Raltron Electronics Corporation 10651 NW 19th St. Miami, Florida 33172 U.S.A.
Tel: 305-593-6033 Fax: 305-594-3973 e-mail: sales@raltron.com Internet: http://www.raltron.com
FREQUENCY RANGE 3.20 MHz TO 70.00 MHz
MODE OF OSCILLATION FUNDAMENTAL 3.20 MHz TO 40.320 MHz
THIRD OVERTONE 24.576 MHz TO 70.00 MHz
FREQUENCY TOLERANCE AT 25°C ±30 PPM TYPICAL
±50 PPM MAXIMUM
FREQUENCY STABILITY OVER TEMPERATURE RANGE ±50 PPM TYPICAL
±100 PPM MAXIMUM
OPERATING TEMPERATURE RANGE -20º C TO +70º C STANDARD
-40º C TO +85º C EXTENDED
STORAGE TEMPERATURE RANGE -55º C TO +125º C
AGING ±5 PPM PER YEAR MAXIMUM
LOAD CAPACITANCE 10 pF TO 32 pF OR SERIES
EQUIVALENT SERIES RESISTANCE (ESR) SEE TABLE
DRIVE LEVEL 0.1 mW TYPICAL
CRYSTAL CUT AT STRIP
SPECIFICATIONS
TYPICAL FREQUENCIES AND ESR CHARACTERISTICS*
P ART NUMBERING SYSTEM
SURFACE MOUNT MICROPROCESSOR CRYST AL
FEATURES
SERIES AS-2SPD
EXCELLENT CLOCK SIGNAL GENERA TOR FOR CPU’s
A VAILABLE IN EXTENDED TEMPERATURE RANGE
LOW PROFILE SURFACE MOUNT
EPSON MA506 PIN OUT COMP ATIBLE
FREQUENCY LOAD CAPACITANCE
AS HC-49/S S MD IN MHz 10 TO 32 pF FOR PARALLEL
S FOR SERIES F
3OT FUNDAMENTAL
THIRD O VERTO NE
MODEHOLDERTYPE -- -
EXTENDED
TEM PERATURE TAP E AND
REEL
EXT 2PD 2 PAD
SMD TYPE TR
-
CONFIGURATION
-
EXAMPLE: AS-24.576-10-F-EXT-2PD-TR
F RE QUE N C Y (MHz) OHM S M A X M OD E
3.579 TO 3.99 150 FUND
4.000 TO 4.999 130 FUND
5.000 TO 5.999 100 FUND
6.000 TO 6.999 80 FUND
7.000 TO 7.999 70 FUND
8.000 TO 9.999 60 FUND
10.000 TO 14.999 50 FUND
15.000 TO 40.320 40 FUND
24.000 TO 28.999 80 3rd OT
29.000 TO 70.000 70 3rd OT
* LOWER RESISTANCIES ARE AVAILABLE ON SPECIAL ORDER
Raltron Electronics Corporation 10651 NW 19th St. Miami, Florida 33172 U.S.A.
Tel: 305-593-6033 Fax: 305-594-3973 e-mail: sales@raltron.com Internet: http://www.raltron.com
REFLOW SOLDERING PROFILE
9.0
.354
3.5
.139
2.3
.090 2.3
.090
2.2
.085 2.2
.085
SURFACE MOUNT MICROPROCESSOR CRYST AL
330 mm REEL DIAMETER
24 mm T APE WIDTH
12 mm PITCH
1000 PIECES PER REEL
CARRIER T APE DIMENSIONS
RECOMMENDED SOLDER PATTERN
OUTLINE DRAWING
.216 .004
5.5 ± 0.1
.945 ± .008
24.0 ± 0.3 .453 ± .004
11.5 ± 0.1
..069 ± .004
1.75 ± 0.1
.157 ± .004
4.0 ± 0.1
.079 ± .004
2.0 ± 0.1
.216 .004.216 ± .004
.059 DIA ± .004
1.5 DIA ± 0.1
.472 ± .004
12.0 ± 0.1
1.6 DIA ± 0.1
.059 DIA ± .004
13.0 MAX
4.73 MAX
11.4 MAX
9.0 ± 0.3
4.8 MAX
2.0
1.20
MARKING
.512 MAX
.186 MAX
.449 MAX
.354 ± .012
.079
.047
43
2
1
.189 MAX
mm
Scale none Dimension in inch
