Connector Accessories AC ACC11 1211 ACCESSORY I ntroduction & Page Contents Introduction Amphenol Protective caps are developed for environmental protection needs of Circular connectors in Threaded & Bayonet versions. These are designed to meet the requirements of military standards. We also offer dummy storage receptacle to secure your cable harness when not in functional use. This catalogue describes the standard and special purpose designs used in Military and Industrial Circular connectors. Page MIL-C-26482 (MS3180 & MS181) Caps 1-2 MIL-DTL-38999 Series I (MS27501 & MS27502) Caps 3-4 MIL-DTL-38999 Series II (MS27510 & MS27511) Caps 5-6 MIL-DTL-38999 Series III (D38999/32 & D38999/33) Caps 7-8 MIL-DTL-5015 Reverse Bayonet Caps (97B-25042 & 97B-25043) Caps 9 MIL-DTL-5015 Threaded Caps (MS25042 & MS25043) Caps 10 MIL-C-10544 Audio Connector Caps for 10 Pin Caps 11 MIL-C-55116 Audio Connector Caps for 5 & 6 Pin Caps 12 MIL-DTL-22992 Caps 13 MIL-C-26482 & MIL-DTL-5015 Dummy Receptacle 14-16 MIL-DTL-38999 Series III Dummy Receptacle 16 Insertion & Removal Tool 17 Backshell for MIL-DTL-24308 18 Square Flange Gaskets for (MIL-C-26482 & MIL-DTL-5015) 19 M IL 26482 Protective Caps MS3180 & MS3181 QPL Approved Ordering Information (MIL Part Number) `x' 1.19 max. `A' `A' JANMS3180 10 C W L Designates Plug Dust Cover `H' (STD Length) `Z' `L' `F' max. After Knurling `H' (STD Length) Shell Size: 08, 10,12, 14, 16, 18, 20, 22 & 24 Style: C - With Chain R - With SS Rope Class: A - Hard Anodize black finish W - Cadmium plate finish 4.40/4.50 With chain (C) Length: L - 127.0 + 12.7/-6.35 chain/rope in lieu of std. length 4.00 With S.S. Rope (R) `X' Note: For non. std. long "L" Contact factory Ordering Information (Proprietary Part Number) 1.19 max. IMB3180 08 A F N H `A' Designates Plug Dust Cover After Knurling T-Tie Wrap Class: Aluminium A - Hard anodic B - Zinc nickel finish F - 48 hrs. electroless nickel W - 500 hrs. cadmium olive drab EB - Cad. free zinc cobolt -olive drab finish FB - Cad. free zinc cobolt - black finish T- PT FE nickel finish SD- Zinc Ni Black finish `H' `Z' `L' `F' max. (STD Length) `H' (STD Length) Shell Size: 08, 10,12, 14, 16, 18, 20, 22 & 24 4.40/4.50 G-Nylon Rope With chain 4.00 S.S.Rope Type of attachment D - bead chain passivated F - Wire rope with teflon jacket G - Nylon cord S - Sash chain passivated X - None D-Bead chain All Dimensions are in mm Shell Size 08 10 12 14 16 18 20 22 24 A F Max. Ref. Overall. 12.01 18.26 14.99 21.44 19.05 25.40 22.22 28.58 25.40 31.75 28.58 34.92 31.75 38.10 34.92 41.28 38.10 44.45 F H L Max. X Max. +0.00/-0.08 +12.70/ Length For Heavy Overall Duty -6.35 22.10 76.20 24.86 29.24 88.90 14.27 19.84 32.41 35.58 38.22 41.94 101.60 15.88 21.44 45.11 16.71 22.22 48.18 Type of end link: N - Solid ring T -Tie wrap X - None Length of attachment: H - Standard length For non- standard `H", length has to be specified in mm. All Dimensions for reference only Cap without attachment Ordering information IMB3180 - 08 Plug Dust Cover `A' Shell Size : 08,10,12,14,16,18,20,22 & 24 Class: A - Hard Anodic W - Aluminium, 500 hrs. Cadmium Olive Drab F - Aluminium, 48 hrs. electroless nickel T- Nickel PTFE finish Variant `L' 1 A - V1 M IL 26482 Protective Caps MS3180 & MS3181 QPL Approved `x' 2.39 MAX. `Q' Ordering Information (MIL Part Number) Gasket (Disk) JANMS3181 10 C W L Designates Receptacle Dust Cover Shell Size: 08, 10,12, 14, 16, 18, 20, 22 & 24 Style: C - With Chain N - With Chain &Ring. R - With SS Rope 4.50 max `H' `H' `H' `L' Class: A - Hard Anodize black finish W - Cadmium plate finish `N' `K' With Chain (C) With Chain & Ring (N) 4.50 max With S.S. Rope (R) Length: L - 127.0 + 12.7/-6.35 chain/rope in lieu of std. length Leave blank for std.length Note: For non. std. long "L" Contact factory Ordering Information (Proprietary Part Number) `X' `Q' 2.39 max. Gasket (Disk) IMB3181 08 A F N H Designates Receptacle Duct Cover Shell Size: 08, 10,12, 14, 16, 18, 20, 22 & 24 T-Tie Wrap `K' `N' G-Nylon Rope D-Bead chain With chain Class: Aluminium A - Hard anodic B - Zinc nickel finish F - 48 hrs. electroless nickel W - 500 hrs. cadmium olive drab EB - Cad. free zinc cobolt -olive drab finish FB - Cad. free zinc cobolt - black finish T- PT FE nickel finish 4.50 max. SD- Zinc Ni Black finish `H' `H' 4.50 max. `H' `L' With chain & ring With S.S. Rope Type of attachment D -Bead chain passivated F - Wire rope with teflon jacket G - Nylon cord S - Sash chain passivated X - None All Dimensions are in mm Shell Size 08 10 12 14 16 18 20 22 24 H +12.70/ -6.35 L K MAX. Max. 20.62 76.20 25.40 30.18 14.27 36.67 88.90 39.67 42.88 46.02 101.60 49.23 52.37 15.29 N MIN 14.68 17.86 22.63 25.81 28.98 32.16 35.33 38.51 41.68 Q MIN 18.64 21.82 25.40 28.58 31.75 34.92 38.10 41.28 44.45 X Max. Type of end link: N - Solid ring T -Tie wrap X - None 21.44 Length of attachment: H - Standard length For non- standard `H", length has to be specified in mm. 22.22 All Dimensions for reference only Cap without attachment Ordering information IMB3181 - 08 Designates: Receptacle Dust Cover Q Shell Size : 08,10,12,14,16,18,20,22 & 24 Class: A - Hard Anodic W - Aluminium, 500 hrs. Cadmium Olive Drab F - Aluminium, 48 hrs. electroless nickel T- Nickel PTFE finish Variant `L' 2 A - V1 M IL DTL - D38999 SER I Plug Caps QPL Under Qualification STYLE `C' 29.46 max. 22.86 max B +0.25 14.40-0.38 1.19 max. 14.73 min. Cover All Dimensions are in mm Gasket T- Tie Wrap `A' Shell Size +0.02 -0.13 09 14.53 11 17.78 13 21.59 15 24.77 17 27.94 19 30.66 21 33.83 23 37.01 25 40.18 A Rivet +12.7 `H' - 6.35 STD. LENGTH Marking P/ No.as per BOM. Location Optional S- Sash Chain G- Nylon Cord D- Bead Chain `B' max 18.29 21.59 25.40 28.70 31.75 35.05 38.10 41.40 44.45 H +12.70 -6.35 76.20 88.90 101.60 All Dimensions for reference only T- (SS) Wire Rope with Teflon Jacket +0.25 4.24-0.13 Chain S/ A Ordering Information (Proprietary) ILJT27501 09 A D T H Designates Plug Dust Cover Ordering Information JANMS27501 B 11 C Shell Size: 09, 11, 13, 15, 17, 19, 21, 23 & 25 L Finish: A-Hard anodic non-conductive W-Cadmium plate with olive drab E-Electroless nickel X-Zinc cobalt olive drab Z-Zinc cobalt olive drab Designates Plug Dust Cover Shell Size: 09, 11, 13, 15, 17, 19, 21, 23 & 25 Class: B-Cadmium plate olive drab finish C-Hard Anodize black finish F-Electroless nickel finish Type of attachment: D-Bead chain passivated G-Nylon cord S-Sash chain T-S.S. wire rope with teflon jacket X- None Style: C-With chain A- Without chain Length L- 127.0 + 12.7/-6.35 chain/Rope in lieu of std. length. Leave blank for std. length. `H' Type of end link: T- Tie wrap X- None (Small link hole dia 4.49 mm max. Note: For non-standard long `L' contact factory. Length of attachment: H-Standard length For non-standard `H' length has to be specified in inches. Cap without attachment Ordering Information 22.86 max 14.73 min + 0.25 14.40 - 0.38 ILJT27501 08 A V1 1.19 max Designates Plug Dust Cover Shell Size: 09, 11, 13, 15, 17, 19, 21, 23 & 25 A Class: A-Hard Anodic W-Aluminium, 500 hrs. cadmium olive drab. F-Aluminium, 48 hrs. electroless nickel. T-Nickel PTFE finish. Variant 3 M IL DTL - D38999 SER I Receptacle Caps QPL Under Qualification STYLE `C' 27.94 max. 20.83 max J All Dimensions are in mm T- Tie Wrap A Q Cover Gasket Rivet H STD. LENGTH S- Sash Chain G- Nylon Cord D- Bead Chain T- (SS) Wire Rope with Teflon Jacket 5.84 min. Shell Size `A' max. `B' min 09 11 13 15 17 19 21 23 25 19.81 22.99 26.95 30.12 33.05 36.12 39.22 42.34 45.54 17.78 21.34 25.65 28.96 32.00 35.31 38.35 41.66 44.70 H +12.70 -6.35 `B' max J +0.38 21.84 24.89 29.46 32.51 35.81 38.61 41.91 44.96 48.01 76.20 88.90 2.67 101.60 3.51 All Dimensions for reference only B Ordering Information (Proprietary Part Number) ILJT27502 09 A D S H Designates Plug Dust Cover Ordering Information (MIL Part Number) Shell Size: 09, 11, 13, 15, 17, 19, 21, 23 & 25 JANMS27502 B 11 C L Finish: A-Hard anodic non-conductive W-Cadmium plate with olive drab E-Electroless nickel X-Zinc cobalt olive drab Z-Zinc cobalt olive drab Designates Plug Dust Cover Shell Size: 09, 11, 13, 15, 17, 19, 21, 23 & 25 Class: B-Cadmium plate olive drab finish C-Hard Anodize black finish F-Electroless nickel finish Type of attachment: D-Bead chain passivated G-Nylon cord S-Sash chain T-S.S. wire rope with teflon jacket X- None Style: C-With chain A- Without chain Length L- 127.0 + 12.7/-6.35 chain/Rope in lieu of std. length. Leave blank for std. length. `H' Type of end link: S- Solid ring T- Tie wrap X- None (Small link hole dia 4.49 mm max. Note: For non-standard long `L' contact factory. Length of attachment: H-Standard length For non-standard `H' length has to be specified in inches. Cap without attachment STYLE `A' Ordering Information ILJT27502 09 A V1 Designates: Receptacle Dust Cover A Shell Size: 09, 11, 13, 15, 17, 19, 21, 23 & 25 Class: A-Hard Anodic W-Aluminium, 500 hrs. cadmium olive drab. F-Aluminium, 48 hrs. electroless nickel. T-Nickel PTFE finish. Variant 4 M IL DTL - D38999 SER II Plug Caps QPL Under Qualification STYLE `C' 20.83 max. 14.48 max. B +0.25 5.64-0.38 7.87 min. 1.19 max. Cover Gasket All Dimensions are in mm Rivet T- Tie Wrap A `A' Shell Size +0.02 -0.13 08 12.01 10 14.99 12 19.05 14 22.22 16 25.40 18 28.58 20 31.75 22 34.92 24 38.10 `H' STD. LENGTH Marking P/ No.as per BOM. Location Optional S- Sash Chain G- Nylon Cord D- Bead Chain `B' max OVERALL 18.29 21.59 25.40 28.70 31.75 35.05 38.10 41.40 44.45 H +12.70 -6.35 76.20 88.90 101.60 All Dimensions for reference only T- (SS) Wire Rope with Teflon Jacket +0.25 4.24-0.13 Chain S/ A Ordering Information (Proprietary Part Number) IJT27510 Ordering Information (MIL Part Number) JANMS27510 A 08 C 08 A D T H Designates Plug Dust Cover Shell Size: 08, 10, 12, 14, 16, 18, 20, 22 & 24 L Finish: A-Hard anodic non-conductive W-Cadmium plate with olive drab E-Electroless nickel X-Zinc cobalt olive drab Z-Zinc cobalt olive drab Designates Plug Dust Cover Shell Size: 08, 10, 12, 14, 16, 18, 20, 22 & 24 Class: B-Cadmium plate olive drab finish C-Hard Anodize black finish F-Electroless nickel finish Type of attachment: D-Bead chain passivated G-Nylon cord S-Sash chain T-S.S. wire rope with teflon jacket X- None Style: C-With chain A- Without chain Length L- 127.0 + 12.7/-6.35 chain/Rope in lieu of std. length. Leave blank for std. length. `H' Type of end link: T- Tie wrap X- None (Small link hole dia 4.49 mm max. Note: For non-standard long `L' contact factory. Length of attachment: H-Standard length For non-standard `H' length has to be specified in inches. Cap without attachment Ordering Information 14.48 max 7.87 min + 0.25 5.64 - 0.38 IJT27510 08 A V1 1.19 max Designates Plug Dust Cover Shell Size: 08, 10, 12, 14, 16, 18, 20, 22 & 24 A Class: A-Hard Anodic W-Aluminium, 500 hrs. cadmium olive drab. F-Aluminium, 48 hrs. electroless nickel. T-Nickel PTFE finish. Variant 5 M IL DTL - D38999 SER II Receptacle Caps QPL Under Qualification Style C 20.83 max. 14.48 max. 2.40 max. All Dimensions are in mm A B T- Tie Wrap S- Sash Chain + 12.7 `H' -6.35 STD Length G- Nylon Cord D- Bead Chain Shell Size `A' max. `B' min `C' max 08 10 12 14 16 18 20 22 24 16.00 19.23 23.77 27.28 29.77 33.12 36.45 39.62 42.88 19.05 21.82 26.19 29.36 32.54 35.71 38.89 41.68 44.86 22.61 25.65 28.96 32.0 35.31 38.35 41.66 44.70 48.0 H max. 76.20 88.90 101.60 All Dimensions for reference only T- (SS) Wire Rope with Teflon Jacket `C' Solid Ring 4.49 max. Ordering Information (MIL Part Number) JANMS27511 A 08 Ordering Information (Proprietary Part Number) C L IJT27511 08 Designates Plug Dust Cover Designates: Receptacle Dust Cover Class: B-Cadmium plate olive drab finish C-Hard Anodize black finish F-Electroless nickel finish Shell Size: 08, 10, 12, 14, 16, 18, 20, 22 & 24 A D S H Finish: A-Hard anodic non-conductive W-Cadmium plate with olive drab E-Electroless nickel X-Zinc cobalt olive drab Z-Zinc cobalt olive drab Shell Size: 08, 10, 12, 14, 16, 18, 20, 22 & 24 Style: C-With chain A- Without chain N-With chain & ring R-S.S. Rope hole 3.28 max. (08 to 22 size) 3.68 max. (24 size) Type of attachment: D-Bead chain passivated F-S.S. wire rope with nylon jacket G-Nylon cord S-Sash chain T-S.S. wire rope with teflon jacket X- None Length L- 127.0 + 12.7/-6.35 chain/Rope in lieu of std. length. Leave blank for std. length. `H' Note: For non-standard long `L' contact factory. Type of end link: S- Solid ring T- Tie wrap X- None (Small link hole dia 4.49 mm max.) X1-None (Small link hole dia 3.28 mm max.) X-2 None (Small link hole dia 3.68 mm max.) Note: For non-standard long `L' contact factory. Length of attachment: H-Standard length For non-standard `H' length has to be specified in inches. Cap without attachment Ordering information IJT27511 - 08 - A - V1 Designates: Receptacle Dust Cover B Shell Size : 08,10,12,14,16,18,20,22 & 24 Class: A - Hard Anodic W - Aluminium, 500 hrs. Cadmium Olive Drab F - Aluminium, 48 hrs. electroless nickel T- Nickel PTFE finish Variant 6 M IL D3899 III Protective Caps D38999/33 & D38999/32 QPL Approved 30.0 max. `E' 2.00 max. `L' STD. Length STD. Length `L' `B' `A' `C' `D' 17.06/21.06 Ordering Information (Proprietary Part Number) (Alternate Type For Jam Nut Type Only) S.S. Rope with Ring Teflon Coating (N) ITV32 S.S. Rope With Teflon Coating (R) 09 A F N H Designates Plug Dust Cover Shell Size: 09, 11, 13, 15, 17, 19, 21, 23, & 25 All Dimensions are in mm `A' B Shell Thread -0.1P Max Size -2A -0.3L-TS 09 0.625" 23.0 11 0.750" 26.0 13 0.875" 31.0 15 1.000" 33.0 17 1.1875" 37.0 19 1.250" 40.0 21 1.375" 44.0 23 1.500" 46.0 25 1.625" 50.0 `C' +0.0 -0.15 12.50 15.75 19.53 22.71 25.88 28.55 31.72 34.80 38.07 D Max E Min `L' + 13.0 -7.0 24.0 27.0 30.0 31.0 37.0 40.0 44.0 45.0 49.0 13.0 18.0 20.0 23.0 26.0 29.0 32.0 34.0 39.0 127 Class Aluminium A - Hard seal nickel finish B - Zinc nickel finish cadmium olive drab F - 48 hrs. elctroless nickel T - PTFE Nickel Plating W - 500 Hrs. cadmium olive drab EB - Cad. free zinc cobolt -olive drab finish FB - Cad. free zinc cobolt - black finish T- PT FE nickel finish SD- Zinc Ni Black finish Composite J - Composite cadmium olive drab M - Composite electroless nickel NB - Nickel Aluminum Bronze CD - S. Steel Passivated All Dimensions for reference only Ordering Information (MIL Part Number) JAND38999/32 W 15 Type of attachment D - Bead chain passivated F - Wire rope with teflon jacket G - Nylon cord S - Sash chain passivated X - None R Designates Plug Dust Cover Class:F - Electroless nikel finish. W- Aluminium,500 hrs cadmium olive drab. Shell Size : 09,11,13,15,17,19,21,23,&25 Type of end link N - Solid ring T - Tie wrap X - None StyleR - Rope N - With rope & ring. Length of attachment H - Standard length For non-standard `H' length has to be specified in mm. Cap without attachment Ordering information ITV32 17.06 /21.06 - 09 - Designates Plug Cover Class: A - Hard Anodic W - Aluminium, 500 hrs. Cadmium Olive Drab J - Composite cadmium olive drab M - Composite electroless nickel F - Aluminium, 48 hrs. electroless nickel EB - Zinc Cobalt Loive drab T- Nickel PTFE finish B A THREAD C Shell Size : 09,11,13,15,17,19,21,23 & 25 Variant 7 A - V1 M IL D3899 III Protective Caps D38999/33 & D38999/32 QPL Approved 30 0 +- 23.0 max. 2.00 max. `D' 10 0 G- Nylon Rope Angled Ring (Alternate Type For Jam Nut Type Only) S.S. Rope with Ring Teflon Coating (N) All Dimensions are in mm `A' B Shell Thread -2A -0.1P Max Size -0.3L-TS 09 0.625" 23.0 11 0.750" 28.0 13 0.875" 31.0 15 1.000" 32.0 17 1.1875" 37.0 19 1.250" 39.0 21 1.375" 42.0 23 1.500" 45.0 25 1.625" 49.0 `C' Max D Min 27.0 32.0 37.0 40.0 44.0 46.0 49.0 54.0 56.0 17.64 21.97 25.15 29.92 32.0 36.27 38.25 42.62 44.45 12.20/15.70 `L' With S.S. rope D- Bead Chain `L' S- Sash Chain STD. Length STD. Length `C' S.S. Rope With Teflon Coating (R) Ordering Information (Proprietary Part Number) `L' + 13.0 -7.0 ITV33 09 A F N H Designates Receptocle Dust Cover Shell Size: 09, 11, 13, 15, 17, 19, 21, 23, & 25 127 Class Aluminium A - Hard seal nickel finish B - Zinc nickel finish cadmium olive drab F - 48 hrs. elctroless nickel T - PTFE Nickel Plating W - 500 Hrs. cadmium olive drab EB - Cad. free zinc cobolt -olive drab finish FB - Cad. free zinc cobolt - black finish T- PT FE nickel finish SD- Zinc Ni Black finish Composite J - Composite cadmium olive drab M - Composite electroless nickel NB - Nickel Aluminum Bronze CD - S. Steel Passivated All Dimensions for reference only Ordering Information (MIL Part Number) JAND38999/33 W 15 R Designates Receptacle Dust Cover Class:F - Electroless nikel finish. W- Aluminium,500 hrs cadmium olive drab. Type of attachment D - Bead chain passivated F - Wire rope with teflon jacket G - Nylon cord S - Sash chain passivated X - None Shell Size : 09,11,13,15,17,19,21,23,&25 StyleR - Rope N - With rope &ring. Type of end link N - Solid ring T - Tie wrap X - None Note: For non. std. long "L" Contact factory Length of attachment H - Standard length For non-standard `H' length has to be specified in mm. Cap without attachment 12.20/15.70 Ordering information ITV33 - 09 - Designates Receptacle Cover B MAX Shell Size : 09,11,13,15,17,19,21,23 & 25 A THREADS `B' `A' Thread T-Tie Wrap Class: A - Hard Anodic W - Aluminium, 500 hrs. Cadmium Olive Drab J - Composite cadmium olive drab M - Composite electroless F - Aluminium, 48 hrs. electroless nickel T- Nickel PTFE finish Variant 8 A - V1 M IL C5015 Reverse Bayonet Caps 97B - 25042 - XX & 97B 25043 - XX XX-Shell Size Other Accessories Protective cap for 97B series 97B-25042 For Plugs 'B' `A' 'D' 'E' + ONE LINK All dimensions are in mm INK MARK A CONN. NO. & BATCH CODE AS PER BOM. PART NUMBER SHELL SIZE 'A' MAX. 97 B - 25042 - 10SL 10 SL 21.0 97 B - 25042 - 14S 14 S 27.50 97 B - 25042 - 16S 16 S 97 B - 25042 - 16 16 97 B - 25042 - 18 18 33.50 97 B - 25042 - 20 20 37.0 97 B - 25042 - 22 22 40.0 97 B - 25042 - 24 24 43.0 97 B - 25042 - 28 28 49.50 97 B - 25042 - 32 32 56.0 97 B - 25042 - 36 36 62.50 97 B - 25042 - 40 40 68.50 'B' MAX. 'D' + 0.60/-0 'E' MIN. 90.0 23.50 4.30 30.0 100.0 115.0 4.70 130.0 5.50 190.0 'D' + 0.60/-0 'E' MIN. 31.50 Protective Cap For 97B Series 97B-25043 For Receptacle 'B' 'E' + ONE LINK 'A' 'D' INK MARK A CONN. NO. & BATCH CODE AS PER BOM. 97B-25043-XX-624-LXX-V1 97B- Reverse Bayonet caps MS- Threaded Caps 25042 - Caps for plug 25043 - Caps for receptacle Shell Size 10sl To 36 All dimensions are in mm PART NUMBER SHELL SIZE 'A' MAX. 97 B - 25043 - 10SL 10 SL 23.0 97 B - 25043 - 14S 14 S 30.0 97 B - 25043 - 16S 16 S 97 B - 25043 - 16 16 97 B - 25043 - 18 18 37.0 97 B - 25043 - 20 20 40.50 97 B - 25043 - 22 22 43.50 'B' + 0.20 16.0 90.0 32.50 97 B - 25043 - 24 24 47.0 97 B - 25043 - 28 28 54.0 97 B - 25043 - 32 32 60.50 97 B - 25043 - 36 36 67.0 97 B - 25043 - 40 40 73.0 4.30 100.0 115.0 20.70 5.50 160.0 Note :- Please add 07 suffix for bigger end link. Applicable for Jam Nut Cap w/o chain & rivet hole For non - std length specified in cm. A23 Electroless Nickel Finish 624 : Zn CO Black 622 : Zn Co Green 610 : Hard Anodize finish (Standard supplied Cadmium green colour) 9 M IL C5015 Threaded Caps MS - 25042-XY & MS - 25043 - XX XX-Shell Size Protective Cap For MS Series MS-25043 For receptacles Has internal threads and is used on all receptacles. Gasket is provided in the dust cap forming a watertight seal. A C MAX D B MAX E All dimensions are in mm MS Part number MS 25043-10 MS 25043-12 MS 25043-14 MS 25043-16 MS 25043-18 MS 25043-20 MS 25043-22 MS 25043-24 MS 25043-28 MS 25043-32 MS 25043-36 MS 25043-40 Shell size A Thread in inches B C D E 10S 12S 14S 16-16S 18 20 22 24 28 32 36 40 5/8-24 3/4- 20 7/8-20 1-20 1 1/8-18 1 1/4-18 1 3/8-18 1 1/2-18 1 3/4-18 2-18 2 1/4-18 2 1/2-16 11.11 11.11 11.11 11.11 11.11 11.11 11.11 11.11 12.7 12.7 12.7 12.7 20.7 25.4 28.6 30.2 34.1 37.3 40.4 43.6 50 56.3 62.7 69 3.6 3.6 3.6 3.6 3.6 4.4 4.4 4.4 4.4 4.8 4.8 4.8 102 115 115 115 115 127 127 140 197 197 197 197 Other Accessories Protective cap for MS series MS-25042 For plugs Has external threads and is used on all plugs where a coupling ring is provided. A D C MAX B MAX E All dimensions are in mm MS Part number Shell size A Thread in inches B C D E MS 25042-10 MS 25042-12 MS 25042-14 MS 25042-16 MS 25042-18 MS 25042-20 MS 25042-22 MS 25042-24 MS 25042-28 MS 25042-32 MS 25042-36 MS 25042-40 10S-1-SL 12-12S 14-14S 16-16S 18 20 22 24 28 32 36 40 5/8-24 3/4- 20 7/8-20 1-20 1 1/8-18 1 1/4-18 1 3/8-18 1 1/2-18 1 3/4-18 2-18 2 1/4-18 2 1/2-16 16.67 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 17.4 20.6 23.7 26.9 30 33 36.4 39.6 46 52 58.7 65 4 4 4 4 4 4.8 4.8 4.8 4.8 5.6 5.6 5.6 102 115 115 115 115 127 127 140 197 197 197 197 10 M IL C26482 Heavy Duty Cap 62IN - 1069 - XX For Receptacle C A `L' + 6.35 0 0 12 12 00 B D J Ordering Information FOR OTHER DETAILS & CONN. SPEC. REF.OUR 62IN CATALOGUE All Dimensions are in mm Shell Size `A' Min. `B' `C' Max 08 10 12 14 16 18 20 22 24 12.22 15.29 19.33 22.48 25.05 28.85 32.0 35.18 38.35 17.60 20.35 24.50 27.90 31.07 33.33 36.89 40.06 43.14 22.66 26.84 29.01 32.19 36.94 39.70 42.85 45.65 48.82 `D' `J' +0.25 +0.25 13.13 14.15 14.69 17.86 22. 64 25.81 28.99 32.16 35.35 38.51 41.68 62IN-1069-10-XXX `L' LENGTH 76.20 Series Shell Size D/Cap Type Plating Finish 88.90 101.60 All Dimensions for reference only MIL-C 1054 Dust Cap for 10 Pin Audio Connector 17.34 REF. 28.88 REF. 26.30 + 0.10 127.0 +ONE LINK 101.60 . +ONE LINK TYPE - 2 4.0 + 0.10 All dimensions in mm Dust Cap No. 164-377 164-377-714 164-377-01 164-377-01-714 TYPE - 1 11 Table 1 Link Type Type -2 Type-2 Type-1 Type-1 Cap Finish Black Anodised Cadmium Plate with Electroless Under Coat Black Anodised Cadmium Plate with Electroless Under Coat M IL DTL - 55116 Protective Caps For Audio connector (5 & 6 Pin) 23.50 Ref. 164-896 164-897 +16 Length = 100.0-0 6.35 +16 Length = 100.0-0 18.29 max. 18.80 max. 164-899 16 100+- 0.00 10.57 max 14.80 max 3. 50 100 +16 -0.0 10.57 max 164-898 1 1\ .7 19 21.82 max. 18.29 max. 18.80 max. 19.71\19.46 14.80 max 16 100+- 0.00 6 4 9. 114.80 max. 14.80 max. 10.57 max. 10.57 max. 164-895 18.29 max 18.80 max 18.29 max 19.71\19.46 4.83 18.80 max 164-900 100 +16 -0.0 21.82 max 14.80 max 10.57 max 14.27/13.54 19.71\19.46 23.50REF. 100 +16 -0.0 18.29 max 18.80 max ORDERING INFORMATION FOR 164 DUST CAP 164 895 Series Designation 164. MIL 55116 Audio Connector Caps CD LXX Special Deviation for length for standard none for Non std. mention length in mm Shell Style Finish Standard Black anodic caps CD - Cadmium olive green finish 622 - Zn Co olive green finish 624 - Zn Co black finish 895:-Receptacle dust caps for 5 & 6 pin audio connector with chain & solid ring 896:-Plug dust caps for 5 & 6 pin audio connector with chain & solid ring 897:-Receptacle dust caps for 5 & 6 pin audio connector with nylon rope & loop 898:-Receptacle dust caps for 5 & 6 pin audio connector with nylon rope & SS lug MATERIAL : Machined Alluminium Alloy Cover Gasket : Silicon elastomer : Stainless steel passivated Chain : Stainless steel passivated Ring SS Rope : Stainless steel teflon coated : Nylon (olive green) Rope Fastners : Stainless steel passivated 899:-Receptacle dust caps for 5 & 6 pin audio connector with SS rope & lug 900:-Plug dust caps for 5 & 6 pin audio connector with SS rope & loop 901:-Receptacle dust caps for 5 & 6 pin audio connector with nylon rope & solid ring 12 M IL C-22992 Dust Cap (AQWLD) Receptacle Dustcap (AQWLD-17349) A Thread L Protective Cover Gasket Rivet Link Ring Type All dimensions are in mm D G D MAX. E MIN. 0.875-0.1P-0.2L-DS 27.80 21.10 1.000-0.1P-0.2L-DS 31.00 22.10 AQWLD-17349C16* MS17349C16* 1.1250-0.1P-0.2L-DS 34.10 24.60 32.20 127.00 AQWLD-17349C18* MS17349C18* 1.250-0.1P-0.2L-DS 37.30 25.70 35.30 AQWLD-17349C20* MS17349C20* 1.375"-0.1P-0.2L-DS 39.70 28.40 38.50 AQWLD-17349C22* MS17349C22* 1.500"-0.1P-0.2L-DS 42.90 30.20 41.70 AQWLD-17349C24* MS17349C24* 1.750-0.1P-0.2L-DS 49.30 33.80 24.90 48.00 AQWLD-17349C28* MS17349C28* 2.000"-0.1P-0.2L-DS 56.40 37.60 54.40 AQWLD-17349C32* MS17349C32* 2.250-0.1P-0.2L-DS 62.70 41.10 60.70 AQWLD-17349C36* MS17349C36* 2.500-0.1P-0.2L-DS 69.10 45.00 67.10 2.750-0.1P-0.2L-DS 75.40 48.50 73.40 MS Part No. AQWLD-17349C12* MS17349C12* AQWLD-17349C14* MS17349C14* E Amphenol Part No. Chain Q Optional `A' Design AQWLD-17349C40* MS17349C40* *Add attaching ring A, B,or C. Plug Dustcap (AQWLD-17350) 38.10 max. A Thread Protective Cover A Thread 2B Double Start L MAX. G MIN. Q 25.80 19.43 29.00 152.40 All dimensions are in mm Amphenol Part No. MS Part No. A Thread 2A Double Start D H MAX. MIN. Q -0.0 +1 LINK AQWLD-17350C10* MS17350C10* 0.750-0.1P-0.2L-DS 20.60 18.30 Rivet D AQWLD-17350C12* MS17350C12* 0.875-0.1P-0.2L-DS 23.80 21.40 AQWLD-17350C14* MS17350C14* 1.000-0.1P-0.2L-DS 27.00 24.70 Chain AQWLD-17350C16* MS17350C16* 1.1250-0.1P-0.2L-DS 30.20 27.70 `Q' `B' Design 127.00 AQWLD-17350C18* MS17350C18* 1.250-0.1P-0.2L-DS 33.30 30.90 AQWLD-17350C20* MS17350C20* 1.375"-0.1P-0.2L-DS 36.50 34.00 AQWLD-17350C22* MS17350C22* 1.500"-0.1P-0.2L-DS 39.70 37.30 Chain AQWLD-17350C24* MS17350C24* 1.750-0.1P-0.2L-DS 46.00 43.60 AQWLD-17350C28* MS17350C28* 2.000"-0.1P-0.2L-DS 52.40 50.00 Wire Link RingType AQWLD-17350C32* MS17350C32* 2.250-0.1P-0.2L-DS 58.70 56.30 152.40 AQWLD-17350C36* MS17350C36* 2.500-0.1P-0.2L-DS 65.10 62.70 `H' AQWLD-17350C40* MS17350C40* 2.750-0.1P-0.2L-DS 71.40 70.60 *Add attaching ring A, B,or C. `C' Design Series AQWLD Ordering Information AQWLD 49 C 20 A Type AQWLD 17349 - Cap for Receptacle AQWLD 17350 - Cap for Plug Series Type Finish Size Design Finish N - Black Anodized (Non-conductive) C - Cadmium over electroless nickel (Conductive) Size 12 14 16 18 20 22 24 28 32 36 40 Design A - Chain & mounting ring B - Chain without ring C - Chain with clip 13 M IL 26482 Dummy Receptacle Gasket to be cemented to dust cap Shell Size 08 10 12 14 16 18 20 22 24 `B' Sq. 20.62 23.80 26.59 28.58 31.34 33.32 36.50 39.67 42.85 `C' +0.08 11.96 14.94 18.97 22.17 25.32 28.52 31.70 34.87 38.05. 62IN-3115-XX-XY Description code Series Shell size Plating Finish MIL 5015 Dummy Receptacle Bayonet Front Panel Mounting Dummy Receptacles Rear Side Closed SQ A E F C SQ B G `A' + 018 -0.20 97B-3105-10SL-CF 25.40 97B-3105-14SL-CF 30.00 97B-3105-16SL-CF 32.50 97B-3105-16-CF 32.50 97B-3105-18-CF 35.00 97B-3105-20-CF 38.00 97B-3105-22-CF 41.00 97B-3105-24-CF 44.50 97B-3105-28-CF 50.80 97B-3105-32-CF 57.10 97B-3105-36-CF 63.50 97B-3105-40-CF 69.90 Part No. `C' `D' `B' +0.10 +0.13 +0.00 -0.13 -0.00 18.20 18.20 3.20 23.00 23.00 3.20 24.60 24.60 3.20 24.60 24.60 3.20 27.00 30.80 3.20 29.40 34.20 3.20 31.80 37.40 3.20 34.90 40.90 3.70 39.70 46.70 3.70 44.50 53.40 4.30 49.20 59.60 4.30 55.50 65.50 4.30 D `E' +0.30 -0.00 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 22.20 `F' +0.18 `G' 2.80 3.20 3.20 3.20 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 97B-3105-10SL-CF-T4-R M4 M4 M4 M4 M4 M4 M4 M4 M5 M5 M5 M5 Connector Series Dummy Receptacle Shell Size CF - Closed Flange. HF - Hollow Flange Tapped Flange Holes (Standard Thru Holes) Rear Mount (Standard Front Mount) 14 M IL 5015 Bayonet Dummy Receptacle Front Panel Mounting Dummy Receptacles Rear Side Opened SQ A E SQ B F `A' + 018 -0.20 97B-3105-10SL-HF 25.40 97B-3105-14SL-HF 30.00 97B-3105-16SL-HF 32.50 32.50 97B-3105-16-HF 35.00 97B-3105-18-HF 38.00 97B-3105-20-HF 41.00 97B-3105-22-HF 44.50 97B-3105-24-HF 50.80 97B-3105-28-HF 57.10 97B-3105-32-HF 63.50 97B-3105-36-HF 69.90 97B-3105-40-HF c Part No. G `C' `D' `B' +0.10 +0.13 +0.00 -0.13 -0.00 18.20 18.20 3.20 23.00 23.00 3.20 24.60 24.60 3.20 24.60 24.60 3.20 27.00 30.80 3.20 29.40 34.20 3.20 31.80 37.40 3.20 34.90 40.90 3.70 39.70 46.70 3.70 44.50 53.40 4.30 49.20 59.60 4.30 55.50 65.50 4.30 `E' +0.30 -0.00 14.20 14.20 14.20 19.00 19.00 19.00 19.00 20.60 20.60 22.20 22.20 22.20 `F' +0.18 `G' 2.80 3.20 3.20 3.20 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 M4 M4 M4 M4 M4 M4 M4 M4 M5 M5 M5 M5 D Back Panel Mounting Dummy Receptacles Rear Side closed SQ A E SQ B F `C' `D' `E' `A' `B' `F' + 018 +0.13 +0.00 +0.10 +0.30 +0.18 -0.20 -0.13 -0.00 -0.00 97B-3105-10SL-CF 25.40 18.20 18.20 3.20 18.30 2.80 97B-3105-14SL-CF 30.00 23.00 24.60 3.20 18.30 3.20 97B-3105-16SL-CF 32.50 24.60 27.40 3.20 18.30 3.20 97B-3105-16-CF 32.50 24.60 27.40 3.20 23.15 3.20 97B-3105-18-CF 35.00 27.00 30.80 3.20 23.15 4.00 97B-3105-20-CF 38.00 29.40 34.20 3.20 23.15 4.00 97B-3105-22-CF 41.00 31.80 37.40 3.20 23.15 4.00 97B-3105-24-CF 44.50 34.90 40.90 3.70 23.15 4.00 97B-3105-28-CF 50.80 39.70 46.70 3.70 24.15 4.00 97B-3105-32-CF 57.10 44.50 53.40 4.30 24.15 4.00 97B-3105-36-CF 63.50 49.20 59.60 4.30 24.15 4.00 97B-3105-40-CF 69.90 55.50 65.50 4.30 24.15 4.00 c Part No. F G `G' M4 M4 M4 M4 M4 M4 M4 M4 M5 M5 M5 M5 D Front Back Mounting Dummy Receptacles Rear Side Opened SQ A E `C' `D' `E' `A' `B' `F' + 018 +0.13 +0.00 +0.10 +0.30 +0.18 -0.20 -0.13 -0.00 -0.00 97B-3105-10SL-HF 25.40 18.20 18.20 3.20 18.30 2.80 97B-3105-14SL-HF 30.00 23.00 24.60 3.20 18.30 3.20 97B-3105-16SL-HF 32.50 24.60 27.40 3.20 18.30 3.20 97B-3105-16-HF 32.50 24.60 27.40 3.20 23.15 3.20 97B-3105-18-HF 35.00 27.00 30.80 3.20 23.15 4.00 97B-3105-20-HF 38.00 29.40 34.20 3.20 23.15 4.00 97B-3105-22-HF 41.00 31.80 37.40 3.20 23.15 4.00 97B-3105-24-HF 44.50 34.90 40.90 3.70 23.15 4.00 50.80 39.70 46.70 3.70 24.15 4.00 97B-3105-28-HF 57.10 44.50 53.40 4.30 24.15 4.00 97B-3105-32-HF 63.50 49.20 59.60 4.30 24.15 4.00 97B-3105-36-HF 69.90 55.50 65.50 4.30 24.15 4.00 97B-3105-40-HF Part No. F c SQ B G D 15 `G' M4 M4 M4 M4 M4 M4 M4 M4 M5 M5 M5 M5 M IL 5015 Threaded Dummy Receptacle A B E Other Accessories Dummy receptacle MS-3105 OC O G D F MAX All dimensions are in mm Part number (see note) A B C 3.05 D Thread in inches 5/8-24 MS-3105-10S 25.4 18.26 MS-3105-12S 27.79 E F G 14.27 3.96 8.20 20.62 3.05 3/4-20 14.27 3.96 11.43 max. MS-3105-12 27.79 20.62 3.05 3/4-20 19.05 3.96 11.43 MS-3105-14S 30.17 23.01 3.05 7/8-20 14.27 3.96 13.36 MS-3105-14 30.17 23.01 3.05 7/8-20 19.05 3.96 13.36 MS-3105-16S 32.54 24.61 3.05 1-20 14.27 3.96 16.41 MS-3105-16 32.54 24.61 3.05 1-20 19.05 3.96 16.41 MS-3105-18 34.92 26.97 3.05 1 1/8-18 19.05 5.16 18.03 MS-3105-20 38.10 29.36 3.05 1 1/4-18 19.05 5.16 23.54 MS-3105-22 41.27 31.75 3.05 1 3/8-18 19.05 5.16 25.93 MS-3105-24 44.45 34.92 3.73 1 1/2-18 20.62 5.16 29.21 MS-3105-28 50.8 39.67 3.73 1 3/4-18 20.62 5.16 34.67 MS-3105-36 63.5 49.22 4.39 2 1/4-16 22.2 9.11 46.56 Note: The dash number also indicates shell size. MIL DTL 38999 Series III Dummy Receptacle +0.13 3.20-0.0 L M/KEYWAY D 60 + 0 5 0 15.90 + 0.05 Gasket To Be Cemented To Dust Cap A B THD First & Last THD. 300 G SQ. 13.20 After Plating Fully Mated Indicator Band Shell Size 09 11 13 15 17 19 21 23 25 Mil. Code A B C D E F G H J A +0.13 -0.0 11.23 14.48 17.32 20.50 23.67 26.34 29.51 32.69 35.86 `B' R H Thread D 5/8" 0.1P-.3LTS 3/4" 0.1P-.3LTS 7/8" 0.1P-.3LTS 1.0" 0.1P-.3LTS 1 3/16" 0.1P-.3LTS 1 1/4" 0.1P-.3LTS 1 3/8" 0.1P-.3LTS 1 1/2" 0.1P-.3LTS 1 5/8" 0.1P-.3LTS 31.75 34.93 38.10 41.28 44.45 47.63 50.80 55.58 60.33 `G' +0.23 -0.25 23.83 26.19 28.58 30.96 33.32 36.53 39.67 42.88 46.02 `L' Ordering Information 18.50 ITV22 - 09 - W Series 19.50 16 Shell Size Plating Finish I L Installing Tip H DIA H DIA Attachable Plug nsertion Removal Tool Removal Tip M M Insertion & Removal Tool 22.86 min. 22.86 min. IRT - XXX - XX Ordering Information Contact Size `A' Colour Code SR. NO MIL Part Number 1 2 3 4 5 M81969/14-01 M81969/14-11 M81969/14-10 M81969/14-03 M81969/14-04 Colour Code Amphenol Contact Installing Removal Part Number Size Tip Tip White IRT - 22D -GW 22D Green 20 IRT - 20 -RW White Red IRT - 20 -RO 20 Red Orange IRT - 16 -BW 16 Blue White IRT - 12 -YW 12 Yellow White `A' `M' `L' `H' max. min. max. max. 114.0 114.0 114.0 114.0 114.0 15.24 7.36 19.30 7.36 19.30 7.36 25.40 11.18 25.40 11.18 2.28 3.81 3.81 5.87 7.29 Backshell for D - SUB (M24308) Connector B A. METALLIC STRAIGHT CABLE HOUSING WITH CABLE CLAMP : D BACKSHELL FOR D- SUB (M24308) CONNECTOR: C L MAX A Ordering Information M2000/48 - 2 - X - XX Sr.No. MIL Part No. 1 2 3 4 5 M2000/48-2-1Z M2000/48-2-2Z M2000/48-2-3Z M2000/48-2-4Z M2000/48-2-5Z SERIES No. DASH No. SHELL SIZE FINISH DESIGNATOR FINISH : F - CADMIUM PLATE WITH YELLOW PASSIVATION Z - ZINC PLATE WITH YELLOW PASSIVATION TI - TIN PLATED 17 No. of PINS SHELL DENSITY SIZE STD HIGH 1 9 15 26 2 15 44 3 25 62 4 37 78 5 50 A B 30.70 12.40 39.00 12.40 52.90 12.40 69.20 12.40 66.80 15.25 C D L max max 24.99 10.30 33.32 10.30 47.04 15.10 63.50 18.30 61.11 18.30 27.80 27.80 28.60 28.60 28.60 B ackshell for D - SUB (M24308) Connector Hood for D-Sub (M24308) Connector Metal Hood (Straight Entry) L B D C 4-40 UNC SCREW A Ordering Information (Military Part Number) M2000 / X X -XXXX All Dimensions are in mm Sr. No. Series No. 01 02 03 04 05 Shell Size Finish Designator TypeMH- Metal Hood (Straight Entry) MHA- Metal Hood (Angle Entry) PH- Plastic Hood (Straight Entry) PHA- Plastic Hood (Angle Entry) MPH- Metallized Plastic Hood (Straight Entry) MPHA- Metallized Plastic Hood (Angle Entry) Shell Size 01 02 03 04 05 No. of Pins Density Std. High 09 15 15 26 25 44 37 62 50 78 `A' `B' `C' 31.50 40.80 54.20 69.20 67.10 15.60 15.60 16.00 16.00 18.00 24.99 33.30 47.00 63.50 61.10 `D' 6.00 10.00 10.00 10.20 12.30 * For angle entry please contact factory. FinishZ- Zinc Plate with yellow passivation F- Cadmium Plate with yellow passivation For nickel plated no suffix is required. Flange Mounting Gasket 62IN-760-XX (Replace XX with the required shell size) D Sq H F G E All dimensions in mm Shell D E F Dia G Dia size H max 8 20.62 15.08 12.90 3.30 1.06 10 23.82 18.26 16.07 3.30 1.06 12 26.18 20.65 19.25 3.30 1.06 14 28.57 23.01 22.42 3.30 1.06 16 30.96 24.61 25.60 3.30 1.06 18 33.32 27.00 28.77 3.30 1.06 20 36.52 29.36 31.95 3.30 1.06 22 39.70 31.75 35.13 3.30 1.06 24 42.87 34.92 38.30 3.96 1.06 18 `L' 47.60 48.20 48.80 48.60 48.60 F lange Mounting Gasket Other Accessories Plain flat gasket For MS and 97B flange mounted receptacles C B A O C A OD 4 HOLES T All dimensions are in mm Part number Shell size A max B C D MS-101000 MS-108686 MS-101001 MS-101002 MS-101003 MS-101004 MS-101005 MS-108687 MS-101006 MS-108688 MS-101007 MS-110831 10SL 12S & 12 14S & 14 16S & 16 18 20 22 24 28 32 36 40 18.26 20.62 23.01 24.61 27.00 29.36 31.75 34.90 39.70 44.45 49.22 55.77 15.90 19.05 22.20 25.40 28.57 31.75 34.90 38.10 44.45 50.80 55.57 61.92 25.40 27.80 30.15 32.50 34.90 38.10 41.20 44.45 50.80 57.15 63.50 69.85 4.35 4.35 4.35 4.35 5.15 5.15 5.15 5.15 5.15 5.55 5.55 5.55 T 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 *For Conductive and rear Mount Gasket contact factory. Notice : All information, including illustrations given herein is believed to be accurate at the time of printing. In lieu of design advances, Amphenol reserves the right to change specifications without notice. This publication Dust Cap Accessory Series Connectors AC ACC11 1211 supercedes all existing Amphenol literature on Dust Cap Accessory Series Connectors. 19 NORTH AMERICA Sales & Product Support Amphenol PCD 72 Cherry Hill Drive Beverly, MA 01915 USA Tel: +1-978-624-3400 Fax: +1-978-927-1513 info@amphenolpcd.com www.amphenolpcd.com www.backshellworld.com Amphenol Aerospace Operations 40-60, Delaware Avenue Sidney, NY 13838-1395 Tel: +1-607-563-5011 Fax: +1-607-563-5357 Amphenol Canada Meford Drive Scarborough, ON MIB 2X6 Tel: +416-291-4401 Fax: +416-292-0647 Amphenol Fiber Systems International 1300 Central Expressway North Suite 100 Allen,Texas 75013, USA Tel: +1-214-547-2400 Fax: +1-214-547-9344 EUROPE France United Kingdom Germany Italy Amphenol Socapex S.A.S. 948,Promenade de I'Arve Bp29, Thyez Cedex 74311, France Tel: +33-4-5089-2800 Fax: +33-4-5096-1941 Amphenol Limited Thanet Way, Whitstable Kent CT5 3JF, England Tel: +44-1227-773-200 Fax: 44-1227-276-571 Amphenol-Air LB GmbH Am Kleinbahnhof 4 Saarlouis D-66740, Germany Tel: 49-6831-9810-00 Fax: 49-6831-9810-30 Via Barbaiana 5 20020 Lainate (Milano) Italy Tel :+39-02-93254.209 +39-02-93254.214 Fax:+39-02-93254-444 Spain Austria Amphenol Iberica Edificio Burgosol Oficina N 55 C/Comunidad de Madrid 35 bis Las Rozas (Madrid) Tel: +34-91-6407302 +34-91-6407306 Fax:+34-91-6407307 Amphenol Austria Wiener Gasse 68 2380, Erchtoldsdarf, Austria Tel : + 43-69910396071 Fax: + 43-69940306071 Holland Amphenol Benelux Zadelmaker 121 NL-2401 PD Alphen aan den Rijn Holland Tel:+31-172-444903 Fax:+31-172 240254 Amphenol Air-LB Immeuble Le Doublon 11, Avenue Dobonnet Courbevoice-Cedex 92407, France Ph: +33-1-4905-3000 Fax: +33-1-4905-3043 Center & East Europe Amphenol Wiener Gasse 68 2380 Perchtoldsdorf Tel: +43-699-10396071 Fax: +43 699 40396071 Sweden Amphenol (Nordic & Baltic) Angsullsvagen 7 S-187 51 Taby. Sweden Tel: +46-85-1051816 +46-76-8418600 Fax: +46-70- 2634677 +46-70-2203197 ASIA India Amphenol Interconnect India Pvt. Ltd. 105 Bhosari Industrial Area Pune-411026, India Tel: +9120-3068-8305 Fax:+9120-2712-9158 Amphenol Interconnect India Pvt. Ltd. 61 Electronics City Bangalore-560 100, India Ph: +9180-2852-3838 Fax: +9180-2852-0418 Japan Amphenol Japan 471-1, Deba, Ritto City Shiga 520-3041, Japan Tel: +81-77-553-8501 Fax: +81-77-551-2200 Singapore Amphenol East Asia Ltd. 72 Bendemeer Road # 03-33 Luzerne Singapore 339 941 Tel: 65-6294-2128 Fax: 65-6294-3522 Korea Amphenol Daeshin Electronics 558 SoSa, SongNae, Bucheon-City Kyunggi-Do, Korea 420-130 Tel: +82-32-610-3800 Fax: +92-32-673-2507 China Amphenol PCD Shenzhen 3/F Building, A4 Songbai Industrial Park East Road of Minghuan Gongming Town, Baon District Shenchen, China Tel: +86-755-8173-8000 Fax: +86-755-8173-8180 ROW Australia Africa Russia Amphenol Australia Pty Ltd 2 Fiveways Boulevard Keysborough VIC 3173 Ph: +61-3-8796-8888 Fax: +61-3-8796-8801 Amphenol South Africa 30 Impala Road 2196 Sandton-Chistlehurston South Africa Tel: +27-11-783-9517 Fax: +27-11-783-9519 Amphenol Russia 8-2 Yaroslavskaja Str 129164 Moscow, Russia Tel: +7-495-937-6341 Fax: +7-495-937-6319 Israel Bar-Tec Ltd. P.O. Box 279 Kfar Sava, 44102 Israel Tel: +972-9-7644100 Fax: +972-9-7674324 Maslak 34396 Istanbul Tel: +90-212-335-2501 Fax: +90-212-335-2500 Brazil Amphenol do Brasil Ltda Rua Diogo Moreira 132 CEP 05423-010 Sao Paulo-SP, Brazil Tel: +55-11-3815-1003 Fax: +55-11-3815-1629 Argentina Amphenol Argentina Avenida Callao 930 2nd Floor, Office B Plaza C1023AAP Buenos Aires Argentina Tel: 54-11-4815-6886 Fax: 54-11-4814-5779 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Amphenol: MS3181-12CA MS3180-14RA MS318110N MS3181-10RAL MS3180-18C MS3181-12RA MS3180-10C MS31818CA MS318112N MS3181-14RA MS3181-24CA MS318122CA MS31808CA MS3181-8RA MS318116C MS3181-18NA MS3180-16CA MS318014CA MS3180-12C MS3180-10CA MS3180-12RAL MS318114CA MS318120NA MS3181-12RAL MS3180-8C MS3180-14C MS3181-18C MS318020CA MS3180-24CA MS3181-14C MS318018CA MS318118RA MS3180-8CAL MS3181-10NA MS3181-16CA MS3181-10RA MS31818C MS318122C MS318120CA MS318112CAL MS3180-22CA MS318122NA MS318116NA MS318012CA MS318110C MS3181-18CA MS318114NA MS318022CAL MS3180-14CA MS3181-18CL MS3180-14RW MS318110NL MS3181-20NW MS3180-16CL MS3181-08CA MS3181-16RA MS3181-08RA MS3181-24CL MS3181-08RW MS3181-10RW MS3181-08CL MS3181-08CW MS3181-24RL MS3181-14RW MS3181-14RL MS3181-18NL MS3180-18RW MS3181-08RL MS3180-24CL MS3181-20RW MS3180-14CL MS3181-22NL MS3181-22NW MS3180-18CW MS3180-16RA MS3181-14CL MS3180-08RW MS3180-12RW MS3181-12CL MS3180-20CL MS3181-10NW MS3180-24RW MS3180-16CW MS3180-24RA MS3180-18RA MS3181-14NL MS3181-20NL MS3181-16NW MS3181-12NA MS3181-12NW MS3181-16RW MS3181-12RW MS3180-08RA MS3180-10RW MS3181-24NW MS3181-12CW MS3181-08NA MS3181-10RL MS3181-14NW MS3181-10CW