BAV99 VISHAY Vishay Semiconductors Dual Switching Diode Features 3 * Fast switching speed * High conductance * Surface mount package ideally suited for automatic insertion * Connected in series 1 Mechanical Data 2 18109 Marking: JE Packaging Codes/Options: E8 / 10k per 13" reel (8 mm tape), 30k/box E9 / 3k per 7" reel (8 mm tape), 30k/box Case: SOT-23 Plastic Package Weight: approx. 8 mg Parts Table Part Type differentiation BAV99 Ordering code Dual Serial BAV99 Remarks Tape and Reel Package SOT-23 Absolute Maximum Ratings Tamb = 25 C, unless otherwise specified Parameter Test condition Symbol Value Unit VRM 100 V VRRM = V RWM = VR 70 V tp = 1s IFSM 1 A Non repetitive peak reverse voltage Repetitive peak reverse voltage = Working peak reverse voltage = DC Blocking voltage Peak forward surge current tp = 1 s IFSM 4.5 A Average forward current half wave rectification with resistive load and f 50 MHz, on ceramic substrate 10 mm x 8 mm x 0.7 mm IFAV 150 mA Forward current on ceramic substrate 10 mm x 8 mm x 0.7 mm IF 250 mA Power dissipation on ceramic substrate 10 mm x 8 mm x 0.7 mm Ptot 300 mW Maximum Thermal Resistance Tamb = 25 C, unless otherwise specified Parameter Junction ambient Junction and storage temperature range Document Number 85718 Rev. 6, 15-Jul-03 Test condition on ceramic substrate 10 mm x 8 mm x 0.7 mm Symbol Value Unit RthJA 430 K/W Tj = Tstg - 55 to + 150 C www.vishay.com 1 BAV99 VISHAY Vishay Semiconductors Electrical Characteristics Tamb = 25 C, unless otherwise specified Parameter Max Unit IF = 1 mA VF 715 mV IF = 10 mA VF 855 mV IF = 50 mA VF 1 V IF = 150 mA VF 1.25 V VR = 70 V IR 2.5 A VR = 70 V, Tj = 150 C IR 50 A VR = 25 V, Tj = 150 C IR 30 A Diode capacitance VR = 0, f = 1 MHz CD 1.5 pF Reverse recovery time IF = 10 mA to IR = 1 mA, VR = 6 V, RL = 100 trr 6 ns Forward voltage Reverse current Test condition Symbol Min Typ. Typical Characteristics (Tamb = 25 C unless otherwise specified) IF - Forward Current ( mA) 1000 100 Tj =100C 10 Tj =25C 1 0.1 0.01 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 14356 V F - Forward Voltage ( V ) Figure 1. Forward Current vs. Forward Voltage www.vishay.com 2 Document Number 85718 Rev. 6, 15-Jul-03 BAV99 VISHAY Vishay Semiconductors Package Dimensions in mm top view 14373 Document Number 85718 Rev. 6, 15-Jul-03 www.vishay.com 3 BAV99 VISHAY Vishay Semiconductors Layout for RTheta;JA test Thickness: Fiberglass 0.059 in. (1.5 mm) Copper leads 0.012 in. (0.3 mm) 0.30 (7.5) 0.12 (3) .04 (1) .08 (2) .04 (1) .08 (2) 0.59 (15) 0.03 (0.8) 0.47 (12) 0.2 (5) 0.06 (1.5) 0.20 (5.1) 17451 www.vishay.com 4 Dimensions in inches (millimeters) Document Number 85718 Rev. 6, 15-Jul-03 BAV99 VISHAY Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 Document Number 85718 Rev. 6, 15-Jul-03 www.vishay.com 5