
and tracking paths. Fire can then result in
the presence of combustible materials and
this may release noxious fumes. Overheating
may not be visually apparent. Burns may
result from touching overheated compo-
nents.
33.. HHAANNDDLLIINNGG
Care must be taken to avoid damage
to any component parts of electrical connec-
tors during installation and use. Although
there are normally no sharp edges, care
must be taken when handling certain com-
ponents to avoid injury to fingers. Electrical
connectors may be damaged in transit to the
customers, and damage may result in cre-
ation of hazards. Products should therefore
be examined prior to installation/use and
rejected if found to be damaged.
44.. DDIISSPPOOSSAALL
Incineration of certain materials may release
noxious or even toxic fumes.
55.. AAPPPPLLIICCAATTIIOONN
Connectors with exposed contacts should
not be selected for use on the current supply
side of an electrical circuit, because an elec-
tric shock could result from touching
exposed contacts on an unmated connector.
Voltages in excess of 30 V ac or 42.5 V dc are
potentially hazardous and care should be
taken to ensure that such voltages cannot be
transmitted in any way to exposed metal
parts of the connector body. The connector
and wiring should be checked, before mak-
ing live, to have no damage to metal parts or
insulators, no solder blobs, loose strands,
conducting lubricants, swarf, or any other
undesired conducting particles. Circuit
resistance and continuity check should be
made to make certain that there are no high
resistance joints or spurious conducting
paths. Always use the correct application
tools as specified in the Data Sheet/Catalog.
Do not permit untrained personnel to wire,
assemble or tamper with connectors. For
operation voltage please see appropriate
national regulations.
IIMMPPOORRTTAANNTT GGEENNEERRAALL IINNFFOORRMMAATTIIOONN
((ii)) AAiirr aanndd ccrreeeeppaaggee ppaatthhss//OOppeerraattiinngg vvoolltt--
aaggee..The admissible operating voltages
depend on the individual applications and
the valid national and other applicable safe-
ty regulations.
For this reason the air and creepage path
data are only reference values. Observe
reduction of air and creepage paths due to
PC board and/or harnessing.
((iiii)) TTeemmppeerraattuurree
All information given are temperature limits.
The operation temperature depends on the
individual application.
((iiiiii)) OOtthheerr iimmppoorrttaanntt iinnffoorrmmaattiioonn
Cannon continuously endeavors to improve
their products. Therefore, Cannon products
may deviate from the description, technical
data and shape as shown in this catalog and
data sheets.
ITT Interconnect Solutions, a Division of ITT
Corporation manufactures the highest qual-
ity products available in the marketplace;
however these products are intended to be
used in accordance with the specifications in
this publication. Any use or application that
deviates from the stated operating specifica-
tions is not recommended and may be
unsafe. No information and data contained
in this publication shall be construed to cre-
ate any liability on the part of Cannon. Any
new issue of this publication shall automati-
cally invalidate and supersede any and all
previous issues.
PPrroodduucctt WWa
arrrraannttyy
A limited warranty applies to Cannon prod-
ucts. In general, except for obligations
assumed by Cannon under this warranty,
Cannon shall not be liable for any loss, dam-
age, cost of repairs, incidental or consequen-
tial damages of any kind, whether or not
based on express or implied warranty, con-
tract, negligence or strict liability arising in
connection with the design, manufacture,
sale, use or repair of the products. Product
availability, prices and delivery dates are
exclusively subject to our respective order
confirmation form; the same applies to
orders based on development samples deliv-
ered. Please refer to www.ittcannon.com
(General Terms of Sale) for the complete text
of Cannon’s applicable Terms and
Conditions, including Warranty.
This publication is not to be construed as an
offer. It is intended merely as an invitation to
make an offer. By this publication, Cannon
does not assume responsibility or any liabili-
ty for any patent infringements or other
rights of third parties which may result from
its use.
Reprinting this publication is generally per-
mitted, indicating the source. However,
Cannon's prior consent must be obtained in
all cases. “Engineered for life” is a registered
trademark of ITT Corporation ©2006. All
other trademarks or registered trademarks
are property of their respective owners. All
dates subject to change without notice.
Commodities in this catalog may be
controlled for export by the International
Traffic in Arms Regulations (ITAR) and Export
Administration Regulations (EAR) when
specifically designed modified, or configured
for articles controlled by the United States
Government.
D sub:Layout 1 3/24/09 12:37 PM Page 24
D
www.ittcannon.com/micro
D-Subminiature Connectors
Rack and Panel Connectors
Microminiature Connectors
Circular/Filter/Hermetic/Fiber Optic Connectors
Initially pioneered by Cannon during the 1930s, Interconnect
Solutions is the world leader in rack and panel connectors, offering
unmatched variety of shell configurations and insert
arrangements,
materials, plating, and contact options. Many of our standard and
custom designs meet the stringent requirements of ARINC 600,
ARINC 404 (MIL-C-81659), and MIL-DTL-83733 standards.
As a world leader in circular, filter, and hermetic connectors,
ITT can
leverage its design and manufacturing expertise to fit virtually any
application. Our expertise includes fast positive mating for a wide
range of military applications, as well as numerous sizes and
contact configurations for various harsh environments. Our
wide
variety of fiber optic products include hybrid contacts,
multi-channel,
rack and panel, and hi-rel assemblies, including MIL and ARINC
standard solutions.ITT can meet numerous specs, including
NATO and MIL standards.
Cannon invented D-sub connectors in 1952. Our family
of D-Subs now includes combinations of signal, power and
RF, as
well as severe service sealed connectors. Cannon D-Subs are
available with an extensive line of backshells and accessories and
are one of the most economical shielded connector solutions
available. ITT D-Sub connectors are qualified to the MIL-DTL-
24308 specification.
Developed first by Cannon in the 1960’ s, Interconnect Solutions
microminiature connectors offer high performance
and reliability
with exceptional versatility. Available in
rectangular, circular,
and strip configurations for countless applications, many of our
connectors meet or exceed
applicable requirements of the MIL-
DTL-83513 specification.
www.ittcannon.com/rackandpanel
RF Connectors
ITT Interconnect Solutions has been providing interconnect
products to the Microwave and RF industry since 1963 (formerly
The Sealectro Corporation). The RF 50 & 75 Ohm product lines
cover UHF band through Ku band requirements. These connectors
and cable assemblies are available with a thread type, snap type,
bayonet type or slide on coupling method. The frequencies range
from DC to 18+ GHz.
www.ittcannon.com/RF50 • www.ittcannon.com/RF75
www.ittcannon.com/circulars • www.ittcannon.com/filter • www.ittcannon.com/hermetics • www.ittcannon.com/fiberoptics
www.ittcannon.com/dsubs
Transportation
The ITT ICS interconnect range includes sealed circular and rectangular
connectors in metal or plastic shells. These configurations include board to
cable or cable to cable/ bulkhead applications. Both signal and power con-
tacts can be combined in various layouts. All product lines within the
Transportation segment offer very low contact resistance providing maxi-
mum signal integrity.
www.ittcannon.com/transportation
ITT Interconnect Solutions is an international manufacturer and supplier of connectors
including circular, rectangular, fiber optic, RF, power and high voltage, audio, PMCIA,
Compact Flash Card, enclosures, cable assemblies, and application specific custom
solutions. The Interconnect Solutions portfolio includes the brands Cannon, VEAM, and
BIW. As a worldwide leader in connector technology for nearly a century, ITT offers one
of the broadest product offerings, six sigma manufacturing capability, Value Based
Product Development with exceptional engineering capability, and an extensive sales,
distribution, and customer support network.
D sub:Layout 1 3/24/09 12:37 PM Page 25
Customer Support Locations
CHINA
Tuopandun Industrial Area, Jinda Cheng,
Xiner Village, Shajing Town,
Baoan District, Shenzhen City,
Guangdong, China 518125
phone: +86.755.2726.7238
fax: +86.755.2726.7515
GERMANY
Cannonstrasse 1
Weinstadt, 71384
phone: +49.7151.699.0
fax: +49.7151.699.217
FRANCE
15, Boulevard Robert Thiboust
Serris, France 77700
phone: +33.1.60.04.93.93
fax: +33.1.60.04.93.90
HONG KONG
Units 2405-6, 24/F, ING Tower
308 Des Voeux Road
Central
Hong Kong
phone: +852.2732.2720
fax: +852.2732.2919
ITALY
Corso Europa 41/43
Lainate (MI), Italy 20020
phone: +39.02938721
fax: +39.0293872300
JAPAN
11-3, 5 Chome,Hibarigaoka, Zama-shi
Kanagawa, Japan 228-0003
phone: +81.462.57.2010
fax: +81.462.57.1680
UK
Jays Close, Viables Estate
Basingstoke, RG22 4BA
phone: +44.1256.311200
fax: +44.1256.323356
USA
666 East Dyer Road
Santa Ana, CA 92705
toll free: 1.800.854.3028
phone: +1.714.557.4700
fax: +1.714.628.2142
©2008 ITT Corporation. “Engineered for life” and “Cannon” are registered trademarks of
ITT Corporation. Specification and other data are based on information available at the
time of printing, and are subject to change without notice.
www.ittcannon.com
D sub:Layout 1 3/24/09 12:37 PM Page 26
