KBP304G~KBP310G GLASS PASSIVATED BRIDGE RECTIFIERS REVERSE VOLTAGE - 400 to 1000 Volts FORWARD CURRENT - 3.0 Ampere FEATURES KBP * Rating to 1000V PRV * Ideal for printed circuit board * Reliable low cost construction utilizing molded plastic KBP DIM. technique * The plastic material has UL flammability classification 94V-0 A B B A F M K C D E C + ~ ~ - I L D MECHANICAL DATA * Polarity : As marked on body * Weight : 0.05 ounces, 1.52 grams * Mounting position : Any 14.25 14.73 1.70 d 1.40 1.80 2.20 F 0.80 3.56 1.10 4.06 I J K d 14.75 3.65 10.60 E G H H G J MAX. MIN. 14.25 3.35 10.20 L M 0.35 0.55 1.22 1.42 0.76 0.86 2.7 x 45 (Typ.) - 3 - 2 All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. CHARACTERISTICS SYMBOL KBP304G KBP306G KBP308G KBP310G UNIT Maximum Repetitive Peak Reverse Voltage VRRM 400 600 800 1000 V Maximum RMS Voltage VRMS 280 420 560 700 V VDC 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward Rectified (With heatsink) (Without heatsink) Current @TC=105C Peak Forward Surge Current @ Tj = 25 8.3ms single half sine-wave Peak Forward Surge Current @ TJ = 125 @ Tj = 25 1.0ms single half sine-wave @ TJ = 125 I(AV) 3.0 1.9 A IFSM 90 80 A IFSM 180 160 A VF 1.1 V IR 5.0 500 uA Maximum Forward Voltage at 3.0A DC Maximum DC Reverse Current at rated Blocking Voltage @Tj=25C @Tj=125C 2 2 2 I t Rating for fusing (3mst 8.3ms) I t 26.5 A S Typical Junction Capacitance per element (Note 1) CJ 50 pF RJC RJL RJA RJC RJL RJA 10 12 30 12 18 40 TJ -55 to +150 C TSTG -55 to +150 C Typical thermal resistance (Unit mounted on 30mmx30mmx1mm Copper plate heatsink.) Typical thermal resistance (without heatsink) Operation Temperature Range Storage Temperature Range Note: (1) Measured at 1.0MHz and applied reverse voltage of 4.0V DC. C/W C/W REV. 7, Sep-2012, KBDE06 RATING AND CHARACTERISTIC CURVES KBP304G thru KBP310G FIG.2- MAXIMUM NON-REPETITIVE SURGE CURRENT FIG.1- FORWARD CURRENT DERATING CURVE 3 80 70 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) Heat sink : 30*30*1 mm Copper plate 2.5 2 Without heat sink 1.5 1 0.5 60 50 40 30 20 10 RESISTIVE OR INDUCTIVE LOAD 0 Single Half-Sine-Wave 0 0 25 50 75 100 125 150 1 10 CASE TEMAERATURE, (C) FIG.3- TYPICAL JUNCTION CAPACITANCE FIG.4- TYPICAL FORWORD CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT, (A) 10 Tj=25C, f=1MHz 1 10 Tj=125C Tj=25C 1 PULSE WIDTH : 300us 0.1 1 10 100 0.4 REVERSE VOLTAGE, (V) 0.6 0.8 1 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG.6_NON-REPE TITIVE SURGE CURRENT FIG.5- TYPICAL REVERSE CHARACTERISTICS 1000 1000 Tj=150C PEAK FORWARD SURGE CURRENT, (A) CAPACITANCE, (pF) 100 INSTANTANEOUS REVERSE CURRENT, (uA) 100 NUMBER OF CYCLES AT 60Hz 100 Tj=125C 10 Tj=100C 1 Tj=75C Tj=50C 0.1 Tj=25C Tj=25C 100 Tj=125C _____ Sine Wave Square Wave - - - - - - 0.01 0 100 200 300 400 500 600 700 RAT ED PEAK REVERSE VOLT AGE, (V) 800 900 10 1 10 tp, (ms) Legal Disclaimer Notice KBP304G thru KBP310G Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.