KMP_1700C_C03 Page 1 of 2
1700 Series
Radial Lead Inductors
www.murata-ps.com
www.murata-ps.com/support
For full details go to
www.murata-ps.com/rohs
FEATURES
n RoHS compliant
n Radial format
n Up to 1.8A IDC
n 10μH to 68mH
n Low DC resistance
n Miniature size
n PCB mounting
n MIL-I-23053/5 class III sleeving
n Fully tinned leads
n Supplied in packs of 20
n Compatible with RoHS soldering systems
n Backward compatible with
Sn/Pb soldering systems
n Custom parts available
DESCRIPTION
The 1700 Series is a general purpose range of
inductors suitable for low to medium current
applications. Their small footprint makes them
ideal for high density applications where a chip
inductor will not cope with the power requirement.
SELECTION GUIDE
Order Code
Inductance,
(1kHz, 0.1Vac)DC Current1DC Resistance Q at f kHz SRF
±10% Max. Max. Nom. Nom.
μH A Ω Q f MHz
17103C 10.0 1.80 0.05 65 1000 21.2
17153C 15.0 1.50 0.06 60 500 19.4
17223C 22.0 1.20 0.08 50 500 17.0
17333C 33.0 1.00 0.13 50 500 11.4
17473C 47.0 0.86 0.20 50 500 10.9
17683C 68.0 0.85 0.26 90 100 8.7
17104C 100.0 0.74 0.35 90 100 7.0
17154C 150.0 0.58 0.49 90 100 5.7
17224C 220.0 0.48 0.75 100 100 4.4
17334C 330.0 0.42 1.10 100 100 3.7
17474C 470.0 0.34 1.50 110 100 3.2
17684C 680.0 0.28 2.40 120 100 2.5
17105C 1.0mH 0.19 3.30 120 100 2.1
17155C 1.5mH 0.15 5.90 130 100 1.9
17225C 2.2mH 0.12 7.80 90 50 1.7
17335C 3.3mH 0.11 10.0 140 150 1.2
17475C 4.7mH 0.09 13.6 150 150 0.95
17685C 6.8mH 0.08 20.0 145 150 0.85
17106C 10.0mH 0.07 34.0 155 150 0.62
17156C 15.0mH 0.06 47.0 140 150 0.51
17226C 22.0mH 0.05 75.0 100 50 0.34
17336C 33.0mH 0.04 108.0 95 50 0.28
17476C 47.0mH 0.03 154.0 90 50 0.25
17686C 68.0mH 0.02 220.0 70 50 0.20
TYPICAL CORE/WIRE CHARACTERISTICS
Inductance Temperature
Coefficient
Resistance Temperature
Coefficient
Curie Temperature
(TC)
Saturation Flux
(BSAT)
350ppm 3900ppm 190°C 325mT
ABSOLUTE MAXIMUM RATINGS
Operating free air temperature range 0°C to 70°C
Storage temperature range -40°C to 125°C
SOLDERING INFORMATION2
Peak wave solder temperature 300˚C for 10 seconds
Pin finish Hot dipped tin
All specifications typical at TA=25°C
1 Maximum DC current occurs when either the inductance falls to 90% of its nominal value or when its temperature rise reaches 30°C,
whichever is sooner.
2 For further information, please visit www.murata-ps.com/rohs
KMP_1700C_C03 Page 2 of 2
1700 Series
Radial Lead Inductors
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice. © 2017 Murata Power Solutions, Inc.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
www.murata-ps.com/support
PACKAGE SPECIFICATIONS
MECHANICAL DIMENSIONS RECOMMENDED FOOTPRINT DETAILS
All dimensions in inches (mm). Package weight 1.3g Typ.
103C
0.256±0.20
All dimensions in inches (mm)
