2
3
4
5
6
7
8
9
10
50
11
IP67 passive splitter boxes
Telefast™ ABE9 splitter boxes
Introduction
Passive ABE9 splitter boxes for M12 connectors make it possible to eliminate long
and difcult cabling operations. Due their modularity and their dimensions, they are
the ideal solution for a wide variety of customer applications.
Connection to the processing unit can be made either by connector or by multicore
cable of different lengths.
IP67 protection allows these products to be used within processes or machines in
harsh environments (splashing water, oil, dust, etc.).
The splitter boxes, available in 4 or 8 channel versions, allow connection of up to
16 signals maximum, depending on the version (2 per channel).
The specications of ABE9 splitter boxes C12 are as follows:
b Connection of sensors and actuators using M12, 5-pin connectors.
b Modularity: 4 or 8 channels.
b Mounting system and connection to the processing unit conforming to market
standards:
v mounting centers,
v M23, 19-pin connector, enabling the use of pre-formed cables in order to reduce
installation time and the risk of error,
v multicore cable, 5 or 10 m. The splitter box, consisting of a connection cover tted
with plug-in terminals, provides considerable exibility for:
- the replacement of damaged parts,
- modication of cable length.
Base units ABE9C12ppLpp enable the use of 2 separate commons which, for
example, can be used for the management of an emergency stop. This function is
accessible beneath the terminal cover using 2 removable links. If both links are
removed, the 2 supplies become independent.
The use of a Y-connector allows 2 signals to be connected to the same M12 channel
on the splitter box.
Example: splitter box ABE9C1281 (8 channels) enables the connection of 16 signals
to the processing unit.
The Y-connector is available in 2 versions:
b M12-M12 for connection of two M12 connectors to a single M12 channel on the
splitter box,
b M8-M12 for connection of two M8 connectors to a single M12 channel on the
splitter box.
Complete catalog number =Splitter box only +Connector with cable
ABE9C1240L05 = ABE9C1240M + ABE9XCA1405
ABE9C1240L10 = ABE9C1240M + ABE9XCA1410
ABE9C1241L05 = ABE9C1241M + ABE9XCA1405
ABE9C1241L10 = ABE9C1241M + ABE9XCA1410
ABE9C1280L05 = ABE9C1280M + ABE9XCA1805
ABE9C1280L10 = ABE9C1280M + ABE9XCA1810
ABE9C1281L05 = ABE9C1281M + ABE9XCA1805
ABE9C1281L10 = ABE9C1281M + ABE9XCA1810
Connector only
ABE9CM12C
Introduction