Actual size
Crystal oscillator
S
p
ecifications
(
characteristics
)
Item Symbol Specifications Conditions / Remarks
Output frequency range f0 100.000 MHz to 175.000 MHz Please contact us about available frequencies.
Supply voltage VCC C: 3.3 V 0.165 V D: 2.5 V 0.125 V
Storage temperature T_stg -55 C to +125 C Store as bare product after packing
Operating temperature T_use G: -40 C to +85 C
Frequency tolerance *1 f_tol J: ±50 × 10-
6
Max.
Current consumption ICC 75 mA Max. 55mA Max. OE=VCC, L_ECL=50
Disable current I_dis 15μA Max. OE=GND
Output load condition L_ECL 50
Terminated to VCC-2.0V
Output voltage VOH Vcc-1.025 V Min. DC characteristics
VOL Vcc-1.62 V Max.
Symmetry SYM 45 % to 55 % at outputs crossing point
Rise/Fall times Tr/Tf 0.4 ns Max. 0.5 ns Max. at 20 % to 80 % output swing
Input voltage VIH 70% VCC Min. OE terminal
VIL 30% VCC Max.
Oscillation start up time t_str 3 ms Max. Time at minimum supply voltage to be 0 s
*1 Includes initial tolerance, temperature change, VCC change and 10years aging
*2 Output frequency is 156.25MHz (at VCC=3.3V0.165V)
Phase Jitte
r
Output frequency 100 MHz 125 MHz 156.25 MHz 175 MHz Supply voltage
Phase Jitter [fs]
(Offset Frequency 12k to 20MHz)
Typ. 125 95 85 82
VCC=2.5V0.125V
Max. 165 160 125 125
Typ. 110 80 65 65 VCC=3.3V0.165V
Max. 140 120 100 100
Product Name SG7050 E BN 156.250000MHz C J G A
(Standard form) ① ② ③ ④⑤⑥⑦
①Model ②Output (E: LV-PECL) ③Frequency ④Supply voltage ⑤Frequency tolerance
⑥Operating temperature ⑦Internal identification code (“A” is default)
External dimensions
(
Unit :mm
)
Foot
p
rint
(
Recommended
)
(
Unit :mm
)
④Supply voltage
C 3.3 V Typ.
D 2.5 V Typ.
⑤Frequency tolerance
J ±50 × 10-6
⑥Operating temperature
G -40 to +85°C
Product Number (Please contact us)
SG7050EBN: X1G004511xxxx00
CR YST AL OSCILLA T OR (SPXO)
OUTPUT : LV-PECL
LOW PHASE JITTER
SG7050EBN
Low phase jitter : 65fs typ.
*2
Frequency range : 100 MHz to 175 MHz
Supply voltage : 2.5V Typ. / 3.3 V Typ.
Function : Output Enable (OE)
External dimensions : 7.0 × 5.0 × 1.5 mm
Output : LV-PECL
To maintain stable operation, provide by-pass capacitor with
more than 0.1 F at a location as near as possible to the power
source terminal of the crystal products (between VCC - GND).
#5
#2
C
C≒0.1 µF
1.8
5.08
4.2 2.0
#1 #3
#4
#6
Resist
5.0±0.2
7.0±0.2
1.5±0.2
1.2
#6 #4
#1 #3
C0.5
1.4
#2
#5
2.54 2.54
2.6
E 156.250S
EBH43LC Pin map
Pin Connection
1 OE
2 N.C.
3 GND
4 OUT1
(
Positive
)
5 OUT2(Negative)
6 VCC
Note .
OE pin = "H" or "open" : Specified frequency output.
OE pin = "L" : Output is disable.
PROMOTION OF ENVIRONMENTAL MANAGEMENT SYSTEM
CONFORMING TO INTERNATIONAL STANDARDS
At Seiko Epson, all environmental initiatives operate under the
Plan-Do-Check-Action (PDCA) cycle designed to achieve continuous
improvements. The environmental management system (EMS)
operates under the ISO 14001 environmental management standard.
All of our major manufacturing and non-manufacturing sites, in
Japan and overseas, completed the acquisition of ISO 14001
certification.
WORKING FOR HIGH QUALITY
In order provide high quality and reliable products and services
than meet customer needs,
Seiko Epson made early efforts towards obtaining ISO9000 series
certification and has acquired ISO9001 for all business
establishments in Japan and abroad. We have also acquired ISO/TS
16949 certification that is requested strongly by major automotive
manufacturers as standard.
►Explanation of the mark that are using it for the catalog
►Pb free.
►Complies with EU RoHS directive.
*About the products without the Pb-free mark.
Contains Pb in products exempted by EU RoHS directive.
(Contains Pb in sealing glass, high melting temperature type solder or other.)
►Designed for automotive applications such as Car Multimedia, Body Electronics, Remote Keyless Entry etc.
►Designed for automotive applications related to driving safety (Engine Control Unit, Air Bag, ESC etc ).
Seiko Epson Corporation
Notice
This material is subject to change without notice.
Any part of this material may not be reproduced or duplicated in any form or any means without the written permission of Seiko Epson.
The information about applied circuitry, software, usage, etc. written in this material is intended for reference only. Seiko Epson does
not assume any liability for the occurrence of infringing on any patent or copyright of a third party. This material does not authorize the
licensing for any patent or intellectual copyrights.
When exporting the products or technology described in this material, you should comply with the applicable export control laws and
regulations and follow the procedures required by such laws and regulations.
You are requested not to use the products (and any technical information furnished, if any) for the development and/or manufacture of
weapon of mass destruction or for other military purposes. You are also requested that you would not make the products available to
any third party who may use the products for such prohibited purposes.
These products are intended for general use in electronic equipment. When using them in specific applications that require extremely
high reliability, such as the applications stated below, you must obtain permission from Seiko Epson in advance.
/ Space equipment (artificial satellites, rockets, etc.) / Transportation vehicles and related (automobiles, aircraft, trains,
vessels, etc.) / Medical instruments to sustain life / Submarine transmitters / Power stations and related / Fire work equipment
and security equipment / traffic control equipment / and others requiring equivalent reliability.
All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective.
ISO 14000 is an international standard for environmental
management that was established by the International
Standards Organization in 1996 against the background of
growing concern regarding global warming, destruction of
the ozone layer, and global deforestation.
ISO/TS16949 is the international standard that added the
sector-specific supplemental requirements for automotive
industry based on ISO9001.
