SCHEMATICS
2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong Tel: (852) 2765 3888 Fax: (852) 2954 3304
Revised in 06/07MJ114(05)1
Magnetic Integrated Connector Modules
E & E Magnetic Products Limited
Compliant with IEEE802.3 standard including 350µH OCL
with 8mA DC Bias
1500Vrms isolation voltage per IEEE802.3
1000Base-T Applications
Single Port, Through Hole, Tab Up
Zigzag Output Pins Pattern
Enhanced performance on EMI suppression with metal shield
Support 4 pairs of Category 5 UTP cable with 1000 Base-T
Operating temperature 0°C to +70°C
RoHS compliant versions are available
UL 1863 listed
full duplex applications
PART NUMBER TABLE
Part Number
1CT:1CT
1CT:1CT
1CT:1CT
1CT:1CT
1CT:1CT
GENERAL ELECTRICAL SPECIFICATION @ 25°C
Insertion Loss
(dB Max)
Return Loss
(dB Min)
CMRR
(dB Min)
0.1-100MHz
Crosstalk
(dB Min) Hipot
(Vrms)
0.5-40MHz 40-100MHz 0.1-100MHz 0.1-100MHz
1.0 1.2 18.0 12-20Log(F/80) 32.0 33-20Log(F/50) 1500
RoHS Part Number LED
(Left / Right)
Configuration Mechanical
Package Schematic
MJ11U-01A G101
TC
TC
TC
TC
TC
G / Y
—
—
G / Y
G / Y MJ11U-01A
MJ11U-01A
MJ11U-01B
MJ11U-01B
G110
G114
G101
G110
2
4
1. “F” represents the test frequency specified in MHz.
Notes:
2. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.
3. Core location are counted from PCB (Chip) side to Cable (Media) side, where:
“T” = Isolation transformer ; “C” = Common-mode choke ; “A” = Auto-transformer
E&E Magnetic Products Limited.
5. Panel tabs are optional.
6. All parts shown in this datasheet have gold plating thickness of 10 micro-inch (min.) over contact area.
Advance options including 30 micro-inch (min.) and 50 micro-inch (min.) are also available.
4. LEDs (Left / Right) : “G” = Green ; “Y” = Yellow ; “—” = None. For different LED color requirements, please contact
Turn Ratio ( 3%)
(Chip : Cable)
1CT:1CT
MJ-11U2GYA5-G101
MJ-11U2GYA5-G110
MJ-11U2GYA5-G114
MJ-11U2NNA0-G101
MJ-11U2NNA0-G110
MJ-11U2NNA0-G114 TC — MJ11U-01B G114
100-125MHz
MJR11U2GYA5-G101
MJR11U2GYA5-G110
MJR11U2GYA5-G114
MJR11U2NNA0-G101
MJR11U2NNA0-G110
MJR11U2NNA0-G114
3
1 1
2
MECHANICAL DIMENSIONS
MJ11U-01A
E & E Magnetic Products Limited
Revised in 06/07
2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong Tel: (852) 2765 3888 Fax: (852) 2954 3304
All dimensions are specified in with higher precedence in inch.
Unless otherwise specified, all tolerances are .
inch
mm 0.010
0.25
MJ11U-01B
MJ114(05)
(E&E P/N)
(DATE)
Chip side
Cable side
UURR
R
C
US
0.450
11.43
0.100
2.54
0.050
1.27
0.050
1.27
0.100
2.54
0.250
6.35
0.100
2.54
0.180
4.57
0.120
3.05
1
3
5
7
2
4
68
11
12
13
14
0.534
13.56
0.620
15.75
0.035
0.89
0.042
1.07
0.126
3.20
0.062
1.57
10X
DIA:
DIA:
DIA:
DIA:
2X
2X
4X
Recommended hole pattern
viewed from component side
0.855
21.72 MAX.
0.555
14.10 MAX.
0.125
3.18
0.425
10.80
0.640
16.26 MAX.
LED (LEFT) LED (RIGHT)
J8 J1
REFERENCE OR
GAUGE PLANE
NOTE 5
10
9
0.450
11.43
(E&E P/N)
(DATE)
Chip side
Cable side
UURR
R
C
US
0.250
6.35 0.120
3.05
0.620
15.75
0.035
0.89
0.126
3.20
0.062
1.57
10X
DIA:
DIA:
DIA:
2X
2X
Recommended hole pattern
viewed from component side
0.855
21.72 MAX.
0.555
14.10 MAX.
0.125
3.18
0.425
10.80
0.640
16.26 MAX.
J8 J1
REFERENCE OR
GAUGE PLANE
NOTE 5
0.450
11.43
0.100
2.54
0.050
1.27
0.050
1.27
0.100
2.54
1
3
5
7
2
4
6810
9
0.450
11.43
1000Base-T Applications
Single Port, Through Hole, Tab Up
Zigzag Output Pins Pattern
3
G101
E & E Magnetic Products Limited
Revised in 06/07
2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong Tel: (852) 2765 3888 Fax: (852) 2954 3304
G110
G114
MJ114(05)
J7
Shield
RJ-45
Cable Side
J8
J2
J1
J3
J5
J4
J6
RJ-45
Chip Side
2
3
4
8
9
10
MDI_3-
MDI_2+
MDI_1+
MDI_1-
MDI_0-
MDI_3+
5
6
7
MDI_2-
1
MDI_0+
Secondary
Primary
1CT:1CT
1CT:1CT
1CT:1CT
1CT:1CT
1000pF/2000V
75Ω
75Ω
75Ω
75Ω
Shield
J2
0.1uF
1000pF/2000V
75Ω
RJ-45
Cable Side
1CT:1CT
J1
J7
J8
J6
J4
J5
J3
0.1uF 75Ω
1CT:1CT
0.1uF 75Ω
1CT:1CT
0.1uF 75Ω
1CT:1CT
RJ-45
Chip Side
9
8
7
3
2
1
MDI_1+
MDI_3+
MDI_1-
MDI_3-
MDI_0+
6
5
4
MDI_0-
MDI_2-
MDI_2+
10
Secondary
Primary
J2
Shield
1nF
1000pF/2000V
75Ω
RJ-45
Cable Side
1CT:1CT
J1
J7
J8
J6
J4
J5
J3
1nF 75Ω
1CT:1CT
1nF 75Ω
1CT:1CT
1nF 75Ω
1CT:1CT
RJ-45
Chip Side
9
8
7
3
2
1
MDI_0-
MDI_1+
MDI_3+
MDI_3-
VCC
MDI_0+
6
5
4
MDI_1-
MDI_2+
MDI_2-
10
GND
Secondary
Primary
1000Base-T Applications
Single Port, Through Hole, Tab Up
Zigzag Output Pins Pattern
SCHEMATICS
E & E Magnetic Products Limited
4 Revised in 06/07
2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong Tel: (852) 2765 3888 Fax: (852) 2954 3304
FOR MORE INFORMATION, PLEASE CONTACT
HEADQUARTER
2/F Block A, Merit Industrial Centre,
94 Tokwawan Road, Kowloon,
Hong Kong
Tel: (852) 2765 3888
Fax: (852) 2954 3304
Email: eempl@eleceltek.com
Website: http://www.eleceltek.com
Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect
of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company
does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 2006, E & E Magnetic Products Limited.
LEDS COLOR AND POLARITY
LED (RIGHT)
LED (LEFT) 13
12
11
14
MJ11U-01A LED (LEFT) LED (RIGHT)
COLOR COLOR
POLARITY POLARITY
PIN 13 PIN 14 PIN 11 PIN 12
GREEN YELLOW
LED SPECIFICATION @25 FORWARD CURRENT = 20mA°C,
Standard Color Typical Wavelength (nm) Forward Voltage (volt)
Green
Yellow
565
590
2.2
2.1
2.5
2.5
Typical Maximum
MATERIALS
Housing
PCB Pins
Contact Pins
Consist of thermoset & thermoplastic materials, all of them are UL 94-V0 rated.
Copper wire which meets solderability requirements per MIL-STD-202, method 208.
Phosphor bronze, plated with nickel under-plating and hard gold over contact area.
6
MJ114(05)
1000Base-T Applications
Single Port, Through Hole, Tab Up
Zigzag Output Pins Pattern
