MUR140 - MUR160 1.0A SUPER-FAST RECTIFIER Features * * * * * * Glass Passivated Die Construction Super-Fast Recovery Time For High Efficiency Low Forward Voltage Drop and High Current Capability B A Surge Overload Rating to 35A Peak A Ideally Suited for Automated Assembly Lead Free Finish, RoHS Compliant (Note 5) C Mechanical Data D * * Case: DO-41 * * Moisture Sensitivity: Level 1 per J-STD-020C Dim Min Terminals: Finish 3/4 Bright Tin. Solderable per MIL-STD-202, Method 208 A 25.40 3/4 * B 4.06 5.21 Marking: MUR140: R140 MUR160: R160 C 0.71 0.864 * * * Polarity: Cathode Band D 2.00 2.72 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 DO-41 Plastic Max All Dimensions in mm Mounting Position: Any Weight: 0.35 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Symbol MUR140 MUR160 Unit VRRM VRWM VR 400 600 V VR(RMS) 283 424 V IO 1.0 A IFSM 35 A @ IF = 1.0A, TJ = 25C @ IF = 1.0A, TJ = 150C VFM 1.25 1.05 V @ TA = 25C @ TA = 150C IRM 5.0 150 mA Reverse Recovery Time (Note 2) trr 50 ns Reverse Recovery Time (Note 3) trr 75 ns Forward Recovery Time (Note 4) tfr 50 ns Typical Junction Capacitance (Note 1) Cj 45 pF RqJA 72 K/W Tj, TSTG -65 to +175 C Average Rectified Output Current @ TT = 120C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage Typical Thermal Resistance, Junction to Ambient Operating and Storage Temperature Range Notes: 1. 2. 3. 4. 5. Measured at 1.0MHz and applied reverse voltage of 0V DC. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See Figure 5. Measured with IF = 1A, di/dt = 50A/us. Measured with IF = 1.0A, di/dt = 100A/ms, Duty Cycle 2.0%. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS30112 Rev. 6 - 2 1 of 3 www.diodes.com MUR140 - MUR160 a Diodes Incorporated 10.0 7.0 IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE FORWARD CURRENT (A) 3 2 1 5.0 50 25 75 100 125 150 0 TC = 25 C 2.0 1.0 0.5 0.1 0.05 0.01 175 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 TT, TERMINAL TEMPERATURE ( C) Fig. 1 Forward Current Derating Curve IFSM, PEAK FORWARD SURGE CURRENT (A) 0 100 C 3.0 0 0 0 175 C VF, INSTANTANEOUS VOLTAGE (V) Fig. 2 Typical Forward Current 60 80 Single Half-Sine-Wave (JEDEC Method) 40 20 50 0 TJ = 175 C 8.0 4.0 2.0 40 0.8 30 0 TJ = 100 C 0.4 0.2 0.08 20 0.04 0.02 10 0 TJ = 25 C 0.008 0 1 10 100 0.004 0.002 0 NUMBER OF CYCLES AT 60Hz Fig. 3 Surge Current Derating Curve 50 100 150 200 250 300 350 400 450 500 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Reverse Current trr +0.5A Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) Oscilloscope (Note 1) -0.25A (+) -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS30112 Rev. 6 - 2 2 of 3 www.diodes.com MUR140 - MUR160 Ordering Information Notes: (Note 6) Device Packaging Shipping MUR140-A DO-41 5K/Ammo Pack MUR140-B DO-41 1K/Bulk MUR140-T DO-41 5K/Tape & Reel, 13-inch MUR160-A DO-41 5K/Ammo Pack MUR160-B DO-41 1K/Bulk MUR160-T DO-41 5K/Tape & Reel, 13-inch 6. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf DS30112 Rev. 6 - 2 3 of 3 www.diodes.com MUR140 - MUR160