F–32
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
F
Toggle
T Series
Subminiature Toggle Switches
Features/Benefits
Compact size—small footprint
Single and double pole models
PC and panel mount
options available
RoHS compliant models available
Typical Applications
Hand-held telecommunications
Instrumentation
Medical equipment
Specifications
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
DC max. Q contact material (TX01 models): 3 AMPS @
120 V AC or 28 V DC. All other models: 2 AMPS @
120 V AC or 28 V DC. See page F-37 for additional ratings.
ELECTRICAL LIFE: TX01 models: 60,000 make-and-break
cycles at full load. All other models: 30,000 cycles.
CONTACT RESISTANCE: Below 20 m typ. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109min.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
NOTE: Any models supplied with P, R, Q, B or G contact material are RoHS compliant
and compatible.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Materials
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or
diallyl phthalate (DAP), (UL 94V-0) or glass filled nylon 4/6, flame
retardant, heat stabilized.
ACTUATOR: Brass, chrome plated.
BUSHING: Brass, nickel plated.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass, matte-tin plated.
END CONTACTS: B contact material: Copper alloy, with gold plate
over nickel plate. Q contact material: Coin silver, silver plated.
See above for additional contact materials.
CENTER CONTACTS & TERMINALS: B contact material: Copper alloy,
with gold plate over nickel plate. Q contact material: Copper alloy,
silver plated. See page F-42 for additional contact materials.
TERMINAL SEAL: Epoxy.
HARDWARE: Nut & Locking Ring: Brass, nickel plated.
Lockwasher: Steel, nickel plated. Additional hardware available
separately, see Section N.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages F-33 thru F-37. For additional options not shown in catalog, consult Customer Service Center. All models
have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Switch Function
T101 SPDT On-None-On
T102 SPDT Off-None-On
T103 SPDT On-Off-On
T105 SPDT Mom.-Off-Mom.
T107 SPDT On-Off-Mom.
T108 SPDT On-None-Mom.
T201 DPDT On-None-On
T203 DPDT On-Off-On
T205 DPDT Mom.-Off-Mom.
T207 DPDT On-Off-Mom.
T208 DPDT On-None-Mom.
T211 DPDT On-On-On.
Actuator
P3 Flatted,
anti-rotation,
.490" high
S.370" high
KLocking lever,round tip
L1 .640" high
M1 .220" high
S1 .410" high
M.210" high
L.290" high
Terminations
ARight angle, PC thru-hole
AVVertical right angle,
PC thru-hole
CPC Thru-hole
V3 Vertical mount V-bracket
ZSolder lug
WWire wrap
Bushing
H.220" high, threaded, flat
H9 .220" high, unthreaded, flat
CF Splashproof, .310" high, threaded, flat
D9 .260" high, unthreaded, keyway
T.310" high, threaded, flat
T9 .310" high, unthreaded, flat
TD .260" high, threaded, keyway
TK .310" high, threaded, keyway
Y.220" high, threaded, keyway
Y9 .220" high, unthreaded, keyway Contact Material
BGold
PGold, matte tin
QSilver
GGold over silver
RGold over silver, matte-tin
Seal
EEpoxy
Models Available
F–33
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
F
Toggle
T Series
Subminiature Toggle Switches
SWITCH FUNCTION
DPDT
MOM. = Momentary
* Wiring for 3-way switch refer to page N-10
All models with all options when ordered with G, L, R or Q contact material.
SPDT
SPST
2-1
2-1
3-1
N/A
OPEN
N/A
2-3
2-3
OPEN
ON NONEON
ON OFF ON
MOM. OFF MOM.
ON OFF MOM.
OFFNONEON
T101
T103
T105
T107
T102
SP
SCHEMATIC
CONNECTED TERMINALS
POS. 1POS. 2 POS. 3
SWITCH FUNCTION
POS. 1 POS. 2 POS. 3
MODEL
NO.
NO.
POLES C&K markingon opposite sideC&K marking on opposite side
T108 2-1
NA 2-3
MOM.NONEON
.338
(8,57)
SPDT
Part number shown: T101SHZQE
.338
(8,57)
DPDT
2-1,5-4
2-1,5-4
N/A
OPEN
2-3,5-6
2-3,5-6
ON NONEON
MOM. OFF MOM.
T201
T205
DP
T203 ON OFF ON
T208
T211*
ON NONEMOM.2-1,5-4N/A2-3,5-6
2-1,5-42-3,5-62-3,5-4
ON ON ON.
SCHEMATIC
CONNECTED TERMINALS
POS. 1POS. 2 POS. 3
SWITCH FUNCTION
POS. 1 POS. 2 POS. 3
MODEL
NO.
NO.
POLES C&K markingon opposite sideC&K marking on opposite side
Terminal Nos.
For Reference Only
Part number shown: T201SHZQE
F–34
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
F
Toggle
T Series
Subminiature Toggle Switches
ACTUATOR
BUSHING
2
Locking Positions
–01 & –02 Models
2 Position lock
–03 & –11 Models
3 Position lock
–08 Models
1 Position lock
2
1
H
.220" HIGH THREADED, FLAT
Y
.220" HIGH THREADED, KEYWAY
T
.310" HIGH THREADED, FLAT
H9
.220" HIGH UNTHREADED, FLAT
Y9
.220" HIGH UNTHREADED, KEYWAY
T9
.310" HIGH UNTHREADED, FLAT
L1
.640" HIGH
L
.290" HIGH
K
LOCKING LEVER
P3
ANTI-ROTATION, FLATTED,
.450" HIGH
S
.370" HIGH
M
.210" HIGH
M1
.220" HIGH
(with “T” bushing)
S1
.410" HIGH
(with “T” bushing)
Available with T & T9 bushings only.
Dress nut part number 709901201
supplied standard with threaded bushing.
1
Actuator shown with standard H bushing.
Subtract .040 (1,02) for TD and D9 bushings,
subtract .090 (2,29) for T, T9, TK, K9 &
CF bushings.
2
Actuators shown with T, T9, TK & CF bushings,
add .050 (1,27) for TD and D9 bushings,
add .090 (2,29) for H, H9, Y & Y9 bushings.
All actuators have chrome finish (except K).
Not available with CF bushing option.
Bushing option code not required. Not available with TX05 & TX07 models.
K actuators have natural aluminum finish.
Keyway on right side. To prevent accidental actuation, toggles
must be lifted before being actuated. When released, toggles
again lock in place. Overtightening mounting nut may cause
actuator to bind.
H standard with C, W & Z terminations.
H9 standard with A, AV & V3 terminations.
Standard with Z, C or W terminations.
Standard with A, AV or V3 terminations.
1
.214
(5,44)
1
F–35
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
F
Toggle
T Series
Subminiature Toggle Switches
BUSHING
TERMINATIONS
PANEL MOUNTING
10-48 BUSHING
Without Locking Ring
With Standard Locking Ring
1/4 IN. BUSHING
With Standard Locking Ring
Without Locking Ring
With Small Locking Ring
Without Locking Ring
Without Locking Ring
SP DP
PC MOUNTING
T102 – omit center hole.
SP DP
SP DP
TK
.310" HIGH THREADED, KEYWAY
Z
SOLDER LUG
W
WIRE WRAP
C
PC THRU-HOLE
TD
.260" HIGH THREADED, KEYWAY
D9
.260" HIGH UNTHREADED, KEYWAY
CF
SPLASHPROOF, .310" HIGH THREADED, FLAT
IP67 Degree of protection.
Internal o-ring actuator seal and
external bushing seal washer standard.
Not available with K locking lever option.
Not available with P or R contact materials.
F–36
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
F
Toggle
T Series
Subminiature Toggle Switches
TERMINATIONS
Actuator Shown In Pos. 1
PC MOUNTING
Actuator Shown In Pos. 1
.214
(5,44) .022
(0,56)
.128
(3,25)
PC MOUNTING
Actuator Shown
In Pos. 1
PC MOUNTING
Actuator Shown In Pos. 1
.214
(5,44)
.026
(0,66)
.153
(3,89)
PC MOUNTING
T102 Models:
Omit terminal 2
Actuator Shown
In Pos. 1
.214
(5,44)
.358
(9,08)
PC MOUNTING
T102 Models:
Omit center hole.
A
RIGHT ANGLE, PC THRU-HOLE
A
RIGHT ANGLE, PC THRU-HOLE
AV
VERTICAL RIGHT ANGLE, PC THRU-HOLE
AV
VERTICAL RIGHT ANGLE, PC THRU-HOLE
V3
VERTICAL MOUNT, V-BRACKET
Not available with T102 model.
NOTE: Terminal bend radii and lead-in manufacturing option.
T102 Models: Omit terminal 2
NOTE: Terminal bend radii and lead-in manufacturing option.
T101MH9ABE
Horizontal Actuation
SPDT
T201MH9ABE
Horizontal Actuation
DPDT
T101MH9AVBE
Vertical Actuation
SPDT
T201MH9AVBE
Vertical Actuation
DPDT
T101MH9V3BE
SPDT
F–37
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
F
Toggle
T Series
Subminiature Toggle Switches
TERMINATIONS
Actuator Shown In Pos. 1
PC MOUNTING
V3
VERTICAL MOUNT, V-BRACKET
CONTACT MATERIAL
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2
END CONTACTS: Coin silver, with gold plate over nickel plate.
3
CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
4
END CONTACTS: Coin silver, silver plated.
5
CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
6
TERMINALS: Copper alloy, with matte-tin over nickel plate.
All models with all options when ordered with R, G, or Q contact material.
B contact material standard with A, AV, V3 & W terminations.
Q contact material standard with C & Z terminations.
SEAL
E
EPOXY SEAL
T201MH9V3BE
DPDT
OPTION
CODE CONTACT
MATERIAL TERMINAL
PLATING RATINGS
SILVER
5
GOLD
1
SILVER
4,5
GOLD OVER
SILVER
2,3
GOLD
3
MATTE-TIN
6
GOLD
1
MATTE-TIN
6
LOW LEVEL/
DRY CIRCUIT
POWER
LOW LEVEL/DRY
CIRCUIT OR POWER
0.4 VA MAX. @ 20 V AC OR DC MAX.
TX01 MODELS: 3 AMPS @ 120 V AC OR 28 V DC.
ALL OTHER MODELS: 2 AMPS @ 120 V AC OR 28 V DC.
TX01 MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR
3 AMPS @ 120 V AC OR 28 V DC.
ALL OTHER MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX.
OR 2 AMPS @ 120 V AC OR 28 V DC.
B
P
Q
G
R
AVAILABLE HARDWARE
1/4-40 uns-2A nut
.524 (13,3)
.658 (16,7)
.331 (8,4)
759D02000
SEALING BOOT
* Note: For use with S1 actuator style when combined with T, TK, and CF bushings.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
C&K Components:
T101MH9V3BE T103SHV3QE T103SH9V3BE T101MHZQE T101STKCQE T201KZBE T211M1TAVBE
T101MCFZGE T103SHZQE T203SHZQE T103SHCQE T103SCFCQE T101KAKE T101KZQE T201MY9V3BE
T201SHCQE T101MH9ABE T101MH9AVBE T101SHCQE T201MH9ABE T101SHZQE T201SHZQE
T203S1TDZGE T102LHZQE T105SHZQE T107P3T9ALE T207SHZQE T207SHZBE T101MHZBE T201LHCGE
T211STKCQE T101KH9AK T101STDCBE T101LHZQE T101MH9AVQE T101S1H9V3BE T101SK9V3BE
T201MH9AQE T105SH9AVME T101L1H9CQE T101MHAVBE T103LTDZQE T103MY9CQE T105LHZQE
T107MHZBE T208SH9AVBE T101L1Y9V3BE T101M1H9ABE T101M1HCBE T101M1TAVBE T101MHV3PE
T101MY9CBE T101S1HABE T101S1T9ZBE T101S1TAGE T101S1TDZQE T101SCFABE T101SCFZBE
T101SH9AGE T101SH9AVGE T101SH9AVQE T101SHCGE T101SHV3BE T101SYCQE T102M1HZBE
T102MH9AVBE T102MHAVBE T102S1TZQE T102SHWBE T102SHWQE T103KAKE T103KCQE T103KZBE
T103LTZQE T103M1H9AKE T103M1TAGE T103MHABE T103MHCRE T103MTAGE T103P3TAGE T103P3TCBE
T103S1HAQE T103S1T9CQE T103S1T9V3QE T103S1TCQE T103S1YZBE T103SCFALE T103SH9ABE
T103SH9CBE T103SHWQE T103STAGE T103STZQE T105L1HZBE T105M1H9AVBE T101KCBE
T102P3T9V3PE T201S1TDZGE T101MYZBE T101KABE T101KAVBE