Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
GN (AGN)
ASCTB13E 201209-T
ORDERING INFORMATION
High Sensitivity, with
100mW nominal operating
power, in a compact and
space saving case
GN RELAYS (AGN)
RoHS compliant
FEATURES
1. Compact slim body saves space
Thanks to the small surface area of 5.7
mm × 10.6 mm .224 inch × .417 inch
and low height of 9.0 mm .354 inch,
the packaging density can be
increased to allow for much smaller
designs.
2. High sensitivity single side stable
type (Nominal operating power:
100mW) is available
3. Outstanding surge resistance.
Surge breakdown voltage between
contacts and coil:
2,500 V 2×10 µs (Telcordia)
Surge breakdown voltage between
open contacts:
1,500 V 10×160 µs (FCC part 68)
4. The use of twin crossbar contacts
ensures high contact reliability.
AgPd contact is used because of its
good sulfide resistance. Adopting low-
gas molding material. Coil assembly
molding technology which avoids
generating volatile gas from coil.
5. Increased packaging density
Due to highly efficient magnetic circuit
design, leakage flux is reduced and
changes in electrical characteristics
from components being mounted
close-together are minimized. This all
means a packaging density higher
than ever before.
6. Nominal operating power: 140 mW
7. Outstanding vibration and shock
resistance.
Functional shock resistance: 750 m/s2
Destructive shock resistance:
1,000 m/s2
Functional vibration resistance:
10 to 55 Hz (at double amplitude of
3.3 mm .130 inch)
Destructive vibration resistance:
10 to 55 Hz (at double amplitude of
5 mm .197 inch)
8. Sealed construction allows
automatic washing.
TYPICAL APPLICATIONS
1. Telephonic equipment
2. Telecommunications equipment
3. Security equipment
4. Test and Measurement equipment
5. Electronic Consumer and Audio
Visual equipment
Nominal coil voltage (DC)
1H: 1.5V 03: 3V 4H: 4.5V 06: 6V 09: 9V
12: 12V 24: 24V
Contact arrangement
2: 2 Form C
Type of operation
0: Standard type (B.B.M.)
AGN 2 0
Operating function
0: Single side stable
1: 1 coil latching
6: High sensitivity single side
stable type
Terminal shape
Nil:
A:
S:
Standard PC board terminal
Surface-mount terminal A type
Surface-mount terminal S type
Packing style
Nil:
X:
Z:
Tube packing
Tape and reel packing (picked from 1/2/3/4 pin side)
Tape and reel packing (picked from 5/6/7/8 pin side)
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
GN (AGN)
ASCTB13E 201209-T
TYPES
1. Standard PC board terminal
Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.
2. Surface-mount terminal
1) Tube packing
: For each surface-mounted terminal identification, input the following letter. A type: A, S type: S
Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.
2) Tape and reel packing
: For each surface-mounted terminal identification, input the following letter. A type: A, S type: S
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3/4-pin side) is also available.
2. Please inquire if you require a relay, between 1.5 and 24 V DC, with a voltage not listed.
RATING
1. Coil data
1) Single side stable type
2) 1 coil latching type
*Pulse drive (JIS C 5442-1996)
Nominal coil voltage Single side stable 1 coil latching High sensitivity single side stable
Part No. Part No. Part No.
1.5V DC AGN2001H AGN2101H AGN2601H
3V DC AGN20003 AGN21003 AGN26003
4.5V DC AGN2004H AGN2104H AGN2604H
6V DC AGN20006 AGN21006 AGN26006
9V DC AGN20009 AGN21009 AGN26009
12V DC AGN20012 AGN21012 AGN26012
24V DC AGN20024 AGN21024 AGN26024
Nominal coil voltage Single side stable 1 coil latching High sensitivity single side stable
Part No. Part No. Part No.
1.5V DC AGN2001H AGN2101H AGN2601H
3V DC AGN20003 AGN21003 AGN26003
4.5V DC AGN2004H AGN2104H AGN2604H
6V DC AGN20006 AGN21006 AGN26006
9V DC AGN20009 AGN21009 AGN26009
12V DC AGN20012 AGN21012 AGN26012
24V DC AGN20024 AGN21024 AGN26024
Nominal coil voltage Single side stable 1 coil latching High sensitivity single side stable
Part No. Part No. Part No.
1.5V DC AGN2001HZ AGN2101HZ AGN2601HZ
3V DC AGN20003Z AGN21003Z AGN26003Z
4.5V DC AGN2004HZ AGN2104HZ AGN2604HZ
6V DC AGN20006Z AGN21006Z AGN26006Z
9V DC AGN20009Z AGN21009Z AGN26009Z
12V DC AGN20012Z AGN21012Z AGN26012Z
24V DC AGN20024Z AGN21024Z AGN26024Z
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
1.5V DC
75%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
93.8mA 16Ω
140mW 150%V of
nominal voltage
3V DC 46.7mA 64.2Ω
4.5V DC 31mA 145Ω
6V DC 23.3mA 257Ω
9V DC 15.5mA 579Ω
12V DC 11.7mA 1,028Ω
24V DC 9.6mA 2,504Ω230mW 120%V of
nominal voltage
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
1.5V DC
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
66.7mA 22.5Ω
100mW 150%V of
nominal voltage
3V DC 33.3mA 90Ω
4.5V DC 22.2mA 202.5Ω
6V DC 16.7mA 360Ω
9V DC 11.1mA 810Ω
12V DC 8.3mA 1,440Ω
24V DC 5.0mA 4,800Ω120mW
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
GN (AGN)
ASCTB13E 201209-T
3) High sensitivity single side stable type
*Pulse drive (JIS C 5442-1996)
2. Specifications
Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 24).
REFERENCE DATA
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
1.5V DC
80%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
66.7mA 22.5Ω
100mW 150%V of
nominal voltage
3V DC 33.3mA 90Ω
4.5V DC 22.2mA 202.5Ω
6V DC 16.7mA 360Ω
9V DC 11.1mA 810Ω
12V DC 8.3mA 1,440Ω
24V DC 5.0mA 4,800Ω120mW 120%V of
nominal voltage
Characteristics Item Specifications
Contact
Arrangement 2 Form C
Initial contact resistance, max. Max. 100 mΩ (By voltage drop 6 V DC 1A)
Contact material Stationary contact: AgPd+Au clad Movable contact: AgPd
Rating
Nominal switching capacity 1 A 30 V DC, 0.3 A 125 V AC (resistive load)
Max. switching power 30 W (DC), 37.5 V A (AC) (resistive load)
Max. switching voltage 110 V DC, 125 V AC
Max. switching current 1 A
Min. switching capacity (Reference value)*110µA 10 mV DC
Nominal operating
power
Single side stable 140mW (1.5 to 12 V DC), 230mW (24 V DC)
High sensitivity single side
stable type 100mW (1.5 to 12 V DC), 120mW (24 V DC)
1 coil latching
Electrical
characteristics
Insulation resistance (Initial) Min. 1,000MΩ (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
Breakdown voltage
(Initial)
Between open contacts 750 Vrms for 1min. (Detection current: 10mA)
Between contact and coil 1,500 Vrms for 1min. (Detection current: 10mA)
Between contact sets 1,000 Vrms for 1min. (Detection current: 10mA)
Surge breakdown
voltage (Initial)
Between open contacts 1,500 V (10×160µs) (FCC Part 68)
Between contacts and coil 2,500 V (2×10µs) (Telcordia)
Temperature rise (at 20°C 68°F)Max. 50°C
(By resistive method, nominal coil voltage applied to the coil; contact carrying current: 1A.)
Operate time [Set time] (at 20°C 68°F)Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.)
Release time [Reset time] (at 20°C 68°F)Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.) (without diode)
Mechanical
characteristics
Shock resistance Functional Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10µs.)
Destructive Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)
Vibration resistance Functional 10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10µs.)
Destructive 10 to 55 Hz at double amplitude of 5 mm
Expected life Mechanical Min. 5 × 107 (at 180 cpm)
Electrical Min. 105 (1 A 30 V DC resistive), 105 (0.3 A 125 V AC resistive) (at 20 cpm)
Conditions Conditions for operation, transport and storage*2
Ambient temperature:
(Single side stable, 1 coil latching type) –40°C to +85°C –40°F to +185°F
(High sensitivity single side stable type) –40°C to +70°C –40°F to +158°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Max. operating speed (at rated load) 20 cpm
Unit weight Approx. 1 g .035 oz
1. Max. switching capacity 2. Life curve 3. Mechanical life
Tested sample: AGN2004H, 15 pcs.
Operating speed: 180 cpm
30 100
Contact voltage, V
1.0
0.3
DC resistive load
AC resistive load
Switching current, A
Switching current, A
No. of operations, × 104
0.2 0.4 0.6 0.8 1.0 1.2
100
50
30
40
20
10
0
DC 30V resistive load
AC 125V
resistive load
4
3.5
3
2.5
2
1.5
1
0.5
100
Max.
Min.
30 50
0
Max.
Min.
Pick-up voltage
Drop-out voltage
No. of operations, ×104
Voltage, V
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
GN (AGN)
ASCTB13E 201209-T
DIMENSIONS (mm inch)
4. Electrical life (1A 30V DC resistive load)
Tested sample: AGN2004H, 6 pcs.
Operating speed: 20 cpm
Change of pick-up and drop-out voltage Change of contact resistance
5. Coil temperature rise
Tested sample: AGN2004H, AGN20024, 6 pcs.
Point measured: Inside the coil
Ambient temperature: Room temperature
0
Max.
Max.
Min.
Min.
20
10
40
60
80
90
70
50
30
100
0510
Pick-up voltage
Drop-out voltage
No. of operations, ×104
Ratio against the rated voltage, %V
0
X
20
10
40
60
80
90
70
50
30
100
0105
N.O. contact
N.C. contact
X
No. of operations, ×104
Contact resistance, mΩ
100 110 120 130 140 150
70
60
50
40
30
20
10
0
24V DC type
4.5V DC type
1 A
1 A
0 A
0 A
Coil applied voltage, %
Te mperature rise, °C
6-(1). Operate and release time (without diode)
Tested sample: AGN2004H, 6 pcs.
6-(2). Operate and release time (with diode)
Tested sample: AGN2004H, 6 pcs.
7. Ambient temperature characteristics
Tested sample: AGN2004H, 6 pcs.
80 90 100 110 120
3
2.5
2
1.5
1
0.5
0
Max.
Max.
Min.
Min.
Release time
Operate time
Coil applied voltage, %V
Operate and release time, ms
80 90 100 110 120
3
2.5
2
1.5
1
0.5
0
Max.
Min.
Max.
Min.
Coil applied voltage, %V
Operate and release time, ms
Release time
Operate time
x
60 80 10040
-40 -20 0
20
-50
50
40
30
20
10
-40
-30
-20
-10Ambient temperature, °C
Rate of change, %V
Drop-out
voltage
Pick-up
voltage
x
8. Malfunctional shock
Tested sample: AGN2004H
9-(1). Influence of adjacent mounting
Tested sample: AGN20012, 6 pcs.
9-(2). Influence of adjacent mounting
Tested sample: AGN20012, 6 pcs.
Y'
Y
XZ
Z' X'
Y
Y'
Z'
ZXX' Deenergized condition
Energized condition
1,000m/s2
1,000m/s2
1,000m/s2
1,000m/s2
1,000m/s2
1,000m/s2
068101224
-5
-10
0
5
10
-10
0
5
-5
10
ON
ON
ON
OFF OFF
OFF
Drop-out voltage
Pick-up voltage
.236 .315 .394 .472.079 .157
Inter-relay distance , mm inch
Rate of change, %V Rate of change, %V
024681012
.079 .157 .236 .315 .394 .472
-10
0
10
-10
-5
-5
5
5
0
10
Drop-out voltage
Pick-up voltage
ON
ON
ON
OFF
OFF
OFF
Inter-relay distance , mm inch
Rate of change, %V Rate of change, %V
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
1. PC board terminal
External dimensions
Standard type
10.60±0.3 5.70±0.3
0.40±0.1
(1.50)
2.20±0.15
3.20±0.15
0.25±0.1
3.20±0.15
3.50±0.3
(0.50)
9.00±0.3
.417±.012 .224±.012
.016±.004
(.059)
.087±.006
.126±.006
.010±.004
.126±.006
.138±.012
(.020)
.354±.012
PC board pattern
Tolerance: ±0.1 ±.004
3.20
2.20
7.60
3.20
0.85 dia.
.126
.087
.299
.126
.033 dia.
Schematic (Bottom view)
Single side stable
High sensitivity
single side stable
(Deenergized condition)
1 coil latching
(Reset condition)
Direction indication
8765
1234
Direction indication
4
5
2
78
1
6
3
CAD Data
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
GN (AGN)
ASCTB13E 201209-T
2. Surface-mount terminal
Schematic (Top view)
NOTES
Type External dimensions Suggested mounting pad (Tolerance: ±0.1 ±.004)
Single side stable/1 coil latching/High sensitivity single side stable Single side stable/1 coil latching/High sensitivity single side stable
A type
S type
CAD Data
10.60±0.3 5.70±0.3
0.40±0.1
(1.50)
3.20±0.15
3.20±0.15
0.25±0.1
2.20±0.15
7.40±0.3
(0.50)
9.00±0.3 Max. 10.00
.417±.012 .224±.012
.016±.004
(.059)
.126±.006
.126±.006
.010±.004
.087±.006
.291±.012
(.020)
.354±.012 .394
2.20
3.20
5.30
3.10
0.80
.087
.126
.209
.122
.031
10.60±0.3 5.70±0.3
3.20±0.15
0.40±0.1
(1.50)
0.25±0.1
3.20±0.15
2.20±0.15
5.70±0.3
(0.50)
9.00±0.3 Max. 10.00
.417±.012 .224±.012
.126±.006
.016±.004
(.059)
.010±.004
.126±.006
.087±.006
.224±.012
(.020)
.354±.012 .394
2.20
3.20
4.45
2.25
0.80
.087
.126
.175
.089
.031
Single side stable
High sensitivity single side stable
(Deenergized condition)
1 coil latching
(Reset condition)
Direction indication
1234
8765
Direction indication
5678
2134
1. Packing style
1) The relay is packed in a tube with the
relay orientation mark on the left side, as
shown in the figure below.
2) Tape and reel packing
(A type)
(1)-1 Tape dimensions
mm inch
(S type)
(1)-2 Tape dimensions
(2) Dimensions of plastic peel
mm inch
2. Automatic insertion
To maintain the internal function of the
relay, the chucking pressure should not
exceed the values below.
Chucking pressure in the direction A:
4.9 N {500gf} or less
Chucking pressure in the direction B:
9.8 N {1 kgf} or less
Chucking pressure in the direction C:
9.8 N {1 kgf} or less
Please chuck the portion.
Avoid chucking the center of the relay.
In addition, excessive chucking pressure
to the pinpoint of the relay should be
avoided.
Orientation (indicates PIN No.1)stripe
Stopper (green) Stopper (red)
Relay polarity bar
(Z type)
Tape coming out direction
General tolerance ±0.1 mm .004 inch
4.00
1.75
0.40
10.70±0.2
2.00
2.00 dia.
GN relays 16.00 8.00
11.50
24.00±0.3
11.10
1.50+0.1
0 dia.
.059+.004
0 dia.
.157
.069
.016
.421±.008
.079
.079 dia.
.630 .315
.453
.945±.012
.437
Relay polarity bar
(Z type)
Tape coming out direction
General tolerance ±0.1 mm .004 inch
1.50+0.1
0 dia.
.059+.004
0 dia.
2.0 dia.
4.00
1.75
10.70±0.2
0.40
2.00
GN relays 16.00 6.3
11.50
11.10
24.00±0.3
.079 dia.
.157
.069
.421±.008
.016
.079
.630 .248
.453
.437
.945±.012
2.0
.079
13 dia.
.512 dia.
21 dia.
.827 dia. 80 dia.
3.150 dia.
380 dia.
14.961 dia.
For general cautions for use,
please refer to the “Cautions for
use of Signal Relays” or “General
Application Guidelines”.
ACB
