DS26LV32AT
www.ti.com
SNLS128C APRIL 1999REVISED FEBRUARY 2013
DS26LV32AT 3V Enhanced CMOS Quad Differential Line Receiver
Check for Samples: DS26LV32AT
1FEATURES Available in SOIC and CLGA Packaging
Standard Microcircuit Drawing (SMD) 5962-
2 Low Power CMOS Design (30 mW typical) 98585
Interoperable with Existing 5V RS-422
Networks DESCRIPTION
Industrial and Military Temperature Range The DS26LV32A is a high speed quad differential
Conforms to TIA/EIA-422-B (RS-422) and ITU-T CMOS receiver that meets the requirements of both
V.11 Recommendation TIA/EIA-422-B and ITU-T V.11. The CMOS
DS26LV32AT features typical low static ICC of 9 mA
3.3V Operation which makes it ideal for battery powered and power
±7V Common Mode Range @ VID = 3V conscious applications. The TRI-STATE enables, EN
±10V Common Mode Range @ VID = 0.2V and EN*, allow the device to be active High or active
Low. The enables are common to all four receivers.
Receiver OPEN Input Failsafe Feature
Guaranteed AC Parameter: The receiver output (RO) is guaranteed to be High
when the inputs are left open. The receiver can
Maximum Receiver Skew: 4 ns detect signals as low as ±200 mV over the common
Maximum Transition Time: 10 ns mode range of ±10V. The receiver outputs (RO) are
Pin Compatible with DS26C32AT compatible with TTL and LVCMOS levels.
32 MHz Toggle Frequency
> 6.5k ESD Tolerance (HBM)
Connection Diagram
Top View
Figure 1.
SOIC Package
See Package Numbers D0016A or NAD0016A
1Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date. Copyright © 1999–2013, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
DS26LV32AT
SNLS128C APRIL 1999REVISED FEBRUARY 2013
www.ti.com
Truth Table(1)
Enables Inputs Output
EN EN* RI+–RIRO
L H X Z
All other VID +0.2V H
combinations of VID 0.2V L
enable inputs Open(2) H
(1) L = Logic Low
H = Logic High
X = Irrelevant
Z = TRI-STATE
(2) Open, not terminated
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings(1)(2)
Supply Voltage (VCC)0.5V to +7V
Enable Input Voltage (EN, EN*) 0.5V to VCC +0.5V
Receiver Input Voltage (VID: RI+, RI) ±14V
Receiver Input Voltage
(VCM: RI+, RI) ±14V
Receiver Output Voltage (RO) 0.5V to VCC +0.5V
Receiver Output Current (RO) ±25 mA Maximum
Maximum Package Power Dissipation @ +25°C
D0016A Package 1190 mW
NAD0016A Package 1087 mW
Derate D0016A Package 9.8 mW/°C above +25°C
Derate NAD0016A Package 7.3 mW/°C above +25°C
Storage Temperature Range 65°C to +150°C
Lead Temperature Range Soldering
(4 Sec.) +260°C
ESD Ratings (HBM, 1.5 kΩ, 100 pF)
Receiver Inputs and Enables 6.5 kV
Other Pins 2 kV
(1) “Absolute Maximum ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply
that the devices should be operated at these limits. The Electrical Characteristics specifies conditions of device operation.
(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.
Recommended Operating Conditions Min Typ Max Units
Supply Voltage (VCC) 3.0 3.3 3.6 V
Operating Free Air Temperature Range (TA)
DS26LV32AT 40 +25 +85 °C
DS26LV32AW 55 +25 +125 °C
2Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: DS26LV32AT
DS26LV32AT
www.ti.com
SNLS128C APRIL 1999REVISED FEBRUARY 2013
Electrical Characteristics (1) (2)
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified.
Parameter Test Conditions Pin Min Typ Max Units
VTH Differential Input Threshold VOUT = VOH or VOL VCM =7V to +7V, 200 ±17.5 +200 mV
TA= -40°C to
+85°C RI+,
VCM =0.5V to -200 +200 mV
RI
+5.5V, TA= -55°C
to +125°C(3)
VHY Hysteresis VCM = 1.5V 35 mV
VIH Minimum High Level Input 2.0 V
Voltage EN,
EN*
VIL Maximum Low Level Input 0.8 V
Voltage
RIN Input Resistance VIN =7V, +7V, TA= -40°C to +85°C 5.0 8.5 kΩ
(Other Input = GND)
VIN =0.5V, +5.5V, TA= -55°C to +125°C 5.0 kΩ
(Other Input = GND) (3)
IIN Input Current VIN = +10V TA= -40°C to 0 1.1 1.8 mA
+85°C RI+,
(Other Input = 0V, VIN = +3V 0 0.27 mA
RI
Power On, or VIN = 0.5V 0.02 mA
VCC = 0V) VIN =3V 0 0.43 mA
VIN =10V 0 1.26 2.2 mA
VIN =0.5V TA= -55°C to 0 -1.8 mA
+125°C (3)
VIN = 5.5V 0 1.8 mA
IEN Input Current VIN = 0V to VCC EN, ±1 μA
EN*
VOH High Level Output Voltage IOH =6 mA, VID = +1V 2.4 3 V
IOH =6 mA, VID = OPEN
VOH High Level Output Voltage IOH =100 μA, VID = +1V VCC 0.1 V
IOH =100 μA, VID = OPEN RO
VOL Low Level Output Voltage IOL = +6 mA, VID =1V 0.13 0.5 V
IOZ Output TRI-STATE Leakage VOUT = VCC or GND ±50 μA
Current EN = VIL, EN* = VIH
ISC Output Short Circuit Current VO= 0V, VID |200 mV| (4) 10 35 70 mA
ICC Power Supply Current No Load, All RI+, TA= -40°C to VCC 9 15 mA
R1= OPEN, EN, +85°C
EN* = VCC or GND TA= -55°C to 20 mA
+125°C
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
except VID.
(2) All typicals are given for: VCC = +3.3V, TA= +25°C.
(3) This parameter does not meet the TIA/EIA-422-B specification.
(4) Short one output at a time to ground. Do not exceed package.
Copyright © 1999–2013, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: DS26LV32AT
DS26LV32AT
SNLS128C APRIL 1999REVISED FEBRUARY 2013
www.ti.com
Switching Characteristics - Industrial (1) (2)
Over Supply Voltage and -40°C to +85°C Operating Temperature range, unless otherwise specified.
Parameter Test Conditions Min Typ Max Units
tPHL Propagation Delay High to Low CL= 15 pF, VCM = 1.5V (Figure 2 and Figure 3) 6 17.5 35 ns
tPLH Propagation Delay Low to High 6 17.8 35 ns
trRise Time (20% to 80%) 4.1 10 ns
tfFall Time (80% to 20%) 3.3 10 ns
tPHZ Disable Time CL= 50 pF, VCM = 1.5V (Figure 4 and Figure 5) 40 ns
tPLZ Disable Time 40 ns
tPZH Enable Time 40 ns
tPZL Enable Time 40 ns
tSK1 Skew, |tPHL tPLH|(3) CL= 15 pF, VCM = 1.5V 0.3 4 ns
tSK2 Skew, Pin to Pin (4) 0.6 4 ns
tSK3 Skew, Part to Part (2) 7 17 ns
fMAX Maximum Operating Frequency CL= 15 pF, VCM = 1.5V 32 MHz
(5)
(1) All typicals are given for: VCC = +3.3V, TA= +25°C.
(2) tSK3 is the difference in propagation delay times between any channels of any devices. This specification (maximum limit) applies to
devices within VCC ±0.1V of one another, and a Delta TA= ±5°C (between devices) within the operating temperature range. This
parameter is guaranteed by design and characterization.
(3) tSK1 is the |tPHL tPLH| of a channel.
(4) tSK2 is the maximum skew between any two channels within a device, either edge.
(5) All channels switching, Output Duty Cycle criteria is 40%/60% measured at 50%. Input = 1V to 2V, 50% Duty Cycle, tr/tf5 ns. This
parameter is guaranteed by design and characterization.
Switching Characteristics - Military
Over Supply Voltage and -55°C to +125°C Operating Temperature range, unless otherwise specified.
Parameter Test Conditions Min Max Units
tPHL Propagation Delay High to Low CL= 50 pF, VCM = 1.5V (Figure 2 and Figure 3) 6 45 ns
tPLH Propagation Delay Low to High 6 45 ns
tPHZ Disable Time CL= 50 pF, VCM = 1.5V (Figure 4 and Figure 5) 50 ns
tPLZ Disable Time 50 ns
tPZH Enable Time 50 ns
tPZL Enable Time 50 ns
tSK1 Skew, |tPHL tPLH|(1) CL= 50 pF, VCM = 1.5V 6 ns
tSK2 Skew, Pin to Pin (2) 6 ns
(1) tSK1 is the |tPHL tPLH| of a channel.
(2) tSK2 is the maximum skew between any two channels within a device, either edge.
4Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: DS26LV32AT
DS26LV32AT
www.ti.com
SNLS128C APRIL 1999REVISED FEBRUARY 2013
PARAMETER MEASUREMENT INFORMATION
A. Generator waveform for all tests unless otherwise specified: f = 1 MHz, Duty Cycle = 50%, ZO= 50Ω, tr10 ns, tf
10 ns.
B. CLincludes probe and jig capacitance.
Figure 2. Receiver Propagation Delay and Transition Time Test Circuit
A. Generator waveform for all tests unless otherwise specified: f = 1 MHz, Duty Cycle = 50%, ZO= 50Ω, tr10 ns, tf
10 ns.
B. CLincludes probe and jig capacitance.
C. For military grade product, tr6ns and tf6ns.
D. For military grade product the measure point is 1/2 VCC for tPLH, tPHL, tPZL, and tPZH.
Figure 3. Receiver Propagation Delay and Transition Time Waveform
Figure 4. Receiver TRI-STATE Test Circuit
Copyright © 1999–2013, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Links: DS26LV32AT
DS26LV32AT
SNLS128C APRIL 1999REVISED FEBRUARY 2013
www.ti.com
A. Generator waveform for all tests unless otherwise specified: f = 1 MHz, Duty Cycle = 50%, ZO= 50Ω, tr10 ns, tf
10 ns.
B. CLincludes probe and jig capacitance.
C. For military grade product, tr6ns and tf6ns.
D. For military grade product the measure point is 1/2 VCC for tPLH, tPHL, tPZL, and tPZH.
Figure 5. Receiver TRI-STATE Output Enable and Disable Waveforms
6Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: DS26LV32AT
DS26LV32AT
www.ti.com
SNLS128C APRIL 1999REVISED FEBRUARY 2013
TYPICAL APPLICATION INFORMATION
General application guidelines and hints for differential drivers and receivers may be found in the following
application notes:
AN-214
AN-457
AN-805
AN-847
AN-903
AN-912
AN-916
Power Decoupling Recommendations:
Bypass caps must be used on power pins. High frequency ceramic (surface mount is recommended) 0.1 μF in
parallel with 0.01 μF at the power supply pin. A 10 μF or greater solid tantalum or electrolytic should be
connected at the power entry point on the printed circuit board.
RTis optional although highly recommended to reduce reflection
Figure 6. Typical Receiver Connections
Figure 7. Typical Receiver Output Waveforms
Copyright © 1999–2013, Texas Instruments Incorporated Submit Documentation Feedback 7
Product Folder Links: DS26LV32AT
DS26LV32AT
SNLS128C APRIL 1999REVISED FEBRUARY 2013
www.ti.com
Figure 8. Typical Receiver Input Circuit
Figure 9. Typical ICC vs Frequency
Figure 10. Receiver IIN vs VIN (Power On or Power Off)
8Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: DS26LV32AT
DS26LV32AT
www.ti.com
SNLS128C APRIL 1999REVISED FEBRUARY 2013
Figure 11. IOL vs VOL
Figure 12. IOH vs VOH
Copyright © 1999–2013, Texas Instruments Incorporated Submit Documentation Feedback 9
Product Folder Links: DS26LV32AT
DS26LV32AT
SNLS128C APRIL 1999REVISED FEBRUARY 2013
www.ti.com
REVISION HISTORY
Changes from Revision B (February 2013) to Revision C Page
Changed layout of National Data Sheet to TI format ............................................................................................................ 9
10 Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: DS26LV32AT
PACKAGE OPTION ADDENDUM
www.ti.com 24-Aug-2018
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status
(1)
Package Type Package
Drawing Pins Package
Qty Eco Plan
(2)
Lead/Ball Finish
(6)
MSL Peak Temp
(3)
Op Temp (°C) Device Marking
(4/5)
Samples
DS26LV32ATM/NOPB ACTIVE SOIC D 16 48 Green (RoHS
& no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 DS26LV32A
TM
DS26LV32ATMX/NOPB ACTIVE SOIC D 16 2500 Green (RoHS
& no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 DS26LV32A
TM
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
PACKAGE OPTION ADDENDUM
www.ti.com 24-Aug-2018
Addendum-Page 2
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
DS26LV32ATMX/NOPB SOIC D 16 2500 330.0 16.4 6.5 10.3 2.3 8.0 16.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 10-Aug-2018
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
DS26LV32ATMX/NOPB SOIC D 16 2500 367.0 367.0 35.0
PACKAGE MATERIALS INFORMATION
www.ti.com 10-Aug-2018
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated (TI) reserves the right to make corrections, enhancements, improvements and other changes to its
semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers
should obtain the latest relevant information before placing orders and should verify that such information is current and complete.
TI’s published terms of sale for semiconductor products (http://www.ti.com/sc/docs/stdterms.htm) apply to the sale of packaged integrated
circuit products that TI has qualified and released to market. Additional terms may apply to the use or sale of other types of TI products and
services.
Reproduction of significant portions of TI information in TI data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such reproduced
documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements
different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the
associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Buyers and others who are developing systems that incorporate TI products (collectively, “Designers”) understand and agree that Designers
remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that Designers have
full and exclusive responsibility to assure the safety of Designers' applications and compliance of their applications (and of all TI products
used in or for Designers’ applications) with all applicable regulations, laws and other applicable requirements. Designer represents that, with
respect to their applications, Designer has all the necessary expertise to create and implement safeguards that (1) anticipate dangerous
consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and
take appropriate actions. Designer agrees that prior to using or distributing any applications that include TI products, Designer will
thoroughly test such applications and the functionality of such TI products as used in such applications.
TI’s provision of technical, application or other design advice, quality characterization, reliability data or other services or information,
including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to
assist designers who are developing applications that incorporate TI products; by downloading, accessing or using TI Resources in any
way, Designer (individually or, if Designer is acting on behalf of a company, Designer’s company) agrees to use any particular TI Resource
solely for this purpose and subject to the terms of this Notice.
TI’s provision of TI Resources does not expand or otherwise alter TI’s applicable published warranties or warranty disclaimers for TI
products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections,
enhancements, improvements and other changes to its TI Resources. TI has not conducted any testing other than that specifically
described in the published documentation for a particular TI Resource.
Designer is authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that
include the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE
TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY
RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or
endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
TI RESOURCES ARE PROVIDED “AS IS” AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR
REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO
ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL
PROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNER AGAINST ANY CLAIM,
INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF
PRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL,
DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN
CONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Unless TI has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949
and ISO 26262), TI is not responsible for any failure to meet such industry standard requirements.
Where TI specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such
products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards
and requirements. Using products in an application does not by itself establish any safety features in the application. Designers must
ensure compliance with safety-related requirements and standards applicable to their applications. Designer may not use any TI products in
life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use.
Life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life
support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, all
medical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S.
TI may expressly designate certain products as completing a particular qualification (e.g., Q100, Military Grade, or Enhanced Product).
Designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications
and that proper product selection is at Designers’ own risk. Designers are solely responsible for compliance with all legal and regulatory
requirements in connection with such selection.
Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer’s non-
compliance with the terms and provisions of this Notice.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2018, Texas Instruments Incorporated
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Texas Instruments:
DS26LV32ATM DS26LV32ATM/NOPB DS26LV32ATMX DS26LV32ATMX/NOPB