1000Base-T Applications Single Port, Through Hole, Tab Up Zigzag Output Pins Pattern E & E Magnetic Products Limited SCHEMATICS Magnetic Integrated Connector Modules Compliant with IEEE802.3 standard including 350H OCL with 8mA DC Bias 1500Vrms isolation voltage per IEEE802.3 Enhanced performance on EMI suppression with metal shield Support 4 pairs of Category 5 UTP cable with 1000 Base-T full duplex applications Operating temperature 0C to +70C UL 1863 listed RoHS compliant versions are available GENERAL ELECTRICAL SPECIFICATION Insertion Loss (dB Max) Return Loss (dB Min) 1 @ 25C CMRR (dB Min) Crosstalk (dB Min) 1 0.1-100MHz 100-125MHz 0.5-40MHz 40-100MHz 0.1-100MHz 0.1-100MHz 1.0 1.2 18.0 12-20Log(F/80) 32.0 33-20Log(F/50) Hipot (Vrms) 1500 PART NUMBER TABLE 4 RoHS Part Number Turn Ratio ( 3%) (Chip : Cable) Configuration 3 LED (Left / Right) Mechanical Package Schematic MJ-11U2GYA5-G101 MJR11U2GYA5-G101 1CT:1CT TC G/Y MJ11U-01A G101 MJ-11U2GYA5-G110 MJR11U2GYA5-G110 1CT:1CT TC G/Y MJ11U-01A G110 MJ-11U2GYA5-G114 MJR11U2GYA5-G114 1CT:1CT TC G/Y MJ11U-01A G114 MJ-11U2NNA0-G101 MJR11U2NNA0-G101 1CT:1CT TC -- MJ11U-01B G101 MJ-11U2NNA0-G110 MJR11U2NNA0-G110 1CT:1CT TC -- MJ11U-01B G110 MJ-11U2NNA0-G114 MJR11U2NNA0-G114 1CT:1CT TC -- MJ11U-01B G114 Part Number 2 Notes: 1. "F" represents the test frequency specified in MHz. 2. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited. 3. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ; "A" = Auto-transformer 4. LEDs (Left / Right) : "G" = Green ; "Y" = Yellow ; "--" = None. For different LED color requirements, please contact E&E Magnetic Products Limited. 5. Panel tabs are optional. 6. All parts shown in this datasheet have gold plating thickness of 10 micro-inch (min.) over contact area. Advance options including 30 micro-inch (min.) and 50 micro-inch (min.) are also available. 2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong 1 Tel: (852) 2765 3888 Fax: (852) 2954 3304 MJ114(05) Revised in 06/07 1000Base-T Applications Single Port, Through Hole, Tab Up Zigzag Output Pins Pattern E & E Magnetic Products Limited MECHANICAL DIMENSIONS MJ11U-01A 0.450 0.100 11.43 2.54 0.050 0.050 1.27 1.27 0.100 Chip side C 2.54 0.035 0.89 0.062 2X DIA: 1.57 0.126 2X DIA: 3.20 0.042 4X DIA: 1.07 RU 10X DIA: R US (E&E P/N) (DATE) 10 8 6 4 2 9 7 5 3 1 13 14 Cable side NOTE 5 0.640 MAX. 16.26 LED (LEFT) 0.250 6.35 0.180 11 12 0.100 4.57 2.54 0.120 0.450 11.43 0.534 13.56 0.620 15.75 Recommended hole pattern viewed from component side 3.05 0.855 MAX. 21.72 LED (RIGHT) 0.555 MAX. 14.10 REFERENCE OR GAUGE PLANE J8 0.425 10.80 J1 0.125 3.18 MJ11U-01B 0.450 0.100 11.43 2.54 0.050 0.050 1.27 1.27 0.100 Chip side C 2.54 0.035 0.89 0.062 2X DIA: 1.57 0.126 2X DIA: 3.20 RU 10X DIA: R US (E&E P/N) (DATE) 10 8 6 4 2 9 7 5 3 1 0.250 6.35 0.120 3.05 Cable side NOTE 5 0.450 11.43 0.620 15.75 Recommended hole pattern viewed from component side 0.640 MAX. 16.26 0.855 MAX. 21.72 0.555 MAX. 14.10 REFERENCE OR GAUGE PLANE J8 J1 0.425 10.80 0.125 3.18 All dimensions are specified in inch with higher precedence in inch. mm 0.010 . Unless otherwise specified, all tolerances are 0.25 2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong 2 Tel: (852) 2765 3888 Fax: (852) 2954 3304 MJ114(05) Revised in 06/07 1000Base-T Applications Single Port, Through Hole, Tab Up Zigzag Output Pins Pattern E & E Magnetic Products Limited SCHEMATICS G101 Shield Primary Secondary 1CT:1CT 0.1uF 1 MDI_0+ 75 J1 2 MDI_0- 1CT:1CT 3 J2 0.1uF 75 J3 MDI_1+ 4 MDI_2+ 5 MDI_2- J4 1CT:1CT 0.1uF 6 MDI_1- 75 J5 7 J6 1CT:1CT MDI_3+ 8 0.1uF MDI_3- 75 J7 9 10 J8 1000pF/2000V RJ-45 Cable Side RJ-45 Chip Side G110 Shield Primary Secondary 1CT:1CT MDI_0- 1 1nF 75 J1 MDI_0+ 2 MDI_1- 3 1CT:1CT J2 1nF 75 J3 MDI_1+ 4 MDI_2- 5 J4 1CT:1CT 1nF MDI_2+ 6 75 MDI_3- 7 J6 1CT:1CT MDI_3+ 8 1nF 75 VCC 9 GND 10 J5 J7 J8 1000pF/2000V RJ-45 Cable Side RJ-45 Chip Side G114 Shield Primary Secondary 1CT:1CT 75 MDI_0+ 1 J1 MDI_0- 2 MDI_1+ 3 1CT:1CT 75 MDI_1- 4 5 MDI_2+ 7 MDI_2- 8 J4 1CT:1CT 75 6 J5 J6 1CT:1CT 75 MDI_3+ 9 MDI_3- 10 J2 J3 J7 J8 1000pF/2000V RJ-45 Chip Side 2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong 3 RJ-45 Cable Side Tel: (852) 2765 3888 Fax: (852) 2954 3304 MJ114(05) Revised in 06/07 1000Base-T Applications Single Port, Through Hole, Tab Up Zigzag Output Pins Pattern E & E Magnetic Products Limited LEDS COLOR AND POLARITY MJ11U-01A LED (LEFT) POLARITY COLOR LED (RIGHT) 11 12 LED (LEFT) 13 14 LED (RIGHT) PIN 13 COLOR PIN 14 GREEN POLARITY PIN 11 PIN 12 YELLOW LED SPECIFICATION @25C, FORWARD CURRENT = 20mA Standard Color Typical Wavelength (nm) Forward Voltage (volt) Typical Maximum Green 565 2.2 2.5 Yellow 590 2.1 2.5 MATERIALS Housing Contact Pins Consist of thermoset & thermoplastic materials, all of them are UL 94-V0 rated. 6 PCB Pins Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-202, method 208. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER 2/F Block A, Merit Industrial Centre, 94 Tokwawan Road, Kowloon, Hong Kong Tel: (852) 2765 3888 Fax: (852) 2954 3304 Email: eempl@eleceltek.com Website: http://www.eleceltek.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 2006, E & E Magnetic Products Limited. 2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong 4 Tel: (852) 2765 3888 Fax: (852) 2954 3304 MJ114(05) Revised in 06/07