100W Constant Voltage + Constant Current LED Driver HVG-100 IP65 IP67 Features Wide input range 180 ~ 528VAC Constant Voltage + Constant Current mode output Metal housing with Classdesign Built-in active PFC function Class 2 power unit IP67 / IP65 rating for indoor or outdoor installations Function options: output adjustable via potentiometer; series Type HL Applications LED street lighting LED high-bay lighting Parking space lighting LED fishing lamp LED greenhouse lighting Type HL for use in Class, Division 2 hazardous (Classified) location. 3 in 1 dimming (dim-to-off); Timer dimming Typical lifetime>50000 hours 5 years warranty Description HVG-100 series is a 100W AC/DC LED driver featuring the dual mode constant voltage and constant current output. HVG-100 operates from 180~528 VAC and offers models with different rated voltage ranging between 15V and 54V. Thanks to the high efficiency up to 91%, with the fanless design, the entire series is able to operate for -40 ~ +90 case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HVG-100 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system. Model Encoding HVG - 100 - 20 A Function options Rated output voltage(15/20/24/30/36/42/48/54V) Rated wattage Series name Type A B IP Level IP65 IP67 AB IP65 D IP67 Function Io and Vo adjustable through built-in potentiometer. 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) Io and Vo adjustable through built-in potentiometer & 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) Built-in Smart timer dimming function by user request. Note In Stock In Stock In Stock By request File Name:HVG-100-SPEC 2018-09-30 100W Constant Voltage + Constant Current LED Driver HVG-100 series SPECIFICATION HVG-100-15 HVG-100-20 HVG-100-24 HVG-100-30 HVG-100-36 HVG-100-42 HVG-100-48 HVG-100-54 15V 20V 24V 30V 36V 42V 48V 54V CONSTANT CURRENT REGION Note.4 9~15V 10~20V 12~24V 4.8A 4A 21~42V 2.28A 27~54V 5A 18~36V 2.65A 24~48V RATED CURRENT 15~30V 3.2A 2A 1.77A RATED POWER 75W 96W 96W 96W MODEL DC VOLTAGE OUTPUT 150mVp-p 150mVp-p 200mVp-p RIPPLE & NOISE (max.) Note.2 150mVp-p Adjustable for A/AB-Type only (via the built-in potentiometer) VOLTAGE ADJ. RANGE 13.5 ~ 17V 17 ~ 22V 22 ~ 27V 27 ~ 33V Adjustable for A/AB-Type only (via the built-in potentiometer) 2.75 ~ 5A 2.64 ~ 4.8A 2.2 ~ 4A 1.76 ~ 3.2A CURRENT ADJ. RANGE VOLTAGE TOLERANCE Note.3 2.0% 200mVp-p 33 ~ 40V 38 ~ 46V 43 ~ 53V 49 ~ 58V 1.45 ~ 2.65A 1.25 ~ 2.28A 1.1 ~ 2A 0.97 ~ 1.77A 1.0% 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% Note.6 500ms, 80ms /230VAC, 347VAC, 480VAC 30ms/347VAC, 480VAC Note.5 180 ~ 528VAC 254VDC ~ 747VDC (Please refer to "STATIC CHARACTERISTIC" section) FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF0.98/230VAC, PF0.98/277VAC, PF0.97/347VAC, PF0.93/480VAC @full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) TOTAL HARMONIC DISTORTION THD< 20%(@ load50%/230VAC, 277VAC, 347VAC [@ load60% only for 15V model]; @ load75%/480VAC) (Please refer to "TOTAL HARMONIC DISTORTION (THD) " section) EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) MAX. No. of PSUs on 16A CIRCUIT BREAKER LEAKAGE CURRENT OVER CURRENT SHORT CIRCUIT OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. MAX. CASE TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION EMC 95.58W 200mVp-p 1.5% VOLTAGE RANGE SAFETY & 1.0% 96W 200mVp-p LOAD REGULATION HOLD UP TIME (Typ.) PROTECTION 1.0% 95.76W LINE REGULATION SETUP, RISE TIME INPUT 1.0% 95.4W 200mVp-p 89% 91% 90.5% 90% 91% 0.38A / 347VAC 0.28A / 480VAC COLD START 25A(twidth=900s measured at 50% Ipeak) at 480VAC; Per NEMA 410 90.5% 91% 91% 47 ~ 53V 54 ~ 60V 59 ~ 65V 5 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 480VAC <0.75mA / 480VAC 95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed Constant current limiting, recovers automatically after fault condition is removed 34 ~ 38V 23 ~ 27V 28 ~ 34V 41 ~ 46V 18 ~ 21V Shut down o/p voltage with auto-recovery or re-power on to recovery Shut down o/p voltage, recovers automatically after temperature goes down Tcase=-40 ~ +90(Please refer to "OUTPUT LOAD vs TEMPERATURE" section) Tcase=+90 20 ~ 95% RH non-condensing -40 ~ +80, 10 ~ 95% RH 0.03%/ (0 ~ 60) SAFETY STANDARDS 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750(type"HL"), CSA C22.2 No. 250.0-08, EAC TP TC 004, IP65 or IP67 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (@ load50% load,@ load60% only for 15V model) ; EN61000-3-3, FCC Part 15 Subpart B,EAC TP TC 020 EMC EMISSION I/P-FG:2KVAC O/P-FG:1.5KVAC Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV) , EAC TP TC 020 174.9K hrs min. MIL-HDBK-217F (25) 236*68*38.8mm (L*W*H) DIMENSION 1.18Kg; 12pcs/15.2Kg/0.74CUFT PACKING 1. All parameters NOT specially mentioned are measured at 347VAC input, rated load and 25 of ambient temperature. EMC IMMUNITY MTBF OTHERS NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Please refer to "DRIVING METHODS OF LED MODULE". 5. De-rating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details. 6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. 7. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 8. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80 or less. 9. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com. 10. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). 11. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf File Name:HVG-100-SPEC 2018-09-30 100W Constant Voltage + Constant Current LED Driver HVG-100 series Block Diagram Fosc : 80KHz I/P EMI FILTER & RECTIFIERS POWER SWITCHING PFC CIRCUIT RECTIFIERS & FILTER +V -V DIM+ DIM(B Type) O.L.P. FG O.L.P. PFC CONTROL PWM & PFC CONTROL DETECTION CIRCUIT O.V.P. O.T.P. DRIVING METHODS OF LED MODULE This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs. In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. 100 Should there be any compatibility issues, please contact MEAN WELL. (A) Constant Voltage area Vo(%) (B) Constant Current region 50 100 Io (%) Typical output current normalized by rated current (%) File Name:HVG-100-SPEC 2018-09-30 100W Constant Voltage + Constant Current LED Driver HVG-100 series DIMMING OPERATION FG (Green/Yellow) AC/L(Brown) AC/N(Blue) DIM+(Blue) DIM-(White) HVG-100 -V(Black) +V(Red) 3 in 1 dimming function (for B/AB-Type) Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 1 0 0A (typ.) Applying additive 0 ~ 10VDC 100% 90% -V + + - - DIM+ + Output current (%) 80% +V 70% 60% 50% 40% 30% Additive Voltage - 20% DIM- 10% "DO NOT connect "DIM- to -V" 0% 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): 100% 90% -V + + - - DIM+ Output current (%) 80% +V 70% 60% 50% 40% 30% Additive PWM signal 20% DIM- 10% "DO NOT connect "DIM- to -V" 0% Applying additive resistance: 100% 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input 90% -V + 80% + - - DIM+ Additive Resistance Output current (%) +V 70% 60% 50% 40% 30% DIM"DO NOT connect "DIM- to -V" 20% 10% 0% Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity for synchronized dimming operation ) Dimming input: Additive resistance Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< I out<8%. 2. The output current could drop down to 0% when dimming input is about 0k or 0Vdc, or 10V PWM signal with 0% duty cycle. File Name:HVG-100-SPEC 2018-09-30 HVG-100 100W Constant Voltage + Constant Current LED Driver series 100 100 80 80 60 60 LOAD (%) LOAD (%) OUTPUT LOAD vs TEMPERATURE(Note.9) 40 20 -40 -25 -10 0 15 30 50 60 (HORIZONTAL) 70 40 20 -40 -25 0 20 45 AMBIENT TEMPERATURE,Ta () 55 65 75 90 (HORIZONTAL) Tcase () STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC Tcase at 80 Constant Current Mode 100 1 .0 0 90 0 .9 8 0 .9 6 0 .9 4 70 0 .9 2 480V 60 0 .9 0 347V 0 .8 8 277V 50 0 .8 6 230V 40 0 .8 4 PF LOAD (%) 80 0 .8 2 180 347 440 480 0 .8 0 528 50% 60% 70% INPUT VOLTAGE (V) 60Hz 80% 90% 100% (100W) LOAD TOTAL HARMONIC DISTORTION (THD) EFFICIENCY vs LOAD HVG-100 series possess superior working efficiency that up to 91% can be reached in field applications. 48V Model, Tcase at 80 48V Model, Tcase at 80 0.96 25 0.92 0.88 15 230VAC 277VAC 10 347VAC 480VAC 5 EFFICIENCY(%) THD(%) 20 0.84 480V 0.80 347V 0.76 277V 0.72 230V 0.68 0.64 0 0.60 50% 60% 70% LOAD 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD File Name:HVG-100-SPEC 2018-09-30 100W Constant Voltage + Constant Current LED Driver HVG-100 series LIFE TIME 120 100 LIFETIME(Kh) 80 60 40 20 0 20 30 40 50 60 70 80 90 Tcase ( ) File Name:HVG-100-SPEC 2018-09-30 HVG-100 100W Constant Voltage + Constant Current LED Driver MECHANICAL SPECIFICATION Case No. 994 series Unit:mm A-Type 236 212 12 34.2 30020 tc Vo ADJ. 104.4 STW 18AWGx3C Io ADJ. 30020 SVT 18AWGx2C 34 9.4 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 68 9.4 9.6 -V(Black) +V(Red) 4.2x4PL : Max. Case Temperature 38.8 tc B-Type 236 212 12 9.6 68 tc tc 104.4 34 SVT 18AWGx2C 4.2x4PL DIM+(Blue) DIM-(White) -V(Black) +V(Red) : Max. Case Temperature 38.8 34.2 9.4 30020 UL2517 18AWGx2C STW 18AWGx3C 9.4 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 30020 File Name:HVG-100-SPEC 2018-09-30 HVG-100 100W Constant Voltage + Constant Current LED Driver series AB-Type 236 212 12 34.2 tc Vo ADJ. 104.4 30020 UL2517 18AWGx2C 34 4.2x4PL DIM+(Blue) DIM-(White) -V(Black) +V(Red) : Max. Case Temperature 38.8 tc Io ADJ. SVT 18AWGx2C STW 18AWGx3C 9.4 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 30020 68 9.4 9.6 D-Type 236 212 12 30020 68 tc 34 STW 18AWGx3C 104.4 SVT 18AWGx2C -V(Black) +V(Red) 4.2x4PL tc : Max. Case Temperature 38.8 30020 9.4 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 34.2 9.4 9.6 File Name:HVG-100-SPEC 2018-09-30 100W Constant Voltage + Constant Current LED Driver HVG-100 series WATERPROOF CONNECTION Waterproof connector Waterproof connector can be assembled on the output cable of HVG-100 to operate in dry/wet/damp or outdoor environment. AC source HVG-100 I/P O/P Size Size Pin Configuration (Female) M12 Order No. Suitable Current 4-PIN 5A/PIN M12-04 10A max. Pin Configuration (Female) M15 5-PIN 5A/PIN M12-05 10A max. 2-PIN 12A/PIN M15-02 12A max. Order No. Suitable Current LED Lamp Cable Joiner CJ04-1 suitable for 14AWG~16AWG CJ04-2 suitable for 18AWG~22AWG 20 25 66 26 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HVG-100 O/P Wires CJ04 cable joiner can be purchased independently for user's own assembly. MEAN WELL order No. : CJ04-1, CJ04-2. Junction Box Option 212 10 76 374 8.5 STW 18AWGx3C -V(Black) +V(Red) 32 68 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 61 8.5 6 5 SVT 18AWGx2C 2-5 3- PF 1/2" 3- PF 1/2" 15020 35 38.8 15020 Optional junction box available for A - type , please contact MEAW WELL for details. 86 INSTALLATION MANUAL Please refer to : http://www.meanwell.com/manual.html File Name:HVG-100-SPEC 2018-09-30