FREQUENCY CONTROL PRODUCTS SURFACE MOUNT CLOCK OSCILLATOR DFN S11-ELPI (3.3 V) & DFN S11-EDPI (2.5 V) L0.2 FEATURES 5.08 Fundamental and 3rd overtone mode crystals 2.4 5.00.2 10 TO 200 MHz Low jitter L H 7.5 mm 1.7 mm 1.4 APPLICATIONS 5.08 DFN S11 1 2 3 4 5 6 2.4 E/D NC GND Output 1 Output 2 Vcc 6 1 5 2 4 3 PC board footprint 2.0 Function H0.2 Datacomms 1.4 TYPE Frequency Range DFN S11-ELPI DFN S11-EDPI 10 to 200 MHz ELECTRICAL SPECIFICATIONS supply voltage supply current (no load) 3.3 V 5 % 120 mA 2.5 V 5 % output load duty cycle @ 50% level LVPECL ( 50 to 1.3 V ) 45/55...55/45 % LVPECL ( 50 to 0.5 V ) 45/55...55/45 % 2 ns 2.27 V/ 1.68 V 2 ns 1.47 V/ 1.09 V 1 ps 1 ps high or open = enable, low = disable high or open = enable, low = disable complementary output on pin 5 180 phase shifted 180 phase shifted start up 10 ms @ 3.15 V 10 ms @ 2.37 V rise/fall times ( 20 to 80% ) high/low levels jitter RMS (12 kHz to 20 MHz) enable / disable on pin 1 FREQUENCY STABILITY types stability [ ppm ] and temperature code temperature range 0 to 70C -40 to 85C all types remarks stability code stability code stability code XB25 XB50 XB100 25 50 100 XE50 XE75 XE100 50 75 100 stability includes calibration at 25C, temperature, ageing, Vcc and load changes 1st yr. OPTIONS stability over long life time A = 5 years ORDERING CODE C = 15 years type + option code + frequency + stability/temperature code Example DFN S11-ELPI 155.52 MHz XE50B REMARK TYPE B = 10 years DFN S11-EL/ED Please consult factory for life time/stabilities possible combinations REVISION 02 CHECKED NE DATE 19.07.2007 PAGE XX